Norgren SNS05 User Manual

Features

For heavy duty applications with
sensor tip radial loads up to 38 lbs.

For use in weld applications
Immune to weld fields
Resistant to weld slag
Can be used to detect thread presence
Minimum nut thickness is 4.0 mm (.16")
Maximum blank thickness is

1.6mm (.06")

Technical Data

Sensor connector:

3-pin (male) 8mm (pico) connector

Dimensions in. (mm)

Operating temperature range:

32°F to 212°F (0°C to 100°C)

Toughened Nut Sensor

SNS05

Target material:

Ferrous/Non-Ferrous

2.70 (68.6)

2X

.16 (4)

.02 (0.5)

.23 (5.8)
NOTE 5

.11 (2.8)

2.15 (54.6)

1.85 (47)

NOTE 2

NOTE 1

NOTE 4

NOTE 3

Note 1 2X M8X 1.0

Note 2 2X M8 JAM NUTS

Note 3 SOLD SEPERATELY

Note 4 SOLD SEPERATELY

Note 5 SENSING ARE A

M5 Nut Detector System

Sensor Monitor Cable Weight

SNS05 SMH36005 (NPN) SCE13000 2m (6f t) .019 lbs / 9 gm

SMH37005 (PNP) SCE13001 2m (6ft) (Angled)

SEE ENGINEERING ADVANTAGE

Scan w ith a QR code reader – w ww.norgren.com/automationsoluti ons
Tel: [phone]

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren Automation Solutions, LLC 2013

REL 25962 13822SP 12/4/12