®
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or find that
there are missing parts, we will
guarantee you complete satisfaction through direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL
DIRECT TO OUR TOLL-FREE
CUSTOMER HOT LINE. The
trained technicians on our customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST
Model No. NTBE04991
Serial No.
Write the serial number in the space
above for reference.
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.
Serial
Number
Decal
USER’S MANUAL
Patent
Pending
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!
Part No. 172416 R1200A Printed in China © 2000 ICON Health & Fitness, Inc.
To order replacement parts, simply call our Customer Service Department toll-free at 1-888-825-2588, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give the following information when calling:
• The MODEL NUMBER of the product (NTBE04991)
• The NAME of the product (NordicTrack®GRT270 weight rack)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED
DRAWING at the center of this manual).
Ordering Replacement Parts
Limited Warranty
WHATIS COVERED—The entire NordicTrack®GRT270 weight rack (“Product”) is warranted to be free of all defects in material and workmanship.
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the product for one year after the date of purchase. Labor
is covered for one year.
WHATWE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component, providing
the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our option, we will
replace the Product.
WHATIS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or
installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and maintain as set out in
your User’s Manual (“Manual”).
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the Product as specified
in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as instructed, return any
defected part for replacement or, if necessary, the entire product, for repair.
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to do the periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-825-2588 and tell them your name and
address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange for service where your
Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return Authorization Number (RA
No.) from our Customer Service Department; securely pack your Product (save the original shipping carton if possible); put the RA No. on
the outside of the carton and insure the product. Include a letter explaining the product or problem and a copy of your proof of purchase if
you believe the service is covered by warranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance
of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs
of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a
particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an
implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty. This warranty gives you specific legal rights and you
may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
11
This section explains how the weight rack is adjusted. See the included exercise guide for important information
about how to perform a variety of exercises and how to get the greatest benefit from your exercise program.
Inspect and tighten all parts each time you use the weight rack. Replace any worn parts immediately. The weight
rack can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
Adjusting the Weight Rack
USING THE SAFETY SPOTTERS
To move a Safety Spotter (14, 15 [not shown]) to a new
position, grip the handle on one side of the Spotter Hook
(41, 42 [not shown]) and pull the Spotter Hook out of the
slot in the Upright (1). Raise or lower the Safety Spotter
to a new position and turn the Spotter Hook until it
engages one of the slots in the Upright.
14
41
1
Handle
USING THE LOCKING BAR AND SAFETY SPOTTERS
Before starting an exercise, position the Barbell (21) and
the Safety Spotters (14, 15) in the correct position for that
exercise.
To do this, stand in front of the cage and grip the Locking
Bar (20) with both hands. Turn the Locking Bar until the
two hooks disengage the slots in the Uprights (1). Move
the Locking Bar to a new position and turn the Locking
Bar until the hooks engage the slots in the Uprights.
Note: Always start an exercise with the Barbell (21)
positioned at the lowest point to which it will move
during the exercise.
Position both Safety Spotters (14, 15) directly under the
Weight Gliders (17, 18).
15
18
21
17
14
20
1
1
ATTACHING WEIGHTS TO THE BARBELL
To use the Barbell (21), slide the desired amount of
weight (not included) onto each end of the Barbell.
Secure the weights with the Large Weight Clips (39).
Note: To use standard weights, the Weight Adapters (19)
should be removed from the Barbell. Attach weights to
the Barbell with the Small Weight Clips (not shown).
21
19
39
WARNING: Always set both safety
spotters at the same height.
WARNING:Do not place more than
260 pounds on the barbell. Always secure the
weights with weight clips when they are on the barbell. Always place the same amount of weight on
each side of the barbell.
2
Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Part Identification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjusting the Weight System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Note: APart List/Exploded Drawing is attached in the center of this manual. Remove the Part List/Exploded
Drawing before beginning assembly.
Table of Contents
NordicTrack is a registered trademark of ICON Health & Fitness, Inc.
®
10
12. Place the Right Safety Spotter (14) on the right Base
(4) and center it over the indicated hole. Note: The
handle must point toward the center of the bench.
Have a second person hold the Locking Bar (20) so
that the Right Weight Glider (17) rests on top of the
Right Safety Spotter (14). Insert a Weight Guide (11)
into the Right Weight Glider, the Right Safety Spotter,
and the hole in the Base (4). Note: Tilt the Weight
Guide away from the Upright (1) as you insert it.
Attach the Weight Guide (11) to the Base (4) with an
M8 x 60mm Bolt (23), two M8 Washers (35), and an
M8 Nylon Locknut (37). Do not tighten the Nylon
Locknut yet.
14. Attach the upper end of one of the Weight Guides
(11) to the bracket on the Upright (1) with an M8 x
30mm Bolt (22) and an M8 Washer (35).
Attach the other Weight Guide (11) to the other
Upright (1) in the same manner.
Tighten all of the Nylon Locknuts used in steps 1
to 14.
15. Make sure that all parts are properly tightened
before you use the weight rack. The use of all
remaining parts will be explained in Adjusting the
Weight Rack starting on the following page.
37
1
14
4
Handle
Hole
23
35
17
20
11
12
22
11
35
1
14
3
1. Read all instructions in this manual before
using the weight rack. Use the weight rack
only as described in this manual.
2. It is the responsibility of the owner to ensure
that all users of the weight rack are adequately informed of all precautions.
3. The weight rack is intended for home use
only. Do not use the weight rack in a commercial, rental, or institutional setting.
4. Use the weight rack only on a level surface.
Cover the floor beneath the weight rack to
protect the floor or carpet.
5. Inspect and tighten all parts each time you
use the weight rack. Replace any worn parts
immediately.
6. Keep children under 12 and pets away from
the weight rack at all times.
7. Keep hands and feet away from moving
parts.
8. Always wear athletic shoes for foot protection while exercising.
9. Always make sure that there is an equal
amount of weight (not included) on each side
of the barbell.
10. Always secure your weights (not included)
with weight clips when they are mounted on
the barbell.
11. Always set both safety spotters at the same
height.
12. The weight rack is designed to support a
maximum of 560 pounds, including the user,
a barbell and weights (not included). Do not
place more than 310 pounds, including the
barbell, on the weight gliders and safety
spotters.
13. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
14. The decal shown below has been placed on
the weight rack in the indicated location. If
the decal is missing or illegible, please call
our Customer Service Department toll-free at
1-888-825-2588 to order a free replacement
decal. Apply the decal in the indicated location.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
WARNING: To reduce the risk of serious injury, read the following important precau-
tions before using the weight rack.
Important Precautions
13. Note: If you are not planning to use Olympic
weights with the weight rack, you do not need to
perform this step. Keep the two Weight Adapters
(19) in a safe place in case you need them in the
future.
Fully engage the indicated hook on both sides of
the weight rack before beginning this step.
Insert a 50mm Bushing (30) into the end of a Weight
Adapter (19). With a second person holding the
Barbell (21) so that it cannot turn, use the allen
wrench to secure the Weight Adapter to the Barbell
with a Large Washer (28) and an M10 x 25mm Button
Head Bolt (27). Note: The Large Washer must fit
into the indentation in the 50mm Bushing in the
Weight Adapter.
Pull the remaining length of the Barbell (21) in the
direction shown. Next, tighten the M8 x 20mm
Screws used in steps 9 and 10. Attach the other
Weight Adapter (19) to the other end of the Barbell
(21) in the same manner.
19
21
Hook
28
30
27
13
Loading...