Model N-084M-ASME
Tankless Water Heater
CERTIFIED
R
Item
Model Name
Type
Ignition
Operating Water Pressure
Minimum Flow Rate
Gas Supply Pressure
Dimensions
Weight
Water Holding Capacity
Connection
Sizes
Power
Material
Safety Devices
Included Accessories
Optional Accessories
Installation
Air-supply/Exhaust
Water Inlet
Hot Water Outlet
Gas Inlet
Supply
Consumption
Casing
Flue Collar
Heat Exchanger
Specification
N-084M-ASME
Indoor/Outdoor, Wall Hanging
Power Vented
Direct Ignition
15 - 150 PSI
0.7 GPM
NG : 5.0" - 10.5" LP : 10.5" - 14.0"
24.2"(Height) x 18.3"(Width) x 9.4"(Depth)
63 (pounds)
0.3 Gallon
3/4"
3/4"
3/4"
120VAC(60Hz)
NG: 80W LP: 93W Freeze Prevention 135W
Zincified Steel Plate / Acryl Coating
Stainless Steel
Copper Sheeting, Copper Tubing
Flame Rod, Thermal Fuse, Lightning Protection Device (ZNR), Electric Leakage Prevention Device(GFCI),
Overheat Prevention Device, Freezing Prevention Device, Fan Rotation Detector
Remote Cotroller, Remote Controller Cord, Anchoring Screws
Isolator EXP (#IK-WV-2), Outdoor Vent Cap (#VC-4-1), Pipe Cover (#PC-084), Remote Controller
Outdoor Junction Box (#RC-OJB), ScaleShield (#SS-HB-2), Quick-Connect Cable(#QC-1M),
Multi-System Controller (SC-201-6M)
NORITZ AMERICA CORPORATION
11160 Grace Avenue, Fountain Valley, CA 92708 Tel. 1-866-7NORITZ www.noritz.com
Model N-084M-ASME
Product Performance
Flow Rates
9
8
7
6
5
4
Flow Rate (GPM)
3
2
1
0
0 20 40 60 80 100 120 140
Temperature Rise (°F)
Temperature
Rise
Flow Rate
GPM
20 30 40 45 50 60 70 80 90 100 110 120 130
8.4 8.4 8.4 8.4 7.8 6.5 5.5 4.8 4.3 3.9 3.5 3.2 3.0
*For peak flow rates in shaded areas, contact Noritz for proper setting.
Pressure Loss
35
30
25
20
15
Pressure Loss (psi)
10
5
0
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
Set temperature: 135°F or higher
(Storage Tank Setting w/ System
Controller: 170~180°F)
Flow Rate (gpm)
Set temperature: 130°F or less
(Storage Tank Setting w/ System
Controller: 160°F or less)
Item Maximum Performance Minimum Performance
Gas
ConsumptionNGLP
35°F Rise
Hot Water
Capacity
45°F Rise
77°F Rise
100°F Rise
Capacity Range
Temperature Settings
Default Temperature Options
Features
Warranty
Approvals
236,000 btuh
236,000 btuh
8.4 Gal/min.
8.4 Gal/min.
5.0 Gal/min.
3.9 Gal/min.
0.7 - 8.4 Gal/min.
100-150°F (In 5°F intervals) ,160, 170, 180°F (14 Options)
120, 130, 140, 180°F (Default is 120°F)
Quick-Connect (2 units), Multi-System (Up to 24 units), Pump Control
5 years heat exchanger / 5 years parts
CSA, UPC, NSF, ASME
80
70
60
50
40
Ft of Head
30
20
10
0
21,000 btuh
21,000 btuh
Noritz America reserves the right to discontinue, or change at any time, the designs and/or specifications of its products without notice.
Rev.3/07