Norgren SNS06 User Manual

Features

For Heavy Duty Applications with
sensor tip radial loads up to 50 lbs.

For use in weld applications.
Immune to weld fields.
Resistant to weld fields.
Resistant to weld slag.
Can be used to detect thread presence.
Can be used as a locating pin.
Minimum nut thickness is 5.0mm (.20")

for M6 nut
Maximum blank thickness is 1.6mm

(.0 6")

Technical Data

Sensor connector:

3-pin (male) 8mm (pico) connector

Operating temperature range:

32°F to 212°F (0°C to 100°C)

Toughened Nut Sensor

SNS06

Target material:

Ferrous/Non-Ferrous

Dimensions in. (mm)

2.70 (68.6)

NOTE 4

.35 (8.9)

NOTE 3

Note 1 2X M8X 1.0

Note 2 2X M8 JAM NUTS

Note 3 SOLD SEPERATELY

Note 4 SOLD SEPERATELY

Note 5 SENSING ARE A

2X

.04 (1)

.18 (4.5)

.20 (5.1)
NOTE 5

.16 (4.1)

2.15 (54.6)

1.85 (47)

NOTE 2

NOTE 1

M6 Nut Detector System

Sensor Monitor Cable Weight

SNS06 SMH36006 (NPN) SCE13000 2m (6f t) .037 lbs / 17 gm

SMH37006 (PNP) SCE13001 2m (6ft) (Angled)

SEE ENGINEERING ADVANTAGE

Scan w ith a QR code reader – w ww.norgren.com/automationsoluti ons
Tel: [phone]

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren Automation Solutions, LLC 2013

001 25962 13230SP 12/4/12