CONFIDENTIAL 1 (1)
Nokia Mobile Phones Service Bulletin No. SB-011/02.02.00
Technical Support, Europe & Africa
NSM-3
VIBRA MOTOR MODIFICATION
In some cases the vibra motor function has become intermittent due to too
low spring force of vibra power line springs against PCB. An extra support
tape has taken in use in production, since IMEI number 448902/10/498295/1,
to lift the vibra motor higher towards PCB and therefore to increase the
spring force.
This support tape should be added to all NSM-3 phones returned to service,
until the modified rubber frame of vibra assembly is taken in use.
CODE PG DESCRIPTION
938B008 11 SUPPORT TAPE
Procedure
• Remove battery cover and battery
• Remove A-cover
• Remove six (6) screws of display module
• Lift up the display module
• Remove vibra motor assembly
• Install the support tape as shown in picture below
• Install vibra motor assembly
• Install display module (notice 17 Ncm tightening torque and tightening
order of screws)
• Install A-cover, battery and B-cover
• Check the function of the phone and vibra
NSM-3 SB-011
6XSSRUWWDSH