Nokia 6236, 6235i, 6236i User Manual

User Guide Manual del Usuario

Nokia 6235, Nokia 6235i, Nokia 6236,
and Nokia 6236i User Guide

Nota: La traducción en español de este manual inicia en la Página 109.

1

LEGAL INFORMATION

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the products Nokia 6235,
Nokia 6235i, Nokia 6236, and Nokia 6236i are in conformity with the provisions of the
following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be
found at http://www.nokiausa.com/phones/declaration_of_conformity/

.

PART NO. 9235986, ISSUE NO. 1

Copyright ©2005 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia 6235, Nokia 6235i, Nokia 6236, Nokia 6236i,
Pop-Port™, and the Nokia Original Enhancements logos are trademarks or registered
trademarks of Nokia Corporation. Other company and product names mentioned herein
may be trademarks or trade names of their respective owners.

US Patent No. 5818437 and other pending patents. T9 text input software

Copyright ©1999-2005. Tegic Communications, Inc. All rights reserved.

Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.

Java™ is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 6235, Nokia 6235i,
Nokia 6236, and Nokia 6236i products. Nokia operates a policy of ongoing development.
Nokia reserves the right to make changes to any of the products described in this document
without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT
AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND
RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS
DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful interference.

2

Contents

Contents

For your safety....................................................................................................... 4

1. Phone at a glance......................................................................................... 9

2. Set up your phone ...................................................................................... 13

3. Text entry ...................................................................................................... 20

4. Messages ....................................................................................................... 22

5. Call log ........................................................................................................... 35

6. Contacts......................................................................................................... 38

7. Camera........................................................................................................... 45

8. Gallery ............................................................................................................ 48

9. Media.............................................................................................................. 49

10. Settings.......................................................................................................... 52

11. Organizer....................................................................................................... 69

12. Mobile Web .................................................................................................. 77

13. Extras.............................................................................................................. 79

14. PC Connectivity ........................................................................................... 80

15. Enhancements.............................................................................................. 83

16. Reference information............................................................................... 84

Care and maintenance ...................................................................................... 86

Additional safety information......................................................................... 87

Nokia one-year limited warranty................................................................... 93

Appendix A.............................................................................................................97

Appendix B.......................................................................................................... 100

Index..................................................................................................................... 106

3

For your safety

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or
when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.

INTERFERENCE

Do not switch the device on when wireless phone use is prohibited or
when it may cause interference or danger.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference
in aircraft.

SWITCH OFF WHEN REFUELING

Don't use the device at a refueling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the device where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product
documentation. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect
incompatible products.

4

For your safety

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all
important information.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the device is switched on and in service. Press the end key as
many times as needed to clear the display and return to the main screen.
Enter the emergency number, then press the call key. Give your
location. Do not end the call until given permission to do so.

■ About your device

The wireless devices described in this guide are approved for use on the CDMA 800,
1900 and AMPS networks. Contact your service provider for more information
about networks.

When using the features in this device, obey all laws and respect privacy and the
legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when wireless
phone use may cause interference or danger.

■ Network Services

To use the device you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to function.
These Network Services may not be available on all networks or you may have to
make specific arrangements with your service provider before you can utilize them.
Your service provider may need to give you additional instructions for their use
and explain what charges will apply. Some networks may have limitations that
affect how you can use Network Services. For instance, some networks may not
support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Contact
your service provider for more information.

5

For your safety

■ Shared memory

The following device features may share memory: contacts; text messages; photos,
images, and tones in Gallery; calendar notes; games; and applications. Use of one
or more of these features may reduce the memory available for the remaining
features sharing memory. If your phone displays a message that the memory is
full when you try to use a shared memory feature, delete some of the information
or entries stored in the shared memory features before continuing. Some of the
features, such as photos, images, and tones in Gallery; text messages; and
applications may have a certain amount of memory specially allotted to them in
addition to the memory shared with other features.

6

Welcome

Welcome

Congratulations on your purchase of the Nokia 6235, Nokia 6235i, Nokia 6236,
or Nokia 6236i mobile phone. Your device provides many functions that are
practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator,
calendar, camera, FM radio, and more. Your device can also connect to a PC,
laptop, or other device using a data cable or infrared. To personalize your device
you can set your favorite ringing tones.

■ Register your device

Make sure to register your device at www.nokiausa.com/support/warranty/ or
call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better
if you should need to call a customer center or to have your device repaired.

■ Getting help

If you need help, Nokia Customer Care is available for assistance. Before calling,
we recommend that you write down the Electronic serial number (ESN) and your
zip code (only in the US) and have it available.

Find your device label

The ESN is found on the type label (1),
which is located beneath the battery
on the back of the device.
See "Remove the back cover," p. 14.

7

Welcome

Contact Nokia

Please have your product with you when contacting any of these numbers:

Nokia Customer Care Center, USA

Nokia Inc.
Tel: 1-888-NOKIA-2U (1-888-665-4228)
Fax: [phone]
TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)

Customer Care Center, Canada

Nokia Products Ltd.
601 Westney Road South
Ajax, Ontario L1S 4N7
Tel: 1-888-22-NOKIA (1-888-226-6542)
Fax: [phone]

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version
and an interactive tutorial for this product may be available at the Web site

www.nokiausa.com

.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information visit the Web site at

www.nokiaaccessibility.com

.

8

1. Phone at a glance

• Power key (1)

• Earpiece (2)

• Headset connector (3)

• Five-way joystick (4)

• Right selection key (5)

• End key (6)

• Pop-Port™ connector (7)

• Microphone (8)

• Charger port (9)

• Keypad (10)

Phone at a glance

• Call key (11)

• Left selection key (12)

• Display screen (13)

• Volume key (14)

• IR port (15)

■ The start screen

Depending on your wireless service provider
and the model number of your device, some
or all of the following selection keys may
appear on the start screen.

The start screen is home base and indicates
your device is in standby mode.

Battery level (1)—A higher bar indicates
more battery power.

Menu (2)—Press the joystick to select this option.
Names or network operator menu item (3)—Press the Right selection key to select

this option.

Go to (4)—Press the Left selection key to select this option.

Signal strength (5)—A higher bar indicates a stronger network signal.

9

Phone at a glance

■ Quick keys

Depending on your wireless service provider and the model number of your device,
some or all of the following joystick shortcuts may be available from the start screen.

Scroll up—Activate camera from standby mode.
Scroll right—View calendar.
Scroll down—Go to contacts list.
Scroll left—Create a text message.
Press joystick—Select highlighted menus and submenus.

■ Indicators and icons

Depending on your wireless service provider and the model number of your device,
some or all of the following indicators and icons may appear on the start screen.

You have new text or picture messages. See "Text messages," p. 22.
You have new multimedia messages. See "Multimedia messages," p. 27.

You have a picture message in your inbox. See "Receive and save a

picture message," p. 26.
You have new voice messages. See "Voice messages," p. 31.
Device keypad is locked. See "Keyguard," p. 19.
Device is set to the silent profile. See "Profiles," p. 52.
Alarm clock is set to on. See "Alarm clock," p. 69.
Countdown timer is running. See "Countdown timer," p. 75.
Stopwatch timer is running in the background. See "Stopwatch," p. 75.
Integrated hands-free is active. See "Use the loudspeaker," p. 17.
Timed profile is selected. See "Profiles," p. 52.

, An enhancement is connected to the device.

or See "Enhancements," p. 83.

Voice privacy encryption is active in the network.

or Location info sharing is set to Emergency or ON.

See "Location info sharing," p. 55.
You are in a digital network. See "Network Services," p. 5.
You are in an analog network. See "Network Services," p. 5.
You are in a 1XRTT network. See "Network Services," p. 5.
You are roaming outside your home network.

See "Roaming options," p. 64.

10

Phone at a glance

■ Get the most out of this guide

The following sections illustrate the various components of your phone. Familiarize
yourself with these sections to help you understand the instructions that follow.

This guide uses certain terms for the steps that you are asked to perform.

• Press means to press and release a key quickly. For example, press 7 means

press the key on the keypad that is labeled with the number 7 and letters "pqrs."

• Press and hold means to press and hold key for 2 to 3 seconds; then realease
the key.

• Selection keys and the joystick are used to select a menu option. To select an
option, press the selection key below the menu item on the device screen.

• The joystick is used to move up, down, left, or right in the menus.

• Call and end keys: Press the call key to place a call or to answer an incoming call.
Press the end key to end a call or press and hold to return to the start screen.

■ Device menus

Device features are grouped according to function and are accessed through the
main menus. Each main menu contains submenus and lists from which you can
select or view items and customize your device features. You can access these
menus and submenus by using the scroll method or by using shortcuts.

You can change your menu view from list to grid. See "Display settings," p. 53.

Note: Some features may not be available, depending on your network.
For more information, contact your wireless provider.

Scroll method

You can use the joystick to move up, down, left and right through the options.
Press the joystick to select an item.

1. At the start screen, select Menu, and scroll through the
main menus using the joystick.

As you scroll through the menus, the menu number
appears in the upper right corner of the display. On the
right side of the display screen is a scroll bar with a tab
that moves up or down as you scroll through the menus. This tab provides a
visual representation of your current position in the menu structure.

2. When you arrive at a menu, press the joystick, Select, to enter submenus.
Select Back (the Right selection key) to return to the previous menu. Press the
end key to return to the start screen from any menu or submenu.

11

Phone at a glance

■ Go to function

The Go to menu allows you to change what you can access from the Left selection
key on your device. With this function, your most frequently used functions can
be quickly accessed from the Go to menu on the start screen.

Choose Go to functions

1. Go to can be accessed by pressing the Left selection key; or, at the start screen,
select Go to > Options > Select options.

2. Use the joystick to highlight the desired function.

3. Select Mark to add a function. Select Unmark to remove a function.

4. Select Done when you have added all desired functions.

5. Select Yes to save the changes.

6. At the start screen, select Go to to display a list of the functions that you
selected in step 3.

Organize functions

1. At the start screen, select Go to > Options > Organize.

2. Use the joystick to scroll up or down and highlight the function you wish
to rearrange, and select Move > Move up, Move down, Move to top, or

Move to bottom.

3. Select Done > Yes to save the changes.

In-phone help

Many features have brief descriptions (help text) that can be viewed on the display.
To activate help text, at the start screen, select Menu > Settings > Phone settings >

Help text activation > On or Off.

To view these descriptions, scroll to a feature and wait for about 14 seconds. Use
the joystick to view all the description or press Back to exit.

12

Set up your phone

2. Set up your phone

■ Antenna

In the Nokia 6235, Nokia 6235i, Nokia 6236, and
Nokia 6236i phones, the antenna is internal and
located towards the top of the device. A GPS antenna
is activated when you place an emergency call or
when you select On from the Location info sharing
menu. See "Location info sharing," p. 55.

Hold the device as you would any other telephone
with the antenna area pointed up and over your shoulder.

Note: As with any other radio
transmitting device, do not touch the
antenna unnecessarily when the device is
switched on. Contact with the antenna
affects call quality and may cause the
device to operate at a higher power level
than otherwise needed. Not touching the
antenna area during a phone call optimizes
the antenna performance and battery life.

■ Change battery

Note: Before removing the cover, always switch off the power and
disconnect the charger and any other device. Avoid touching electronic
components while changing the covers. Always store and use the device
with the covers attached.

13

Set up your phone

Remove the back cover

With the back of the device facing
you, slide the back cover toward the
bottom of the device and remove.

Remove the battery

After you have removed the back
cover, insert your finger into the
finger grip, and lift the battery from
its compartment.

UIM (CDMA SIM) card slot

Your device has a UIM card slot built into the mechanics, located under the
battery. The UIM is a carrier-specific feature and is not functional in this model.
Do not place any objects in this slot.

Replace the battery

1. Insert the gold-colored contact
end of the battery, into the
battery slot.

2. Push down on the other end of
the battery to snap the battery
into place.

Replace the back cover

1. Set the back cover on the device
so that the cover tabs align with
the slots in the device.

2. Slide the back cover towards the
top of the device until the back
cover is securely in place.

Important: Do not remove
the front cover of this device. Attempts to remove the front cover may
damage the device. If your device requires service, contact Customer
Care. See "Contact Nokia," p. 8.

14

Set up your phone

Charge the battery

1. Plug the charger transformer into a standard ac outlet.

2. Insert the charger output plug into
the round jack at the bottom end of
the device.

After a few seconds, the battery
indicator in the display starts to
scroll from bottom to top. If the
battery is completely discharged, it
may take a few minutes before the
charging indicator appears on the
display or before any calls can be made.

■ Turn your device on or off

To turn your device on or off, press and hold
the Power key on top of the device for at
least 3 seconds.

■ Connect the headset

You can connect a compatible headset, such as
HS-5, to your device. See "Enhancements," p. 83.

1. Plug the headset connector into the
Pop-Port™ connector at the bottom end
of your device. The icon appears on
the start screen.

2. Position the headset on your ear.
With the headset connected, you can

make, answer, and end calls as usual.

• Use the keypad to enter numbers.

• Press the call key to place a call.

See "Phone at a glance," p. 9.

• Press the end key to end a call.

You can also plug a compatible headset, such as the HS-9 Universal Headset,
into the 2.5 mm headset jack on your device to allow hands-free operation.
See "Enhancements," p. 83.

15

Set up your phone

■ Change front cover

Note: Before removing the cover, always switch off the power and
disconnect the charger and any other device. Avoid touching electronic
components while changing the covers. Always store and use the device
with the covers attached.

Remove the back cover and battery

For instructions to remove back cover and battery, see "Remove the back cover,"
p. 14.

Remove the front cover

Gently pull the bottom of the front cover away from the rest of the device, and
remove the front cover.

Install the keymat and front cover

1. Remove the keymat from the old front cover.

2. Place the keymat into the new front cover.

3. Press the front cover and keymat against the phone, and snap the front cover
into place.

Warning: Always replace the front cover before replacing the battery
and the back cover. Replacing the back cover first may cause damage to
your phone.

Replace the battery and back cover

For instructions to replace back cover and battery, see "Replace the battery," p. 14,
and "Replace the back cover," p. 14.

■ Answer calls

Answer or silence an incoming call

• Press the call key or select Answer to answer the call.

• Press the end key to reject the call.

•Select Silence to mute the ringing tone then select Dismiss, or do nothing and
the call is eventually diverted to voicemail.

If your device is set to Silent in the Settings > Profiles menu, select Dismiss,
and the call is rejected and diverted to voicemail.

16

Set up your phone

Adjust the earpiece volume

Whether in or out of a call, you can scroll the volume key located on the left side
of your device up or down to adjust the volume of the earpiece. When you adjust
the volume, a bar chart indicates the volume level.

Answer a call with the keypad locked

To answer a call with the keypad locked, press the call key or select Answer.
During the call, all features function normally. When you end or reject the call,
the keypad automatically relocks. See "Keyguard," p. 19.

When the keypad lock is on, calls still may be possible to the official emergency
number programmed into your device. Enter the emergency number and press
the call key.

Use the loudspeaker

Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.

You can use your device as a loudspeaker:

• To activate the loudspeaker while in a call select Loudsp.

• To deactivate the loudspeaker during a call, select Normal.
The loudspeaker is deactivated automatically when a call (or a call attempt) ends

or when certain enhancements are connected.

Options during a call

Many of the options that you can use during a call are network services. Check with
your wireless service provider for more information.

1. Select Options during a call to display the following:

Loudspeaker/Normal—Activate or deactivate the loudspeaker while in a call.
New call—Initiate a conference call. See "Conference calling," p. 18.
Save—Add a number while in a call to your contact list. This option is available

only when entering numbers during a call.

Add to contact—Add a contact while in a call to contact list. This option is

available only when entering numbers during a call.

End all calls—Disconnect from all active calls.
Touch tones—Enter the number(s), and select Tones to send the number(s)

as tones.

Contacts—View the contacts list.
Menu—View the phone menu.

2. Scroll to an option, and Select to activate the option or enter its submenu.

17

Set up your phone

■ Make a call

To make a call, at the start screen, enter the number you want to call and press
the call key.

Use the contacts list

To begin entering names in your contacts list:

1. Enter the number with area code at the start screen.

2. Select Save to save the number to your contacts list.

3. Enter a contact name and select OK.

To use the contacts list, from the start screen, select Names and scroll to the
contact you want to use.

Use the keypad

1. Enter the phone number (including the area code), and press the call key.
To delete a character to the left of the cursor, select Clear.

2. Press the end key to end the call or select End call to cancel the call attempt.

Use the last dialed number

1. At the start screen, press the call key to display the last 30 numbers dialed.

2. Select the number (or name) you wish to redial, and press the call key.

Conference calling

Conference calling is a network service that allows you to take part in a
conference call with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call.

3. Enter the phone number of the second participant, or select Search to
retrieve a number from the contacts list.

4. Select OK and the first participant is put on hold and a data query appears.

5. When the second participant picks up, press the call key to connect the calls.

6. To end the conference call, select Options > End all calls or press the end key.

18

Set up your phone

■ Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed
accidentally. If the keypad is locked, it unlocks when you answer a call. After the
call, the lock automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device. Enter the emergency number and press
the call key.

Lock the keypad

Press the joystick; then press * within two seconds.

Unlock the keypad

Press the joystick or select Unlock; then press * within two seconds.

19

Text entry

3. Text entry

You can use two methods for entering text and numbers: Standard mode and
Predictive text mode.

•Select Clear to backspace the cursor and delete a character.

•Select and hold Clear to backspace continuously and delete characters.

■ Standard mode

Standard mode is the only way to enter text into the contacts list and to rename
caller groups.

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second
letter, etc. If you pause briefly, the last letter in the display is accepted and
your device awaits the next entry.

• Press 0 to enter a space, thereby accepting a completed word.

• Press 1 to insert a period into your message.

• Press and hold * to display a complete list of special characters.

• Press and hold # to bring up the Editor settings (Number mode, Dictionary on/

Dictionary off, Writing language).

Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry
screen to bring up the Editor settings menu list of Number mode, Dictionary on/

Dictionary off, and Writing language. Select Number mode, and the device will

return to the message entry screen and switch the ABC icon in the upper left
corner of the display to the 123 icon (or back).

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and
hold * if predictive text is on). Press * again to cycle through all available
characters. You can navigate through the list of special characters by using the
joystick. Once a character is highlighted, select Insert to insert the character into
your message.

20

Text entry

■ Predictive text mode

Predictive text mode allows you to write messages quickly using your keypad and the
built-in dictionary. Predictive mode is much faster than the standard mode method
because you only press the corresponding key on your keypad once for each letter.

Activate or deactivate

1. At any text entry screen, select Options > Dictionary on/Dictionary off.

2. If you are turning predictive text on, select the language of your choice.

Text entry

The illustration below simulates your display each time a key is pressed. For example,
to write Nokia with predictive text on and with the English dictionary selected,
press each of the following keys once:

the 6 key the 6 key the 5 key the 4 key the 2 key

• Press 0 to enter a space, and begin writing the next word.

• If a displayed word is not correct, press * to see other matches. To return to

the previous word in the list of matches, select Prev.

•If ? appears after a word, select Spell to add the word to the dictionary.

• Press 1 to insert a period into your message.

• Press and hold * to display special characters. Press * again to cycle through

all available characters.

■ Change case and mode

Press # to switch between uppercase, lowercase, and sentence case text, and
between Standard and Predictive text mode. Case and mode are indicated by the
following icons that appear in the upper left of the display screen.

Uppercase text: standard mode is on.
Lowercase text: standard mode is on.

Sentence case text: standard mode is on. This option is available

only at the beginning of a sentence.
Uppercase text: predictive text is on.
Lowercase text: predictive text is on.
Sentence case text: predictive text is on. This option is available

only at the beginning of a sentence.

21

Messages

4. Messages

If you have subscribed to a message network service, you can send
and receive messages to compatible phones that also subscribe to a message service.
If supported by your service provider, you can also send and receive multimedia
messages, and e-mail. See "Text entry," p. 21.

When composing text messages, picture messages, or multimedia messages, the
number of characters allowed appears in the top right corner of the message.
The use of special (Unicode) characters takes up more space. If there are special
characters in your message, the indicator may not show the message length
correctly. Before the message is sent, the device tells you if the message exceeds
the maximum length allowed for one message.

Important: Exercise caution opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.

Note: When sending messages, your device may display Message sent.
This is an indication that the message has been sent by your device to the
message center number programmed into your device. This is not an
indication that the message has been received at the intended destination.
For more details about messaging services, check with your service provider.

■ Text messages

Write and send

1. At the start screen, select Menu > Messages > Text messages > Create message.
To go quickly to the Create message display, scroll left from the start screen.

2. Compose and send a message using the keypad. Some or all of the following

Options are available while composing your message:
Preview—Preview the message when sending a picture message.
Sending options—Mark or Unmark the sending options of a single message as

Urgent, Delivery note, Callback no., or Signature. See "Change sending

options," p. 25.

Clear text—Erase all text from the message editor.
Insert picture—Insert a picture from Templates folder into your message.
Change picture—Change the picture in a picture message.
Delete picture—Delete the picture in a picture message.

22

Messages

Insert contact—Insert a name from your contacts list into your message.
Insert number—Insert a phone number or find a phone number in the

contacts list.

Save message—Select Drafts to save the message in the Drafts folder; select
Templates to save the message as one of your predefined templates in the

Templates folder.

Exit editor—Exit the message editor.
Use template—Insert a predefined template into your message.

See "Templates," p. 24.

Insert smiley—Insert a smiley into your message.
Insert word—Enter a word and insert it into your message. This option is

available if predictive text is turned on.

Insert symbol—Insert a special character into your message. This option is

available if predictive text is turned on.

Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn the predictive text on or off.
Matches—View matches in the dictionary for the word you want to use.

3. To send the message, select Send > Send to number, Send to e-mail, Send to

many, or Send to distrib. list (if a distribution list has been created). Enter the

recipient’s phone number or select Search to retrieve a number from Contacts,
and select OK.

4. To resend, edit or view recipients for the message, select Resend > Send,

Edit message or View recipients.

Distribution list

The distribution list allows you to send messages to a group of contacts. At the
start screen, select Menu > Messages > Distribution lists.

To create a distribution list select New list if lists have not been created or

Options > Create new list > name your list > OK to create additional lists. To

populate your list, select Add new and select a contact from your contacts list.
To use, rename, or modify a distribution list highlight the distribution list and

select Options > Create new list, Send text msg., Send multimedia, Rename list,

Clear list, or Delete list.

23

Messages

Templates

Templates are short, prewritten messages that can be recalled and inserted into
new text messages.

1. At the start screen, select Menu > Messages > Text messages > Create

message > Options > Use template.

2. Select one of the available templates.

3. Select Send > Send to number, Send to e-mail, Send to many, or Send to

distrib. list (if a distribution list has been created) > Select.

A distribution list only contains phone numbers of recipients and is selected
from a list of predefined groups you create.

4. Enter the recipient’s phone number or select Search and select a number from
your contacts list. Select Send.

Read message

When you receive a message, a notification message displays.

1. Select Show to read the message or Exit to dismiss the notification and read
the message later.

2. Scroll up or down to view the whole message, if necessary.

Options

When you read a text message, some or all of the following options are available:

Delete—Discard the message.
Use number—Use or save the number. Select Options > Add to contact, Send

message, or Call.
Use web link—Displays if a URL is included in the message.
Save address—Lists the e-mail addresses included in the message. Select Save to

save the e-mail address as a new phone book entry or select Options > Add to

contact or Send e-mail. The Save address option displays only if the message

contains an e-mail address.

Save picture—Saves a picture to the Templates folder, if you receive a picture in

the message. Must be supported by service provider.

Save—Save the message to Sent items, Archive, Templates, or a folder you

have created.

Forward—Forward the message to another phone number or e-mail address.
Rename—Edit the title of the message.

24

Messages

Reply to message

1. Select Reply > Empty screen, Original text, Template, or one of the predefined
answers, then compose your reply using the keypad.

2. Create the reply, and select Send. The sender’s phone number or e-mail is
used as the default.

Change sending options

1. To change sending options for all future text messages, at the start screen, select

Menu > Messages > Text messages > Message settings > Sending options.

2. Select the setting you wish to change:

Priority—Set the priority of the note as Normal or Urgent.
Delivery note—A note is sent to you confirming delivery of the message.

Select On or Off.

Send callback number—A callback number is sent to the recipient. Select Off

or your phone number.

Signature—Select On to create a signature to send with text messages, or

select Off to turn this feature off.

Change message settings

1. At the start screen, select Menu > Messages > Text messages > Message

settings > Other settings.

2. Select the setting you wish to change:

Message font size—Select Small font or Large font.
Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or

Off. When the message memory is full, your device cannot send or receive any

new messages. However, you can set your device to automatically replace old
messages in the Inbox and Outbox folders when new ones arrive.

Save sent messages—Select Always save, Always prompt, or Off.
Queue msgs. when digital unavailable—Select On, On prompt, or Off.

Messages are stored in the Outbox until they can be sent with digital service.

■ Picture messages

Your device comes with five preloaded pictures. You can save more pictures. If
necessary, you can overwrite any of the preloaded pictures. Pictures can be
attached to a message and sent using a text message to compatible phones.

25

Messages

Picture messages behave the same as text messages, but pictures take up more
memory than text message. You cannot send a picture message using e-mail.

Pictures are stored in the Images folder in Gallery. See "Gallery," p. 48.

Receive and save a picture message

Note: Only compatible devices that offer picture message features can
receive and display picture messages.

When you receive a picture message, your device beeps, displays 1 message received
or the number of multimedia messages received, and displays the messaging icon

in the upper left corner of the start screen as a reminder. When you have

unopened picture messages in your inbox displays.
Select Show to view the picture message. If you have more than one picture

message, scroll and select the message you want to view. Use the joystick to view
the whole picture if necessary.

You can save a received picture to your Templates folder by selecting Options >

Save picture. Enter a title and select OK. If your Templates folder is full of pictures,

you can scroll to the picture you want to replace and choose Select.

Compose and send a picture message

When you insert a standard picture into a message, the number of characters
that can be added changes. The number of characters is shown in the upper right
corner of the display screen.

1. From the start screen, select Menu > Messages > Multimedia msgs. >

Create message.

2. Write the message, and select Options > Insert > Image.

3. Open the folder that contains the picture you want to insert and select

Options > Insert.

To view another picture, select Back or Options > Insert, scroll to another
picture, and select Options > Insert.

4. Select Search to retrieve a phone number from your contacts list, Send to
enter the phone number, or Options > Send to e-mail, Send to many, or Send

to distrib. list (if a distribution list has been created) > Select.

To view or change the picture, select or Options > Preview or Delete picture.

26

Messages

■ Multimedia messages

A multimedia message can contain text, sound, a picture, and a video clip. Your
device supports multimedia messages that are up to 300 KB. If the maximum size
is exceeded, the device may not be able to receive the message. Depending upon
your network, you may receive a message that includes an Internet address where
you can go to view the multimedia message. Pictures are scaled to fit the display
area of the device. Your device has a multimedia message viewer for playing
messages and a multimedia inbox where incoming messages reside untilthe user
deletes or saves them. Once you save the multimedia message, you can use the
image as a screen saver or the sound as a ringing tone unless protected by copyright.

The appearance of a multimedia message may vary depending on the
receiving device.

Important: Exercise caution opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.

Copyright protections may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded. This function can be used
only if it is supported by your service provider or network operator. For availability
and a subscription to the multimedia messaging service, contact your service
provider or network operator.

Note: Only devices that offer compatible multimedia message features
can receive and display multimedia messages. Multimedia message
objects may contain viruses or otherwise be harmful to your device or PC.
Do not open any attachment if you are not sure of the trustworthiness of
the sender.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, animated GIF, WBMP, BMP, and PNG

• Sound: SP-MIDI, AMR audio, QCELP, EVRC, and monophonic ringing tones

• Video: clips in H.264 (Profile 0, level 10) format with MPEG-4 (SVPO), 3GPP,
3GPP2, with AMR audio

If a received message contains unsupported elements, these elements may be
replaced with the text Object format not supported.

You can receive a multimedia message notification but you cannot receive
multimedia messages if you have a call in progress, games or other applications
running, or an active browsing session. Because delivery of multimedia messages
can fail for a variety of reasons, do not rely solely upon them for essential
communications.

27

Messages

Multimedia message settings

Before you can use the multimedia message feature, you must specify whether you
want to receive messages at all times or only if you are in the service provider’s home
system. The default setting of the multimedia message service is generally on. This
feature is a network service. check with your service provider for more information.

The default setting of the multimedia message service is generally on. On the
receiving device, the default setting to receive a multimedia message is generally on.

When messages are available, you are notified 1 multimedia message available or
the number of multimedia messages available displays. Select Reject to turn
notification of multimedia messages on or off.

Allow or block multimedia reception

You can choose to receive all messages, to block all messages, or to receive messages
only when you are in the service provider’s home network.

From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings > Allow multimedia reception and one of the following:
Yes—Allow all incoming messages. When new messages arrive, Multimedia

message received or the number of multimedia messages received displays.
In home network—Allow incoming messages only if you are in the service provider’s

home system. This is a network service. Check with your service provider for
more information.

No—Block all incoming messages.

Allow or block advertisements

This setting is not available if multimedia reception is blocked.
From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings > Allow advertisements > Yes or No.

Other multimedia messages settings

Other multimedia settings include saving your messages to the Sent items folder.
From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings and one of the following:
Save sent messages—Select Yes to save sent multimedia messages to the Sent

items folder or No to discard messages after they are sent.

Delivery reports—Select On to be informed if the message was delivered or Off to

not be informed.

Default slide timing—Set the default time in mm:ss format for each slide in an

MMS to remain on the screen.

28

Messages

Folders

Your device has the following folders under Messages > Multimedia msgs..

Inbox—Contains received multimedia messages.
Outbox—Contains multimedia messages that are waiting to be transmitted.
Sent items—Contains sent multimedia messages.
Saved items—Contains saved multimedia messages that you can send later.

Write and send multimedia messages

1. From the start screen, select Menu > Messages > Multimedia msgs. >

Create message.

2. Enter your message text, and select Options > Insert > Image, Sound clip, New

sound clip, or Video clip. The list of available folders in the Gallery displays.

3. Open the desired folder, scroll to the image, sound clip, or video clip and
select Options > Insert.

Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred, or forwarded.

4. To add a new page or slide to the message, select Options > Insert > Slide.
This applies only if there is no video clip in the message.

Each slide can contain text, one image, and one sound clip. If the message
contains several slides, you can open the desired slide by selecting Previous

slide, Next slide, or Slide list.

5. To set the time interval between the slides, select Options >Slide timing.
Enter the time interval in mm:ss, and select OK.

6. To move the text to the top or bottom of the message, select Options > Place

text first or Place text last (default).

7. To insert a name from contacts, select Options > More options > Insert contact,
scroll to the desired name, and choose Select.

8. To insert a number, select Options > More options > Insert number. Enter the
number or search for it in contacts, and select OK.

9. To insert a calendar note that has been created, select Options > Insert >

Calendar note.

10. To insert a business card, select Options > Insert > Business card.

11. To delete an image, slide, video clip, or sound clip from the message, select

Options >

12. To add a subject to the message, select Options > More options > Edit subject,
enter a subject, and select OK.

Delete > Image, Sound clip, Video clip, or Slide.

29

Messages

13. To view the message or slide presentation before sending it, select

Options > Preview.

14. To save the message to Saved items, select Options > Save message.

15. To send the message, select Send or select Options > Send to e-mail,

Send to album, or Send to many. Send to album is an online network service.

Check with your service provider for more information.

16. Enter the recipient’s number or e-mail address, or search for it in contacts,
and select OK. The message is moved to the Outbox folder for sending.

It takes more time to send a multimedia message than to send a text message.
While the multimedia message is being sent, the animated indicator displays
and you can use other functions on the device. If there is an interruption while
the message is being sent, the device automatically tries to resend it a few times.
If this fails, the message remains in the Outbox folder and you can try to manually
resend it later. Check your Outbox folder for unsent messages.

Note: When sending messages, your device may display the words

Multimedia message sent. This is an indication that the message has

been sent by your device to the message center number programmed
into your device. This is not an indication that the message has been
received at the intended destination. For more details about messaging
services, check with your service provider.

Messages that you have sent are saved in the Sent items folder if the setting Save

sent messages is set to Yes. See "Other multimedia messages settings," p. 28. This

is not an indication that the message has been received at the intended destination.

Read multimedia messages

When a multimedia message is being received, a rotating appears in the
display along with the percentage display indicating the sending progress. Once
the message has been fully downloaded, a static displays and 1 multimedia

message available or the number of multimedia messages available displays.

• To view the message immediately, select Show; to save the message to the
inbox for later viewing, select Exit; to discard the message, select Discard.

• To view a saved message, select Menu > Messages > Multimedia msgs. >

Inbox and scroll to view the message.

While viewing the message, select Play to view the entire multimedia messages,
or select Options and one of the following:

View text—View only the text included in the message.
Open image, Open sound clip, Open calend. note, or Open video clip—View or

listen to the corresponding file.

30

Messages

Delete message—Delete the message you are viewing.
Forward to no., Forward to e-mail, Forward to album (if supported by operator) or

Forward to many—Forward the message to a phone number, to an e-mail address,

or to multiple recipients. Copyright messages cannot be forwarded.

Message details—View the sender’s name and phone number, the message center

used, reception date and time, message size and type.
While viewing the message, select Play to view the entire multimedia message, or

select Options > Save image, Save sound clip, or Save video clip to save the file to
the Gallery. Images, sound clips, and video clips must be opened before you can
save them.

If blinks and Multimedia me-mory full. View waiting msg.displays, the memory
for multimedia messages is full. To view the waiting message, select Show. Before
you can save the message, delete some of your old messages. See "Delete
messages," p. 33.

Reply to multimedia messages

Select Reply or Reply to all to enter a reply and send it to the original sender and
any other message recipients.

■ Voice messages

If you subscribe to voice mail, your wireless provider will furnish you with a voice
mailbox number. You need to save this number to your device to use voice mail.
When you receive a voice message, your device lets you know by beeping,
displaying a message, or both. If you receive more than one message, your device
shows the number of messages received.

Save voice mailbox number

Your wireless provider may have already saved your voice mailbox number to
your device. Select OK to leave the number unchanged.

1. At the start screen, select Menu > Messages > Voice messages > Voice

mailbox number. The Voice mailbox number displays.

2. If the box is empty, enter the voice mailbox area code and number and select OK.

Call and setup voice mail

1. Once you have saved the voice mailbox number, press and hold 1.

2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to setup voice mail.

31

Messages

Listen to voice messages

Once you have set up voice mail, press and hold 1 or use the Messages menu to
dial the voice mailbox number. Once you connect and the prerecorded greeting
begins, follow the automated instructions to listen to your voice messages.

Automate voice mail

You can insert special characters called dialing codes into phone numbers such as
voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow them
in the dialing string. See "Setup phone numbers with dialing codes," p. 38.

Voice mail services vary by service provider. The following instructions are examples
of common operations. Please check with your service provider for specific
instructions on using your voice mail service.

Write down voice mailbox number and process

1. Write down your voice mailbox number.

2. Call and check your voice mail as you normally would.

3. Write down your interaction with the recorded prompts step-by-step.
Keep in mind that each voice mail service may vary. However, it should
look something like this:

Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press #.

Be precise; you will need this information to "Setup phone numbers with dialing
codes," p 38.

Clear voice mail icon

To clear the voice mail icon from the display, at the start screen, select Menu >

Messages > Voice messages > Clear voice mail icon.

■ Web messaging

Web messaging is a network service. See "Network Services," p. 5.
If your wireless service provider supports this feature, you can use the Minibrowser

to check for e-mail messages. At the start screen, select Menu > Messages >

Minibrowser messages > Connect.

See "Mobile internet access," p. 77, for more information on using the
Minibrowser in your device to access Web pages.

32

Messages

■ Text message folders

Save messages

You can save drafts of messages or received messages to an existing folder or to a
folder that you have created.

1. Open the received message or create a new message, and select Options.

2. To save a received message, select Save > Sent items, Archive, Templates, or a
folder you have created.

3. To save the draft of a message you have created, select Save message > Drafts
or Templates.

View saved messages

1. At the start screen, select Menu > Messages > Text messages.

2. Select the folder containing the message you wish to view:

Inbox—Automatically stores received messages.
Outbox—Stores messages that have not been sent.
Sent items—Stores messages that have been sent.
Drafts—Stores messages created as drafts.
Archive—Store messages that you choose to Archive from other folders.
Templates—Stores pictures and prewritten templates. Preloaded templates

can be edited and customized.

My folders—Allows you to organize your messages by creating custom folders

and saving some of your messages here. Select Add folder to add a custom
folder, or Options > Add folder, Rename folder, Delete folder if a folder has
already been created.

3. When the folder opens, scroll to the message you wish to view, and Select.

■ Delete messages

If your message memory is full and you have more messages waiting at the
network, No space for new text messages appears on the start screen. You can
do the following:

• Read some of the unread messages, and delete them individually.

• Delete messages from some of your folders.

33

Messages

Delete a single message

1. At the start screen, select Menu > Messages > Text messages.

2. Select the folder containing the message you wish to delete.

3. Select the message you wish to delete.

4. Select Options > Delete.

5. Select OK to delete the message or Back to exit.

Delete all messages in a folder

1. At the start screen, select Menu > Messages > Text messages > Delete messages.

2. Select the messages you wish to delete:

All—Deletes all messages in all of the folders.
All read—Deletes any messages that have been read in all of the folders.
All unread—Deletes any messages that have not been read in all of the folders.

3. Select and Mark the folders that have messages you want to delete:

Inbox—Deletes all messages from the Inbox folder.
Sent items—Deletes all messages from the Sent items folder.
Outbox—Deletes all messages from the Outbox folder.
Drafts—Deletes all messages from the Drafts folder.
Archive—Deletes all messages from the Archive folder.

User defined folders—Deletes all messages from the user defined folder.

4. Select Done > Yes to empty the marked folder.

■ Delete folders

Only folders created in My folders can be deleted. The Inbox, Sent items, Archive
and Templates folders are protected. When you delete a folder, all messages in
the folder are also deleted.

34

Call log

5. Call log

Call log stores information about the last 30 missed, 30 received,
and 30 dialed calls. It also adds the total duration of all calls. When the number
of calls exceeds the maximum, the most recent call replaces the oldest.

Whether viewing missed, received, or dialed calls, the menu options are the same:

Time of call—Displays the date and time of the call.
Send message—Sends a message to the number.
Use number—Edits the number and associates a name with the number.
Save—Enters a name for the number and saves it to your contacts list.
Add to contact—Adds a number to a contact and saves it in your contacts list.
Delete—Clears the number from memory.
Call—Calls the number.

■ View missed calls

The missed calls feature does not function when your device is switched off.
Missed calls are calls that were never answered. To view missed calls:

1. If the message notification displays, select List.

2. When the phone number appears in the display, select Options.

3. Select an option to activate.
OR

1. At the start screen, select Menu > Call log > Missed calls.

2. Scroll to a name or number, and select Options.

3. Select an option to view or activate.

■ View received calls

Received calls are calls that have been answered.

1. At the start screen, select Menu > Call log > Received calls.

2. Scroll to a name or number, and select Options.

3. Select an option to view or activate.

35

Call log

■ View dialed numbers

Dialed calls are previous numbers you have dialed from your device:

1. At the start screen, press the call key.
OR
At the start screen, select Menu > Call log > Dialed numbers.

2. Scroll to a name or number, and select Options.

3. Select an option to view or activate.

View call times

You can make or receive calls to or from the same number and view up to five
calls with the time each call occurred. Your device clock must be set for this
feature to work accurately.

1. From the start screen, select Menu > Call log > Missed calls, Received calls, or

Dialed numbers > Options.

2. While viewing a missed or received call, select Options > Time of call.

3. Press the joystick down to view the most recent call times from this number;
select Back to return to the options list.

■ Delete call logs

You can delete any missed, dialed, or received calls from device memory.

1. At the start screen, select Menu > Call log > Clear recent call lists.

2. Select the call type you would like to clear: All, Missed, Received or Dialed.

■ View duration of calls

Contact your service provider for the actual calls and services invoice, which may
depend on network features, rounding off for billing, taxes and so forth.

Select Menu > Call log > Call timers > Last call duration, Dialed calls' duration,

Received calls' duration, All calls' duration, Life timer, or Clear timers. After selecting
Clear timers, enter your lock code, and select OK. See "Security settings," p. 62.

Note: All call timers, except the life timer, are reset to zero when

Clear timers is selected.

Note: Some timers, including the life timer, may be reset during service
or software upgrades.

To activate the call timer on the start screen while in a call, select Details > Show

call time on display > On or Off.

36

Call log

■ View duration of data and fax calls

Data and fax calls are a network service. See "Network Services," p. 5. If your
wireless service provider supports this feature, you can view the size or duration
of sent or received data and fax calls.

Note: The actual time invoiced for calls and services by your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.

1. At the start screen, select Menu > Call log > Data/fax calls.

2. Scroll to one of the following options:

Last sent data/fax—View the size (KB) of the last sent data/fax call.
Last received data/fax—View the size (KB) of the last received data/fax call.
All sent data/fax—View the size (KB) of all sent data and fax calls.
All received data/fax—View the size (KB) of all received data and fax calls.
Duration of last data/fax call—View the duration time of the last data or

fax call.

Duration of all data/fax calls—View the duration time of all calls.
Clear all data/fax logs—Select OK > Yes to clear all data/fax logs.

■ View duration of minibrowser

Minibrowser is a network service. See "Network Services," p. 5. If your wireless
service provider supports this feature, you can view the size or duration of sent or
received data from the Minibrowser.

Note: The actual time invoiced for calls and services by your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.

1. At the start screen, select Menu > Call log > Minibrowser calls.

2. Scroll to one of the following options:

Last sent browser data—View the size (KB) of the last sent browser data.
Last received browser data—View the size (KB) of the last received data.
All sent browser data—View the size (KB) of all sent browser data.
All received browser data—View the size (KB) of all received browser data.
Last browser session—View the duration time of the last browser session.
All browser sessions—View the duration time of all browser sessions.
Clear all browser logs—Select OK > Yes to clear all browser logs.

37

Contacts

6. Contacts

The contacts list can hold up to 500 contacts with multiple numbers
and text notes for each contact. The amount of numbers and text entries that you
can save may vary, depending on length and the total number of entries in the
contacts list.

■ Add new contacts

You can access the contacts list at the start screen. Press the Right selection key
or, if the Right selection key on your device has a network operator menu, select

Menu > Contacts.

Save contact name and number

1. At the start screen, use the keypad to enter the phone number you wish to save.

2. Select Save.

3. Enter the name, and select OK.

Save contact number only

1. At the start screen, use the keypad to enter the phone number you wish to save.

2. Press and hold Options.

Save an entry

1. At the start screen, select Menu > Contacts > Add new.

2. Enter the name, and select OK.

3. Enter the phone number, and select OK > Done.

Setup phone numbers with dialing codes

Dialing codes instruct the receiving system to pause, wait, bypass, or accept the
numbers that follow them in the dialing string.

1. At the start screen, select Menu > Contacts > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot and select Assign.

3. Enter your mailbox number, including the area code.

4. Refer to dialing codes and enter any codes as necessary.
For example, if you pause for 5 seconds after connecting to voice mail, enter p

twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.

38

Contacts

5. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.

6. Enter a name (such as Voice Mail), and select OK.

To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key at the start screen.

Insert dialing codes

Press * repeatedly to cycle through dialing codes. Once the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.

The following dialing codes are available:

* — Bypasses a set of instructions.
p— Pauses for 2.5 seconds before sending any numbers that follow.
+— Replaces the international access code.
w—Waits for you to press the call key before sending the numbers or codes

that follow.

Save multiple numbers and text items

You can save different types of phone numbers and short text items per name to
the contacts list. The first number you save for any entry is automatically set as
the default, or primary number, but the primary number can always be changed.

1. At the start screen, scroll to the entry to which you wish to add a phone
number or text item.

2. Select Details > Options > Add number or Add detail.
If you selected Add number, select General, Mobile, Home, Work, or Fax.
If you selected Add detail, select E-mail address, Web address, Street address,

or Note.

3. Enter the number or text for the type you have selected, and select OK.

4. To change a number type (General, Mobile, Home, Work, or Fax), select Change

type in the options list.

You can also change which phone number is the default (primary) number for the
contact entry.

1. At the start screen, use the joystick to scroll down and select the number you
wish to change, and select Details.

2. Scroll to the number you wish to set as default, and select Options >

Set as default.

39

Contacts

Set up voice tags

For information on setting up voice tags and other voice features, see "Voice
commands," p. 59.

Caller groups

You can add contacts list entries to any of five caller groups, and then assign a
unique ringing tone or graphic to that group. This enables you to identify callers
from the group by their unique ringing tone or graphic.

1. Scroll to a name in your contacts list you would like to add to a caller group,
and select Details.

2. Select Options > Caller groups > Family, VIP, Friends, Business, or Other.

3. Select Options to display the following caller group options:

Rename group—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group. For individual

contacts in the group, the group tone sounds even if another tone was
assigned to the individual.

Group logo—Turn the graphic for the caller group On or Off, or View the graphic.
Group members—Add or remove members from the caller group.

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2–9; then dial those
entries by pressing and holding the assigned key. See "1-touch dialing," p. 56,
to activate or deactivate 1-touch dialing.

Assign a key to 1-touch dialing

1. At the start screen, select Menu > Contacts > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot, and select Assign.

3. Enter the number (including the area code), and select OK; or select Search to
retrieve a number from the contacts list.

4. Enter a name for the number, and select OK.
If 1-touch dialing is off, the device displays a prompt asking if you would like

to turn 1-touch dialing on.

5. Select Yes to activate 1-touch dialing.

Change 1-touch dialing numbers

1. At the start screen, select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you wish to change, and select

Options > Change.

40

Contacts

3. Enter the new number; or select Search to retrieve a number from the
contacts list, and select OK.

4. Enter a name for the entry, and select OK.

Delete 1-touch dialing numbers

1. At the start screen, select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing location you wish to delete, and select Options >

Delete > Yes.

■ Voice tags

You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note that:

• Voice tags are not language-dependent. They are dependent on the
speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.

• Very short names are not accepted. Use long names and avoid similar names
for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely upon voice dialing in all circumstances.

Assign a voice tag to an entry

Before you can use voice dialing, you must first assign a voice tag to the number.

1. At the start screen, press the joystick down to view the contacts list.

2. Highlight the contact you want to assign a voice tag to. Select Details >

Options > Add voice tag > Start.

3. Speak clearly into the microphone. Do not select Quit unless you want to
cancel the recording. The device automatically stops recording and saves and
replays the voice tag.

The icon appears next to commands that have voice tags assigned.
If recording is not successful, your device displays Voice system error.

Select Options > Add voice tag, and repeat step 3.

41

Contacts

Dial a number

1. Press and hold the Right selection key.

2. When you hear several beeps and Speak now appears, release the key.

3. Pronounce the voice tag clearly into the microphone.
When the device finds the voice tag, Found: appears, and the device

automatically dials the number. If the device does not locate a number or
recognize the voice tag, No match found appears.

Voice tags

After you have associated a voice tag to a contact, you can select Names > Voice

tags > Select > Playback, Change, or Delete.

■ Edit contacts list entries

1. Scroll through the contacts list to highlight the entry you would like to edit,
and select Details > Options. The list of options varies depending on whether
you are editing a contact listed by phone number or contact name.

2. Some of the following options may be available:

Add voice tag or Voice tag—Add a voice tag to the contact or select the voice

tag already associated with the contact to Playback, Change, or Delete.

Edit number or Edit detail—Edit an existing phone number or the details attached

from the contact.

Delete number or Delete detail—Delete a phone number or the details attached

from the contact.

Use number—Edit the number and associate a name with the number. Available

when a contact is selected that is listed with a contact name. Select Options
to use the number.

Change type—Change the number type to General, Mobile, Home, Work, or
Fax or the detail type to E-mail address, Web address, Street address, or Note.

Set as default—Change the default number of the contact.
Add number—Add a number to the contact.
Add detail—Add an address or note to the contact.
Add image—Add a photo to the contact.
Caller groups—Add the contact to an existing caller group.
Custom tone—Set a ringing tone to the contact different than the default.
Send bus. card—Send the contact as a business card to another device.

42

Contacts

Send message—Create and send the contact a text message or

multimedia message.

1-touch dialing—Add the contact to your 1-touch dialing list.
Edit name—Edit the name of the contact.
View name—View the name of the contact. Available when a contact is

selected that is listed with a contact name.

Delete—Delete the entire contact entry from your contacts list.

3. Edit the option to your preference, and select OK.

■ Delete contacts entries

1. At the start screen, select Menu > Contacts > Delete.

2. To delete individual entries, select One by one.

3. Scroll to the entry you wish to delete, and select Delete > Yes to confirm.

4. To delete the entire contents of your contacts list, select Delete all > Yes.

5. Enter the lock code, and select OK. See "Security settings," p. 62.

■ View the contacts menu

1. At the start screen, select Menu > Contacts and view the following options:

Search—Find a name or select from a list.
Add new—Add a contact to your contacts list.
Edit name—Edit an existing name.
Delete—Delete a name and its associated numbers.
Add number—Add a number to an existing contact.
Settings—Change the contacts list view or check the memory status of

your device.

1-touch dialing—View or modify the list of 1-touch dialing numbers.
Voice tags—Attach, listen to, or modify a voice tag to a contact in the

contacts list.

My number—View your own phone number.
Caller groups—View and edit the properties of any of the caller groups,

including Family, VIP, Friends, Business, or Other.

2. Select an item to activate the feature or enter its submenu.

43

Contacts

Search for a name

1. At the start screen, press the joystick down to display the contents of your
contacts list.

2. Press the key that corresponds to the first letter of the name for which you
are searching.

3. Scroll to select a contact, and select Details to view the details.

Configure settings

You can select how the contacts appear in your contacts list and view the amount
of memory used or available in your device.

At the start screen, select Menu > Contacts > Settings >Scrolling view to change
view of name list.

■ Send and receive contacts (business cards)

You can send and receive an entry in your contacts list using text messaging or
IR, if supported by your wireless provider. See "Receive a business card," p. 68.

Send a business card

You can send a business card as a text message to a compatible phone or other
handheld device.

1. Highlight the entry from the contacts list that you wish to send, and select

Details > Options > Send bus. card > Via infrared, Via text message, or Via
multimedia. Primary number or All details options appear only if you have

more than one number or detail saved to the contact entry.

2. Enter the number for your recipient, or select Search to retrieve a number
from your contacts list.

3. Select OK and the business card is sent.

44

Camera

7. Camera

You can take photos and record video clips with the built-in camera.
The camera lens is on the back of the device. The camera produces
photos in JPEG format and video clips in H.263 (SubQCIF) format.

After you take a picture or video, you can attach it to or send it with a multimedia
message, save it as a wallpaper, save it on a compatible PC using Nokia PC Suite
software, and upload it to a Web address with the content image uploader. When
you attach a picture to an entry in your list of contacts, the picture is displayed
when the contact calls you.

The Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i devices support an
image capture resolution of 640 x 480 pixels. The image resolution in these
materials may appear different.

If there is not enough memory to take a new photo, delete old photos or other
files in the Gallery.

■ Take a photo

1. At the start screen, press the joystick up to activate the camera or select

Menu > Camera.

2. Select Capture to take the photo. When taking a photo, a shutter sound is
heard, the photo displays on the screen, and either a blinking icon or scrolling
indicator displays as the photo is saved to the Images folder of Gallery.

To change the camera mode to standard, portrait, night or video, see "Change
mode," p. 46.

3. Select Back to take another photo or Options and choose from one of
the following:

Zoom—Zoom in closer before capturing a photo or get a closer look at the

captured photo; use the joystick to navigate around the photo.

Send—Select Via multimedia or Via infrared to send a photo to a compatible

device or PC.

Rename—Enter or edit the name of the captured photo and select OK.
Open Gallery—Open the Gallery to view saved images, videos, and recordings.
Set contrast—Use the joystick to adjust the contrast of the captured photo.
Set as wallpaper—Use a captured photo for wallpaper.
Details—View the Name, Size, Created, Format, Resolution, or Copyright of a

captured photo.

45

Camera

Change mode

At the start screen, select Menu > Camera > Options > Change mode or, from the
viewfinder mode, hold and press the right or left joystick position to switch
between the following modes:

Standard photo—Take normal landscape photos.
Portrait photo—Take a smaller icon-sized, vertical photo, which can be added to

an entry in your contacts list.

Night mode—Take a photo when the lighting is dim and the camera needs a longer

exposure time for the photo to be of good quality.

Video—Record a video. See "Record a video clip," p. 47.

Self-timer

At the start screen, select Menu > Camera > Options > Self-timer to set a timer
and delay capturing a photo for 10 seconds. Select Start a beep sounds while the
self-timer runs and beeps faster when the camera is about to capture the photo.
After the timeout, the camera takes the photo and saves the photo in the Images
folder of the Gallery menu.

Settings

At the start screen, select Menu > Camera > Options > Settings to change the
settings in the camera mode. Select one of the following options:

Default mode—Select Standard photo, Portrait photo, Night mode or Video as

the default.

Image quality—Define file compression when saving the image. Select High, Normal,

or Basic. High uses the least file compression and provides the best image quality
but takes more memory.

Video clip length—Select Default ( 15 seconds) or Maximum (2.5 minutes, depending

on conditions). Only video clips that are default length or shorter can be sent in a
multimedia message.

Camera sounds—Select On or Off.
Default title—Select Automatic to use a predefined title or My title to key in or

edit a new title.

Image and video storage—Select the folder for image storage.

46

Camera

Other options

Zoom—Zoom in closer to your image before capturing a photo or get a closer look

at the captured photo. Use the joystick to navigate around the photo.

View previous—View the previously captured photo.
Open Gallery—Open the Images folder of the Gallery menu.

Record a video clip

1. From the start screen, select Menu > Camera > Options > Change mode >

Video > Record. While you are recording, the recording indicator and the

remaining recording time display.

2. Select Pause to pause the recording, Continue to resume the recording, or

Stop to stop the recording. The device saves the recording in the Video clip

folder of the Gallery menu.

3. Select Back to record another video or select Options and one of the following:

Delete—Delete the video clip.
Send—Send the video clip to another device as a multimedia message or by

using IR connectivity.

Rename—Rename the video clip.
Open Gallery—Go to the Video clip folder of the Gallery menu.
Mute audio or Unmute audio—Turn the sound on or off.
Set contrast—Increase or decrease contrast of the selected video using

the joystick.

Details—View details of the selected video, such as name, size, time and date

created, length, file format, and copyright information.

47

Gallery

8. Gallery

You can save pictures, video clips, recordings, and ringing tones to
folders in the gallery and add new folders to the ones already there.
Images and tones can be downloaded using multimedia messages,
text messages, mobile Internet sites, or Nokia PC Suite.

Note: Only compatible devices that offer compatible multimedia
message features can receive and display multimedia messages.

Your device supports a digital rights management system to protect content that
you have acquired. Content such as a ringing tone, can be protected and associated
with certain usage rules, for example, the number of usage times or a certain usage
period. Usage rules are defined in the content activation key that can be delivered
with the content or delivered separately, depending on the service provider. You
may be able to update the activation key. Always check the delivery terms of any
content and activation key before acquiring them, as they may be subject to a fee.

Copyright protection may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.

Your device has about 10 MB of memory for storing files in the gallery. This memory
is not shared with other functions, such as contacts. If the device displays a
message that the memory is full, delete some existing files before proceeding.

■ Folders

1. At the start screen, select Menu > Gallery > Images, Video clips, Music files,

Graphics, Tones, or Recordings folder.

2. Select Open to view a list of the files in the folder or select Options to access
the following:

Delete folder—Delete a folder you have created. You cannot delete a preset folder.
Move—Move the selected folder into another folder. After selecting Move, scroll

to another folder, and select Options > Move. You cannot move a preset folder.

Rename folder—Rename a folder you have created. You cannot rename a

preset folder.

Details—Show the name, size, and date of creation of the selected folder.
Type of view—Select List with details, List, or Grid to determine how the folders

and the files within folders are displayed.

Sort—Sort the contents of the selected folder by name, date, format, or size.
Add folder—Create a new folder.
Activation key list—View the list of available activation keys. You can delete

activation keys if desired.

48

Media

9. Media

■ Media player

With the media player you can download, view, and play compatible images,
audio and video files, and animated images from a variety of sources.

The media player allows you to play streaming videos and streaming audio from a
network server. Streaming functionality is a network service and requires network
support. Check the availability of these services, pricing, and tariffs with your
network operator or the service provider whose service you wish to use.
Service providers will also give you instructions on how to use their services.

From the start screen, select Menu > Media > Media player and one of the following:

Online media—Connect to the operator’s network. This is a network service.

Check with your service provider for pricing and information.

Open Gallery—Open the Gallery. From Gallery, you can play stored audio and

video files. See "Gallery," p. 48.

Go to address—Enter the address of a mobile Internet service, and select OK.

■ Radio

Your phone has an FM radio that also functions as an alarm clock radio. To listen
to the FM radio on your phone, connect a compatible music stand or stereo
headset to the connector on the bottom of the phone. The FM radio uses the wire
of the headset as an antenna. A compatible headset needs to be attached to the
device for the FM radio to function properly.The quality of a radio broadcast
depends on coverage of the radio station in that particular area.

Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.

Turn the radio on and off

1. Connect the phone to a compatible headset or music stand.

2. From the start screen, select Menu > Media > Radio.

3. To turn off the radio, press and hold the end key.

49

Media

Use the radio

With the radio on, select Options and one of the following:

Turn off—Turn off the radio.
Save channel—Save the current station to one of 20 locations.
Automatic tuning—Press the joystick up or down to start the channel search.

Select OK when a channel is found.

Manual tuning—Press the joystick up or down to search in increments of 0.05 MHz.
Set frequency—Manually enter the frequency of a known radio station.
Delete channel—Delete a saved channel.
Rename—Rename a saved channel and select OK.
Loudspeaker or Headset—Listen to the radio through the speakerphone or

through the headset.

Mono output or Stereo output—Listen to the radio in monaural mode (default) or

in stereo. Stereo output is available through a stereo enhancement.
To set the radio frequency, press * and use the keypad to enter the frequency of a

known radio station. To tune the radio manually, press #; then press the joystick
up or down to search in increments of 0.05 MHz.

To adjust the radio volume, press the Volume up and Volume down keys.
When an application using a browser connection is sending or receiving data, it

may interfere with the radio.
When you place or receive a call, the radio automatically mutes. Once the call is

ended, the radio switches back on.

Save a radio channel

You can save a preset station to any one of 20 locations in memory, and then
tune to that station by using the joystick with the radio on.

1. With the radio on, press and hold the joystick up or down to start the channel
search. Searching stops when a channel is found.

2. To save the channel, select Options > Save channel.

3. Enter a name for the channel, and select OK.

4. Select an (empty) location to save the channel.

While the radio is playing, you can quickly save an FM station to 1–9
memory locations.

1. Press and hold the corresponding number key.

2. Enter the name of the channel, and select OK.

50

Media

■ Voice recorder

This feature allows you to record pieces of speech or sound with your device and
listen to them later. The total available time is 3 minutes if no memos have been
stored. The maximum length of a recording depends on how much memory
remains available.

From the start screen, select Menu > Media > Voice recorder > Record to start the
recording, or Recordings list to manage the folder you have defined for recording
storage. Save recordings to the Recordings folder or to another folder in the Gallery.

Record speech or sound

1. At the start screen, select Menu > Media > Voice recorder > Record.

2. After the recorder start tone is heard, begin recording speech or sound.

3. When you are finished recording, select Stop and your recording is saved to
the Recordings folder in the Gallery.

Recording options

After you have saved the recording to the Recordings folder, select Recordings

list, open the Recordings folder in the Gallery, and scroll to the recording you

created. Select Open to listen to the recording using the earpiece, or Options to:

Delete or Delete folder—Erase the recording.
Rename or Rename folder—Change the name of the recording.
Set as ring tone—Use your recording as a ringtone.
Details—Show the name, size, and date of creation of the selected folder.
Type of view—Choose whether to view the folders as a list with details, list only or

a grid.

Sort—Sort the contents of the selected folder by name, date, format, or size.

51

Settings

10. Settings

Use this menu to change profiles, tone settings, time and date
settings, call settings, phone settings, voice commands, enhancement settings,
security settings, application settings, network settings, network services, and
restore factory settings.

■ Profiles

Profiles define how your device reacts when you receive a call or message, how
your keypad sounds when you press a key, and more. Ringing options, keypad
tones, and other settings for each of the available profiles can be left at their
default setting, or customized to suit your needs. The following profiles are
available: Normal, Silent, Meeting, Outdoor, and Pager.

Profiles are also available for enhancements such as headset and car kit.
See "Enhancements," p. 83.

1. At the start screen, select Menu > Settings > Profiles.

2. Select the profile of your choice and Activate.

Customize a profile

You can customize any of the profiles a variety of ways.

1. At the start screen, select Menu > Settings > Profiles.

2. Select the profile you wish to customize.

3. Select Customize.

4. Select the option you want to customize: Incoming call alert, Ringing tone,

Ringing volume, Vibrating alert, Message alert tone, Keypad tones, Warning
tones, Alert for, or Profile name. You cannot rename the Normal profile.

Set a timed profile

Timed profiles can be used to prevent missed calls. For example, suppose you
attend an event that requires your device be set to Silent before the event starts,
but you forget to return it to Normal until long after the event. A timed profile
can prevent missed calls by returning your device to the default profile at a time
you specify. Timed profiles can be set up to 24 hours in advance.

1. At the start screen, select Menu > Settings > Profiles.

2. Select the profile you wish to activate and select Timed for timed expiration.

3. Enter the time in mm:ss for the profile to expire, and select OK.

52

Settings

■ Display settings

Wallpaper

You can set your device to display a background picture (wallpaper) on the
start screen.

1. At the start screen, select Menu > Settings > Display settings > Wallpaper >

Select wallpaper > Graphics > Open.

2. Browse the Graphics folder.

3. When you arrive at the image of your choice, select Options > Set as wallpaper.

4. To activate or deactivate wallpaper, at the start screen, select Menu >

Settings > Display settings > Wallpaper > On or Off.

Color schemes

You can change the color of some display components in your device, such as
indicators and signal bars.

1. At the start screen, select Menu > Settings > Display settings > Color schemes.

2. Select the color scheme of your choice.

Menu view

You can change the view of the main menu. The grid view shows menu icons only
in grid format, and the list view shows the icon and menu name in menu order.

At the start screen, select Menu > Settings > Display settings > Menu view >

List or Grid.

Backlight

You can choose whether the backlights will be always on, off, or on for a
selected time.

At the start screen, select Menu > Settings > Display settings >

Backlight time-out > 15 seconds or Customize.

Screen saver

From the start screen, select Menu > Settings > Display settings > Screen saver >

On, Off, Select s. saver, or Time-out (10 seconds, 30 seconds, or Other).

53

Settings

■ Tone settings

You can adjust the ringing volume, keypad tones, and more for the active profile.
See "Customize a profile," p. 52, for more information on profile settings.

Select Menu > Settings > Tone settings and one of the following:

Incoming call alert—Select how the device notifies you of an incoming call.
Ringing tone—Select the ringing tone for incoming calls.
Ringing volume—Set the volume of your ringing tone.
Vibrating alert—Turn the vibrating alert On or Off.
Message alert tone—Select the tone for received messages.
Keypad tones—Set the volume of your keypad tones (or turn them off).
Warning tones—Turn warning and confirmation tones On or Off.
Alert for—Define which caller groups the selected profile will accept or decline.

See "Caller groups," p. 40.

■ Time and date settings

Clock

At the start screen, select Menu > Settings > Time and date settings > Clock >

Show clock or Hide clock, Set the time, Time zone or Time format.

Date

At the start screen, select Menu > Settings > Time and date settings > Date >

Show date or Hide date, Set the date, Date format, or Date separator.

Set the auto-update of date and time

Auto-update is a network service. See "Network Services," p. 5. If your wireless
service provider supports this feature, you can allow the digital network to set
the clock, which is useful when you are out of your home area, for instance when
you have traveled to another network or time zone.

At the start screen, select Menu >Settings > Time and date settings > Auto-

update of date & time > On, Confirm first, or Off.

If you use the Auto-update of date & time option while outside your digital network,
you may be prompted to enter the time manually. Network time will replace the
time and date when you re-enter your digital network.

If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).

54

Settings

■ Call settings

Location info sharing

Location info sharing is only available for the Nokia 6235i and Nokia 6236i devices.
Location info sharing is a network service. See "Network Services," p. 5.

If your wireless service provider supports this feature, then location info sharing
allows the device to share position information over the network. For calls to
emergency numbers, this position information may be used by the emergency
operator to determine the position of the device. The functionality and accuracy
of this feature are dependent on the network, satellite systems, and the agency
receiving the information. This feature may not function in all areas or at all times.

At the start screen, select Menu > Settings > Call settings > Location info sharing >

Emergency or On > OK or No.
Emergency—This is the default profile. The device location information is shared only

during an emergency call to the official emergency number programmed into your
device. The screen displays in the upper left hand corner of the start screen.

On—The device location information is shared with the network whenever the

device is powered on and activated. The screen displays in the upper left
hand corner of the start screen.

Note: Location information will always be shared with the network
during emergency calls to the official emergency number programmed
into the device, regardless of which setting is selected. After placing an
emergency call the device remains in emergency mode for five minutes.
During this time, the location information will be shared with the network.
See "Emergency calls," p. 89.

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key
except the Power key, Right selection key, or end key.

At the start screen, select Menu > Settings > Call settings > Anykey answer >

On or Off.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your device redials the
number (number of times is specified by the network), and notifies you once the
network is available.

At the start screen, select Menu > Settings > Call settings > Automatic redial >

On or Off.

55

Settings

1-touch dialing

You can activate or deactivate 1-touch dialing. At the start screen, select Menu >

Settings > Call settings > 1-touch dialing > On or Off. See "Set up 1-touch

dialing," p. 40.

Automatic update of service

Your device is capable of receiving updates to wireless services sent to your device
by your service provider. At the start screen, select Menu > Settings > Call settings >

Automatic update of service > On or Off.

Calling card

If you use a calling card for long distance calls, you can save the calling card numbers
in your device. Your device can store up to four calling cards. Contact your calling
card company for more information.

Save information

1. At the start screen, select Menu > Settings > Call settings > Calling card.

2. Enter your lock code, and select OK. See "Change lock code," p. 63.

3. Scroll to one of the four card memory locations, and select Options > Edit >

OK > Dialing sequence.

4. Select one of the following sequence types:

Access no.+ phone no.+ card no.—Dial 1-800 access number, phone number,

then card number (+ PIN, if required).

Access no.+ card no.+ phone no.—Dial 1-800 access number, card number

(+ PIN, if required), then phone number.

Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the

phone number) and phone number you want to dial, then card number
(+ PIN, if required).

5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.

6. Select Card name, enter the card name, and select OK.

Make calls

After you have saved your calling card information in your device, you can make a
call using your calling card.

1. At the start screen, select Menu >Settings > Call settings > Calling card.

2. Enter your lock code, and select OK. See "Change lock code," p. 63.

56

Settings

3. Scroll to the calling card of your choice, select Options > Select > OK.

4. Press the end key to return to the start screen; then enter the phone number,

including any prefix (such as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card for instructions.

5. Press and hold the call key for a few seconds until Card call is displayed.

6. When you hear the tone or system message, select OK.

International prefix

You can store an international dialing prefix into your device. When you enter + at
the beginning of a phone number, your device automatically inserts the international
dialing prefix that you have stored after you press the call key. See "Insert dialing
codes," p. 39.

Data or fax calls

Data or fax calling is a network service. See "Network Services," p. 5. If your wireless
service provider supports this feature, you can set up the device to send or receive
data or fax calls when a terminal, such as a PDA or PC, is connected.

For better performance during data calls, place the device on a stationary surface
with the keypad facing downward. Do not move the device by holding it in your
hand during a data call.

For more information on connectivity, refer to the PC/PDA Connectivity Guide
which can be downloaded from the Nokia website at http://www.nokiausa.com

1. At the start screen, select Menu > Settings > Call settings > Data/fax calls >

Incoming data/fax call.

2. Select one of the following options:

Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.

3. When you are finished receiving the fax or data call, repeat steps 1 and 2 and
select Normal.

.

Data transfer

You can view the transmission speed when sending or receiving data or fax calls.
At the start screen, select Menu > Settings > Call settings > Data/fax calls > Data

rate display > Graphic or Off.

57

Settings

Call summary

Your device can display the time spent on a call when you hang up. At the start
screen, select Menu > Settings > Call settings > Call summary > On or Off.

Ringing tone for no caller ID

You can select a different ringing tone for calls received with no caller ID.
From the start screen, select Menu > Settings > Call settings > Ringing tone for

no caller ID > On or Off. See "Customize a profile," p. 52, for more information on

selecting a ringing tone.

■ Phone settings

Phone language

1. At the start screen, select Menu > Settings > Phone settings > Phone language.

2. Scroll to the language of your choice and press Select.
The phone language affects the time and date formats of the clock, alarm clock,

and calendar.

Touch tones

Touch tones, or DTMF tones, are the tones that sound when you press the keys on
your device keypad. You can use touch tones for many automated dial-up
services such as banking and airlines, or for entering your voice mailbox number
and password.

Touch tones are sent during an active call. You can send them manually from your
device keypad, or send them automatically by saving them in your device.

Set type

1. At the start screen, select Menu > Settings > Phone settings > Touch tones >

Manual touch tones.

2. Select one of the following options:

Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the Touch tone

length option.
Off—Used to turn off tones. No tones are sent when you press a key.

58

Settings

Set length

You can specify touch-tone length for the Fixed option. At the start screen, select

Menu > Settings > Phone settings > Touch tones > Touch tone length > Short

(0.1 seconds) or Long (0.5 seconds).

Memory status

You can view the size of memory available for application installations.
See "Memory," p. 79.

Start-up tone

You can select to have a start-up tone when you first turn on your device. At the
start screen, select Menu > Settings > Phone settings > Start-up tone > On or Off.

Create a banner

If your wireless service provider supports this feature, you can choose whether
the display shows the operator logo or customized text when the device is in the
idle state. At the start screen, select Menu > Settings > Phone settings > Banner >

Default or Customize.

Help text activation

Your device displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 10 seconds and wait for the help text to display.
If necessary, use the joystick to page through the full help text.

The default setting for help text is On. However, you can turn help text on or off.
At the start screen, select Menu > Settings > Phone settings > Help text

activation > On or Off.

■ Voice commands

You can dial up to 25 stored numbers using voice command dialing. See "Voice
tags," p. 41.

Before using voice tags, note that:

• Voice tags are not language-dependent. They are dependent on the
speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

59

Settings

• Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.

• Very short names are not accepted. Use long names and avoid similar names
for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely upon voice dialing in all circumstances.

Handsfree operation with voice commands

You can set as many as five voice commands, which allow handsfree operation of
certain features in your device.

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the device function.

1. At the start screen, select Menu > Settings > Voice commands.

2. Select the device function you wish to tag: Profiles, Voice mailbox, Radio,

Infrared, Voice recorder or Call log > Add.

3. Select Start, and speak the voice tag clearly into the microphone. Do not
select Quit unless you want to cancel the recording.

The device replays and saves the recorded tag. The icon appears next to
commands that have voice tags assigned.

Activate a voice command

After you have associated a voice tag with a function in your device, you can
issue a command by speaking the voice tag.

1. From the start screen, press and hold the Right selection key.

2. When Speak now displays, pronounce the voice tag clearly into the microphone.

Select Playback to listen to the voice command tag.
When the device finds the voice tag, Found: displays, and the device plays the

recognized voice tag through the earpiece. The function you requested is activated.

Options

After you have associated a voice tag to a command, you can select one of the
following options:

Change—Change the voice command.
Delete—Erase the voice command tag.

60

Settings

■ Enhancement settings

The enhancement settings menu is shown only if the device has been connected
to a compatible enhancement. At the start screen, select Menu > Settings >

Enhancement settings > Headset, Handsfree, Loopset, TTY/TDD, or Charger.

Headset

Important: The headset may affect your ability to hear sounds around
you. Do not use the headset in situations that may endanger your safety.

Select the option of your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when

a headset is connected.

Automatic answer—Calls are answered automatically after one ring when a

headset is connected. Select On or Off.

Handsfree

Select the option of your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when

your device is connected to a car kit.

Automatic answer—Answer calls automatically after one ring when a car kit is

connected. Select On or Off.

Lights—Choose to keep the device lights always on, or to shut off automatically

after several seconds. Select On or Automatic.

Loopset

The LPS-4 Loopset is recommended for use with your device. Select the option of
your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when

your device is connected to a loopset.

Automatic answer—Answer calls automatically after one ring when a loopset is

connected. Select On or Off.

TTY/TDD

Check with the manufacturer of the TTY/TDD device for a connecting cable that is
compatible with the Nokia device. TTY/TDD communications depend on network
availability. Check with your service provider for availability and description
of services.

61

Settings

Charger

Select the option of your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when

your device is connected to the charger.

Lights—Choose to keep the device lights always on, or to shut off automatically

after several seconds. Select On or Automatic.

■ Security settings

Activate or deactivate phone lock

The phone lock feature protects your device from unauthorized outgoing calls or
unauthorized access to information stored in the device. To activate or deactivate
the phone lock setting on your device:

1. At the start screen, select Menu > Settings > Security settings.

2. Enter the lock code, and select OK. See "Change lock code," p. 63.

3. Select Phone lock and one of the following options:

Off—Immediately turns off the device lock feature.
Lock now—Immediately turns on the device lock feature.
On power-up—Turns on the device lock feature the next time you turn the

device on.

If you selected Lock now, you will be prompted to enter your lock code when you
select Menu, the right softkey, or the left softkey. When the lock code has been
entered, phone lock deactivates and your device functions normally.

When phone lock is activated, Phone locked is displayed each time you turn your
device on or off.

When the device is locked, calls still may be possible to the official emergency
number programmed into your device.

Call not allowed is displayed if you attempt to place a call while your device is

locked. To answer a call with phone lock on, select Answer or press the call key.

Allow numbers when phone locked

When phone lock is on, the only outgoing calls that can be made are to the
emergency number programmed into your device (for example, 911) or the
number stored in the Allowed no. when phone locked location:

62

Settings

1. At the start screen, select Menu > Settings > Security settings.

2. Enter the lock code, and select OK. See "Change lock code," p. 63.

3. Select Allowed no. when phone locked. Highlight an empty folder and select

Assign and enter the phone number; or select Assign > Search to recall the

number from Contacts. Select OK.

Call the allowed phone number

1. At the start screen, press the joystick down and highlight the contact you
wish to call.

2. Press the call key to place the call.

Change lock code

Avoid using codes similar to emergency numbers such as 911 to prevent
accidental dialing of the emergency number.

The preset lock code is 1234 or the last four digits of your phone number. If you
enter an incorrect lock code five times in a row, your device will prompt you for
the lock code.

If you enter the wrong lock code 5 times in succession, you will not be able to enter
a code for 5 minutes, even if you power off the device between incorrect entries.

1. At the start screen, select Menu > Settings > Security settings > Change lock code.

2. Enter the new lock code (must be 4 characters in length), re-enter the new
lock code for verification, and select OK.

3. Reenter the new lock code for verification, and select OK.

When you change your lock code, make sure you store it in a safe place, away
from your device. Avoid entering access codes similar to emergency numbers to
prevent accidental emergency calls.

Call restrictions

Call restrictions is a network service. See "Network Services," p. 5.
If your wireless service provider supports this feature, you can restrict the calls your

device makes and receives. When calls are restricted, calls still may be possible to
the official emergency number programmed into your device. Contact your service
provider for the restriction password.

1. At the start screen, select Menu > Settings > Security settings > Call restrictions.

2. Enter the lock code, and select OK. See "Change lock code," p. 63.

63

Settings

3. Select the types of calls you wish to restrict:

Restrict outgoing calls—Calls cannot be made.
Restrict incoming calls—Calls cannot be received.

4. Select an option: Select, Add restriction.

Voice privacy

Voice privacy is a network service. See "Network Services," p. 5. If your wireless
service provider supports this feature, the voice privacy feature protects the
privacy of your current phone conversation from other callers placing phone calls
on your same network. At the start screen, select Menu > Settings > Security

settings > Voice privacy > On or Off.

■ Application settings

The application setting menu changes game and application settings.
In the standby mode, select Menu > Settings > App. settings one of the following:

Application sounds—Select On or Off.
Application lights—Select App. defined or Default.
Application shakes—Select On or Off.

■ Network

The menu options you see in your device are based on your service provider’s
network. The network determines which options actually appear in the device
menu. Check with your service provider for more information.

The Network menu allows you to customize the way your device chooses a network
in which to operate while you are within or outside of your primary or home system.
Your device is set to search for the most cost-effective network. If your device
cannot find a preferred network, it selects a network automatically based on the
option you choose in the Network menu.

Roaming options

You can set your device to roam or search for another network when you are not
in your home area.

1. At the start screen, select Menu > Settings > Network > Roaming options.

64

Settings

2. Select one of the following options:

Home only—You can make and receive calls in your home area only.
Automatic—The device automatically searches for service in another digital

network. If one is not found, the device uses analog service. The roaming rate
applies when not in the home service area.

3. Select OK, if necessary, to confirm the activation.

Mode

You can choose whether your device uses digital or analog service.

1. At the start screen, select Menu > Settings > Network > Mode.

2. Select one of the following service options:

Digital preferred—The device works in digital mode but will also work in

analog mode when digital mode is unavailable.

Digital only—The device only works in digital mode.
Analog only—The device only works in analog mode.

■ Network services

The following features are network services. See "Network Services," p. 5.

Store a feature code

1. At the start screen, select Menu > Settings > Network services > Network

feature setting.

2. Enter the feature code from your service provider (for example, *633), and
select OK.

3. Select the type of service that matches the feature code you entered
(for example, Call forwarding).

The activated feature code is now stored in your device, and you are returned
to the Feature code: field. Continue entering other feature codes (for example,
*633), or press the end key to return to the start screen. Once you enter a
network feature code successfully the feature becomes visible in the Network

services menu.

Call forwarding

Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a network service and may not work the same in all networks,
so contact your wireless provider for availability.

65

Settings

Activate

All options listed may not appear in the display. Contact your wireless provider
for more information.

1. At the start screen, select Menu > Settings > Network services > Call forwarding.

2. Select one of the following options:

Forward all calls—Forward all calls to the number you specify.
Forward if busy—Forward incoming calls when you are in a call.
Forward if not answered—Forward incoming calls to another number if you

are unable to answer. You can set a delay before forwarding takes place.

Forward if out of reach—Forward incoming calls when your device is off.
Cancel all call forwarding—Cancel any call forwarding options you have set.

3. Select Activate.

4. Select the destination to which your calls will be forwarded.

5. Enter the number to which your calls, data, or other information will be
forwarded, and select OK.

Cancel

At the start screen, select Menu > Settings > Network services > Call forwarding >

Cancel all call forwarding. Cancel all call forwarding may affect your ability to

receive voice mail messages. Contact your wireless provider for specific details.

Call waiting

If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can then accept, reject, or ignore
the incoming call.

1. At the start screen, select Menu > Settings > Network services > Call

waiting > Activate or Cancel.

2. During a call, select Answer or press the call key to answer the waiting call.
The first call is put on hold.

3. Press the end key to end the active call.

Send own caller ID when calling

If your wireless service provider supports this feature, then you can allow or
prevent your number from appearing on the receiving caller ID.

At the start screen, select Menu > Settings > Network services > Send my caller

ID >Yes or No.

66

Settings

View your own phone number

At the start screen, select Menu > Settings > Network services > My number selection.

■ Restore factory settings

You can reset some of the menu settings to their original values. Data that you
have entered or downloaded is not deleted, for example, entries in your contacts
list are not affected.

1. At the start screen, select Menu > Settings > Restore factory settings.

2. Enter the lock code, and select OK. See "Security settings," p. 62.

■ Infrared

You can set up the device to receive data through its IR port. To use an IR connection,
transmission and reception must be to or from an IR compatible phone or device. You
can send or receive data such as business cards, graphics, images, sound clips, music
files, videos, and calendar notes to or from a compatible phone or data device (such
as a computer) using the IR port of your device.

Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.

Send and receive data

1. Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.

The preferable distance between the two devices in an IR connection is from
3 inches to 3 feet.

2. Activate IR in your device by selecting Menu > Settings > Infrared.

3. The user of the other device should activate IR as well.

If data transfer is not started within two minutes after the activation of the IR
port, the connection is cancelled and must be restarted.

Connection indicator

• When shows continuously, the IR connection is activated and your
device is ready to send or receive data using its IR port.

• When blinks, your device is either trying to connect to the other device
or a connection has been lost.

67

Settings

Send a business card

1. At the start screen, select Menu > Settings > Infrared.

2. Highlight the entry from the contacts list that you wish to send.

3. Select Details > Options > Send bus. card > Via infrared > Primary number to
send primary number only or All details to send all contact information for
the contact.

4. Align the IR port to the other activated device IR port. Select OK and your
device will start sending the business card with IR.

Receive a business card

1. At the start screen, select Menu > Settings > Infrared > Select. Infrared

reception activated displays.

2. Align the IR port with the activated device port that is sending the business card.

3. Select Show > Save to save the business card in phone book memory, or select

Exit > OK to discard the business card.

68

Organizer

11. Organizer

Your device contains features to help organize your everyday life,
including an alarm clock, calendar, calculator, countdown timer, and stopwatch.

■ Alarm clock

If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the device for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless phone
use may cause interference or danger.

Set or change an alarm setting

The alarm clock is based on the device clock. It sounds an alert any time you
specify and even works if the device is turned off.

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm time > On.

2. Enter the time for the alarm in hh:mm format, and select OK.

3. Select am or pm (if 12-hour format is selected). Alarm on appears briefly in
the display and appears on the start screen.

Repeat alarm

You can set the alarm to repeat. At the start screen, select Menu > Organizer >

Alarm clock > Repeat alarm.

Set the alarm tone

You can set which tone is played when the alarm sounds.

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm tone.

2. Select Standard, Radio, Ringing tone, Open Gallery or Tone downloads to
choose the tone you want to use.

If you set your alarm to Radio, use an accessory that supports FM Stereo.

Alarm conditions

When the alarm sounds, your device beeps, vibrates (if vibrating alert is on for
currently active profile), and the display lights up.

With the device on, select OK to shut the alarm off, or select Snooze. The alarm
stops for 10 minutes and Snooze on appears in the display.

If you do not press a key, the alarms stops (snoozes) for 10 minutes, then
sounds again.

69

Organizer

If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the device for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless device
use may cause interference or danger.

Turn an alarm off

At the start screen, select Menu > Organizer > Alarm clock > Alarm time > Off.

■ Calendar

The calendar keeps track of reminders, calls you need to make, meetings, and
birthdays. It can even sound an alarm for any of these events.

Monthly view provides an overview of the selected month and weeks. It also allows
you to jump to a specific date. Any days or dates that appear in bold font contain
calendar notes such as a meeting or reminder.

Open

At the start screen, press the joystick right or select Menu > Organizer > Calendar.
You can move the cursor in some calendar views by using the joystick.

Go to a date

1. At the start screen, select Menu > Organizer > Calendar > Options > Go to date.

2. Enter the date (for example, mm/dd/yyyy), and select OK.

Note a specific date

You can apply five types of notes to your calendar. Your device asks for further
information depending on which note you choose. You also have the option to
set an alarm for any meeting, call, birthday, memo, or reminder that you create.

1. Go to the date for which you want to set a reminder. See "Go to a date," p. 70.

2. From the monthly view (with the go-to date highlighted), select Options >

Make a note.

3. Select one of the following note types and proceed accordingly:

Meeting—Enter a subject, location, and a start or end time.
Call—Enter a phone number, a name and the time.
Birthday—Enter the person’s name and year of birth.
Memo—Enter a subject and an end date.
Reminder—Enter the subject you wish to be reminded about. You are given

the option to set an alarm.

4. Enter your note and select Options > Save.

70

Organizer

View notes (day view)

After you have created calendar notes, you can view them.

1. At the start screen, select Menu > Organizer > Calendar.

2. Scroll to the date containing the note, that appears in bold type and select View.

Options while viewing a list of notes in day view

1. Select Options while viewing a day’s note to display the following:
The options listed below are available either while viewing the body of a note

or viewing the header of a note.

Make a note—Create a new note for the selected date.
Delete—Delete the note.
Edit—Edit the note.
Move—Move the note to another date on your calendar.
Repeat—Set the note to recur on a regular basis (daily, weekly, biweekly,

monthly, and yearly).

Go to date—Jump to another date on your calendar.
Go to today—Jump to the current date on your calendar.
Send note—Send the note to another device as a text message or in calendar-

to-calendar (vCal) format by way of multimedia messages, SMS, or IR.

Copy—Copy the note, which you can then paste to another date.
Settings—Set the date and time, date and time format, the day each week

starts and whether you want your notes to auto-delete after a specified time.

Go to to-do list—Jump to the to-do list on your calendar.

2. Select an option to activate it or enter its submenu.

Send a note

1. At the start screen, select Menu > Organizer > Calendar.

2. Scroll to the date containing the note you wish to send, which appears in bold
type, and select View.

3. Scroll to the note you wish to send, and select Options > Send note > Via

calendar, Via multimedia (see "Multimedia messages," p. 27), Via text
message, or Via infrared (see "Receive a business card," p. 68).

4. If you selected Via calendar, enter the number for the recipient, or select

Search to retrieve a number from the contacts list, and select OK.

71

Organizer

5. If you selected Via text message, the note appears as a text message in
the display.

• Select Send > Send to number, Send to e-mail, Send to many or Send to distrib.

list. Highlight the contact you wish to send your note to and select Send.

• Enter the number for the recipient, or select Search to retrieve a number

from the contacts list, and select Send.

Receive notes

When you receive a calendar note in calendar-to-calendar (vCal) format, your
device displays Calendar note received.

• To view calendar notes, select Show and, if necessary, scroll to view the
entire message.

• To save calendar notes after viewing, select Options > Save.

• To discard calendar notes after viewing, select Options > Discard or select Exit.
When you receive a calendar note or text message, a message notification

appears on the start screen. You can save the note in your calendar and set an
alarm for any date and time.

■ Notes

You can write and save information in Notes, and send notes via multimedia, text
message, or infrared. From the start screen, select Menu > Organizer > Notes. If
there are no notes created, select Add note, create your note and select Save
when done. If notes have already been created, highlight the note you wish to use
and select View to read, or select Options to perform one of the following:

Make a note—Create additional notes.
Delete—Discard a note.
Edit—Change or add information to a note.
Send note—Send a note Via multimedia, Via text message, or Via infrared.
Delete all notes—Delete all notes created.

■ To-do list

Use the to-do list feature to keep track of your tasks. You can save a note for a task,
select a priority level for the note and mark it as done when you have completed
it. You can sort the notes by priority or by date.

72

Organizer

Add a To-do note

1. From the start screen, select Menu > Organizer > To-do list.

2. If there are no notes, select Add note.

3. Enter the subject of the to-do note, and select Save.

4. Select either High, Medium, or Low priority. The to-do note is saved. The
device automatically sets the deadline.

View a To-do note

1. From the start screen, select Menu > Organizer > To-do list.

2. Highlight a to-do note, and select Options to select from the following:

Add—Add another note (available only in header view).
Delete—Delete the note.
Mark note as done—Mark a note or task as complete; no more reminders

will follow.

Sort by deadline—Sort the notes according to their deadline.
Send—Send the note to another device using IR, as a text or multimedia

message, or as a calendar note to another compatible device.

Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do note to a date on your calendar.
Delete all notes—Delete all the to-do notes in the list (available only in

header view).

3. View the to-do note and select Edit to edit the note or Options to select from
the following:

Deadline—Set a deadline for the note (available only in body view).
Mark note as done—Mark a note or task as complete; no more reminders

will follow.

Delete—Delete the note.
Edit priority—Change the priority to high, medium, or low (available only in

body view).

Send—Send the note to another device using IR, as a text or multimedia

message, or as a calendar note to another compatible device.

Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do note to a date on your calendar.

73

Organizer

■ Calculator

The calculator in your device adds, subtracts, multiplies, divides, calculates the
square and the square root, changes the sign of the number entered, and
converts currency values.

Note: This calculator has a limited accuracy and is designed for
simple calculations.

1. At the start screen, select Menu > Organizer > Calculator.

2. Enter the first number in the calculation. Press # for a decimal point if necessary.

To perform a square or square root calculation, select Options > Square or

Square root.

To cycle through the add (+), subtract (-), multiply (*), and divide (/) characters,
press *. Pause briefly to select the displayed character.

To change the sign, select Options > Change sign, or scroll up or down.

3. Enter the second number in your calculation.

4. Select Equals if calculation is complete or Options if more functions are required.

Currency converter

You can convert foreign currency to domestic, or vice versa, directly from the
start screen or from the Calculator menu.

Note: When you change base currency, you must key in the new rates
because all previously set exchange rates are set to zero.

1. At the start screen, select Menu > Organizer > Calculator > Options >

Exchange rate > Foreign units in home units or Home units in foreign units.
Foreign units in home units—The number of home units it takes to make one

unit of foreign currency.

Home units in foreign units—The number of foreign units it takes to make one

unit of your home currency.

2. Enter the exchange rate (press # to insert a decimal), and select OK.

3. Select Back to return to Calculator screen and enter currency amount to convert.

4. Select Options > To home or To foreign.

To home—converts foreign currency to domestic currency.
To foreign—converts domestic currency to foreign currency.

5. If you haven’t already entered an exchange rate, the device will prompt you
to enter it now. Select OK. You can edit the exchange rate at any time.

74

Organizer

■ Countdown timer

You can enter a specified time (up to 99 hours and 59 minutes). When the time
runs out, your device sounds an alarm.

Note: The countdown timer only works when the device is on. Once you
turn off your device, the timer is no longer active.

Set the countdown timer

1. At the start screen, select Menu > Organizer > Countdown timer.

2. Enter the time (in hh:mm format), and select OK.

3. Enter a note for the timer, and select OK.
The icon appears on the start screen when the countdown timer is set. When

the time runs out, your device sounds an alarm, displays the timer note, and
flashes its lights.

Press any key during the alarm to stop the alarm. After 3 minutes the timer alert
expires automatically.

Change the time

After you have set the timer, you can change the time.

1. At the start screen, select Menu > Organizer > Countdown timer > Change time.

2. Enter the new time, and select OK.

3. Leave the note as it was, or enter a new note, and select OK.

Stop the timer before the alarm sounds

After you have set the timer, you can stop the timer. At the start screen, select

Menu > Organizer > Countdown timer > Stop timer.

■ Stopwatch

Your device has a stopwatch that can be used to track time. The stopwatch displays
time in hours, minutes, seconds and fractions of a second in hh:mm:ss:s format.

Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.

Measure time

1. At the start screen, select Menu > Organizer > Stopwatch > Split timing or

Lap timing > Start. The running time displays.

75

Organizer

Split timing—You can use the split time function for such things as a long

distance race when you need to pace yourself. Select Split to note the lapsed
time. The timer continues to run and the split time appears below the running
time. Each time you select Split, the new measured time appears at the
beginning of the list.

Lap timing—You can use the lap time function when you want to track how

long it takes to complete each cycle or lap. Select Lap to note the lap time.
The clock stops, then starts immediately from zero. The lap time appears
below the running time. Each time you select Lap, the new measured time
appears at the beginning of the list.

2. Select Stop to end the timing and display the total time or select Stop >

Options > Start or Reset to continue or reset timing.

Save, view or delete lap and split times

• To save a time while the clock is running select Stop > Save, enter a name for
the measurement, and select OK. If you do not enter a name, the total time is
used as the default title for the lap or split time.

• To view a saved time, from the start screen, select Menu > Organizer >

Stopwatch > Show last time or View times.

• To delete a saved time, from Stopwatch, select View times > enter the time to
delete > Delete > Yes or select Delete times > One by one or Delete all.

Operation note

If you press the end key and return to the start screen, the clock continues to run
in the background and the icon appears in the upper left corner of the screen.

To return to the stopwatch screens, at the start screen, select Menu > Organizer >

Stopwatch > Continue. To stop the clock, select Stop.

Options

You can choose the following options when using the stopwatch:

Continue—Appears when the stopwatch is working in the background.
Show last time—Appears when you have saved a split or lap time. Displays the

last time saved.

Split timing—Asks if you want to discontinue previous timing.
Lap timing—Asks if you want to discontinue previous timing.
View times—Allows you to browse the saved times.
Delete times—Allows you to delete any saved times. You can delete the saved

times one by one or all at once.

76

Mobile Web

12. Mobile Web

Minibrowser is a network service. See "Network Services," p. 5.
Your device has a built-in browser you can use to connect to selected services

on the mobile internet. If your wireless service provider supports this feature,
then you can view weather reports, check news or flight times, view financial
information, and much more. The Web browser on your device can display
WAP-based content.

Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
internet site.

The security icon does not indicate that the data transmission between the gateway
and the content server (or place where the requested resource is stored) is secure.
The service provider secures the data transmission between the gateway and the
content server.

■ Mobile internet access

Because mobile Internet content is designed to be viewed from your device, your
wireless provider is now your mobile Internet service provider as well.

It is likely that your wireless provider has created a home page and set up your
browser to go to this page when you log on to the mobile Internet. Once at your
service provider’s home page, you may find links to a number of other sites.

It should not be necessary to manually configure the browser on your device.
Normally this is done by your wireless provider once you have subscribed to the
feature. Contact your wireless provider if you have problems using the browser.

■ Sign on to the mobile internet

At the start screen, select Menu > Minibrowser > Connect or the operator
provided menu item.

After a brief pause, your device attempts to connect to your wireless provider’s home
page. If you receive an error message, your device may not be set up for browsing.
Contact your wireless provider to make sure that your device is configured properly.

■ Navigate the mobile Internet

Since your device screen is much smaller than a computer screen, mobile Internet
content is displayed differently than you may be accustomed to seeing. This section
contains guidelines for using the keys to navigate a WAP site.

77

Mobile Web

Phone keys

• Press the Power key to display the Minibrowser home screen.

• Scroll up or down to browse the WAP site.

• Select an item.

• To enter letters and numbers, press a key from 0–9.

• To enter special characters, press *.

Receive a call while online

Depending on your wireless service provider, you may still be able to receive a
voice call while using the WAP browser.

• To answer the incoming call, press the call key.

• To reject the incoming call, press the end key.

After you end your voice call, the mobile Internet connection automatically resumes.

Note: If your wireless service provider does not support incoming calls
while browsing, then the incoming calls are automatically diverted to
voice mail.

Make an emergency call while online

You can end your data connection then make an emergency call.

1. To close your mobile Internet connection, press the end key.

2. Press the end key as many times as needed to clear the display and ready the
device for calls.

3. Enter the emergency number for your present location (for example, 911).
Emergency numbers vary by location.

4. Press the call key.

Clear the cache and disconnect

A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed
are stored in the cache. To empty the cache while in the browser menu, select
Navigate > Advanced > Clear > Cache from the home page. You can also clear
the cache by pressing and holding the Power key to power off your device.

To close your mobile internet connection while browsing, press the end key.

78

Extras

13. Extras

Challenge yourself or a friend to one of the fun games in your device.
Some menus listed are network services. Contact your wireless provider for more
information. When you download games or applications, they may be saved in
either the Games or the Collection folders.

■ Games

At the start screen, select Menu > Extras > Games to display the games on
your device.

■ Collections

Collections is a network service. See ’"Network Services," p. 5. If your wireless service
provider supports this feature, you will find useful applications pre-installed on your
device. Also, you can manage and download new Java applications that may be
offered by your wireless provider.

An application may require a few seconds to load. When you open an application,
wait for the launch screen to disappear. At that point, the application is ready.

1. At the start screen, select Menu > Extras > Collection.

2. Select an application: Converter, Translator, or World Clock.

Note: Only install applications from sources that offer adequate
protection against harmful software.

■ Memory

You can view the size of memory available for games or application installations.
At the start screen, select Menu > Extras > Memory.

Note: Only install applications from sources that offer adequate
protection against harmful software.

79

PC Connectivity

14. PC Connectivity

■ USB data transfer

You can transfer data such as music, photos, and videos from your device to a
compatible PC, or from a compatible PC to your device using a DKU-2 USB data
cable. The cable is connected to your device correctly when the arrowhead points
toward the display screen. Disconnect the USB data cable from the device to
make a call.

Use the Nokia Audio Manager software to handle your music files and transfer
them from the PC to the memory card in your device. See "Nokia PC Suite," p. 81.

Transfer files using Windows Explorer

After you have installed the Nokia Audio Manager, it is possible to use Windows
Explorer to transfer music, photo, and video files to your device and from your
device to your PC.

1. Connect your PC and your device with a DKU-2 USB cable. Data enhancement

connected displays on your device.

2. Open Windows Explorer. Your device will appear as a local drive (named by
Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i), and with a drive
letter assigned to it.

3. Click on the folders to display a window that shows the contents of the folder
on the device memory card.

4. Open a second instance of Windows Explorer and display the contents of the
folder on your PC where you have MP3 files, photo files, or video files stored.

5. Select the files on your PC that you wish to transfer to the device.

6. Drag and drop the files from the second window into the first window and
place them in a folder.

7. The files are transferred to the device and can be played by the Music player,
or accessed by the Media player.

If you selected files that require more memory than the device memory has, an
error note displays. Deselect some of your files until the selections fit the memory.

8. Disconnect the USB cable by double-clicking the green arrow on the taskbar
at the bottom of your PC screen. A window pops up that shows Unplug or
Eject Hardware.

80

PC Connectivity

9. Click on USB device in the hardware devices window. A popup window shows

Stop a Hardware device.

10. Highlight USB device and click OK. The popup window Safe to Remove

Hardware is shown with the message The ‘USB Device’ device can now be
safely removed from the system. Select OK.

Important: To ensure that all memory card operations are completed in

a controlled way, do not unplug the connectivity cable until Windows
notifies you that it is safe to do so. Uncontrolled completion of the memory
card operations may cause the memory card and the information stored
on it to become corrupted. A corrupted memory card may have to be
formatted before it can be used again. When a memory card is formatted,
all information on the card is permanently lost.

■ Nokia PC Suite

Nokia PC Suite software is available for the Nokia 6235, Nokia 6235i, Nokia 6236,
and Nokia 6236i phones. Nokia PC Suite is a collection of powerful tools that you
can use to manage your device features and data. Each component is a separate
program that includes online helps. Nokia PC Suite software, installation instructions,
and other documentation, which are provided free of charge and can be downloaded
from the software downloads of the Nokia Web site: www.nokiausa.com/pcsuite

.

Some of the features in your device require network support. Contact your service
provider for availability and configuration instructions.

• Nokia Application Installer installs Symbian and Java™ applications from a

compatible PC to a compatible device.

• Nokia Audio Manager creates and organizes digital music files on a compatible

PC and transfers them to a compatible mobile device.

• Nokia Connection Manager activates the connection types between a

compatible device and a compatible PC when using Nokia PC Suite applications.

• Nokia Contacts Editor edits the contacts of a compatible device from your PC.

• Nokia Content Copier copies information between two compatible Nokia

devices and backs up information from a compatible Nokia device to a
compatible PC.

• Nokia Image Converter modifies images and transfers them to a compatible

mobile device as wallpapers, portrait images, and MMS pictures.

• Nokia Multimedia Player plays MMS messages and audio and video files and

creates playlists of your favorite multimedia files.

81

PC Connectivity

• Nokia PC Sync synchronizes contacts, calendar, notes, and to-do items
between a compatible device and a compatible PC personal Information
Manager (PIM).

• Nokia Phone Browser uses your compatible PC to browse your compatible
device messages, contacts, images, videos and audio files; to copy and move
files or delete them from the phone’s memory; and to transfer files between
the device and PC.

• Nokia Sound Converter converts General MIDI ringing tones into Scalable
Polyphony MIDI tones for a compatible device.

• Nokia Text Message Editor sends and manages text messages from a
compatible PC.

• Nokia Modem Options sets options for the data calls you make.

Copyright protection may prevent some images, ring tones, and other content
from being copied, modified, transferred or forwarded.

82

Enhancements

15. Enhancements

Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from ACP-7 or ACP-12.

Warning: Use only batteries, chargers and
enhancements approved by Nokia for use with this particular model. The
use of any other types may invalidate any approval or warranty, and may
be dangerous. For availability of approved enhancements, please check
with your dealer.

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement,
grasp and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.

• Installation of any complex car enhancements must be made by qualified
personnel only.

Power

• Standard 1070 mAh Li-Ion Battery (BL-6C, BL-5C)

• Standard Travel Charger (ACP-7)

• Travel Charger (ACP-12)

• Retractable Charger (AC-1)

Go to www.nokiausa.com/phones

for more information about enhancements.

83

Reference information

16. Reference information

■ Battery information

Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times but it will eventually
wear out. When the talk and standby times are noticeably shorter than normal,
buy a new battery. Use only Nokia approved batteries, and recharge your battery
only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not
leave the battery connected to a charger. Overcharging may shorten its lifetime.
If left unused, a fully charged battery will lose its charge over time. Temperature
extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.

Do not short-circuit the battery. Accidental short-circuitring can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuitring the terminals may damage the battery
or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 59°F and 77°F (15°C and 25°C). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local
regulations. Please recycle when possible. Do not dispose as household waste.

■ Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting an
original Nokia battery, purchase it from an authorized Nokia dealer, look for the
Nokia Original Enhancements logo on the packaging, and inspect the hologram
label using the following steps:

84

Reference information

Successful completion of the four steps is not a total assurance of the authenticity
of the battery. If you have any reason to believe that your battery is not an authentic
original Nokia battery, you should refrain from using it and take it to the nearest
authorized Nokia service point or dealer for assistance. Your authorized Nokia
service point or dealer will inspect the battery for authenticity. If authenticity
cannot be verified, return the battery to the place of purchase.

Authenticate hologram

1. When looking at the hologram label, you should
see the Nokia connecting hands symbol from one
angle and the Nokia Original Enhancements logo
when looking from another angle.

2. When you angle the hologram. to the left, right,
down, and up sides of the logo, you should see
1, 2, 3, and 4 dots on each side respectively.

3. Scratch the side of the label to reveal a 20-digit
code, for example, 12345678919876543210.
Turn the battery so that the numbers are facing
upwards. The 20-digit code reads starting from the
number at the top row followed by the bottomrow.

4. Confirm that the 20-digit code is valid by
following the instructions at

www.nokiausa.com/batterycheck

.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram label is an
authentic Nokia battery, please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries visit www.nokiausa.com/battery

.

85

Care and maintenance

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you protect your warranty coverage and
enjoy your device for many years.

• Keep the device and all of its parts and accessories out of the reach of
small children.

• Keep the device dry. Precipitation, humidity and all types of liquids or moisture
can contain minerals that will corrode electronic circuits. If your device does
get wet, remove the battery and allow the device to dry completely before
replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.

• Do not paint the device. Paint can clog the moving parts and prevent
proper operation.

• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).

• Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.

• Use chargers indoors.

All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest authorized
service facility for service.

86

Additional safety information

Additional safety information

■ Operating environment

Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.

Remember to follow any special regulations in force in any area and always switch
off your device when its use is prohibited or when it may cause interference or
danger. Use the device only in its normal operating positions. This device meets
RF exposure guidelines when used either in the normal use position against the ear
of when positioned at least 7/8 inch (2.2 cm) away from the body. When a carry
case, belt clip, or holder is used for body-worn operation, it should not contain metal
and should position the device at least 7/8 inch (2.2 cm) away from your body.

In order to transmit data files or messages, this device requires a quality connection
to the network. In some cases, transmission of data files or messages may be delayed
until such a connection is available. Ensure the above separation distance
instructions are followed until the transmission is completed.

■ Medical devices

Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices. Consult
a physician or the manufacturer of the medical device to determine if they are
adequately shielded from external RF energy or if you have any questions. Switch
off your device in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 in (15.3 cm)
be maintained between a wireless device or phone and a pacemaker to avoid
potential interference with the pacemaker. These recommendations are consistent
with the independent research by and recommendations of Wireless Technology
Research. To minimize the potential for interference, persons with pacemakers should

• Always keep the device more than 6 inches (15.3 cm) from their pacemaker
when the device is switched on

• Not carry the device in a breast pocket

• Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.

If you have any reason to suspect that interference is taking place, switch off
your device immediately.

87

Additional safety information

HEARING AIDS

Some digital wireless devices may interfere with some hearing aids. If interference
occurs, consult your service provider.

■ Vehicles

RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
that may apply to the device. Check regularly that all wireless device equipment in
your vehicle is mounted and operating properly. Do not store or carry flammable
liquids, gases, or explosive materials in the same compartment as the device, its
parts, or enhancements. For vehicles equipped with an air bag, remember that an
air bags inflate with great force. Do not place objects, including installed or portable
wireless equipment in the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates,
serious injury could result.

FCC regulations prohibit using your wireless device while in the air. The use of
wireless telephones in an aircraft may be dangerous to the operation of the aircraft,
disrupt the wireless telephone network, and may be illegal.

■ Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include areas
where you would normally be advised to turn off your vehicle engine. Sparks in
such areas could cause an explosion or fire resulting in bodily injury or even death.
Switch off the device at refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel depots, storage, and
distribution areas, chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), and areas
where the air contains chemicals or particles such as grain, dust or metal powders.

Failure to observe these instructions may lead to suspension or denial of telephone
services to the offender, legal action, or both.

88

Additional safety information

■ Emergency calls

Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.

To make an emergency call, make sure your device is properly charged before
attempting any emergency calls. If your battery becomes empty, you cannot
receive or make calls, including emergency calls and must wait a few minutes
after the charging begins to place your call.

1. If the device is not on, switch it on. Check for adequate signal strength. Some
networks may require that a valid UIM (CDMA SIM) card is properly inserted
in the device.

2. Press the end key as many times as needed to clear the display and ready the
device for calls.

3. Key in the official emergency number for your present location and press the
call key. Emergency numbers vary by location.

If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the device is in an offline or flight mode you
must change the profile to activate the device function before you can make an
emergency call. Consult this guide or your service provider. When making an
emergency call, give all the necessary information as accurately as possible. Your
wireless device may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.

89

Additional safety information

■ Certification Information (SAR)

THIS NOKIA RM-60 MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.

Your mobile device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission (FCC) of the U.S. Government. These
limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were
developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.

The exposure standards for wireless mobile devices employ a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6 watts/kilogram (W/kg).* Tests for SAR are conducted using standard operating
positions accepted by the RCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of an operating device can be
well below the maximum value. This is because the device is designed to operate
at multiple power levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower the
power output.

Before a device model is available for sale to the public, it must be tested and certified
to the FCC that it does not exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each model.

The highest SAR value reported to the FCC when tested for use at the ear is

1.24 W/kg, and when worn on the body, as described in this user guide, is

1.26 W/kg. (Body-worn measurements differ among phone models, depending
upon available enhancements and FCC requirements.)

While there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirement. The FCC has granted
an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information
on this model device is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid

after searching on FCC ID

QMNRM-60.

90

Additional safety information

For body-worn operations, this phone has been tested and meets the FCC RF
exposure guidelines for use with a carry case, belt clip or holder that contains no
metal and that positions the handset a minimum of 7/8 inch (2.2 cm) away from
the body. Use of other carry cases, belt clips or holders may not ensure compliance
with the FCC RF exposure guidelines. If you do not use a body-worn enhancement
and are not holding the phone at the ear, positions the handset a minimum of
7/8 inch (2.2 cm) away from your body when the phone is switched on.

*In the United States and Canada, the SAR limit for mobile phone used by the public
is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give additional protection for the
public and to account for any variations in measurements. SAR values may vary
depending on national reporting requirements and the network band. For SAR
information in other regions, please look under product information at

www.nokiausa.com

.

91

Additional safety information

■ Technical information

Type designation—RM-60
Dimensions—Width 42.3 mm; length 105.5 mm; depth 18 mm
Weight—98 g with BL-6C Li-Ion Battery
Volume—69 cu cm
Wireless networks—CDMA 800 MHz, CDMA 1900 MHz, and AMPS 800
Frequency range (Tx)—AMPS: 824.04-848.97 MHz, PCS: 1851.25-1908.75 MHz,

Cellular: 824.70-848.37 MHz
Frequency range (Rx)—AMPS: 869.04-893.97 MHz, PCS: 1931.25-1988.75 MHz,

Cellular: 869.70-893.37 MHz
GPS frequency—1575.42 MHz

■ Battery information

This section provides information about battery charging times with the Travel
Charger (ACP-12) and the Standard Travel Charger (ACP-7), talk-times, and
standby times. Be aware that the information in this section is subject to change.
For more information, contact your service provider.

Charging times

The following charging times are approximate with the BL-6C 1070 mAh
Li-Ion battery:

Travel Charger (ACP-12): Up to 1 hour 35 minutes
Standard Travel Charger (ACP-7): Up to 3 hours 45 minutes

Talk and standby times

Operation times are estimates only and depend on signal strength, phone use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.

Talk time: 3 to 3.5 hours (digital)
Standby time: 8 to 12 days

■ Patent information

Manufactured or sold under one or more of the following US patents:

5889770
6148209
6072787

5802465
5596571
6128322

5991627
5699482
4969192

5754976
5701392
5859843

6078570
5924026
6510148

6009328
5930233
5793744

6556824
6775548

92

Additional safety information

■ Nokia one-year limited warranty

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from
defects in material and workmanship that result in Product failure during normal
usage, according to the following terms and conditions:

1. The limited warranty for the Product extends for ONE (1) year beginning on
the date of the purchase of the Product. This one year period is extended by
each whole day that the Product is out of your possession for repair under
this warranty.

2. The limited warranty extends only to the original purchaser (“Consumer”) of
the Product and is not assignable or transferable to any subsequent
purchaser/end-user.

3. The limited warranty extends only to Consumers who purchase the Product in
the United States of America.

4. During the limited warranty period, Nokia will repair, or replace, at Nokia’s
sole option, any defective parts, or any parts that will not properly operate for
their intended use with new or refurbished replacement items if such repair
or replacement is needed because of product malfunction or failure during
normal usage. No charge will be made to the Consumer for any such parts.
Nokia will also pay for the labor charges incurred by Nokia in repairing or
replacing the defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including framing, and
any non-operative parts. Nokia’s limit of liability under the limited warranty
shall be the actual cash value of the Product at the time the Consumer
returns the Product for repair, determined by the price paid by the Consumer
for the Product less a reasonable amount for usage. Nokia shall not be liable
for any other losses or damages. These remedies are the Consumer’s exclusive
remedies for breach of warranty.

5. Upon request from Nokia, the Consumer must prove the date of the original
purchase of the Product by a dated bill of sale or dated itemized receipt.

6. The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to
the Consumer after the completion of service under this limited warranty.

7. The Consumer shall have no coverage or benefits under this limited warranty
if any of the following conditions are applicable:

93

Additional safety information

a) The Product has been subjected to abnormal use, abnormal conditions,

improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of Nokia, including damage caused by shipping.

b) The Product has been damaged from external causes such as collision with

an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake
or damage from exposure to weather conditions, an Act of God, or battery
leakage, theft, blown fuse, or improper use of any electrical source, damage
caused by computer or internet viruses, bugs, worms, Trojan Horses,
cancelbots or damage caused by the connection to other products not
recommended for interconnection by Nokia.

c) Nokia was not advised in writing by the Consumer of the alleged defect or

malfunction of the Product within fourteen (14) days after the expiration
of the applicable limited warranty period.

d) The Product serial number plate or the enhancement data code has been

removed, defaced or altered.

e) The defect or damage was caused by the defective function of the cellular

system or by inadequate signal reception by the external antenna, or viruses
or other software problems introduced into the Product.

8. Nokia does not warrant uninterrupted or error-free operation of the Product.
If a problem develops during the limited warranty period, the Consumer shall
take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of purchase for repair

or replacement processing.

b) If “a” is not convenient because of distance (more than 50 miles) or for

other good cause, the Consumer shall ship the Product prepaid and
insured to:
Nokia Inc., Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901

c) The Consumer shall include a return address, daytime phone number and/

or fax number, complete description of the problem, proof of purchase
and service agreement (if applicable). Expenses related to removing the
Product from an installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not covered by

this limited warranty. The Consumer will be responsible for any expenses
related to reinstallation of the Product.

94

Additional safety information

e) Nokia will repair the Product under the limited warranty within 30 days

after receipt of the Product. If Nokia cannot perform repairs covered under
this limited warranty within 30 days, or after a reasonable number of
attempts to repair the same defect, Nokia at its option, will provide a
replacement Product or refund the purchase price of the Product less a
reasonable amount for usage. In some states the Consumer may have the
right to a loaner if the repair of the Product takes more than ten (10) days.
Please contact the Customer Service Center at Nokia at the telephone
number listed at the end of this warranty if you need a loaner and the repair
of the Product has taken or is estimated to take more than ten (10) days.

f) If the Product is returned during the limited warranty period, but the

problem with the Product is not covered under the terms and conditions
of this limited warranty, the Consumer will be notified and given an
estimate of the charges the Consumer must pay to have the Product
repaired, with all shipping charges billed to the Consumer. If the estimate
is refused, the Product will be returned freight collect. If the Product is
returned after the expiration of the limited warranty period, Nokia’s normal
service policies shall apply and the Consumer will be responsible for all
shipping charges.

9. You (the Consumer) understand that the product may consist of refurbished
equipment that contains used components, some of which have been
reprocessed. The used components comply with Product performance and
reliability specifications.

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING
LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED
WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT
BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS,
LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF
USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL,
COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS
OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY,
RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM
BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT
TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW
OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR
DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF
USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.

95

Additional safety information

11. Some states do not allow limitation of how long an implied warranty lasts, so
the one year warranty limitation may not apply to you (the Consumer). Some
states do not allow the exclusion or limitation of incidental and consequential
damages, so certain of the above limitations or exclusions may not apply to you
(the Consumer). This limited warranty gives the Consumer specific legal rights
and the Consumer may also have other rights which vary from state to state.

12. Nokia neither assumes nor authorizes any authorized service center or any
other person or entity to assume for it any other obligation or liability beyond
that which is expressly provided for in this limited warranty including the
provider or seller of any extended warranty or service agreement.

13. This is the entire warranty between Nokia and the Consumer, and supersedes
all prior and contemporaneous agreements or understandings, oral or written,
relating to the Product, and no representation, promise or condition not
contained herein shall modify these terms.

14. This limited warranty allocates the risk of failure of the Product between the
Consumer and Nokia. The allocation is recognized by the Consumer and is
reflected in the purchase price.

15. Any action or lawsuit for breach of warranty must be commenced within
eighteen (18) months following purchase of the Product.

16. Questions concerning this limited warranty may be directed to:
Nokia Inc.
Attn: Customer Service
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: [phone]
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)

17. The limited warranty period for Nokia supplied attachments and accessories
is specifically defined within their own warranty cards and packaging.

96

Additional safety information

■ Appendix A Message from the CTIA
(Cellular Telecommunications & Internet Association)
to all users of mobile phones

© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.
1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.
Phone: [phone]

Safety is the most important call you will ever make.

A Guide to Safe and Responsible Wireless Phone Use

Tens of millions of people in the U.S. today take advantage of the unique combination
of convenience, safety and value delivered by the wireless telephone. Quite simply,
the wireless phone gives people the powerful ability to communicate by voice—
almost anywhere, anytime—with the boss, with a client, with the kids, with
emergency personnel or even with the police. Each year, Americans make billions
of calls from their wireless phones, and the numbers are rapidly growing. But an
important responsibility accompanies those benefits, one that every wireless
phone user must uphold. When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good judgment must be exercised
at all times while driving a motor vehicle—whether on the device or not.The basic
lessons are ones we all learned as teenagers. Driving requires alertness, caution
and courtesy. It requires a heavy dose of basic common sense—keep your head
up, keep your eyes on the road, check your mirrors frequently and watch out for
other drivers. It requires obeying all traffic signs and signals and staying within
the speed limit. It means using seatbelts and requiring other passengers to do the
same. But with wireless phone use, driving safely means a little more. This brochure
is a call to wireless phone users everywhere to make safety their first priority
when behind the wheel of a car. Wireless telecommunications is keeping us in touch,
simplifying our lives, protecting us in emergencies and providing opportunities to
help others in need. When it comes to the use of wireless phones, safety is your
most important call.

Wireless Phone Safety Tips

Below are safety tips to follow while driving and using a wireless phone which
should be easy to remember.

1. Get to know your wireless phone and its features such as speed dial and

redial. Carefully read your instruction manual and learn to take advantage of
valuable features most phones offer, including automatic redial and memory.
Also, work to memorize the device keypad so you can use the speed dial
function without taking your attention off the road.

97

Additional safety information

2. When available, use a hands-free device. A number of hands-free wireless phone
accessories are readily available today. Whether you choose an installed
mounted device for your wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.

3. Position your wireless phone within easy reach. Make sure you place your
wireless phone within easy reach and where you can grab it without removing
your eyes from the road. If you get an incoming call at an inconvenient time,
if possible, let your voice mail answer it for you.

4. Suspend conversations during hazardous driving conditions or situations. Let
the person you are speaking with know you are driving; if necessary, suspend
the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow
and ice can be hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.

5. Do not take notes or look up phone numbers while driving. If you are reading
an address book or business card, or writing a "to do" list while driving a car,
you are not watching where you are going. It’s common sense. Don’t get
caught in a dangerous situation because you are reading or writing and not
paying attention to the road or nearby vehicles.

6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan your calls before you begin
your trip or attempt to coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need to dial while
driving, follow this simple tip—dial only a few numbers, check the road and
your mirrors, then continue.

7. Do not engage in stressful or emotional conversations that may be distracting.
Stressful or emotional conversations and driving do not mix—they are distracting
and even dangerous when you are behind the wheel of a car. Make people you
are talking with aware you are driving and if necessary, suspend conversations
which have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Your wireless phone is one of the
greatest tools you can own to protect yourself and your family in dangerous
situations—with your phone at your side, help is only three numbers away.
Dial 9-1-1 or other local emergency number in the case of fire, traffic
accident, road hazard or medical emergency. Remember, it is a free call on
your wireless phone!

9. Use your wireless phone to help others in emergencies. Your wireless phone
provides you a perfect opportunity to be a "Good Samaritan" in your community.
If you see an auto accident, crime in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local emergency number, as you would
want others to do for you.

98

Additional safety information

10. Call roadside assistance or a special wireless nonemergency assistance number
when necessary. Certain situations you encounter while driving may require
attention, but are not urgent enough to merit a call for emergency services.
But you still can use your wireless phone to lend a hand. If you see a broken­down vehicle posing no serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency wireless number.

Careless, distracted individuals and people driving irresponsibly represent a hazard
to everyone on the road. Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted educational outreach to
inform wireless phone users of their responsibilities as safe drivers and good citizens.
As we approach a new century, more and more of us will take advantage of the
benefits of wireless telephones. And, as we take to the roads, we all have a
responsibility to drive safely.

The wireless industry reminds you to use your phone safely when driving.
For more information, please call 1-888-901-SAFE.

For updates:
http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85

99