Nokia 88xx series and 8210
03.02.00
This Quick Guide is a generic guide for all Nokia 88xx series and 8210 phones. When you are asked to select the
modem you will see
Nokia 8810 Nokia 8810
Nokia 8850 Nokia 8850
Nokia 8210 Nokia 8210
Nokia ****
, please select one of the following:
Quick Guide to Using your Nokia Phone with Carbon Copy 5.0
SETTING UP YOUR NOKIA PHONE TO WORK WITH CARBON COPY 5.0 AS A FAXMODEM
If you haven't yet installed Carbon Copy 5.0 please do so before continuing and check also that you have the
Nokia Phone installed and that it works as a modem (I e in Dial-Up Networking).
1. Connect your Nokia Phone via infrared to your computer and start Carbon Copy 5.0
2. Now go to Options – Communications and select the appropriate modem as one of your connection types, so
that you are able to receive data calls from another computer using Carbon Copy (Figure 1).
Figure 1. Accessing the program's setup and selecting the appropriate modem.
3. Double-click on Create New Connection, click to select the connection type that you will be using and after that
click on Next (Figure 2).
Copyright ã 1995 - 2000. Nokia. All rights reserved.
1(4)
Figure 2. Creating a new connection.
4. Carbon Copy will now configure your Nokia phone to work as a faxmodem. Just fill in the required fields and
remember to select the correct modem (Figure 3).
Figure 3. The first three steps towards creating a new connection.
7. The final two steps to completing your new connection are as follows: in the first dialog box you are asked to
select the utilities to start when a connection to a remote computer is established and in the last one just click
Finish (Figure 4).
Copyright ã 1995 - 2000. Nokia. All rights reserved. 2(4)