Nokia 6236i User Manual [es]

User Guide Manual del Usuario

Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i User Guide

Nota: La traducción en español de este manual inicia en la Página 109.

LEGAL INFORMATION

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the products Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i are in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokiausa.com/phones/declaration_of_conformity/

PART NO. 9235986, ISSUE NO. 1

Copyright ©2005 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia 6235, Nokia 6235i, Nokia 6236, Nokia 6236i, Pop-Port™, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.

US Patent No. 5818437 and other pending patents. T9 text input software

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java™ is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICUL AR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMEN T. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Contents

For your safety....................................................................................................... 4

1. Phone at a glance ......................................................................................... 9

2. Set up your phone ...................................................................................... 13

3. Text entry ...................................................................................................... 20

4. Messages ....................................................................................................... 22

5. Call log........................................................................................................... 35

6. Contacts......................................................................................................... 38

7. Camera........................................................................................................... 45

8. Gallery ............................................................................................................ 48

9. Media.............................................................................................................. 49

10. Settings.......................................................................................................... 52

11. Organizer....................................................................................................... 69

12. Mobile Web .................................................................................................. 77

13. Extras.............................................................................................................. 79

14. PC Connectivity ........................................................................................... 80

15. Enhancements.............................................................................................. 83

16. Reference information............................................................................... 84

Care and maintenance ...................................................................................... 86

Additional safety information......................................................................... 87

Nokia one-year limited warranty................................................................... 93

Appendix A.............................................................................................................97

Appendix B.......................................................................................................... 100

Index..................................................................................................................... 106

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Don't use the device at a refueling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the device where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

For your safety

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important information.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the main screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

■ About your device

The wireless devices described in this guide are approved for use on the CDMA 800, 1900 and AMPS networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and the legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.

■ Network Services

To use the device you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize them. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.

For your safety

■ Shared memory

The following device features may share memory: contacts; text messages; photos, images, and tones in Gallery; calendar notes; games; and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. If your phone displays a message that the memory is full when you try to use a shared memory feature, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as photos, images, and tones in Gallery; text messages; and applications may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome

Congratulations on your purchase of the Nokia 6235, Nokia 6235i, Nokia 6236, or Nokia 6236i mobile phone. Your device provides many functions that are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, camera, FM radio, and more. Your device can also connect to a PC, laptop, or other device using a data cable or infrared. To personalize your device you can set your favorite ringing tones.

■ Register your device

Make sure to register your device at www.nokiausa.com/support/warranty/ or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call a customer center or to have your device repaired.

■ Getting help

If you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the Electronic serial number (ESN) and your zip code (only in the US) and have it available.

Find your device label

The ESN is found on the type label (1), which is located beneath the battery on the back of the device. See "Remove the back cover," p. 14.

Welcome

Contact Nokia

Please have your product with you when contacting any of these numbers:

Nokia Customer Care Center, USA

Nokia Inc. Tel: 1-888-NOKIA-2U (1-888-665-4228) Fax: 1-813-249-9619 TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)

Customer Care Center, Canada

Nokia Products Ltd. 601 Westney Road South Ajax, Ontario L1S 4N7 Tel: 1-888-22-NOKIA (1-888-226-6542) Fax: 1-905-619-4360

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version and an interactive tutorial for this product may be available at the Web site

www.nokiausa.com

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the Web site at

www.nokiaaccessibility.com

Phone at a glance

1. Phone at a glance

• Power key (1)

• Earpiece (2)

• Headset connector (3)

• Five-way joystick (4)

• Right selection key (5)

• End key (6)

• Pop-Port™ connector (7)

• Microphone (8)

• Charger port (9)

• Keypad (10)

• Call key (11)

• Left selection key (12)

• Display screen (13)

• Volume key (14)

• IR port (15)

■ The start screen

Depending on your wireless service provider and the model number of your device, some or all of the following selection keys may appear on the start screen.

The start screen is home base and indicates your device is in standby mode.

Battery level (1)—A higher bar indicates more battery power.

Menu (2)—Press the joystick to select this option. Names or network operator menu item (3)—Press the Right selection key to select

this option.

Go to (4)—Press the Left selection key to select this option.

Signal strength (5)—A higher bar indicates a stronger network signal.

Phone at a glance

■ Quick keys

Depending on your wireless service provider and the model number of your device, some or all of the following joystick shortcuts may be available from the start screen.

Scroll up—Activate camera from standby mode. Scroll right—View calendar. Scroll down—Go to contacts list. Scroll left—Create a text message. Press joystick—Select highlighted menus and submenus.

■ Indicators and icons

Depending on your wireless service provider and the model number of your device, some or all of the following indicators and icons may appear on the start screen.

You have new text or picture messages. See "Text messages," p. 22. You have new multimedia messages. See "Multi media mes sages," p. 27.

You have a picture message in your inbox. See "Receive and save a

picture message," p. 26. You have new voice messages. See "Voice messages," p. 31. Device keypad is locked. See "Keyguard," p. 19. Device is set to the silent profile. See "Profiles," p. 52. Alarm clock is set to on. See "Alarm clock," p. 69. Countdown timer is running. See "Countdown timer," p. 75. Stopwatch timer is running in the background. See "Stopwatch," p. 75. Integrated hands-free is active. See "Use the loudspeaker," p. 17. Timed profile is selected. See "Profiles," p. 52.

, An enhancement is connected to the device.

or See "Enhancements," p. 83.

Voice privacy encryption is active in the network.

or Location info sharing is set to Emergency or ON.

See "Location info sharing," p. 55. You are in a digital network. See "Network Services," p. 5. You are in an analog network. See "Network Services," p. 5. You are in a 1XRTT network. See "Network Services," p. 5. You are roaming outside your home network.

See "Roaming options," p. 64.

Phone at a glance

■ Get the most out of this guide

The following sections illustrate the various components of your phone. Familiarize yourself with these sections to help you understand the instructions that follow.

This guide uses certain terms for the steps that you are asked to perform.

• Press means to press and release a key quickly. For example, press 7 means

press the key on the keypad that is labeled with the number 7 and letters "pqrs."

• Press and hold means to press and hold key for 2 to 3 seconds; then realease the key.

• Selection keys and the joystick are used to select a menu option. To select an option, press the selection key below the menu item on the device screen.

• The joystick is used to move up, down, left, or right in the menus.

• Call and end keys: Press the call key to place a call or to answer an incoming call. Press the end key to end a call or press and hold to return to the start screen.

■ Device menus

Device features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your device features. You can access these menus and submenus by using the scroll method or by using shortcuts.

You can change your menu view from list to grid. See "Display settings," p. 53.

Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.

Scroll method

You can use the joystick to move up, down, left and right through the options. Press the joystick to select an item.

1. At the start screen, select Menu, and scroll through the main menus using the joystick.

As you scroll through the menus, the menu number appears in the upper right corner of the display. On the right side of the display screen is a scroll bar with a tab that moves up or down as you scroll through the menus. This tab provides a visual representation of your current position in the menu structure.

2. When you arrive at a menu, press the joystick, Select, to enter submenus. Select Back (the Right selection key) to return to the previous menu. Press the end key to return to the start screen from any menu or submenu.

Phone at a glance

■ Go to function

The Go to menu allows you to change what you can access from the Left selection key on your device. With this function, your most frequently used functions can be quickly accessed from the Go to menu on the start screen.

Choose Go to functions

1. Go to can be accessed by pressing the Left selection key; or, at the start screen, select Go to > Options > Select options.

2. Use the joystick to highlight the desired function.

3. Select Mark to add a function. Select Unmark to remove a function.

4. Select Done when you have added all desired functions.

5. Select Yes to save the changes.

6. At the start screen, select Go to to display a list of the functions that you selected in step 3.

Organize functions

1. At the start screen, select Go to > Options > Organize.

2. Use the joystick to scroll up or down and highlight the function you wish to rearrange, and select Move > Move up, Move down, Move to top, or

Move to bottom.

3. Select Done > Yes to save the changes.

In-phone help

Many features have brief descriptions (help text) that can be viewed on the display. To activate help text, at the start screen, select Menu > Settings > Phone settings >

Help text activation > On or Off.

To view these descriptions, scroll to a feature and wait for about 14 seconds. Use the joystick to view all the description or press Back to exit.

Set up your phone

2. Set up your phone

■ Antenna

In the Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i phones, the antenna is internal and located towards the top of the device. A GPS antenna is activated when you place an emergency call or when you select On from the Location info sharing menu. See "Location info sharing," p. 55.

Hold the device as you would any other telephone with the antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimizes the antenna performance and battery life.

■ Change battery

Note: Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.

Set up your phone

Remove the back cover

With the back of the device facing you, slide the back cover toward the bottom of the device and remove.

Remove the battery

After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

UIM (CDMA SIM) card slot

Your device has a UIM card slot built into the mechanics, located under the battery. The UIM is a carrier-specific feature and is not functional in this model. Do not place any objects in this slot.

Replace the battery

1. Insert the gold-colored contact end of the battery, into the battery slot.

2. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

1. Set the back cover on the device so that the cover tabs align with the slots in the device.

2. Slide the back cover towa rds the top of the device until the back cover is securely in place.

Important: Do not remove the front cover of this device. Attempts to remove the front cover may damage the device. If your device requires service, contact Customer Care. See "Contact Nokia," p. 8.

Set up your phone

Charge the battery

1. Plug the charger transformer into a standard ac outlet.

2. Insert the charger output plug into the round jack at the bottom end of the device.

After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

■ Turn your device on or off

To turn your device on or off, press and hold the Power key on top of the device for at least 3 seconds.

■ Connect the headset

You can connect a compatible headset, such as HS-5, to your device. See "Enhancements," p. 83.

1. Plug the headset connector into the Pop-Port™ connector at the bottom end of your device. The icon appears on the start screen.

2. Position the headset on your ear. With the headset connected, you can

make, answer, and end calls as usual.

• Use the keypad to enter numbers.

• Press the call key to place a call.

See "Phone at a glance," p. 9.

• Press the end key to end a call.

You can also plug a compatible headset, such as the HS-9 Universal Headset, into the 2.5 mm headset jack on your device to allow hands-free operation. See "Enhancements," p. 83.

Set up your phone

■ Change front cover

Remove the back cover and battery

For instructions to remove back cover and battery, see "Remove the back cover," p. 14.

Remove the front cover

Gently pull the bottom of the front cover away from the rest of the device, and remove the front cover.

Install the keymat and front cover

1. Remove the keymat from the old front cover.

2. Place the keymat into the new front cover.

3. Press the front cover and keymat against the phone, and snap the front cover into place.

Warning: Always replace the front cover before replacing the battery and the back cover. Replacing the back cover first may cause damage to your phone.

Replace the battery and back cover

For instructions to replace back cover and battery, see "Replace the battery," p. 14, and "Replace the back cover," p. 14.

■ Answer calls

Answer or silence an incoming call

• Press the call key or select Answer to answer the call.

• Press the end key to reject the call.

•Select Silence to mute the ringing tone then select Dismiss, or do nothing and the call is eventually diverted to voicemail.

If your device is set to Silent in the Settings > Profiles menu, select Dismiss, and the call is rejected and diverted to voicemail.

Set up your phone

Adjust the earpiece volume

Whether in or out of a call, you can scroll the volume key located on the left side of your device up or down to adjust the volume of the earpiece. When you adjust the volume, a bar chart indicates the volume level.

Answer a call with the keypad locked

To answer a call with the keypad locked, press the call key or select Answer. During the call, all features function normally. When you end or reject the call, the keypad automatically relocks. See "Keyguard," p. 19.

When the keypad lock is on, calls still may be possible to the official emergency number programmed into your device. Enter the emergency number and press the call key.

Use the loudspeaker

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

You can use your device as a loudspeaker:

• To activate the loudspeaker while in a call select Loudsp.

• To deactivate the loudspeaker during a call, select Normal. The loudspeaker is deactivated automatically when a call (or a call attempt) ends

or when certain enhancements are connected.

Options during a call

Many of the options that you can use during a call are network services. Check with your wireless service provider for more information.

1. Select Options during a call to display the following:

Loudspeaker/Normal—Activate or deactivate the loudspeaker while in a call. New call—Initiate a conference call. See "Conference calling," p. 18. Save—Add a number while in a call to your contact list. This option is available

only when entering numbers during a call.

Add to contact—Add a contact while in a call to contact list. This option is

available only when entering numbers during a call.

End all calls—Disconnect from all active calls. Touch tones—Enter the number(s), and select Tones to send the number(s)

as tones.

Contacts—View the contacts list. Menu—View the phone menu.

2. Scroll to an option, and Select to activate the option or enter its submenu.

Set up your phone

■ Make a call

To make a call, at the start screen, enter the number you want to call and press the call key.

Use the contacts list

To begin entering names in your contacts list:

1. Enter the number with area code at the start screen.

2. Select Save to save the number to your contacts list.

3. Enter a contact name and select OK.

To use the contacts list, from the start screen, select Names and scroll to the contact you want to use.

Use the keypad

1. Enter the phone number (including the area code), and press the call key. To delete a character to the left of the cursor, select Clear.

2. Press the end key to end the call or select End call to cancel the call attempt.

Use the last dialed number

1. At the start screen, press the call key to display the last 30 numbers dialed.

2. Select the number (or name) you wish to redial, and press the call key.

Conference calling

Conference calling is a network service that allows you to take part in a conference call with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call.

3. Enter the phone number of the second participant, or select Search to retrieve a number from the contacts list.

4. Select OK and the first participant is put on hold and a data query appears.

5. When the second participant picks up, press the call key to connect the calls.

6. To end the conference call, select Options > End all calls or press the end key.

Set up your phone

■ Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed accidentally. If the keypad is locked, it unlocks when you answer a call. After the call, the lock automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Enter the emergency number and press the call key.

Lock the keypad

Press the joystick; then press * within two seconds.

Unlock the keypad

Press the joystick or select Unlock; then press * within two seconds.

Text entry

3. Text entry

You can use two methods for entering text and numbers: Standard mode and Predictive text mode.

•Select Clear to backspace the cursor and delete a character.

•Select and hold Clear to backspace continuously and delete characters.

■ Standard mode

Standard mode is the only way to enter text into the contacts list and to rename caller groups.

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your device awaits the next entry.

• Press 0 to enter a space, thereby accepting a completed word.

• Press 1 to insert a period into your message.

• Press and hold * to display a complete list of special characters.

• Press and hold # to bring up the Editor settings ( Number mode, Dictionary on/

Dictionary off, Writing language).

Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry screen to bring up the Editor settings menu list of Number mode, Dictionary on/

Dictionary off, and Writing language . Select Number mode, and the device will

return to the message entry screen and switch the ABC icon in the upper left corner of the display to the 123 icon (or back).

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. You can navigate through the list of special characters by using the joystick. Once a character is highlighted, select Insert to insert the character into your message.

Text entry

■ Predictive text mode

Predictive text mode allows you to write messages quickly using your keypad and the built-in dictionary. Predictive mode is much faster than the standard mode method because you only press the corresponding key on your keypad once for each letter.

Activate or deactivate

1. At any text entry screen, select Options > Dictionary on/Dictionary off.

2. If you are turning predictive text on, select the language of your choice.

Text entry

The illustration below simulates your display each time a key is pressed. For example, to write Nokia with predictive text on and with the English dictionary selected, press each of the following keys once:

the 6 key the 6 key the 5 key the 4 key the 2 key

• Press 0 to enter a space, and begin writing the next word.

• If a displayed word is not correct, press * to see other matches. To return to

the previous word in the list of matches, select Prev.

•If ? appears after a word, select Spell to add the word to the dictionary.

• Press 1 to insert a period into your message.

• Press and hold * to display special characters. Press * again to cycle through

all available characters.

■ Change case and mode

Press # to switch between uppercase, lowercase, and sentence case text, and between Standard and Predictive text mode. Case and mode are indicated by the following icons that appear in the upper left of the display screen.

Uppercase text: standard mode is on. Lowercase text: standard mode is on.

Sentence case text: standard mode is on. This option is available

only at the beginning of a sentence. Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available

only at the beginning of a sentence.

Messages

4. Messages

If you have subscribed to a message network service, you can send and receive messages to compatible phones that also subscribe to a message service. If supported by your service provider, you can also send and receive multimedia messages, and e-mail. See "Text entry," p. 21.

When composing text messages, picture messages, or multimedia messages, the number of characters allowed appears in the top right corner of the message. The use of special (Unicode) characters takes up more space. If there are special characters in your message, the indicator may not show the message length correctly. Before the message is sent, the device tells you if the message exceeds the maximum length allowed for one message.

Important: Exercise caution opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC.

Note: When sending messages, your device may display Message sent. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.

■ Text messages

Write and send

1. At the start screen, select Menu > Messages > Text messages > Create message. To go quickly to the Create message display, scroll left from the start screen.

2. Compose and send a message using the keypad. Some or all of the following

Options are available while composing your message: Preview—Preview the message when sending a picture message. Sending options—Mark or Unmark the sending options of a single message as

Urgent, Delivery note, Callback no., or Signature. See "Change sending

options," p. 25.

Clear text —Erase all text from the message editor. Insert picture—Insert a picture from Templates folder into your message. Change picture—Change the picture in a picture message. Delete picture—Delete the picture in a picture message.

Messages

Insert contact—Insert a name from your contacts list into your message. Insert number—Insert a phone number or find a phone number in the

contacts list.

Save message—Select Drafts to save the message in the Drafts folder; select Templates to save the message as one of your predefined templates in the

Templates folder.

Exit editor—Exit the message editor. Use template—Insert a predefined template into your message.

See "Templates," p. 24.

Insert smiley—Insert a smiley into your message. Insert word—Enter a word and insert it into your message. This option is

available if predictive text is turned on.

Insert symbol—Insert a special character into your message. This option is

available if predictive text is turned on.

Writing language—Choose the language you want to use. Dictionary on or Dictionary off—Turn the predictive text on or off. Matches—View matches in the dictionary for the word you want to use.

3. To send the message, select Send > Send to number, Send to e-mail, Send to

many, or Send to distrib. list (if a distribution list has been created). Enter the

recipient’s phone number or select Search to retrieve a number from Contacts, and select OK.

4. To resend, edit or view recipients for the message, select Resend > Send,

Edit message or View recipients.

Distribution list

The distribution list allows you to send messages to a group of contacts. At the start screen, select Menu > Messages > Distribution lists.

To create a distribution list select New list if lists have not been created or

Options > Create new list > name your list > OK to create additional lists. To

populate your list, select Add new and select a contact from your contacts list. To use, rename, or modify a distribution list highlight the distribution list and

select Options > Create new list, Send text msg., Send multimedia, Rename list,

Clear list, or Delete list.

Messages

Templates

Templates are short, prewritten messages that can be recalled and inserted into new text messages.

1. At the start screen, select Menu > Messages > Text messages > Create

message > Options > Use template.

2. Select one of the available templates.

3. Select Send > Send to number, Send to e-mail, Send to many, or Send to

distrib. list (if a distribution list has been created) > Select.

A distribution list only contains phone numbers of recipients and is selected from a list of predefined groups you create.

4. Enter the recipient’s phone number or select Search and select a number from your contacts list. Select Send.

Read message

When you receive a message, a notification message displays.

1. Select Show to read the message or Exit to dismiss the notification and read the message later.

2. Scroll up or down to view the whole message, if necessary.

Options

When you read a text message, some or all of the following options are available:

Delete—Discard the message. Use number—Use or save the number. Select Options > Add to contact, Send

message, or Call. Use web link—Displays if a URL is included in the message. Save address—Lists the e-mail addresses included in the message. Select Save to

save the e-mail address as a new phone book entry or select Options > Add t o

contact or Send e-mail. The Save address option displays only if the message

contains an e-mail address.

Save picture—Saves a picture to the Templates folder, if you receive a picture in

the message. Must be supported by service provider.

Save—Save the message to Sent items, Archive, Templates, or a folder you

have created.

Forward—Forward the message to another phone number or e-mail address. Rename—Edit the title of the message.

Messages

Reply to message

1. Select Reply > Empty screen, Original text, Templa te, or one of the predefined answers, then compose your reply using the keypad.

2. Create the reply, and select Send. The sender’s phone number or e-mail is used as the default.

Change sending options

1. To change sending options for all future text messages, at the start screen, select

Menu > Messages > Text messages > Message settings > Sending options.

2. Select the setting you wish to change:

Priority—Set the priority of the note as Normal or Urgent. Delivery note—A note is sent to you confirming delivery of the message.

Select On or Off.

Send callback number—A callback number is sent to the recipient. Select Off

or your phone number.

Signature—Select On to create a signature to send with text messages, or

select Off to turn this feature off.

Change message settings

1. At the start screen, select Menu > Messages > Text messages > Message

settings > Other settings.

2. Select the setting you wish to change:

Message font size—Select Small font or Large font. Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or

Off. When the message memory is full, your device cannot send or receive any

new messages. However, you can set your device to automatically replace old messages in the Inbox and Outbox folders when new ones arrive.

Save sent messages—Select Always save, Always prompt, or Off. Queue msgs. when digital unavailable—Select On, On prompt, or Off.

Messages are stored in the Outbox until they can be sent with digital service.

■ Picture messages

Your device comes with five preloaded pictures. You can save more pictures. If necessary, you can overwrite any of the preloaded pictures. Pictures can be attached to a message and sent using a text message to compatible phones.

Messages

Picture messages behave the same as text messages, but pictures take up more memory than text message. You cannot send a picture message using e-mail.

Pictures are stored in the Images folder in Gallery. See "Gallery," p. 48.

Receive and save a picture message

Note: Only compatible devices that offer picture message features can receive and display picture messages.

When you receive a picture message, your device beeps, displays 1 me ssage received or the number of multimedia messages received, and displays the messaging icon

in the upper left corner of the start screen as a reminder. When you have

unopened picture messages in your inbox displays. Select Show to view the picture message. If you have more than one picture

message, scroll and select the message you want to view. Use the joystick to view the whole picture if necessary.

You can save a received picture to your Templates folder by selecting Options >

Save picture. Enter a title and select OK. If your Templates folder is full of pictures,

you can scroll to the picture you want to replace and choose Select.

Compose and send a picture message

When you insert a standard picture into a message, the number of characters that can be added changes. The number of characters is shown in the upper right corner of the display screen.

1. From the start screen, select Menu > Messages > Multimedia ms gs. >

Create message.

2. Write the message, and select Options > Insert > Image.

3. Open the folder that contains the picture you want to insert and select

Options > Insert.

To view another picture, select Back or Options > Insert, scroll to another picture, and select Options > Insert.

4. Select Search to retrieve a phone number from your contacts list, Send to enter the phone number, or Options > Send to e-mail, Send to many, or Send

to distrib. list (if a distribution list has been created) > Select.

To view or change the picture, select or Options > Preview or Dele te picture.

Messages

■ Multimedia messages

A multimedia message can contain text, sound, a picture, and a video clip. Your device supports multimedia messages that are up to 300 KB. If the maximum size is exceeded, the device may not be able to receive the message. Depending upon your network, you may receive a message that includes an Internet address where you can go to view the multimedia message. Pictures are scaled to fit the display area of the device. Your device has a multimedia message viewer for playing messages and a multimedia inbox where incoming messages reside untilthe user deletes or saves them. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone unless protected by copyright.

The appearance of a multimedia message may vary depending on the receiving device.

Important: Exercise caution opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded. This function can be used only if it is supported by your service provider or network operator. For availability and a subscription to the multimedia messaging service, contact your service provider or network operator.

Note: Only devices that offer compatible multimedia message features can receive and display multimedia messages. Multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, animated GIF, WBMP, BMP, and PNG

• Sound: SP-MIDI, AMR audio, QCELP, EVRC, and monophonic ringing tones

• Video: clips in H.264 (Profile 0, level 10) format with MPEG-4 (SVPO), 3GPP, 3GPP2, with AMR audio

If a received message contains unsupported elements, these elements may be replaced with the text Object format not supported.

You can receive a multimedia message notification but you cannot receive multimedia messages if you have a call in progress, games or other applications running, or an active browsing session. Because delivery of multimedia messages can fail for a variety of reasons, do not rely solely upon them for essential communications.

Messages

Multimedia message settings

Before you can use the multimedia message feature, you must specify whether you want to receive messages at all times or only if you are in the service prov ider’s home system. The default setting of the multimedia message service is generally on. This feature is a network service. check with your service provider for more information.

The default setting of the multimedia message service is generally on. On the receiving device, the default setting to receive a multimedia message is generally on.

When messages are available, you are notified 1 multimedia message available or the number of multimedia messages available displays. Select Reject to turn notification of multimedia messages on or off.

Allow or block multimedia reception

You can choose to receive all messages, to block all messages, or to receive mess ages only when you are in the service provider’s home network.

From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings > Allow multimedia reception and one of the following: Yes—Allow all incoming messages. When new messages arrive, Multimedia

message received or the number of multimedia messages received displays. In home network—Allow incoming messages only if you are in the service provider’s

home system. This is a network service. Check with your service provider for more information.

No—Block all incoming messages.

Allow or block advertisements

This setting is not available if multimedia reception is blocked. From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings > Allow advertisements > Yes or No.

Other multimedia messages settings

Other multimedia settings include saving your messages to the Sent items folder. From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings and one of the following: Save sent messages—Select Yes to save sent multimedia messages to the Sent

items folder or No to discard messages after they are sent.

Delivery reports—Select On to be informed if the message was delivered or Off to

not be informed.

Default slide timing—Set the default time in mm:ss format for each slide in an

MMS to remain on th e screen.

Messages

Folders

Your device has the following folders under Messages > Multimedia msgs..

Inbox—Contains received multimedia messages. Outbox—Contains multimedia messages that are waiting to be transmitted. Sent items—Contains sent multimedia messages. Saved item s—Contains saved multimedia messages that you can send later.

Write and send multimedia messages

1. From the start screen, select Menu > Messages > Multimedia msgs. >

Create message.

2. Enter your message text, and select Options > Insert > Image, Sound clip, New

sound clip, or Video clip. The list of available folders in the Gallery displays.

3. Open the desired folder, scroll to the image, sound clip, or video clip and select Options > Insert.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

4. To add a new page or slide to the message, select Options > Insert > Slide. This applies only if there is no video clip in the message.

Each slide can contain text, one image, and one sound clip. If the message contains several slides, you can open the desired slide by selecting Previous

slide, Next slide, or Slide list.

5. To set the time interval between the slides, select Options >Slide timing. Enter the time interval in mm:ss, and select OK.

6. To move the text to the top or bottom of the message, select Options > Place

text first or Place text last (default).

7. To insert a name from contacts, select Options > More options > Insert contact, scroll to the desired name, and choose Select.

8. To insert a number, select Options > More options > Insert number. Enter the number or search for it in contacts, and select OK.

9. To insert a calendar note that has been created, select Options > Insert >

Calendar note.

10. To insert a business card, select Options > Insert > Business card.

11. To delete an image, slide, video clip, or sound clip from the message, select

Options >

12. To add a subject to the message, select Options > More options > Edit subject, enter a subject, and select OK.

Delete > Image, Sound clip, Video clip, or Slide.

+ 203 hidden pages