NordicTrack APEX 6500 NTL18907.0, APEX 6500, NTL18907.0 User Manual

Page 1
Model No. NTL18907.0
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!
Find the serial number in the location shown below. Write the serial number in the space above for reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com­mitted to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.
USER'S MANUAL
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB: www.nordictrackservice.com
CAUTION
Read all precautions and instruc tions in this manual before using this equipment. Save this manual for future reference.
-
Page 2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
NordicTrack is a registered trademark of ICON IP, Inc.
2
Page 3
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure hat all users of this treadmill are adequately
t informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should not be used by persons
weighing more than 325 pounds.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothes while
using the treadmill; do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women.
Always wear athletic shoes; never use the treadmill with bare feet, wearing only stockings, or in sandals.
10. When connecting the power cord (see page 10), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.
11. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. To purchase a surge suppressor, see your local NordicTrack dealer or call the toll­free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.
12. Failure to use a properly functioning surge uppressor could result in damage to the con-
s trol system of the treadmill. If the control sys­tem is damaged, the walking belt may change speed, accelerate, or stop unexpectedly, which may result in a fall and serious injury.
13. Keep the power cord and the surge suppres-
sor away from heated surfaces.
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 26 if the tread­mill is not working properly.)
15. Read, understand, and test the emergency
stop procedure before using the treadmill (see HOW TO TURN ON THE POWER on page 12).
16. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the handrails while using the treadmill.
17. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid sudden jumps in speed.
18. The pulse sensor is not a medical device.
Various factors, including the user's move­ment, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.
19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug the power cord, and switch the reset/off circuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the reset/off circuit breaker.)
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 24.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
Do not change the incline of the treadmill by
21.
placing objects under the treadmill.
3
Page 4
2. When folding or moving the treadmill, make
2
sure that the storage latch is fully closed.
3. Always remove iFIT cards from the iFIT slot
2
when you are not using them.
24. Inspect and properly tighten all parts of the readmill regularly.
t
he treadmill, and before performing the main-
t tenance and adjustment procedures de­scribed in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing
ther than the procedures in this manual
o should be performed by an authorized service representative only.
25. Never insert or drop any object into any
opening.
27.
DANGER: Always unplug the power
cord immediately after use, before cleaning
26. The treadmill is intended for in-home use only. Do not use the treadmill in a commer­cial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. damage sustained by or through the use of this product.
ICON assumes no responsibility for personal injury or property
SAVE THESE INSTRUCTIONS
The decals shown here have been placed on the treadmill. If a decal is missing or il­legible, call the toll-free telephone number on the front cover of this manual, and re­quest a free replacement decal. Apply the decal in the location shown. Note: The decal may not be shown at actual size.
4
Page 5
BEFORE YOU BEGIN
Thank you for selecting the revolutionary NordicTrack
PEX 6500 treadmill. The APEX 6500 treadmill offers
A a selection of features designed to make your work­outs at home more enjoyable and effective. And when you’re not exercising, the unique APEX 6500 treadmill
an be folded up, requiring less than half the floor
c space of other treadmills.
For your benefit, read this manual carefully before using the treadmill
Accessory Tray
Handrail
. If you have questions after read-
®
ing this manual, please see the front cover of this man-
al. To help us assist you, note the product model
u number and serial number before contacting us. The model number of the treadmill is NTL18907.0. The ser­ial number can be found on a decal attached to the
readmill (see the front cover of this manual for the lo-
t cation).
Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.
Console
Pulse Sensor
Fan
Latch Knob
Walking Belt
Foot Pad
Rear Roller Adjustment Bolts
Key/Clip
Reset/Off
Circuit Breaker
Power Cord
5
Page 6
ASSEMBLY
Star Washer (67)–4
Screw (7)–2
1” Tek Screw (82)–4
Cage Nut (70)–3
Base Plate Bolt (77)–3
Handrail Bolt (72)–4
ssembly requires two persons.Set the treadmill in a cleared area and remove all packing materials. Do not
A dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key and your own phillips screwdriver , standard screwdriver , and wire cutters . For help identifying the assembly hard­ware, see the hardware drawings below. To avoid damaging plastic parts, do not use power tools for as­sembly.
1. With the help of a second person, tip the Upright (20) down as shown.
Insert the three Cage Nuts (70) into the three in­dicated holes in the treadmill. To insert each Cage Nut, first hook one side of the Cage Nut into a hole. Then use a standard screwdriver to press the other side of the Cage Nut into the hole, as shown
1
20
70
70
6
Page 7
2. Attach the four Base Pads (81) to the bottom of the Upright (20) with the four 1” Tek Screws (82) in the locations shown.
2
3. Remove the band securing the Upright Wire Harness (73) to the right Upright (20). Have a second person hold the console assembly near the right Upright.
Connect the Upright Wire Harness (73) to the console wire extending from the console assem­bly. Make sure to connect the connectors
properly (see the inset drawing). The connec­tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Then, insert the connectors into
the right Upright (20).
82
81
81
82
82
81
20
82
81
3
Console Assembly
Console Wire
73
20
73
4. Carefully set the console assembly onto the top of the Upright (20) as shown.
Make sure that no
wires are pinched. Attach the console assem
bly to the Upright with four Star Washers (67) and four Handrail Bolts (72). Start all four
Handrail Bolts before tightening them.
4
Console Assembly
-
72
67
67
20
7
Page 8
5. Attach the Latch Housing (34) to the left Upright (20) with two Screws (7); start both Screws
and then tighten them. Note: Make sure that the large hole in the Latch Housing is on the indicated side.
5
Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Next, insert the pin into the Latch Housing (34). Then, tighten the knob onto the pin.
6. With the help of a second person, raise the Walking Platform (15) to the storage position and make sure that the latch pin is engaged as de­scribed on page 24.
Position the Base Plate (75) on the treadmill as shown. Attach the Base Plate to the Upright (20) with the three Base Plate Bolts (77). Note: It may be helpful if a second person tips the treadmill slightly as you tighten the Bolts.
34
20
Knob
7
Spring
Collar
Pin
6
15
77
Carefully lower the Walking Platform (15) to the floor as described on page 25.
75
20
7. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place. The hex key is used to adjust the walking belt (see page 27).
To protect the floor or car
pet from damage, place a mat under the treadmill.
-
8
Page 9
If you purchase the optional chest pulse sensor (see page 23), follow the steps below to install the re­ceiver included with the chest pulse sensor.
ake sure that the power cord is unplugged.
1.M
emove the indicated Screws (7) from the back
R
1
105
of the Console Base (98).
98
7
7
2. While a second person holds the Console (105),
connect the wire on the receiver (A) to the indi­cated wire extending from the Console.
Next, hold the receiver so the small cylinder is ori­ented as shown and is facing away from the Console. Attach the receiver to the Console in
the location shown with the two included Small Screws (B).
3. Make sure that no wires are pinched. See drawing 1. Reattach the Console (105) to the Console Base (98) with the Screws (99). Discard the other wires included with the receiver.
7
7
7
7
7
2
Wire
A
98
Cylinder
105
B
9
Page 10
OPERATION AND ADJUSTMENT
HE PRE-LUBRICATED WALKING BELT
T
Your treadmill features a walking belt coated with high­performance lubricant. IMPORTANT: Never apply sil-
cone spray or other substances to the walking
i
elt or the walking platform. Such substances will
b deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
DANGER: Improper connection
of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or service­man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor, see your local NordicTrack dealer or call the toll-free telephone number on the front cover of this man­ual and order part number 146148, or see your local electronics store.
ric shock. This product is equipped with a cord having
t an equipment-grounding conductor and a grounding plug.
Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
utlet that is properly installed and grounded in
o
ccordance with all local codes and ordinances.
a Important: The treadmill is not compatible with GFCI-equipped outlets.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus­trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.
1
Grounded Outlet Box
Surge Suppressor
Grounding Pin
Grounding Pin
Grounded Outlet
2
Grounded Outlet Box
Adapter
Grounding Plug
Surge Suppressor
Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup­pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a moni­toring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpect­edly, which may result in a fall and serious injury.
This product must be grounded.
tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec
If it should malfunc
Lug
Metal Screw
The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.
The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw.
covers are not grounded. Contact a qualified elec-
-
trician to determine if the outlet box cover is grounded before using an adapter.
-
Some 2-pole receptacle outlet box
10
Page 11
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of features designed to make your workouts more effec­tive and enjoyable. When the manual mode of the con­sole is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you ex­ercise, the console will display continuous exercise feedback. You can even measure your heart rate using the handgrip pulse sensor or the optional chest pulse sensor (see page 23).
In addition, the console features ten Cardio programs. Each program automatically controls the speed and in cline of the treadmill as it guides you through an effec tive workout. The console also offers two Pulse pro­grams that control the speed and incline of the treadmill to help you keep your heart rate near target heart rate settings. You can even create your own Record pro grams and save them for future use. Note: The Pulse programs require the use of the optional chest pulse sensor.
The console also features the new iFIT Interactive Workout system. The iFIT system enables the console to accept iFIT Interactive Workout Cards containing workout programs designed to help you achieve spe­cific fitness goals.
For example, lose unwanted pounds
-
-
with the 8-week Weight Loss program, or train for a long-distance run with the Marathon program. iFIT pro­grams automatically control the treadmill while the voice of a personal trainer coaches you and motivates you through every step of your workout. One iFIT Card with three new programs is included. Additional iFIT Cards are available separately.
Cards at any time, go to www.iFIT.com or call the toll-free telephone number on the front cover of this manual. iFIT Cards are also available at select stores.
You can even listen to your favorite workout music or
-
audio books with the console’s MP3 stereo sound sys tem.
To turn on the power, follow the steps on page 12. To personalize console settings, see page 12. To use the manual mode, see page 14. To use a Cardio pro gram, see page 16. To use a Pulse program, see
page 18. To create and use a Record program, see pages 20 and 21. To use an iFIT card, see page 22. To use the stereo sound system, see page 23.
Note: If there is a sheet of clear plastic on the console, peel off the clear plastic.
To purchase iFIT
-
-
1
1
Page 12
OW TO TURN ON THE POWER
H
Plug in the power cord
1
(see page 10). Next, locate the reset/off cir-
uit breaker on the
c treadmill frame near the power cord. Make sure that the circuit breaker is in the reset position.
Reset
Position
When the User/Enter button is pressed, the words “User 1 Selected” or “User 2 Selected” will appear in the display. To identify yourself as User 1 or User 2, press the User/Enter button once or twice.
Stand on the foot
2
rails of the tread­mill. Find the clip attached to the key, and slide the clip securely onto the waistband of your clothes. Next, in­sert the key into the console. After a moment, the display will light.
situation, the key can be pulled from the con­sole, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the position of the clip.
Note: To prevent damage to the walking platform, wear clean athletic shoes while using the tread­mill. The first time the treadmill is used, observe the alignment of the walking belt, and center the walking belt if necessary (see page 27).
HOW TO PERSONALIZE CONSOLE SETTINGS
The console features a user mode that allows you to designate yourself as User 1 or User 2, view your workout history, and enter user information before you begin exercising.
The console also features a settings mode that allows you to select a system of measurement for the con­sole, turn on and turn off the demo mode, enter an audio trainer setting, adjust the volume and contrast settings of the console, and turn on and turn off the welcome screen.
Follow the steps below to personalize console settings.
Important: In an emergency
Key
Clip
Important: To highlight options within the menu, press the increase and decrease but­tons beside the User/Enter button.
View your workout history.
2
The display will show the total number of miles or kilometers that the walking belt has moved, the total number of hours that the treadmill has been used, and the total number of calories that the user has burned.
To reset any of the totals, first highlight the total that you want to reset and press the User/Enter button. Then, highlight NO or YES and press the User/Enter button.
Enter user information.
3
Highlight the words USER WEIGHT and then press the User/Enter button. Next, press the in­crease and decrease buttons beside the User/Enter button to enter your weight. Then, press the User/Enter button.
If you want to enter a maximum target heart rate (see HOW page 18), first highlight MAX HEART RATE and press the User/Enter button. Next, press the in­crease and decrease buttons beside the User/Enter button to enter a maximum target heart rate. Then, press the User/Enter button.
TO USE A
PULSE PROGRAM on
Select the user mode.
1
To select the user mode, press the User/Enter button. The console can keep track of workout history and save information for two different users.
To exit the users mode, highlight START and then press the User/Enter button.
12
Page 13
Select the settings mode.
4
o select the settings mode, first remove the key
T from the console. Then, hold down the Stop but-
on while reinserting the key into the console.
t
When the settings mode is selected, the display will show the word ENGLISH or METRIC to indi­cate which system of measurement is selected. To change the system of measurement, first highlight UNITS and press the User/Enter button. Next, press the increase or decrease button beside the User/Enter button to select the desired system of measurement. Then, press the User/Enter button.
The display will also show the words DEMO MODE and the current setting: OFF, LOGO, ROAD, or VISUAL EQ. The “demo mode” can be used while the treadmill is displayed in a store. While a demo mode is selected, the power cord can be plugged in, the key can be removed from the console, and the display will remain on. The console buttons will not function. To select a demo mode, highlight DEMO MODE and then press the User/Enter button. Next, press the in­crease or decrease button beside the User/Enter button to highlight OFF (to turn off the demo mode), LOGO (to display a logo), ROAD (to dis­play an animation of a runner on a road), or VI­SUAL EQ (to display a visual). Then, press the User/Enter button.
you through your workouts and instruct you how to purchase more iFIT Cards if “Instruction” is se-
ected as your audio setting. If you select the “On”
l setting, your personal trainer will simply guide you
hrough your iFIT workouts. If you select “Off,” you
t will hear no audio guidance during your workouts. To change the audio setting, first highlight AUDIO TRAINER and press the User/Enter button. Next, press the increase or decrease button beside the User/Enter button to select the desired audio set­ting. Then, press the User/Enter button.
You can adjust the volume of your personal trainer’s voice by highlighting VOLUME, pressing the User/Enter button, and then pressing the in­crease and decrease buttons beside the User/Enter button to select a volume setting. Then, press the Enter button.
The contrast of the display can also be adjusted. To adjust the contrast of the display, first highlight CONTRAST and press the User/Enter button. Next, press the increase and decrease buttons be­side the User/Enter button to select a contrast set­ting. Then, press the User/Enter button.
The console can also display a welcome message each time you insert the key into the console. Highlight WELCOME SCREEN and press the User/Enter button. Then, press the increase or de­crease button beside the User/Enter button to se­lect ON or OFF and press the User/Enter button.
When you are finished exercising, remove the
5
key from the console.
To exit the settings mode at any time, remove the key from the console.
You can select an audio setting if desired. When you use an iFIT Card, a personal trainer will guide
13
Page 14
OW TO USE THE MANUAL MODE
H
Insert the key into the console.
1
ee HOW TO TURN ON THE POWER on page
S
12.
Change the incline of the treadmill as desired.
5
To change the incline of the treadmill, press the Incline increase or decrease button, or one of the twelve 1 Step Incline buttons. Each time one of the buttons is pressed, the incline will gradually adjust until it reaches the selected incline setting.
Personalize console settings if desired.
2
See HOW TO PERSONALIZE CONSOLE SET­TINGS on page 12.
Select the manual mode.
3
Each time the key is inserted, the manual mode will be selected. If you have selected a program, press the Programs buttons repeatedly until the word MANUAL appears in the display.
Start the walking belt and adjust the speed.
4
To start the walking belt, press the Start button, the Speed + button, or one of the twelve 1 Step Speed buttons.
If the Start button or the Speed + button is pressed, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed + and – buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in in­crements of 0.5 mph. If one of the twelve 1 Step Speed buttons is pressed, the walking belt will gradually increase in speed until it reaches the se­lected speed setting.
To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button, the Speed + button, or one of the twelve 1 Step Speed buttons.
Select a display mode and monitor your
6
progress with the display and the training zone bar.
As you walk or run on the treadmill, the display can show the following workout information:
The elapsed time.
The distance that you have walked or run.
The speed of the walking belt.
The incline level of the treadmill.
The approximate number of calories you have burned.
The approximate number of grams of carbs you have burned.
Your heart rate. Note: Your heart rate can be displayed only while you use the handgrip pulse sensor or the optional chest pulse sensor.
In addition, the display can show a “workout history”—a profile that represents the speed settings that you select during your workout. At the beginning of each minute of your workout, an additional column will appear in the profile; as you increase or decrease the speed setting, the height of the column will increase or de­crease.
The display can also show an animation of a runner on a road. As you increase or decrease the speed setting, the runner will speed up or slow down.
14
Page 15
When the manual mode is selected, the console offers eight display modes. The display mode that
ou select will determine which workout informa-
y tion is shown. For example, the first display mode
hows only the elapsed time and the distance that
s you have walked or run. Press the Display button repeatedly to select the desired display mode.
Note: Regardless of which display mode you se­lect, the speed or incline setting will appear in the display for a few seconds each time you change the setting. In addition, your heart rate will appear in the display for up to 40 seconds each time you use the handgrip pulse sensor or put on the op­tional chest pulse sensor. Note: If you select the display mode shown below, your heart rate will be shown in place of the approximate number of grams of carbs you have burned.
To use the handgrip
ulse sensor,
p first remove
he sheets of
t clear plastic from the metal contacts on the handgrip pulse sensor. Next,
stand on the foot rails and hold the metal contacts— pulse is detected, your heart rate will appear in the display.
reading, continue to hold the contacts for about 15 seconds.
Turn on the fan if desired.
avoid moving your hands. When your
For the most accurate heart rate
Contacts
8
To turn on the fan at low speed, press the Fan button. To turn on the fan at medium speed, press the button a second time. To turn on the fan at high speed, press the button a third time. To se­lect the auto fan mode, press the button a fourth time. When the auto fan mode is selected, the speed of the fan will automatically increase or de­crease as the speed of the walking belt increases or decreases.
As you exercise, the training zone bar will indicate the approximate intensity level of your exercise. For example, if eight of the indicators in the bar are lit, the bar shows that your intensity level is ideal for aerobic exercise.
Training Zone Bar
To reset the console, press the Stop button, re­move the key, and then reinsert the key.
Measure your heart rate if desired.
7
Note: If you use the handgrip pulse sensor and the optional chest pulse sensor at the same time, the display will not show your heart rate accu rately.
To turn off the fan, press the Fan button again. Note: If the fan is on when the walking belt stops, the fan will automatically turn off after a few min­utes.
When you are finished exercising, remove the
9
key from the console.
Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest set­ting.
The incline must be at the lowest setting when the treadmill is folded to the storage posi­tion or the treadmill will become damaged.
remove the key from the console and put it in a se cure place.
When you are finished using the treadmill, switch the position and unplug the power cord.
-
reset/off circuit breaker to the “off”
Next,
-
15
Page 16
OW TO USE A CARDIO PROGRAM
H
Insert the key into the console.
1
ee HOW TO TURN ON THE POWER on page
S
12.
Personalize console settings if desired.
2
See HOW TO PERSONALIZE CONSOLE SET­TINGS on page 12.
Select a Cardio program.
3
To select one of the ten Cardio program, press the Programs button repeatedly.
If the first or second display mode is selected, a profile of the speed settings of the program will ap-
ear in the display. A small arrow below the profile
p will indicate your progress.
At the end of the first one-minute segment of the program, a series of tones will sound. If a different speed setting and/or incline setting is pro­grammed for the second segment, the speed set­ting and/or incline setting will appear at the top of the display for a moment to alert you. The tread­mill will then automatically adjust to the speed and incline settings for the second segment.
The program will continue in this way until the small arrow reaches the right end of the profile. The walking belt will then slow to a stop.
When a Cardio program is selected, the display will show the name of the program, the program time, the maximum incline setting of the program, and the maximum speed setting of the program. In addition, a profile of the speed settings of the program will appear in the display.
Each preset program is divided into 30, 50, or 60 one-minute segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/or incline set­ting may be programmed for two or more consec­utive segments.
Press the Start button to start
the program.
4
A moment after the button is pressed, the tread­mill will automatically adjust to the first speed and incline settings of the program. Hold the handrails and begin walking.
Select a display mode and monitor your
5
progress with the display and the training zone bar.
If the third display mode is selected, the display
will show an animation of a runner.
At the end of the first one-minute segment of the program, a series of tones will sound. If a different speed setting is programmed for the second seg­ment, the speed setting will move along the bot­tom of the display to alert you. If a different incline setting is programmed, the incline setting will ap­pear at the top of the display for a moment. The treadmill will then automatically adjust to the speed and incline settings for the second seg­ment.
The program will continue in this way until the last segment ends. The walking belt will then slow to a stop.
When a Cardio program is selected, the console offers three display modes. Press the Display but­ton repeatedly to select the desired display mode.
16
Page 17
If the speed or incline setting for the current seg­ment is too high or too low, you can override the
etting by pressing the Speed or Incline buttons;
s however, when the next segment begins,
readmill will automatically adjust to the speed
t and incline settings for the next segment.
the
Turn on the fan if desired.
7
ee step 8 on page 15.
S
hen you are finished exercising, remove the
W
8
key from the console.
To stop the program at any time, press the Stop button. To restart the program, press the Start but­ton. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
Measure your heart rate if desired.
6
See step 7 on page 15.
When the program ends, make sure that the in-
cline of the treadmill is at the lowest setting.
Next, remove the key from the console and put it in a secure place.
When you are finished using the treadmill, switch the reset/off circuit breaker to the “off” position and unplug the power cord.
17
Page 18
OW TO USE A PULSE PROGRAM
H
CAUTION: If you have heart prob-
lems, or if you are over 60 years of age and have been inactive, do not use the Pulse pro­grams. If you are taking medication regularly,
onsult your physician to find whether the
c medication will affect your exercise heart rate.
same target heart rate setting may be pro­grammed for two or more consecutive segments.
Adjust the maximum target heart rate setting if
5
esired.
d
To adjust the maximum target heart rate setting,
ress the increase and decrease buttons beside
p the User/Enter button (see EXERCISE INTEN­SITY on page 28). To adjust the target heart rate setting quickly, hold down one of the buttons.
Follow the steps below to use a Pulse program.
Put on the optional chest pulse sensor.
1
Note: You must wear the optional chest pulse sen­sor to use a Pulse program.
Insert the key into the console.
2
See HOW TO TURN ON THE POWER on page
12.
Personalize console settings if desired.
3
See HOW TO PERSONALIZE CONSOLE SET­TINGS on page 12.
Select a Pulse program.
4
To select a Pulse program, press the Programs button repeatedly until the words PULSE PRO­GRAM 1 or PULSE PROGRAM 2 appear in the display.
Press the Start button to start the program.
6
A moment after the button is pressed, the walking belt will begin to move. Hold the handrails and begin walking.
Select a display mode and monitor your
7
progress with the display and the training zone bar.
When a Pulse program is selected, the console of­fers two display modes. Press the Display button to select the desired display mode.
Regardless of which display mode you select, a profile of the target heart rate settings of the pro­gram will appear in the display. A white line repre­senting your heartbeat will also appear; each time a heartbeat is detected, an additional peak will ap­pear in the line. A small arrow below the profile will indicate your progress.
When a Pulse program is selected, the display will show the name of the program and the maximum target heart rate setting of the program. In addi­tion, a profile of the target heart rate settings of the program will appear in the display.
Pulse program 1 is divided into one-minute seg-
. The same target heart rate setting is pro-
ments grammed for all segments (except for the first two segments). Pulse program 2 is divided into 30 one-minute segments. One target heart rate set­ting is programmed for each segment. Note: The
During each one-minute segment of the program, the console will compare your heart rate to the current target heart rate setting. If your heart rate is too far below or above the target heart rate set­ting, the speed of the walking belt or the incline of the treadmill will automatically change to bring your heart rate closer to the target heart rate set­ting. Each time the speed or incline changes, the speed setting and the incline setting will appear at the top of the display for a moment to alert you.
When each segment ends, a series of tones will sound.
18
Page 19
If the speed or incline setting for the current seg­ment is too high or too low, you can override the
etting by pressing the Speed or Incline buttons;
s however, when the console compares your heart
ate to the current target heart rate setting, the
r speed or incline of the treadmill may automatically change.
To stop the program at any time, press the Stop button. To restart the program, press the Start but­ton. The walking belt will begin to move at 1 mph. When the console compares your heart rate to the current target heart rate setting, the speed or in­cline of the treadmill may automatically change.
If Pulse program 1 is selected, the program will continue until you stop it by pressing the Stop but-
ton. If Pulse program 2 is selected, the program will continue until the small arrow reaches the
ight end of the profile. The walking belt will then
r slow to a stop.
Turn on the fan if desired.
8
See step 8 on page 15.
When you are finished exercising, remove the
9
key from the console.
See step 8 on page 17.
19
Page 20
OW TO CREATE A RECORD PROGRAM
H
Insert the key into the console.
1
ee HOW TO TURN ON THE POWER on page
S
12.
Personalize console settings if desired.
2
See HOW TO PERSONALIZE CONSOLE SET­TINGS on page 12.
Press the Start button to start the program.
4
moment after the button is pressed, the walking
A belt will begin to move. Hold the handrails and
egin walking.
b
Select a display mode and program the
5
esired speed and incline settings.
d
When a Record program is selected, the console offers three display modes. Press the Display but­ton repeatedly to select the desired display mode.
Select a Record program.
3
To select a Record program, press the Programs button repeatedly until the words RECORD PROGRAM 1 or RECORD PROGRAM 2 appear in the display.
If the Record program has not yet been de­fined, the display will show a program time of three minutes. If the program time is more than three minutes, see HOW TO USE A RECORD PROGRAM on page 21.
Each Record program is divided into one-minute segments. One speed setting and one incline set­ting can be programmed for each segment.
To program a speed setting and an incline setting for the first one-minute segment of the program, simply adjust the speed and incline of the treadmill as desired by pressing the Speed and Incline but­tons.
When the first segment ends, a series of tones will sound and the current speed setting and the cur­rent incline setting will be saved in memory.
Program a speed setting and an incline setting for the second segment as described above. Continue programming speed and incline settings for up to 30 segments.
When you are finished with your workout, press the Stop button twice. The Record program will then be saved in memory.
When you are finished exercising, remove the
6
key from the console.
See step 8 on page 17.
20
Page 21
OW TO USE A RECORD PROGRAM
H
Insert the key into the console.
1
ee HOW TO TURN ON THE POWER on page
S
12.
Select a display mode and monitor your
5
progress with the display and the training zone
ar.
b
he Record program will function in the same way
T as a Cardio program (see step 5 on pages 16 and
17).
Personalize console settings if desired.
2
See HOW TO PERSONALIZE CONSOLE SET­TINGS on page 12.
Select a Record program.
3
To select a Record program, press the Programs button repeatedly until the words RECORD PROGRAM 1 or RECORD PROGRAM 2 appear in the display.
When a Record program is selected, the display will show the name of the program, the maximum incline setting of the program, and the maximum speed setting. In addition, a profile of the speed settings of the program will appear in the display.
Note: If the display shows a program time of three minutes, see HOW TO CREATE A RECORD PROGRAM on page 20.
If desired, you can redefine the program while using it. for the current segment, simply press the Speed or Incline buttons. When the current segment ends, the new setting will be saved in memory. crease the length of the program, first wait until the program ends. Then, press the Start button and program speed and incline settings for as many ad­ditional segments as desired; Record programs can have up to 30 segments. When you have added as many segments as desired, press the Stop button twice. press the Stop button twice at any time before the program ends.
Measure your heart rate if desired.
To change the speed or incline setting
To in-
To decrease the length of the program,
6
See step 7 on page 15.
Turn on the fan if desired.
7
See step 8 on page 15.
When you are finished exercising, remove the
8
key from the console.
See step 8 on page 17.
Each Record program is divided into one-minute segments. One speed setting and one incline set­ting are programmed for each segment.
Press the Start button to start the program.
4
A moment after the button is pressed, the tread­mill will automatically adjust to the first speed and incline settings that you programmed previously. Hold the handrails and begin walking.
21
Page 22
OW TO USE AN IFIT CARD
H
Insert the key into the console.
1
ee HOW TO TURN ON THE POWER on page
S
12.
Personalize console settings if desired.
2
See HOW TO PERSONALIZE CONSOLE SET­TINGS on page 12.
Insert an iFIT Card and select a program.
3
To use an iFIT program, insert an iFIT Card into the iFIT slot; make sure that the iFIT Card is ori­ented so the metal contacts are face-down and are inserted into the iFIT slot.
iFIT Slot
Press the Start button to start the program.
4
moment after the button is pressed, the tread-
A mill will automatically adjust to the first speed and
ncline settings of the program. Hold the handrails
i and begin walking.
Select a display mode and monitor your
5
progress with the display and the training zone bar.
When an iFIT program is selected, the console of­fers three display modes (see step 6 on pages 14 and 15). Press the Display button repeatedly to se­lect the desired display mode. ond display mode is selected, a profile of the speed settings of the program will appear in the dis­play. A small arrow below the profile will indicate your progress.
During the program, a personal trainer will guide you through the workout. You can adjust the vol­ume or select an audio setting for your personal trainer (see step 4 on page 13).
If the first or sec-
iFIT Card
Next, select an iFIT program by pressing the iFIT increase and decrease buttons (next to the lit iFIT indicator). When an iFIT program is selected, the display will show the name of the program, the maximum incline setting and the maximum speed setting of the program, and the program time. In addition, a profile of the speed settings of the pro­gram will appear in the display.
Each preset program is divided into several one­minute segments. One speed setting and one in­cline setting are programmed for each segment. Note: The same speed setting and/or incline set­ting may be programmed for two or more consec­utive segments.
If the speed or incline setting for the current seg­ment is too high or too low, you can override the setting by pressing the Speed or Incline buttons; however, when the next segment begins,
treadmill will automatically adjust to the speed and incline settings for the next segment.
To stop the program at any time, press the Stop button. To restart the program, press the Start but­ton. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
Turn on the fan if desired.
6
See step 8 on page 15.
When you are finished exercising, remove the
7
key from the console.
See step 8 on page 17.
CAUTION: Always remove iFIT Cards from the iFIT slot when you are not using them.
the
22
Page 23
OW TO USE THE STEREO SOUND SYSTEM
H
To play music or audio books through the console’s stereo speakers, you must connect your MP3 player or CD player to the console. Locate the stereo audio
able below the speakers on the console, and plug it
c into a jack on your MP3 player or CD player.
Make
sure that the audio cable is fully plugged in.
Next, press the Play button on your MP3 player or CD player. Then, adjust the volume of your MP3 player or CD player.
If you are using a portable CD player and the CD skips, set the CD player on the floor or another flat sur­face instead of on the console.
THE OPTIONAL CHEST PULSE SENSOR
n optional chest pulse sensor offers hands-free oper-
A ation as it monitors your heart rate during your work-
uts. To purchase the optional chest pulse sensor,
o
call the toll-free telephone number on the front cover of this manual.
23
Page 24
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per-
anently damaged. Remove the key and unplug the power
m cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
1. Hold the frame with your hands in the location shown by the arrow at the right.
bility of injury, bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than your back.
halfway to the vertical position.
Move your right hand to the position shown and hold the
2. treadmill firmly. Pull the latch knob to the left and hold it. Raise the frame until the plate passes the pin on the latch knob. Release the latch knob.
is resting against the pin as shown.
CAUTION: To decrease the possi-
Raise the frame about
Make sure that the plate
To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor­age position in temperatures above 85° Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor­age position as described above. Make sure that the plate
is securely held by the pin on the lock knob.
1. Hold the handrails and place one foot against a wheel.
2. Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.
3. Place one foot against a wheel, and carefully lower the treadmill until it is resting in the storage position.
Wheels
Knob
Plate
Base
24
Page 25
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the frame with your right hand as
shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the frame down until it is past the pin on the latch knob.
2. Hold the frame firmly with both hands, and lower it to the
floor. To decrease the possibility of injury, bend your
legs and keep your back straight.
K
nob
25
Page 26
TROUBLESHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 10). Use only a single-outlet surge suppres­sor that meets all of the specifications described on page 10. Important: The treadmill is not com­patible with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is inserted into the console.
c. Check the reset/off circuit breaker located on the
treadmill frame near the power cord. If the switch pro­trudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch to the reset position.
PROBLEM: The power turns off during use
SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait
for five minutes and then press the switch to the reset position.
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
c. Remove the key from the console. Reinsert the key into the console.
d. If the treadmill still will not run, please see the front cover of this manual.
PROBLEM: The displays of the console do not function properly
SOLUTION:
a. Remove the key from the console and unplug the
power cord. Carefully tip the treadmill down as
shown in drawing a. Remove the Screws (87) from the Motor Hood (33). Raise the Upright (20) and care­fully remove the Motor Hood.
c
Tripped
a
87
Reset
20
87
Locate the Reed Switch (22) and the Magnet (18) on the left side of the Pulley (17). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw
(13), move the Reed Switch slightly, and then retighten the Screw. Reattach the Hood (33) with the Screws (87). Run the treadmill for a few minutes to check for a correct speed reading.
26
13
22
Top
View
33
1/8”
17
18
Page 27
PROBLEM: The walking belt slows when walked on
OLUTION: a
S
. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10.
. If the walking belt is overtightened, treadmill perfor-
b
mance may decrease and the walking belt may be­come damaged. Remove the key and
UNPLUG THE
POWER CORD. Using the hex key, turn both rear
roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
c. If the walking belt still slows when walked on, see the front cover of this manual.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION:
a. If the walking belt is off-center, remove the key and
UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walk­ing belt has shifted to the right, turn the left rear
roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.
b
3”–4”
Rear Roller Bolts
a
b. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and carefully walk on the tread­mill for a few minutes. Repeat until the walking belt is properly tightened.
PROBLEM: The incline of the treadmill does not change correctly
SOLUTION: a.
With the key in the console, press one of the Incline buttons.
move the key.
After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline sys­tem.
b
While the incline is changing,
re
-
27
Page 28
CONDITIONING GUIDELINES
WARNING: Before beginning this
or any exercise program, consult your physi-
ian. This is especially important for individu-
c als over the age of 35 or individuals with pre­existing health problems.
The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings. The sensor is intended only as an exercise aid in determining heart rate trends in general.
The following guidelines will help you to plan your ex­ercise program. For more detailed exercise informa­tion, obtain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. The chart below shows recom­mended heart rates for fat burning and aerobic exercise.
uses easily accessible ergy. Only after the first few minutes does your body
egin to use stored
b is to burn fat, adjust the speed and incline of the tread­mill until your heart rate is near the lowest number in your training zone.
For maximum fat burning, adjust the speed and incline of the treadmill until your heart rate is near the middle number in your training zone.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys­tem, your exercise must be “aerobic.” Aerobic exercise is activity that requires large amounts of oxygen for prolonged periods of time. This increases the demand on the heart to pump blood to the muscles, and on the lungs to oxygenate the blood. For aerobic exercise, adjust the speed and incline of the treadmill until your heart rate is near the highest number in your training zone.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A Warm-up—Start each workout with 5 to 10 minutes of stretching and light exercise. A proper warm-up in­creases your body temperature, heart rate and circula­tion in preparation for exercise.
carbohydrate calories
at calories
f
or energy. If your goal
f
for en-
To find the proper heart rate for you, first find your age near the bottom of the chart (ages are rounded off to the nearest ten years). Next, find the three numbers above your age. The three numbers define your “train ing zone.” The lower two numbers are recommended heart rates for fat burning; the higher number is the recommended heart rate for aerobic exercise.
To measure your heart rate during exercise, use the pulse sensor on the console.
Fat Burning
To burn fat effectively, you must exercise at a relatively low intensity level for a sustained period of time. During the first few minutes of exercise, your body
Training Zone Exercise—After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exercise program, do not keep your pulse in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise—never hold your breath.
A Cool-down—Finish each workout with 5 to 10 min­utes of stretching to cool down. This will increase the
­flexibility of your muscles and will help prevent post-ex-
ercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three workouts each week, with at least one day of rest be­tween workouts. After a few months, you may com­plete up to five workouts each week if desired. The key to success is to make exercise a regular and enjoyable part of your everyday life.
28
Page 29
SUGGESTED STRETCHES
he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.
T
. Toe Touch Stretch
1
Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot to­ward you and rest it against the inner thigh of your extended leg. Reach toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times for each leg. Stretches: Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your hands against a wall. Keep your back leg straight and your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times for each leg. To cause further stretching of the achilles ten­dons, bend your back leg as well. Stretches: Calves, achilles ten­dons and ankles.
4. Quadriceps Stretch
1
2
3
4
With one hand against a wall for balance, reach back and grasp one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip muscles.
5
29
Page 30
PART LIST—Model No. NTL18907.0 R1206A
To locate the parts listed below, see the EXPLODED DRAWING starting on page 32.
Key No. Qty. Description Key No. Qty. Description
1 2 Frame Thrust Washer 2 8 Endcap Bolt 3 1 Front Left Endcap 4 2 Frame Pivot Washer 5 8 Endcap Washer 6 1 Latch Warning Decal 7 27 Screw 8 1 Latch Plate
9 8 Endcap Nut 10 1 Front Right Endcap 11 2 Endcap Spring 12 2 Belt Guide 13 1 Reed Switch Screw 14 2 Frame Pivot Bolt 15 1 Walking Platform 16 1 Walking Belt 17 1 Front Roller 18 1 Magnet 19 2 Frame Spacer 20 1 Upright 21 1 Reed Switch Clip 22 1 Reed Switch 23 11 1/2” Screw 24 1 Wire Clamp 25 1 Drive Motor 26 5 Hood Mount 27 2 Bolt 28 1 Left Rear Endcap 29 1 Left Roller Guard 30 2 Hood Mount (Side) 31 2 Motor Bolt 32 7 Nut 33 1 Motor Hood 34 1 Latch Housing 35 1 Right Roller Guard 36 37 1 Support Bracket Screw 38 1 Front Roller Adjustment Bolt 39 1 40 1 Incline Motor 41 42 43 1 Controller 44 1 45 1 46 1 Power Cord Grommet 47 1 Power Cord 48 1 49 1 50 3 Tie Holder 51 1
1 Right Rear Endcap
Front Roller Nut
1 1
Incline Motor Bolt, Lower Transformer
Foot Pad (Left) Belly Pan
Off/Reset Circuit Breaker Support Bracket
Releasable Tie
52 10 Plastic Tie 53 4 Support Bracket Screw 54 1 Incline Stop Bracket 55 1 Incline Motor Bolt, Upper 56 1 Drive Roller Ground Wire 57 1 Idler Arm Spring 58 1 Idler Arm 59 2 Rear Wheel 60 2 Rear Roller Star Washer 61 2 Spring Washer 62 2 Rear Roller Bolt 63 1 Lift Frame 64 1 Rear Roller 65 1 Foot Pad (Right) 66 2 Handrail Endcap 67 4 Star Washer 68 1 Handrail 69 2 Latch Plate Screw 70 3 Cage Nut 71 1 Hex Key 72 4 Handrail Bolt 73 1 Upright Wire Harness 74 1 Base Plate Edging 75 1 Base Plate 76 1 Latch Assembly 77 3 Base Plate Bolt 78 1 Electronics Bracket 79 1 Idler Arm Bushing 80 1 Idler Arm Bolt 81 4 Base Pad 82 4 1” Tek Screw 83 1 Filter Wire 84 1 Idler Pulley Bolt 85 2 Belly Pan Screw 86 1 Drive Belt 87 88 4 Wheel Washer 89 2 Front Wheel 90 1 91 2 Idler Arm Washer 92 93 94 2 Wheel Spacer 95 1 96 2 97 1 Idler Pulley 98 1 Console Base
99 100 101 1 Belly Pan Grommet 102
13 Screw
Upright Ground Wire
1 1
2 1
1
Electronics Bracket Star Washer iFIT Card Kit
Access Door Wheel Bushing
Hood Clip Fan
Hole Plug
30
Page 31
Key No. Qty. Description Key No. Qty. Description
103 1 Key/Clip 104 2 Front Wheel Bolt
105 1 Console 106 1 Support Bracket 107 4 Fan Screw
#
1 4” Black Wire, M/F
# 1 6” Blue Wire, 2F # 1 4” Red Wire, M/F # 1 User's Manual
#These parts are not illustrated
pecifications are subject to change without notice.
S
ORDERING REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. When ordering parts, please be prepared to give the following information:
• the MODEL NUMBER OF THE PRODUCT (NTL18907.0)
• the NAME OF THE PRODUCT (NordicTrack APEX 6500 treadmill)
• the SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)
• the KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the PART LIST starting on page 30 and the EXPLODED DRAWING starting on page 32)
31
Page 32
23
56
14
12
12
10
8
69
3
44
16
65
15
2
2
5
9
5
9
1
71
6
64
27
36
59
35
2
5
9
62
60
51
87
50
52
49
53
53
18
17
24
7 87
32
11
29
59
28
2
27
32
5
9
62
60
11
61
61
EXPLODED DRAWING A—Model No. NTL18907.0 R1206A
32
Page 33
31
32
55
58
80
84
97
32
91
32
57
63
79
22
21
87
26
30
87
87
87
30
38
32
4
19
4
19
1
14
39
23
87
23
78
43
33
99
99
23
54
40
41
32
42
83
85
46
47
48
45
7
7
85
7
106
7
91
7
23
92
101
102
37
25
86
EXPLODED DRAWING B—Model No. NTL18907.0 R1206A
33
Page 34
77
77
70
77
75
74
70
70
81
82
89
32
104
88
94
96
81
82
32
89
104
88
94
96
81 82
20
76
34
7
72
67
67
72
73
81
82
73
23
90
EXPLODED DRAWING C—Model No. NTL18907.0 R1206A
34
Page 35
103
98
105
66
68
66
95
7
7
7
7
7
7
7
7
7
7
7
7
7
93
7
7
23
100
107
107
107
EXPLODED DRAWING D—Model No. NTL18907.0 R1206A
35
Page 36
LIMITED WARRANTY
WHAT IS COVERED—The entire NordicTrack®Apex 6500 treadmill (“Product”) is warranted to be free of all defects in
aterial and workmanship.
m
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the drive motor for life. Parts and labor are warranted for one year from the date of purchase.
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized
ervice provider, or, at our option, we will replace the Product.
s
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, im­proper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and maintain as set out in your User’s Manual (“Manual”). This warranty does not extend to products used for commercial or rental purposes.
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discov­ery of the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to do the periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-825-2588 and tell them your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if neces­sary, arrange for service where your Product is located or advise you how to ship the Product for service. Before ship­ping, always obtain a Return Authorization Number (RA No.) from our Customer Service Department; securely pack your Product (save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the product. Include a letter explaining the product or problem and a copy of your proof of purchase if you believe the ser­vice is covered by warranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above lim­itation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 249040 R1206A
Printed in USA
2006 ICON IP, Inc.
©
Loading...