Norgren SNP01012 User Manual

Features

Abrasion and impact resistant.
For light duty applications with sensor

tip radial loads up to 35 lbs.
Exceptional for thread detection and

thread quality detection.
Immune to weld fields and resistant to

weld slag.
Minimum nut thickness is:

8.0mm (.31") for M10 nut

10.0mm (.39") for M12 nut
Maximum blank thickness

is 2.5mm (.10")

Technical Data

Sensor connector:

3-pin (male) 8mm (pico) connector

Operating temperature range:

32°F to 212°F (0°C to 100°C)

Nut Sensor

SNP01012

Target material:

Ferrous/Non-Ferrous

.3.15 (80)

Dimensions in. (mm)

NOTE 5

.30 (7.6)

.39 (10.0)

.70 (17.8)

1.75 (44.4)

NOTE 1

.35 (8.9)

NOTE 2

M10 Nut Detector System

Sensor Monitor Cable Weight

SNP01012 SMR36010 (NPN) SCE13000 2m (6f t) .037 lbs / 17 gm

SMR37010 (PNP) SCE13001 2m (6ft) (Angled)

NOTE 4

NOTE 3

Note 1 M8 X 1.0

Note 2 2X M8 JAM NUTS

Note 3 SOLD SEPERATELY

Note 4 SOLD SEPERATELY

Note 5 SENSING ARE A

M12 Nut Detector System

Sensor Monitor Cable Weight

SNP01012 SMR36012 (NPN) SCE13000 2m (6f t) .037 lbs / 17 gm

SMR37012 (PNP) SCE13001 2m (6ft) (Angled)

SEE ENGINEERING ADVANTAGE

Scan w ith a QR code reader – w ww.norgren.com/automationsoluti ons
Tel: [phone]

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren Automation Solutions, LLC 2013

002 24589 00325SP 12/4/12