How it Works
Numark
Loading...
iDJ3 MixVibes
Quick Start Manual
20 pgs4.71 Mb0

Numark iDJ3 MixVibes Quick Start Manual

QUICKSTART GUIDE
ENGLISH ( 1 – 3 )
GUÍA DE INICIO RÁPIDO
GUIDE D'UTILISATION RAPIDE
FRANÇAIS ( 7 – 9 )
GUIDA RAPIDA
ITALIANO ( 10 – 12 )
KURZANLEITUNG
DEUTSCH ( 13 – 15 )
1
BOX CONTENTS
iDJ3 Software CD Quickstart Guide Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your iDJ3. Registering your product ensures that we can keep you up-to-date with any new product developments and provide you with world-class technical support, should you run into any problems.
SETUP
PC
Before you can begin using the iDJ3 with your computer, you must install the necessary drivers onto your computer:
1. Please insert the included installation disc into your computer’s CD-ROM drive. DO NOT CONNECT THE iDJ3 YET!
2. Open the CD to view its contents.
3. Open the folder titled "1. Drivers – INSTALL THIS FIRST."
4. Double-click the file that matches your computer's operating system (32-bit Windows or 64-bit Windows).
5. Select your preferred language.
6. Click on Install the driver.
7. Read the User Agreement, select I accept the agreement, then click Install.
8. The installation procedure will begin. Please follow the on-screen instructions.
9. Once the installation has completed, you will need to restart your computer to use the software. Click Reboot
Now or Reboot Later.
Before getting started, install the Cross software:
1. Insert the included software CD into your computer's CD/DVD drive.
2. Open the contents of the CD and double-click "Install Cross – iDJ3 #.exe" to begin the software installation. (Note: instead of "#," the file name will have the software version number).
3. Follow the on-screen instructions.
To start using iDJ3:
1. Connect iDJ3 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your computer.)
2. Open Cross by double-clicking the icon on your computer's Desktop (if you created a Desktop shortcut) or by going to Start All Programs MixVibes Cross.
For more information on how to use Cross, see the manual on the CD: Go to Start All Programs MixVibes Cross. The manual will be a ".pdf" document in the language in which you chose to install the software.
MAC
Before you can begin using the iDJ3 with your computer, you must install the necessary drivers onto your computer:
1. Please insert the included installation disc into your computer’s CD-ROM drive. DO NOT CONNECT THE iDJ3 YET!
2. Open the CD to view its contents.
3. Open the folder titled "1. Drivers – INSTALL THIS FIRST."
4. Double-click the file that matches your computer's operating system (Mac).
5. Please double-click Install iDJ3 to begin the installation procedure.
6. You will see the screen on the left appear. Click Continue.
7. Select your hard-drive as a destination for the driver installation and click Continue.
8. Click on Install to begin the installation.
9. Enter your password and click OK.
10. You will see a warning that you will have to restart your computer once the installation is completed. To install the software, select Continue Installation.
11. Click Restart to restart your computer and complete the installation. Once your computer has restarted, please plug in the iDJ3.
2
Before getting started, install the Cross software:
1. Insert the included software CD into your computer's CD/DVD drive.
2. Open the contents of the CD and double-click "Cross – iDJ3 #.dmg" to begin the software installation. (Note: instead of "#," the file name will have the software version number).
3. Follow the on-screen instructions.
To start using iDJ3:
1. Connect iDJ3 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your computer.)
2. Open Cross by double-clicking the icon on your computer's Desktop (if you created a Desktop shortcut) or by going to Applications MixVibes.
For more information on how to use Cross, see the manual on the CD: Go to Applications MixVibes. The manual will be a ".pdf" document in the language in which you chose to install the software.
TOP PANEL FEATURES
1. HEADPHONES – Connect your 1/4" headphones to this output for cueing and mix monitoring.
2. MIC INPUT – Connect a 1/4" microphone to this input.
3. MIC GAIN – Adjusts the audio level of the microphone signal.
4. MASTER VOLUME – Adjusts the output volume of the Program mix.
5. CUE VOLUME – Adjusts the audio level of the Cue channel.
6. CUE SOURCE – Selects the audio that is sent to the headphones. Switch it to "MASTER" to hear the Program mix. Switch it to "A/B" to hear Decks A and B in the Cue channel. Switch it to "iPod" to hear iPod.
7. A/B CUE – Sends pre-fader audio to the Cue Channel for headphone monitoring.
8. BROWSE KNOB – Turn this knob to scroll through lists of tracks and directories in the software. When a directory is selected, press the knob to enter it.
9. LOAD A / LOAD B – Press one of these buttons while a track is selected to assign it to Deck A or Deck B, respectively.
10. CHANNEL FADER – Adjusts the audio level on the corresponding channel.
11. CROSSFADER – Blends audio playing between Decks A and B. Sliding this to the left plays Deck A and sliding to the right plays Deck B.
3
12. DOCK – Connect your iPod here. Gently rock the iPod back and forth over the connector when attaching or removing it.
13. DOCK ADJUSTER – Turn this knob accordingly so your docked iPod rests against the support.
14. JOG WHEEL – When the deck is playing, the JOG WHEEL will bend the track's pitch. When the SCRATCH button is on, the JOG WHEEL will scratch the selected track. When the deck is not playing, rotating the JOG WHEEL will scan through the track.
15. SCRATCH – Turns Scratch Mode on or off. If Scratch Mode is on, the button will light up and the JOG WHEEL will scratch like a turntable when you spin it. The LED will light up to indicate Scratch Mode is on.
16. WARP – Toggles through the available pitch fader modes in the software.
17. PLAY / PAUSE – Starts or resumes playback if the Deck is paused. Pauses playback if the Deck is playing.
18. STUTTER – Press this button while the music is playing to jump back to the last set cue point, creating a "stutter" effect.
19. CUE – The CUE button will return and pause the track at the last set cue point. For temporary play of the cue point, you can hold down the CUE button. The track will play for as long as the button is held down and will return to the cue point once it has been released.
You can hold down CUE and PLAY / PAUSE simultaneously to start playback from the cue point. Release both buttons to allow playback to continue.
20. SYNC – Automatically matches the corresponding Deck's tempo with the other Deck's tempo.
21. PITCH FADER – Controls the track's playback speed. An LED next to the fader will light up when set at 0%.
22. PITCH BEND ( + / – ) – Press or hold down either of these buttons to temporarily adjust the track's playback speed. When released, the track playback will return to the speed designated by the PITCH FADER.
23. CHANNEL BASS – Adjusts the low (bass) frequencies of the corresponding channel.
24. CHANNEL MID – Adjusts the mid-range frequencies of the corresponding channel.
25. CHANNEL TREBLE – Adjusts the high (treble) frequencies of the corresponding channel.
26. EQ KILL SWITCH – Pressing down on these buttons removing that frequency band (BASS, MID, or TREBLE) from the music on that deck. The button will illuminate when the EQ kill feature is engaged. To disengage it, press the button again.
27. REVERSE PLAY – Reverses playback of the Deck. Press the button again to resume normal forward playback.
28. AUTOLOOP – Automatically creates a 1-, 2-, 4-, or 8-beat loop from the current location in the track.
REAR PANEL FEATURES
1. CHARGE – Connect an optional 6V-1A power adapter (not included) if you want to charge an iPod while using iDJ3.
2. USB – This USB connection sends and receives control information to/from a connected computer. When plugged into your computer, the unit will draw power from the USB connection.
3. MASTER OUTPUT (RCA) – Use standard RCA cables to connect this output to a speaker or amplifier system. The level of this output is controlled by the MASTER VOLUME knob on the top panel.
Note: To hear the iPod's audio, iDJ3 must be connected to a computer via USB.
4
CONTENIDO DE LA CAJA
iDJ3 CD de software Guía de inicio rápido Folleto de información sobre la seguridad y la garantía
REGISTRO
Visite http://www.numark.com y registre su iDJ3. El registro de su producto asegura que podamos mantenerle actualizado con los nuevos desarrollos de productos y brindarle apoyo técnico de categoría mundial en caso de que tenga algún problema.
SETUP
PC
Antes de comenzar a usar la interfaz iDJ3 con su computadora, debe instalar en la misma los drivers necesarios:
1. Inserte el disco de instalación provisto en la lectora de CD-ROM de su computadora. ¡NO CONECTE LA iDJ3 TODAVÍA!
2. Abra el CD para ver su contenido.
3. Abra la carpeta llamada "1. Drivers – INSTALL THIS FIRST" (Drivers, instalarlos primero).
4. Haga doble clic en el archivo que corresponda al sistema operativo de la computadora (Windows de 32 bits o de 64 bits).
5. Seleccione su idioma preferido.
6. Haga clic en Install the driver (Instalar driver).
7. Lea el Acuerdo de Usuario, seleccione I accept the agreement (Acepto el acuerdo) y luego haga clic en Install (Instalar).
8. Comienza el procedimiento de instalación. Siga las instrucciones de la pantalla.
9. Una vez terminada la instalación, deberá reiniciar la computadora para usar el software. Haga clic en Reboot Now (Reiniciar ahora) o Reboot Later (Reiniciar más tarde).
Antes de comenzar, instale el software Cross:
1. Inserte el CD de software incluido en el lector de CD/DVD de la computadora.
2. Abra el contenido del CD y haga doble clic en "Install Cross – iDJ3 #.exe" para comenzar la instalación del software.
(Nota: en lugar de "#," el nombre del archivo contendrá el número de versión de software).
3. Siga las instrucciones de la pantalla.
Para comenzar a usar iDJ3:
1. Conecte iDJ3 a un puerto USB disponible de la computadora. (Si es posible, use un puerto USB del panel trasero de la
computadora.)
2. Abra Cross haciendo clic en el icono del escritorio de la computadora (si creó un acceso directo del escritorio) o
entrando a Start All Programs MixVibes Cross (Inicio > Todos los programas > MixVibes > Cross).
Para más información acerca del uso de Cross, consulte el manual incluido en el CD: Vaya a Start All Programs MixVibes Cross (Inicio > Todos los programas > MixVibes > Cross). El manual es un documento ".pdf" en el idioma en el que eligió instalar el software.
MAC
Antes de comenzar a usar la interfaz iDJ3 con su computadora, debe instalar en la misma los drivers necesarios:
1. Inserte el disco de instalación provisto en la lectora de CD-ROM de su computadora. ¡NO CONECTE LA iDJ3 TODAVÍA!
2. Abra el CD para ver su contenido.
3. Op Abra la carpeta llamada "1. Drivers – INSTALL THIS FIRST" (Drivers, instalarlos primero).
4. Haga doble clic en el archivo que corresponda al sistema operativo de la computadora (Mac).
5. Haga doble clic en Install iDJ3 (Instalar iDJ3) para comenzar el procedimiento de instalación.
6. Verá aparecer la pantalla de la izquierda. Haga clic en Continue (Continuar).
7. Seleccione su disco duro como destino de instalación del driver y haga clic en Continue.
8. Haga clic en Install para comenzar la instalación.
9. Introduzca su contraseña y haga clic en OK (Aceptar).
10. Aparecerá una advertencia de que debe reiniciar la computadora una vez terminada la instalación. Para instalar el software, seleccione Continue Installation (Continuar la instalación).
11. Haga clic en Restart (Reiniciar) para reiniciar su computadora y completar la instalación. Una vez reiniciada su computadora, enchufe el iDJ3.
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use