Norgren SNP50608 User Manual

Features

Abrasion and impact resistant.
For light duty applications with sensor

tip radial loads up to 30 lbs.
Exceptional for thread detection and

thread quality detection.
Immune to weld fields and resistant to

weld slag.
Minimum nut thickness is;

4.0mm (.16") for M5 nut

5.0mm (.20") for M6 nut

6.5mm (.26") for M8 nut
Maximum blank thickness

is 1.6mm (.06")

Technical Data

Sensor connector:

3-pin (male) 8mm (pico) connector

Operating temperature range:

32°F to 212°F (0°C to 100°C)

Nut Sensor

SNP50608

Target material:

Ferrous/Non-Ferrous

2.70 (68.6)

Dimensions in. (mm)

NOTE 5

.16 (4.0)

.25 (6.4)

.40 (10.2)

.10 (2.5)

1.75 (44.4)

NOTE 1

.35 (8.9)

NOTE 2

M5 Nut Detector System

Sensor Monitor Cable Weight

SNP50608 SMR36005 (NPN) SCE13000 2m (6f t) .029 lbs / 13 gm

SMR37005 (PNP) SCE13001 2m (6ft) (Angled)

NOTE 4

NOTE 3

Note 1 M8 X 1.0

Note 2 2X M8 JAM NUTS

Note 3 SOLD SEPERATELY

Note 4 SOLD SEPERATELY

Note 5 SENSING ARE A

M6 Nut Detector System

Sensor Monitor Cable Weight

SNP50608 SMR36006 (NPN) SCE13000 2m (6f t) .029 lbs / 13 gm

SMR37006 (PNP) SCE13001 2m (6ft) (Angled)

M8 Nut Detector System

Sensor Monitor Cable Weight

SNP50608 SMR36008 (NPN) SCE13000 2m (6f t) .029 lbs / 13 gm

SMR37008 (PNP) SCE13001 2m (6ft) (Angled)

SEE ENGINEERING ADVANTAGE

Scan w ith a QR code reader – w ww.norgren.com/automationsoluti ons
Tel: [phone]

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren Automation Solutions, LLC 2013

001 24251 00292SP 12/4/12