North Star M1146E User Manual
M1146E
4-Way Wedge Systems
Purpose:
4-Way Wedge System Assembly
1. Unbox and identify all parts.
Item Part Number Description Qty
1 82140 Cotter Pin 2
2 778321 Wedge 1
3 778329 Right Wing 1
4 778330 Left Wing 1
781151 4” Cylinder for 1146 1
5
6 778380 Left Keeper 1
7 778433 Anchor Block 1
8 778592 Pin, Cylinder to Anchor 1
9 778610 LS Warning Decal 1
10 778717 Log Stripper Decal 2
11 778723 Right Keeper 1
12
13 STNS4 4” x 9” NorthStar Decal 2
14 777891 Decal, Hydraulic Fluid 1
781152 4.5” Cylinder for 1147 1
781153 5” Cylinder for 1148 1
779138 Log Stripper wldt for 1146 1
779137 Log Stripper wldt for 1147 1
779136 Log Stripper wldt for 1148 1
Parts for building own 4-way log splitter.
Parts List
Any Questions, Comments, Problems, or Parts Orders
Call NorthStar Product Support 1-800-270-0810
®
1146, 1147, 1148
1
2. Requirements: 6” x 25 lb x 66.25” I-beam
3. Kit will be assembled as shown below.
4. Weld the anchor block onto the I-beam. Anchor block must be centered
on beam and completely welded.
5. Install cylinder onto anchor block with the supplied pin and cotter pins.
6. Log stripper weldment can be welded to the beam or bolted to a 10-gauge
(0.1345” thick) plate, which is welded to the beam. If welded to the
beam, a 10-gauge spacer must be placed between the log stripper
weldment and the beam to get the proper vertical height for the log
stripper weldment. The log stripper weldment must rest against the
cylinder face to operate properly, as shown below.
2
Loading...