The table below gives a short overview of service tools that can be used for testing, error analysis and repair of product RM-17, refer to various set-ups.
Type
Designator
Programme Specific Tools
MJ-22Module Jig0770843
SF-17 POS flash adapter0770844
DA-16 Docking Station Adapter0770770
SA-25 RF coupler0770769
RJ-17 PWB Soldering Rework Jig0770840
ST-13 uPA Solder Paste Stencil0770848
RJ-46 Antenna Switch Rework Jig0780374
ST-15Antenna Switch Solder Paste Stencil0780412
Common Service Tools
RJ-21uPA Rework Jig0770849
SS-42 Camera removal tool (replaces SRT-10)0780449
■ JVB-1 docking station (product code: 0770298) with DA-16 docking station
adapter
The JVB-1 docking station has been designed for calibration and software update use. The DA16 docking station adapter makes signal connections to the phone. JVB-1 and DA-16 are used
as one unit.
JVB-1 main electrical functions include the following:
•adjustable VBATT calibration voltage, current measurement limit voltage
“VCHAR”, current measurement calibration “ICHAR”
•adjustable ADC calibration voltage via BTEMP and BSI signal
•BTEMP and BSI calibration resistor
•signals from FBUS to the phone via parallel jig
•control via FBUS or USB
•Flash OK/FAIL indication
In calibration mode JVB-1 is powered by external power supply 11-16V DC. In flashing power
for the phone can be taken from FPS-8 or external power supply 11-16V DC.
■ DA-16 docking station adapter (product code: 0770770)
Docking station adapter for assembled RM-17 phones. The docking station adapter supports
testing, flashing, energy management calibration. If used in conjunction with the RF-coupler
SA-25, also RF function testing is possible.
Features include:
•compatible for JBV-1
•easy phone attachment and detachment
•reliable phone locking
•switch for reliable detection of phone attachment
•replaceable test pins
•internal SIM holder with interface to phone SIM reader