Norgren SNS12 User Manual

Features

For heavy duty applications with
sensor tip radial loads up to 60 lbs.

For use in weld applications
Immune to weld fields
Resistant to weld slag
Can be used to detect thread presence
Minimum nut thickness is

10.0 mm (.39")
Maximum blank thickness is

2.5mm (.10")

Technical Data

Sensor connector:

4-pin (male) 12mm (micro)
connector

Dimensions in. (mm)

Operating temperature range:

32°F to 212°F (0°C to 100°C)

Toughened Nut Sensor

SNS12

Target material:

Ferrous/Non-Ferrous

3.15 (80)

2X

.04 (1)

.31 (8)

.32 (8.1)

NOTE 5

.34 (8.6)

2.20 (55.9)

1.85 (47)

NOTE 2

NOTE 1

NOTE 4

.58 (14.7)

NOTE 3

Note 1 2X M12X 1.0

Note 2 2X M12 JAM NUTS

Note 3 SOLD SEPERATELY

Note 4 SOLD SEPERATELY

Note 5 SENSING ARE A

M12 Nut Detector System

Sensor Monitor Cable Weight

SNS12 SMH36012 (NPN) SCF12060 2m (6ft) .082 lbs / 37 gm

SMH37012 (PNP) SCF12160 2m (6ft) (Angled)

SEE ENGINEERING ADVANTAGE

Scan w ith a QR code reader – w ww.norgren.com/automationsoluti ons
Tel: [phone]

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren Automation Solutions, LLC 2013

001 25962 13232SP 12/4/12