Norgren SMR3xxxx User Manual
Features
Abrasion and impact resistant.
LED for on/off status of sensor.
Interface directly to programmable
controllers.
Minimum nut thickness is;
8.0mm (.31") for M10 nut
10.0mm (.39") for M12 nut
Maximum blank thickness is
2.5mm (.10")
Technical Data
Sensor connector:
2 X 3-pin terminal strips
Supply Voltage Range:
10VDC to 30 VDC
Maximum Load Current:
180mA
Operating temperature range:
32°F to 140°F (0°C to +60°C)
Response time:
25ms turn-on, 25ms turn-off
Indicator lights:
GREEN: DC power connect
AMBER: Target detected
Monitor for Nut Sensor
SMR3XXXX
Target material:
Ferrous/Non-Ferrous
Short circuit protection:
Yes
Overload protection:
Yes
Weight:
.091 lbs / 41 gms
2.36 (60.0)
Dimensions in. (mm)
0.71 (18.0)
1.97 (50.0)
NOTE 2
NOTE 1
0.16 (4.0)
DIA.
(4 PLCS.)
System Sensor Monitor Switc h type Cable
M5 Nut Detector SNP50608 SMR36005 (NPN)
SMR37005 (PNP)
M6 Nut Detector SNP50608 SMR36006 (NPN)
SMR37006 (PNP)
M8 Nut Detector SNP50608 SMR36008 (NPN)
SMR37008 (PNP)
M10 Nut Detector SNP01012 SMR36010 (NPN)
SMR37010 (PNP)
M12 Nut Detector SNP01012 SMR36012 (NPN)
SMR37012 (PNP)
0.79
(20.0)
2.76 (70.0)
0.35 (9.0)
2.20 (56.0)
Current sinking
Current sourcing
Current sinking
Current sourcing
Current sinking
Current sourcing
Current sinking
Current sourcing
Current sinking
Current sourcing
SCE13000 2m (6f t.)
SCE13001 2m (6ft) (Angled)
SCE13000 2m (6f t.)
SCE13001 2m (6ft) (Angled)
SCE13000 2m (6f t.)
SCE13001 2m (6ft) (Angled)
SCE13001 2m (6ft.)
SCE13001 2m (6ft) (Angled)
SCE13000 2m (6f t.)
SCE13001 2m (6ft) (Angled)
Note 1 SOLD SEPERATELY
Note 2 SOLD SEPERATELY
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Automation Solutions, LLC 2012
REL 23880 00293SP 12/4/12
Loading...