Nokia 6234 User Manual

Nokia 6234 User Guide

9246861

Issue 1

DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-123 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/.

The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste.

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia, Visual Radio, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revize this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

9246861/ Issue 1

For your safety.................................................................................................................................... 12

General information ........................................................................................................................... 16

Access codes ......................................................................................................................................................................................... 16

Security code..................................................................................................................................................................................... 16

PIN codes............................................................................................................................................................................................ 16

PUK codes........................................................................................................................................................................................... 16

Barring password ............................................................................................................................................................................. 17

Configuration settings service......................................................................................................................................................... 17

Download content and applications.............................................................................................................................................. 17

Nokia support and contact information ....................................................................................................................................... 18

1. Get started ...................................................................................................................................... 19

Install the SIM card and the battery ............................................................................................................................................. 19

Install a memory card ........................................................................................................................................................................ 21

Charge the battery.............................................................................................................................................................................. 22

Switch the phone on and off ........................................................................................................................................................... 23

Set the time, time zone, and date............................................................................................................................................... 23

Plug and play service ...................................................................................................................................................................... 23

Normal operating position................................................................................................................................................................ 24

2. Your phone...................................................................................................................................... 25

Keys and parts ...................................................................................................................................................................................... 25

Standby mode....................................................................................................................................................................................... 26

Active standby .................................................................................................................................................................................. 27

Content items in the navigation mode .................................................................................................................................. 27

Standby mode shortcuts ................................................................................................................................................................ 28

Power saver ....................................................................................................................................................................................... 28

Indicators ........................................................................................................................................................................................... 28

Keypad lock (keyguard)...................................................................................................................................................................... 30

3. Call functions.................................................................................................................................. 31

Make a voice call................................................................................................................................................................................. 31

Speed dialing..................................................................................................................................................................................... 31

Enhanced voice dialing .................................................................................................................................................................. 32

Make a voice dialing call............................................................................................................................................................ 32

Answer or reject a voice call............................................................................................................................................................ 32

Call waiting ....................................................................................................................................................................................... 33

Options during a voice call............................................................................................................................................................... 33

Make a video call................................................................................................................................................................................. 33

Answer or reject a video call............................................................................................................................................................ 34

Options during a video call............................................................................................................................................................... 35

4. Write text........................................................................................................................................ 36

Settings .................................................................................................................................................................................................. 36

Predictive text input........................................................................................................................................................................... 36

Traditional text input ......................................................................................................................................................................... 37

5. Navigate the menus........................................................................................................................ 38

6. Media............................................................................................................................................... 39

Camera ................................................................................................................................................................................................... 39

Take a photo...................................................................................................................................................................................... 39

Record a video clip .......................................................................................................................................................................... 40

Camera settings................................................................................................................................................................................ 40

Media player ......................................................................................................................................................................................... 40

Progressive download ..................................................................................................................................................................... 40

Set up the phone for a streaming service................................................................................................................................. 41

Music player.......................................................................................................................................................................................... 41

Play the music tracks transferred to the phone...................................................................................................................... 41

Music player settings...................................................................................................................................................................... 42

Radio ....................................................................................................................................................................................................... 43

Save radio channels ........................................................................................................................................................................ 43

Listen to the radio ........................................................................................................................................................................... 43

Voice recorder ...................................................................................................................................................................................... 44

Record sound..................................................................................................................................................................................... 44

List of recordings ............................................................................................................................................................................. 45

Define a storage folder................................................................................................................................................................... 45

Equalizer ................................................................................................................................................................................................ 45

7. Web.................................................................................................................................................. 46

Basic steps to access and use services.......................................................................................................................................... 46

Set up browsing................................................................................................................................................................................... 46

Connect to a service ........................................................................................................................................................................... 47

Browse pages........................................................................................................................................................................................ 47

Browse with phone keys ................................................................................................................................................................ 48

Options while browsing ................................................................................................................................................................. 48

Direct calling..................................................................................................................................................................................... 48

Bookmarks ............................................................................................................................................................................................. 49

Receive a bookmark ........................................................................................................................................................................ 49

Appearance settings ........................................................................................................................................................................... 49

Security settings.................................................................................................................................................................................. 50

Cookies................................................................................................................................................................................................ 50

Scripts over secure connection .................................................................................................................................................... 50

Download settings .............................................................................................................................................................................. 51

Service inbox ........................................................................................................................................................................................ 51

Service inbox settings..................................................................................................................................................................... 51

Cache memory...................................................................................................................................................................................... 52

Browser security .................................................................................................................................................................................. 52

Security module ............................................................................................................................................................................... 52

Certificates......................................................................................................................................................................................... 53

Digital signature............................................................................................................................................................................... 53

8. Applications (Apps.) ....................................................................................................................... 55

Games..................................................................................................................................................................................................... 55

Launch a game ................................................................................................................................................................................. 55

Game downloads.............................................................................................................................................................................. 55

Game settings ................................................................................................................................................................................... 55

Collection............................................................................................................................................................................................... 55

Launch an application .................................................................................................................................................................... 55

Application options ......................................................................................................................................................................... 56

Download an application............................................................................................................................................................... 56

Presenter................................................................................................................................................................................................ 57

9. Push To Talk (PTT) .......................................................................................................................... 59

Connect to the PTT service ............................................................................................................................................................... 59

Make and receive a PTT call ............................................................................................................................................................. 60

Make a channel or a group call ................................................................................................................................................... 60

Make a one-to-one call ................................................................................................................................................................. 61

Make a PTT call to multiple recipients....................................................................................................................................... 61

Receive a PTT call............................................................................................................................................................................. 61

Callback requests................................................................................................................................................................................. 61

Send a callback request ................................................................................................................................................................. 62

Respond to a callback request ..................................................................................................................................................... 62

Add a one-to-one contact................................................................................................................................................................ 62

PTT channels ......................................................................................................................................................................................... 63

Add a channel ................................................................................................................................................................................... 63

Receive an invitation ...................................................................................................................................................................... 64

PTT settings ........................................................................................................................................................................................... 64

10.Messaging...................................................................................................................................... 66

Text messages (SMS).......................................................................................................................................................................... 66

Write and send SMS messages .................................................................................................................................................... 66

Read and reply to an SMS message ........................................................................................................................................... 67

SIM messages ....................................................................................................................................................................................... 67

Multimedia messages......................................................................................................................................................................... 68

Write and send a multimedia message ..................................................................................................................................... 68

Send a message................................................................................................................................................................................ 69

Cancel message sending ................................................................................................................................................................ 70

Read and reply to a multimedia message................................................................................................................................. 70

Memory full........................................................................................................................................................................................... 71

Folders .................................................................................................................................................................................................... 71

Flash messages..................................................................................................................................................................................... 71

Write a flash message .................................................................................................................................................................... 72

Receive a flash message ................................................................................................................................................................ 72

Audio messages.................................................................................................................................................................................... 72

Create an audio message............................................................................................................................................................... 72

Receive an audio message............................................................................................................................................................. 73

Email application................................................................................................................................................................................. 73

Settings Wizard ................................................................................................................................................................................ 73

Write and send an email................................................................................................................................................................ 74

Download email................................................................................................................................................................................ 74

Read and reply to email................................................................................................................................................................. 75

E-mail folders.................................................................................................................................................................................... 75

Spam filter ......................................................................................................................................................................................... 76

Voice messages .................................................................................................................................................................................... 76

Info messages....................................................................................................................................................................................... 76

Service commands .............................................................................................................................................................................. 76

Delete messages .................................................................................................................................................................................. 77

Message settings ................................................................................................................................................................................. 77

General................................................................................................................................................................................................ 77

Text message and SMS email ....................................................................................................................................................... 77

Multimedia message....................................................................................................................................................................... 78

Email.................................................................................................................................................................................................... 79

11.My Items........................................................................................................................................ 81

Format memory card .......................................................................................................................................................................... 81

12.Organizer ....................................................................................................................................... 82

Alarm clock ........................................................................................................................................................................................... 82

Stop the alarm.................................................................................................................................................................................. 82

Calendar................................................................................................................................................................................................. 82

Make a calendar note..................................................................................................................................................................... 83

Note alarm......................................................................................................................................................................................... 83

To-do list................................................................................................................................................................................................ 83

Notes....................................................................................................................................................................................................... 84

Calculator .............................................................................................................................................................................................. 84

Convert currency.............................................................................................................................................................................. 85

Countdown timer ................................................................................................................................................................................ 85

Stopwatch ............................................................................................................................................................................................. 85

13.Contacts......................................................................................................................................... 87

Search for a contact........................................................................................................................................................................... 87

Save names and phone numbers .................................................................................................................................................... 87

Save numbers and text items .......................................................................................................................................................... 87

Copy contacts....................................................................................................................................................................................... 88

Edit contact details............................................................................................................................................................................. 88

Delete contacts .................................................................................................................................................................................... 88

Business cards ...................................................................................................................................................................................... 89

Groups .................................................................................................................................................................................................... 89

Speed dials ............................................................................................................................................................................................ 90

Service and my numbers ................................................................................................................................................................... 90

14.Log.................................................................................................................................................. 91

15.Instant messages (IM)................................................................................................................... 92

Access the instant messaging menu .......................................................................................................................................... 92

Connect to instant messaging ..................................................................................................................................................... 93

Start an instant messaging conversation ................................................................................................................................. 93

Instant messaging invitation........................................................................................................................................................ 94

Read a received instant message ................................................................................................................................................ 95

Join an instant messaging conversation................................................................................................................................... 95

Edit your availability status .......................................................................................................................................................... 95

Contacts for instant messaging................................................................................................................................................... 96

Block and unblock messages ........................................................................................................................................................ 96

Groups................................................................................................................................................................................................. 96

16.Settings.......................................................................................................................................... 98

Profiles.................................................................................................................................................................................................... 98

Flight mode........................................................................................................................................................................................ 98

Themes.................................................................................................................................................................................................... 99

Tones ....................................................................................................................................................................................................... 99

Display .................................................................................................................................................................................................... 99

Standby mode ................................................................................................................................................................................... 99

Enable or disable active standby from idle........................................................................................................................... 99

Standby settings............................................................................................................................................................................. 100

Screen saver .................................................................................................................................................................................... 100

Power saver ..................................................................................................................................................................................... 101

Sleep mode ...................................................................................................................................................................................... 101

Font size ........................................................................................................................................................................................... 101

Time and date..................................................................................................................................................................................... 101

My shortcuts....................................................................................................................................................................................... 101

Left selection key ........................................................................................................................................................................... 102

Right selection key ........................................................................................................................................................................ 102

Navigation key................................................................................................................................................................................ 102

Enable active standby................................................................................................................................................................... 102

Voice commands ............................................................................................................................................................................ 103

Connectivity........................................................................................................................................................................................ 103

Bluetooth wireless technology................................................................................................................................................... 103

Set up a Bluetooth connection .................................................................................................................................................. 104

Bluetooth wireless connection................................................................................................................................................... 104

Bluetooth settings ......................................................................................................................................................................... 105

Infrared ............................................................................................................................................................................................. 105

Packet data...................................................................................................................................................................................... 106

Packet data connection................................................................................................................................................................ 106

Packet data settings...................................................................................................................................................................... 106

Data transfer ................................................................................................................................................................................... 107

Data transfer with a compatible device.................................................................................................................................. 107

Data transfer without SIM card................................................................................................................................................. 108

Synchronize from a compatible PC........................................................................................................................................... 108

Synchronize from a server........................................................................................................................................................... 108

USB data cable ............................................................................................................................................................................... 109

Call......................................................................................................................................................................................................... 109

Phone.................................................................................................................................................................................................... 110

Enhancements.................................................................................................................................................................................... 111

Configuration ..................................................................................................................................................................................... 111

Security ................................................................................................................................................................................................ 112

Digital rights management............................................................................................................................................................. 113

Restore factory settings .................................................................................................................................................................. 114

17.SIM Toolkit (STK)........................................................................................................................ 115

18.PC connectivity............................................................................................................................ 116

Nokia PC Suite.................................................................................................................................................................................... 116

EGPRS, HSCSD, CSD, and WCDMA ............................................................................................................................................... 116

Data communication applications ............................................................................................................................................... 116

19.Battery information .................................................................................................................... 118

Charging and discharging............................................................................................................................................................... 118

Nokia battery authentication guidelines.................................................................................................................................... 119

Care and maintenance...................................................................................................................... 121

Additional safety information......................................................................................................... 122

Index.................................................................................................................................................. 126

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900; GSM 1800 and1900; and WCDMA2100 networks. Contact your service provider for more information about networks.

When you use the features in this device, obey all laws and respect privacy and legitimate rights of others. When you take and use images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights

of others.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all languagedependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messaging (MMS), browsing, instant messaging, presence-enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.

■ Shared memory

The following features in this device may share memory: my items, contacts, text messages, multimedia messages, instant messages, e-mail, calendar, to-do notes, Java features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

games and applications, and note application. Use of one or more of these

■ Enhancements

A few practical rules about accessories and enhancements.

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.

• Installation of any complex car enhancements must be made by qualified personnel only.

General information

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is

12345. To change the code, and to set the phone to request the code, see Security p. 111.

If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for 5 minutes, and enter the code again.

PIN codes

The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See Security p. 111. The PIN code is usually supplied with the SIM card. Set the phone to request the PIN code each time the phone is switched on.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions.

The module PIN is required to access the information in the security module. See Security module p. 52. The module PIN is supplied with the SIM card if the SIM card has a security module in it.

The signing PIN is required for the digital signature. See Digital signature p. 53. The signing PIN is supplied with the SIM card if the SIM card has a security module in it.

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. If the codes are not supplied with the SIM card, contact your service provider for the codes.

Barring password

The barring password (4 digits) is required when you use the Call barring service. See Security p. 111. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider or network operator.

■ Configuration settings service

Before you use multimedia messaging, instant messaging and presence, push to talk, email, synchronization, streaming, and the browser, you must have the proper configuration settings on your phone. You may receive the settings directly as a configuration message, which you save to your phone. For more information on availability, contact your network operator, service provider, or nearest authorized Nokia dealer.

When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed.

To save the received settings, select Show > Save. If the phone requests Enter settings’ PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code, contact the service provider that supplies the settings.

If no settings are saved, these settings are saved and set as default configuration settings. Otherwise, the phone asks, Activate saved configuration settings?

To discard the received settings, select Show > Discard.

■ Download content and applications

You may be able to download content, such as themes, tones, and video clips, to the phone (network service). Select the download function (for example, in My Items). To access the download function, see the respective menu descriptions. For availability of different services, pricing, and tariffs, contact your service provider.

Important: Use only services that you trust and that offer adequate security and protection against harmful software.

■ Nokia support and contact information

Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.

On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia service center at www.nokia.com/repair.

1. Get started

■ Install the SIM card and the battery

Always switch the device off and disconnect the charger before removing the battery.

Keep all SIM cards out of the reach of small children.

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

This device is intended for use with the BP-6M-S battery.

The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.

1. With the back of the phone facing you, slide the back cover (1) to remove it from the phone (2).

2. To remove the battery, lift it as shown (3).

3. To release the SIM card holder, gently pull the locking clip of the card holder, and open it (4) Insert the SIM card into the SIM card holder (5). Make sure that the SIM card is properly inserted and that the gold-colored contact area on the card is facing downwards.

Close the SIM card holder (6), and press it until it snaps into position.

4. Replace the battery (7)

5. Place the back cover in the correct position (8).

6. Slide the back cover into place (9).

■ Install a memory card

The phone’s microSD card included with your phone contains preloaded ringing tones, themes, tones, and graphics. If you delete, reload, or replace this card, these functions and features

Use only compatible microSD cards with this device. Other memory cards, such as reduced size MMCs, do not fit in the memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device.

You can use a memory card to extend the memory of My Items. See My Items p. 80.

You can insert or change the memory card without switching the phone off.

may not function properly.

Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

To insert the memory card, open the memory card holder as shown (1). Place the memory card in the card holder (2). Make sure that the memory card is properly inserted—that it clicks into the holder—and that the gold-colored contact area on the card is facing upwards. Close the memory card holder.

You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in My

Items.

To format the memory card, see Format memory card p. 80.

■ Charge the battery

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-4, AC-1, AC-3, or DC-4 charger.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

1. Connect the charger to a wall outlet.

2. Connect the plug from the charger into the CA-44 charging adapter (not provided with the phone), and the adapter plug into the jack on the bottom of your phone.

If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

The charging time depends on the charger and the battery used. For example, charging a BP-6M Li-Ion battery with the AC-4 charger takes about 1 hour and 55 minutes while the phone is in the standby mode.

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or

danger.

Press and hold the power key as shown.

If the phone asks for a PIN or UPIN code, enter the code, and select OK.

You can switch on the phone in demo mode without a SIM card inserted. In this mode, all bearer-independent features are available, and you can make emergency calls.

Set the time, time zone, and date

Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See Time and date p. 100.

Plug and play service

When you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See

Connect to serv. support in Configuration p. 110 and Configuration settings service p. 17.

■ Normal operating position

Use the phone only in its normal operating position.

Your device has an internal antenna.

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.

2. Your phone

■ Keys and parts

• Power key (1)

• Earpiece (2)

• Left, middle, and right selection keys (3)

• End key (4)

• 4-way navigation key (5)

• Call key (6)

• Number keys (7)

• Push to talk key (8)

• Loudspeaker (9)

• Memory card slot (10)

• Charger connector (11)

• Enhancements connector (12)

• Volume keys (13)

• Infrared (IR) port (14)

• Camera lens (15)

• Camera key (16)

■ Standby mode

When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.

• 3G indicator (1)

• Signal strength of the cellular network (2)

• Battery charge level (3)

• Indicators (4)

• The name of the network or the operator logo (5)

• Clock (6)

• Display (7)

• The left selection key (8) is Go to or a shortcut to another function. See Left

selection key p. 101.

• The middle selection key (9) mode is Menu.

• The right selection key (10) may be Names to access the list of contacts in the Contacts menu, an operatorspecific name to access an operatorspecific Web site, or a shortcut to a function that you selected. See Right selection key p. 101.

Active standby

In the active standby mode, the phone can display separate content item windows, such as shortcuts (1), audio functions (2), the calendar (3), and a user note (4). To select whether active standby is shown, see

Active standby in Standby settings p. 99.

When active standby is idle, to access the menu structure, select Menu (5). To access the features in active standby, press the navigation key up or down.

To change the key to access the navigation mode, see Enabling active

standby in Standby settings p. 99. When the arrow indicators (6) are

shown, you can scroll the item left and right.

Content items in the navigation mode

Shortcut bar — To select a shortcut, scroll to the desired function, using

left/right navigation key, and select it.

To change or organize the shortcuts when in the navigation mode, select Options > Active standby > My active

standby > Options > Personalise > Options > Select links or Organise links.

Audio applications — To switch on the radio or the music player, scroll to and select it. To change a track in the

music player or a channel in the radio, scroll left or right. To start the radio channel search, scroll and hold left or right.

Calendar — To view today’s notes, select the desired one. To view the notes for the previous or next days, scroll

left or right.

My note — To enter a note, select the content window, write your note, and save it.

Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is

shown.

General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default

group name and closed user group index. The date is shown if the calendar is not selected as active standby content.

Standby mode shortcuts

• To access the list of dialed numbers, press the call key once. See Make a voice call p. 31.

• To call your voice mailbox (network service) when you have saved your voice mailbox number in the phone, press and hold 1.

• To access video mail numbers, press and hold 2.

• To connect to a browser service, press and hold 0.

• To set shortcut functions for the navigation key, see Navigation key in My shortcuts p. 100.

• To change the profile, briefly press the power key to open the list of profiles. Scroll to the desired profile, and select it.

Power saver

To set the power saving function On, see Power sa ver in Display p. 98.

Indicators

You have unread messages in the Inbox folder.

You have unsent, canceled, or failed messages in the Outbox folder.

The phone registered a missed call.

/ Your phone is connected to the instant messaging service, and the availability status is online or

offline.

You received one or several instant messages, and you are connected to the Instant messaging service.

The keypad is locked.

The phone does not ring for an incoming call or text message. See also Tones p. 98.

The alarm clock is set to On.

The countdown timer is running.

The stopwatch is running in the background.

/ The phone is registered to a GPRS, EGPRS, or WCDMA network.

/ A packet data connection is established.

/ The packet data connection is suspended (on hold), for example, if there is an incoming or outgoing

call during a packet data dial-up connection.

When the infrared connection is activated, the indicator is shown continuously.

A Bluetooth connection is active.

If you have two phone lines, the second phone line is selected.

All incoming calls are diverted to another number.

The loudspeaker is activated, or the music stand is connected to the phone.

Calls are limited to a closed user group.

The timed profile is selected.

, , , or

A headset, handsfree, loopset, or music stand enhancement is connected to the phone.

or A push to talk connection is active or suspended.

■ Keypad lock (keyguard)

To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad; or select Lock.

To unlock the keypad select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, select

Unlock, press *, and enter the security code.

To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks.

For Automatic keyguard and Security keyguard, see Phone p. 109.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.

3. Call functions

■ Make a voice call

1. Enter the phone number, including the area code.

For international calls, press * twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number.

2. To call the number, press the call key.

3. To end the call, or to cancel the call attempt, press the end key.

To search for a name or phone number that you have saved in Contacts, see Search for a contact p. 86. Press the call key to call the number.

To access the list of phone numbers you have most recently called or attempted to call, in the standby mode, press the call key once. To call the number, scroll to the number or name you want, and press the call key.

Speed dialing

Assign a phone number to one of the speed-dialing keys, 3 to 9. See Speed dials p. 89. Call the number in either of the following ways:

• Press the speed-dialing key, then the call key.

•If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Call p. 108.

Enhanced voice dialing

To make a phone call, select and hold Names, and say the name of the contact you wish to call. The phone will automatically associate a virtual voice tag with each contact in the phone memory.

Make a voice dialing call

If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing in GSM. In WCDMA it is possible to send voice and data simultaneously.

Voice commands are language-dependent. To set the language, see Voice playback language in Phone p. 109.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.

1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is displayed.

If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing.

2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.

Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice

commands in My shortcuts p. 100.

■ Answer or reject a voice call

To answer a call, press the call key.

To mute the ringing tone before you answer the call, select Silence.

To end the call or reject a call, press the end key.

Call waiting

During a call, to answer the waiting call, press the call key. The first call is put on hold. To end the active call, press the end key.

To activate the Call waiting function, see Call p. 108.

■ Options during a voice call

Many of the options that you use during a call are network services. For availability, contact your network operator or service provider.

Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker, or Handset.Network services options are Answer, Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:

Send DTMF — to send tone strings

Swap — to switch between the active call and the call on hold

Transfer — to connect a call on hold to an active call and disconnect yourself

Conference — to make a conference call that allows up to five persons to take part in a conference call

Private call — to discuss privately in a conference call

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

■ Make a video call

When you make a video call, you send a real-time video to the recipient of the call. The video image captured by the camera on the back of your phone is shown to the video call recipient. This phone does not have a front camera.

To be able to make a video call, you must have a USIM card and be connected in a WCDMA network. For availability of and subscription to video call services, contact your network operator or service provider. A video

call can only be made between two parties. The video call can be made to a compatible phone or an ISDN client. Video calls cannot be made while another voice, video, or data call is active.

1. To start a video call, enter the phone number in the standby mode, or select Contacts and a contact.

2. Press and hold the call key, or select Options > Video call. Starting a video call may take a while. Video call and an outgoing animation is shown. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead.

Tip: To increase or decrease the volume during a call, press the volume keys.

The video call is active when you can see two video images and hear the sound through the loudspeaker. The call recipient may deny the video sending, in which case you may see a still image or a grey background graphic. You will hear the sound.

3. To end the call, press the end key.

■ Answer or reject a video call

When a video call arrives, Video Call is displayed.

1. Press the call key to answer the video call. Allow video image to be sent to caller? is displayed.

If you select Yes, the image being captured by the camera in your phone is shown to the caller. If you select

No, or do nothing, video sending is not activated, and you hear a sound. A graphic is displayed on top of the

video, indicating that it is not sent. You can enable or disable video sending at any time during the video call.

2. To end the video call, press the end key.

Even when you deny video sending during a video call, the call is still charged as a video call. Check the pricing with your network operator or service provider.

■ Options during a video call

Select Options during a video call for the following options: Set contrast, Video motion, Switch to voice, End

call, Send DTMF, and Loudspeaker.

4. Write text

To enter text (for example, when writing messages), use traditional or predictive text input. To use traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress.

When you write text, or appears at the top left of the display, indicating predictive text input, and

appears, indicating traditional text input. , , or appears next to the text input indicator, indicating the character case. To change the character case, press #. indicates number mode. To change from the letter to number mode, press and hold #, and select Number mode.

■ Settings

To set the writing language while writing text, select Options > Writing language.

When writing text, select Options > Prediction .

To set predictive text input on or revert to traditional text input, select Prediction > On or Off.

To select the prediction type, select Prediction type > Normal or Word suggestions. If you select Normal, indicated with , the phone predicts the word on the basis of the characters you enter. If you select Word

suggestions, indicated with , the phone predicts and completes the word before you enter all the

characters.

Tip: To quickly set predictive text input on or off when writing text, press # twice, or select and hold

Options.

■ Predictive text input

Predictive text input allows you to write text quickly using the phone keypad and a built-in dictionary.

1. To start writing a word, use the 2 to 9 keys. Press each key only once for one letter. The phone displays * or

the letter if it separately has a meaning as a word. The entered letters are displayed underlined.

If you select Word suggestions as prediction type, the phone starts to predict the word you are writing. After you enter a few letters, and if these entered letters are not a word, the phone tries to predict longer words. Only the entered letters are displayed underlined.

To insert a special character, press and hold *, or select Options > Insert symbol. Scroll to a character, and select Use.

2. When you finish writing the word and it is correct, to confirm it, press 0 to add space.

If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want appears, select Use.

If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Complete the word (traditional text input is used), and select Save.

■ Traditional text input

Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters that are available depend on the selected writing language. See Settings p. 36.

If the next letter you want is located on the same key as the present one, wait until the cursor appears; or briefly press any of the navigation keys, and enter the letter.

The most common punctuation marks and special characters are available under the 1 key. For more characters, press *.

5. Navigate the menus

The phone offers you an extensive range of functions, that are grouped into menus.

1. To access the menu, select Menu.

To change the menu view, select Options > Main menu view > List, Grid, Grid with labels or Tab.

To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes.

2. Scroll through the menu, and select an option (for example, Settings).

3. If the selected menu contains further submenus, select the one that you want (for example, Call).

4. If the selected menu contains further submenus, repeat step 3.

5. Select the setting of your choice.

6. To return to the previous menu level, select Back. To exit the menu, select Exit.

The menus, submenus, and setting options are numbered. To access some of them, use their shortcut number.

To access the menu, select Menu. Enter quickly, within 2 seconds, the shortcut number of the menu function you want to access. To access the menu functions in menu level 1, enter 0 and 1.

6. Media

■ Camera

You can take photos or record video clips with the built-in 2 megapixel camera. The camera produces pictures in .jpg format and video clips in .3gp format, and you can digitally zoom up to eight times.

Take a photo

1. To open the camera viewfinder, select Menu > Media > Camera.

If Video is selected as the default mode, select Options > Still image.

To zoom in or out, press the volume key up or down, or the left/right navigation key.

To take up to four photos in quick succession, select Options > Img. sequence on. The higher the resolution, the fewer photos you can take sequentially.

2. To take a photo, press the camera key, or select Capture.

The phone saves the photo in My Items > Images unless you set the phone to use the memory card for saving the photos.

3. To take another photo, press the camera key after the photo saving indicator

stops moving. To send the photo as a multimedia message, select Options >

Send.

Tip: To activate the camera, press the camera key. To activate video, press and hold the camera key.

This device supports an image capture resolution of 1600 x 1200 pixels. The image resolution in these materials may appear different.

Record a video clip

Select Menu > Media > Camera > Options > Video > Record. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in My Items >

Video clips. To change the folder for saving the recordings, see Camera settings p. 40.

Camera settings

Select Menu > Media > Camera > Options > Settings. You can define Image quality, Image size, Video clip

quality, Video clip length, Camera sounds, Default title, Image and video storage, and Default mode. In Image and video storage you can select the folder or memory card to save your photos and video clips.

This device supports the following video sizes: SubQCIF, QCIF, CIF, and VGA.

■ Media player

With the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service).

Select Menu > Media > Media player > Open My Items, Bookmarks, Go to address, or Media downloads.

Progressive download

Progressive download allows you to watch a video while it is being downloaded and saved in the background. Playback starts immediately when enough data has been buffered.

Select Menu > Media > Media player > Open My Items, Bookmarks, Go to address, or Media downloads.

To learn more about accessing videos see Download content and applications p. 17.

Set up the phone for a streaming service

You may receive the configuration settings required for streaming as a configuration message from the network operator or service provider. See Configuration settings service p. 17. You can also enter the settings manually. See Configuration p. 110.

To activate the settings, do the following:

1. Select Menu > Media > Media player > Streaming settings > Configuration

2. Only the configurations that support streaming are shown. Select a service provider, Default, or Personal

configuration for streaming.

3. Select Account and a streaming service account contained in the active configuration settings.

■ Music player

Your phone includes a music player for listening to music tracks, recordings, or other .mp3, .mp4, or .aac format sound files that you have transferred to the phone with the Nokia Audio Manager application. .mp3 and .aac format files are stored in the memory card or in the My Items folders. Music files saved in the Music files folder and in another location, such as a folder of the memory card, are automatically detected and added to the default track list.

Play the music tracks transferred to the phone

1. Select Menu > Media > Music player. The details of the first track on the default track list are shown.

To use the graphical keys , , , or on the display, scroll left or right to the desired key, and select it.

2. To play a track, scroll to the track that you want, and select .

To adjust the volume level, use the volume keys on the side of the phone.

To skip to the beginning of the next track, select . To skip to the beginning of the previous track, select

twice.

To rewind the current track, select and hold . To fast forward the current track, select and hold . Release the key at the position you want.

3. To stop the playing, select .

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Music player settings

In the Music player menu, the following options may be available:

Play via bluetooth — to make a connection to an audio enhancement using a Bluetooth connection

Track list — to view all the tracks available on the track list. To play a track, scroll to the desired track, and select

Play.

Select Options > Refresh all tracks or Change track list to refresh the track list (for example, after adding new tracks to the list) or to change the track list that is shown when you open the Music player menu, if several track lists are available in the phone.

Play options > Random > On — to play the tracks in the track list in random order. Select Repeat > Current track or All tracks to play the current track or the entire track list repeatedly.

Media equaliser — to open the list of media equalizer sets. See Equalizer p. 45.

Loudspeaker or Headset — to listen to the music player through the loudspeaker or a compatible headset

connected to the phone

Tip: When using a headset, to skip to the next track, press the headset key.

Send — to send the selected file using MMS, Bluetooth wireless technology, or an infrared connection

Music downloads — to connect to a browser service related to the current track. This function is only available

when the address of the service is included in the track.

Memory status — to view the free and used memory capacity

■ Radio

The FM radio depends on an antenna other than the wireless device’s antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.

Select Menu > Media > Radio.

To use the graphical keys , , , or on the display, scroll left or right to the desired key, and select it.

Save radio channels

1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps,

briefly press or .

2. To save the channel to a memory location, 1 to 9, press and hold the corresponding number key. To save the

channel to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.

3. Enter the name of the channel, and select OK.

Listen to the radio

Select Menu > Media > Radio. To scroll to the desired channel, select or , or press the headset key. To select a radio channel location, briefly press the corresponding number keys. To adjust the volume, press the volume keys.

Select from the following options:

Switch off — to turn off the radio

Save station — to enter a channel name and save the new channel

Visual Radio — to set whether the Visual Radio application is used. Some radio channels may send text or

graphical information that you can view using the Visual Radio application.

Note: This feature may not be available in your product due to your subscription (network service).

Visual Radio settings — to select the options for Visual Radio. To set whether the Visual Radio

application starts automatically when you turn on the radio, select Enable visual service > Automatically.

Stations — to select the list of saved channels. To delete or rename a channel, scroll to the desired channel, and

select Options > Delete station or Rename.

Mono output or Stereo output — to listen to the radio in monophonic sound or in stereo

Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset. Keep the headset connected

to the phone. The lead of the headset functions as the radio antenna.

Set frequency — to enter the frequency of the desired radio channel

You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.

When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio.

■ Voice recorder

You can record pieces of speech, sound, or an active call, and save them in My Items or a memory card. This is useful when recording a name and phone number to write down later.

The recorder cannot be used when a data call or GPRS connection is active.

Record sound

1. Select Menu > Media > Voice recorder.

To use the graphical keys , , or on the display, scroll left or right to the desired key, and select it.

2. To start the recording, select . To start the recording during a call, select Options > Record. While

recording a call, all parties to the call hear a faint beeping sound about every 5 seconds. When recording a call, hold the phone in the normal position near to your ear.

3. To end the recording, select . The recording is saved in My Items > Recordings.

4. To listen to the latest recording, select Options > Play last recorded.

5. To send the last recording using infrared, Bluetooth wireless technology, or a multimedia message, select

Options > Send last recorded.

List of recordings

Select Menu > Media > Voice recorder > Options > Recordings list. The list of folders in the My Items is shown. Open Recordings to see the list with recordings. Select Options to select options for files in the My Items. See

My Items p. 80.

Define a storage folder

To use another folder than Recordings as the default folder in My Items, select Menu > Media > Voice

recorder > Options > Select memory. Scroll to a folder, and select Set.

■ Equalizer

You can control the sound quality when using the music player by amplifying or diminishing frequency bands.

Select Menu > Media > Equaliser.

To activate a set, scroll to one of the equalizer sets, and select Activate.

To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed.

7. Web

You can access various mobile Internet services with your phone browser.

Important: Use only services that you trust and that offer adequate security and protection against harmful software.

Check the availability of these services, pricing, tariffs, and instructions with your service provider.

With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size. You may not be able to view all details of the Internet pages.

■ Basic steps to access and use services

1. Save the service settings that are required to access the service that you want to use. See Set up browsing

p. 46.

2. Make a connection to the service. See Connect to a service p. 47.

3. Start browsing the pages of the service. See Browse pages p. 47.

4. When you finish browsing, end the connection to the service. To disconnect, see Options while browsing

p. 48.

■ Set up browsing

You may receive the configuration settings required for browsing as a configuration message from the network operator or service provider that offers the service that you want to use. See Configuration settings service p. 17. You can also enter all the configuration settings manually. See Configuration p. 110.

■ Connect to a service

First, ensure that the correct configuration settings of the service that you want to use are activated.

1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings.

2. Select Configuration. Only the configurations that support browsing service are shown. Select a service

provider, Default, or Personal configuration for browsing. See Set up browsing p. 46.

3. Select Account and a browsing service account contained in the active configuration settings.

4. Select Display terminal window > Yes to perform manual user authentication for intranet connections.

Secondly, make a connection to the service in one of the following ways:

•Select Menu > Web > Home; or in the standby mode, press and hold 0.

• To select a bookmark of the service, select Menu > Web > Bookmarks.

• To select the last URL, select Menu > Web > Last web address.

• To enter the address of the service, select Menu > Web > Go to address. Enter the address of the service,

and select OK.

■ Browse pages

After you make a connection to the service, you can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider.

If packet data is selected as the data bearer, is shown on the top left of the display during browsing. If you receive a call or a text message, or make a call during a packet data connection, is shown on the top right of the display to indicate that the packet data connection is suspended (on hold). After a call the phone tries to reconnect the packet data connection.

Browse with phone keys

To browse through the page, scroll in any direction.

To select a highlighted item, press the call key, or select Select.

To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *.

Options while browsing

Select from the following options:

Home — to return to your start page

Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page

contains shortcuts.

Add bookmark — to save the page as a bookmark

Bookmarks — to access the list of bookmarks. See Bookmarks p. 49.

Page options — to show the list of options for the active page

History — to get a list showing the last visited URLs

Other options — to show a list of other options

Reload — to reload and update the current page

Quit — to disconnect from a service

The service provider may also offer other options.

Direct calling

The browser supports functions that you can access while browsing. You can make a phone call, send DTMF tones while a voice call is in progress, and save a name and a phone number from a page.

■ Bookmarks

You can save page addresses as bookmarks in the phone memory.

1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks.

2. Scroll to a bookmark, and select it, or press the call key to make a connection to the page associated with

the bookmark.

3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the

bookmark to a folder.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.

Receive a bookmark

When you have received a bookmark that is sent as a bookmark,

1 bookmark received is displayed. To save the bookmark, select Show > Save. To view or delete the bookmark,

select Options > View or Delete. To discard the bookmark directly after you have received the bookmark, select

Exit > OK.

■ Appearance settings

While browsing, select Options > Other options > Appearance settings, or in the standby mode, select Menu >

Web > Settings > Appearance settings and from the following options:

Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is

abbreviated.

Font size > Extra small, Small, or Medium — to set the font size

Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of

pictures.

Alerts > Alert for unsecure conn. > Yes — to set the phone to alert when a secure connection changes to an

unsecure one during browsing

Alerts > Alert for unsecure items > Yes — to set the phone to alert when a secure page contains an unsecure

item. These alerts do not guarantee a secure connection. For more information, see Browser security p. 52.

Character encoding > Content encoding — to select the encoding for the browser page content

Character encoding > Unicode (UTF-8) web add. > On — to set the phone to send a URL as a UTF-8 encoding.

You may need this setting when you access a Web page created in foreign language.

Screen size > Full or Small — to set the screen layout

JavaScript > Enable — to enable the Java scripts

■ Security settings

Cookies

A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See Cache memory p. 52.

While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select

Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies,

select Allow or Reject.

Scripts over secure connection

You can select whether to allow the running of scripts from a secure page. The phone supports WML scripts.

While browsing, to allow the scripts, select Options > Other options > Security > WMLScript settings; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts in sec. conn. > Allow.

■ Download settings

To automatically save all downloaded files in My Items, select Menu > Web > Settings > Downloading

settings > Automatic saving > On.

■ Service inbox

The phone is able to receive service messages (pushed messages) sent by your service provider (network service). Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service.

To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web >

Service inbox.

To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete.

Service inbox settings

Select Menu > Web > Settings > Service inbox settings.

To set whether you want to receive service messages, select Service messages > On or Off.

To set the phone to receive service messages only from content authors approved by the service provider, select

Message filter > On. To view the list of the approved content authors, select Trusted channels.

To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message.

■ Cache memory

A cache is a memory location that is used to store data temporarily. If you have tried to ac cess or hav e accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache.

To empty the cache while browsing, select Options > Other options > Clear the cache; in the standby mode, select Menu > Web > Clear the cache.

■ Browser security

Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider.

Security module

The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider.

To view or change the security module settings, select Menu > Settings > Security > Security module settings.

Certificates

Important: Even if the use of certificates makes the risks involved in remote connections and software installation

considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.

Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.

There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by the service provider.

To view the list of the authority or user certificates downloaded into your phone, select Menu > Settings >

Security > Authority certificates or User certificates.

is displayed during a connection, if the data transmission between the phone and the content server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.

Digital signature

You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document.

To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign is shown, which may include the amount and date.

Check that the header text is Read and that the digital signature icon is shown.

If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN.

To sign the text, read all of the text first, and select Sign.

The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing.

Select the user certificate you want to use. Enter the signing PIN (see Access codes p. 16), and select OK. The digital signature icon disappears, and the service may display a confirmation of your purchase.

8. Applications (Apps.)

■ Games

The microSD card of your phone may contain games.

Launch a game

Select Menu > Applications > Games. Scroll to the desired game, and select Open, or press the call key.

For options related to a game, see Application options p. 55.

Game downloads

Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown; see Bookmarks p. 49.

Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

Game settings

To set sounds, lights, and shakes for the game, select Menu > Applications > Options > Application settings.

■ Collection

Your phone software includes some Java applications.

Launch an application

Select Menu > Applications > Collection. Scroll to an application, and select Open, or press the call key.

Application options

Delete — to delete the application from the phone

Details — to give additional information about the application

Update version — to check if a new version of the application is available for download from Web (network

service)

Web page — to provide further information or additional data for the application from an Internet page

(network service). It is only shown if an Internet address has been provided with the application.

Application access — to restrict the application from accessing the network. Different categories are shown.

Select in each category one of the available permissions.

Download an application

Your phone supports J2MEä Java applications. Make sure that the application is compatible with your phone before downloading it.

Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

You can download new Java applications in different ways:

•Select Menu > Applications > Options > Downloads > Application downloads, and the list of available

bookmarks is shown. See Bookmarks p. 49.

For the availability of different services, pricing, and tariffs, contact your service provider.

• Use the game download function. See Game downloads p. 54.

• Use the Nokia Application Installer from Nokia PC Suite to download the applications to your phone.

■ Presenter

The Presenter application is compatible with Microsoft Office PowerPoint and enables you to control slide presentations, a software DVD, an MP3 player, or other PC applications remotely from your device.

To use applications other than slide presentations and desktop mode, you must create a corresponding custom profile on the PC application.

Before you can use the application you must do the following:

1. Install the Nokia Presenter PC application on your PC. (This component is included in the software package,

but is also available for download on the Noka Web site.)

2. Launch and configure the PC component. Make sure that the selected incoming Bluetooth serial port (COM

port) corresponds to the one defined in the Bluetooth software settings on the Bluetooth device of your PC. For details, refer to the PC component documentation and Set up a Bluetooth connection p. 103.

3. Open the slide presentation, or start the application you want to control remotely from your phone.

Select Applications > Collection > Presenter > Connect and the device you want to connect to.

When the Bluetooth Connection Successful dialog appears on your PC screen, you must click on it to confirm the Bluetooth connection.

The list of available application types is displayed. Select Open to access the desired application. Select

Options > Settings to set the Font size for the speaker notes, and Timer (in minutes) to optimize the slide

presentation time available. To save the settings, select Options > Back.

After you have select the slide presentation you browse or skip slides, or jump ahead, by using the 4-way navigation key. To view your speaker notes, select Notes. To point things out on the slides, select Pointer to activate a small black round marker, that you control with the 4-way navigation key. Select Options > Slide list to return to the slide list. Select Options > Application list to return to the list of applications.

To control the mouse pointer (the cursor) remotely from the phone, select the desktop mode. After you open the desktop, the phone automatically controls your mouse pointer. To return to the list of applications, select

Options > Application list.

To quit the Presenter, select Options > Exit.

9. Push To Talk (PTT)

Note: This feature may not be available in your product due to your subscription

(network service).

Push To Talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the PTT key.

You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the people you are calling do not have to answer the phone. The participants should confirm the reception of any communication where appropriate, as there is no other confirmation whether the recipients have heard the call.

To check availability and costs, and to subscribe to the service, contact your network operator or service provider. Roaming services may be more limited than for normal calls.

Before you can use the PTT service, you must define the required PTT service settings. See PTT settings p. 63.

While you are connected to the PTT service, you can use the other functions of the phone. The PTT service is not connected to traditional voice communication; therefore many of the services available for traditional voice calls (for example, voice mailbox) are not available for PTT communication.

■ Connect to the PTT service

To connect to the PTT service, select Menu > Push To Talk > Switch PTT on. indicates the PTT connection. indicates that the service is temporarily unavailable. The phone automatically tries to reconnect to the service until you disconnect from the PTT service. If you have added channels to the phone, you are automatically joined to the active channels, and if you have selected a contact, phonebook group or channel as the default action for the PTT-key, then the name of the selected item is displayed in the standby mode.

To disconnect from the PTT service, select Switch PTT off.

■ Make and receive a PTT call

Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, you can use the phone normally, by holding it to your ear.

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls. One-to-one calls are calls you make to only one person.

Press and hold the PTT key the entire time you are talking, and hold the phone in front of you so that you can see the display. When you are finished, release the PTT key. Talking is allowed on a firstcome, firstserved basis. When someone stops talking, the first person to press the PTT key can talk next.

To check the login status of your contacts, select Menu > Push To Talk > Contacts list. This service depends on your network operator or service provider and is only available for subscribed contacts. , , or indicate that the contact is available, not logged into the PTT service, or unknown. indicates that the contact does not want to be disturbed. You cannot call the contact, but you can send a callback request.

To subscribe a contact, select Options > Subscribe contact, or if one or more contacts are marked, select

Subscribe marked.

Make a channel or a group call

To make a call to a channel, select Channel list in the PTT menu, scroll to the desired channel, and press the PTT key.

To make a group call from Contacts, the recipients must be connected to the PTT service. Select Menu >

Contacts > Groups, scroll to the desired group, and press the PTT key.

Make a one-to-one call

To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the PTT key.

You can also select the contact from Contacts.

To start a one-to-one call from the list of PTT channels, select Channel list, and scroll to the desired channel. Select Members, scroll to the desired contact, and press the PTT key.

To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to the desired contact, and press the PTT key.

Make a PTT call to multiple recipients

You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and must accept the call to participate.

Select Menu > Push To Talk > Contacts list, and mark the desired contacts. To make the call, press the PTT key. The contacts who accept the call are shown.

Receive a PTT call

A short tone notifies you of an incoming PTT call. Information such as the channel name or the nickname (network service) of the caller is displayed.

If you have set the phone to first notify you of one-to-one calls, accept or reject the call.

If you press the PTT key to try to respond to a call while another member is talking, you hear a tone, and

Queuing is displayed as long as you press the PTT key. Press and hold the PTT key, and wait for the other person

to finish; then you can talk.

■ Callback requests

If you make a one-to-one call and do not get a response, you can send a request for the person to call you back.

Send a callback request

You can send a callback request in the following ways:

• To send a callback request from the contacts list in the PTT menu, select Contacts list. Scroll to a contact,

and select Options > Send callback.

• To send a callback request from Contacts, search for the desired contact, select Details, scroll to the PTT

address, and select Options > Send callback.

• To send a callback request from the channel list in the Push To Talk menu, select Channel list, and scroll to

the desired channel. Select Members, scroll to the desired contact, and select Options > Send callback.

• To send a callback request from the callback request list in the Push To Talk menu, select Callback inbox.

Scroll to a contact, and select Options > Send callback.

Respond to a callback request

When you receive a callback request, Callback request received is shown in the standby mode. Select View. The list of contacts who have sent you callback requests is shown.

To make a one-to-one call, press the PTT key.

To send a call request back to the sender, select Options > Send callback.

To delete the request, select Delete.

To view the sender's PTT address, select View.

To save a new contact or to add the PTT address to a contact, select Options > Save as or Add to contact.

■ Add a one-to-one contact

You can save the names of persons to whom you often make one-to-one calls in the following ways:

• To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options >

Add detail > Push To Talk address.

• To add a contact to the PTT contacts list, select Menu > Push To Talk > Contacts list > Options > Add

contact.

• To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the

desired channel. Select Members, scroll to the member whose contact information you want to save, and select Options. To add a new contact, select Save as. To add a PTT address to a name in Contacts, select Add

to contact.

■ PTT channels

When you call a channel, all members joined to the channel hear the call simultaneously.

There are three types of PTT channels:

• Provisioned channel — A permanent channel is created by the service provider.

• Public — Every channel member can invite other persons.

• Private — Only persons who receive an invitation from the channel creator can join in.

Add a channel

To add a public or private channel, select Menu > Push To Talk > Add channel, and edit the settings in the form fields:

Channel status: — Select Active or Inactive.

Nickname in channel: — Enter your nickname for the channel.

Channel security: — Select Public group or Private group.

To send an invitation to the group, select Yes when the phone requests it. You can send the invitation using a text message or infrared.

To add a channel by entering the channel address manually, select Menu > Push To Talk > Add channel >

Options > Edit address manually. Enter the channel address provided by your service provider.

Receive an invitation

When you receive an invitation to a group, Channel invitation received: is displayed.

1. To view the contact who sent the invitation and the channel address if the group is not a private channel,

select View.

2. To add the channel to your phone, select Save.

3. To set the status for the channel, select Active or Inactive.

To reject the invitation, select View > Discard > Yes.

■ PTT settings

There are two kinds of PTT settings: settings for connecting to the service and settings for use.

You may receive the settings for connecting to the service from your network operator or service provider. See

Configuration settings service p. 17. You can enter the settings manually. See Configuration p. 110.

To select the settings for connecting to the service, select Menu > Push To Talk > Configuration sett. and from the following options:

Configuration — to select a service provider, Default, or Personal configuration for PTT service. Only the

configurations that support the PTT service are shown.

Account — to select a PTT service account in the active configuration settings

You can also select from the following options: Push To Talk user name, Default nickname, Push To Tal k

password, Domain, and Server address.

To edit the PTT settings for use, select Menu > Push To Talk > PTT settings, and from the following options:

1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls. To make but not receive

one-to-one calls, select Off. The service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify.

PTT key default function is used to select the default action of the PTT-key. It can be set to opening the

Contacts list or Channel list. It can also be set to directly create a PTT call from any state (unless any other

contact, group or channel is highlighted) to a contact, channel or group.

Show my login status > Yes — to enable the sending of the login status

PTT status in startup >Yes > or Ask first — to set the phone to automatically connect to the PTT service when

you switch on the phone

PTT when abroad — to switch the PTT service on or off when the phone is used outside of the home network

Send my PTT address > No — to hide your PTT address from calls

10. Messaging

You can read, write, send, and save text, multimedia, email, audio, and flash messages. All messages are organized into folders.

■ Text messages (SMS)

With the short message service (SMS) you can send and receive text messages (network service).

Before you can send any text or SMS email message, you must save your message center number. See Message

settings p. 76.

To check SMS email service availability and to subscribe to the service, contact your service provider. To save an email address in Contacts, see Save numbers and text items p. 86.

Your device supports the sending of text messages beyond the character limit for a single message. Longer messages is sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.

At the top of the display, you can see the message length indicator counting backwards from the maximum number of characters supported by the phone.

Write and send SMS messages

1. Select Menu > Messaging > Create message > Text message.

2. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add >

Contact. To send the message to multiple recipients, add the desired contacts one by one. Scroll right to add

new contacts manually in the To: field. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently

used.

3. Scroll down, and write your message in the Message: field. See Write text p. 36.

To insert a template into the message, select Options > Use template.

4. To send the message, select Send; or press the call key. See Send a message p. 68.

Read and reply to an SMS message

1 message received or the number of new messages with messages received are shown when you have received

a message.

1. To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messaging > Inbox. If more than one message is received, select the message you want to read. is shown if you have unread messages in Inbox.

2. To view the list of available options while reading a message, select Options. You can, for example, select to

copy text from the beginning of a message to your phone calendar as a reminder note.

3. To reply to a message, select Reply > Text message, Multimedia, Flash message, or Audio message.

To send a text message to an e-mail address, enter the e-mail address in the To: field.

Scroll down, and write your message in the Message: field. See Write text p. 36.

If you want to change the message type for your reply message, select Options > Change message type.

4. To send the message, select Send; or press the call key.

■ SIM messages

SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. Received messages are saved to the phone memory.

To read SIM messages, select Menu > Messaging > Options > SIM messages.

■ Multimedia messages

Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of

a message may vary depending on the receiving device.

To check availability and to subscribe to the multimedia messaging network service, contact your network operator or service provider. See Multimedia message p. 77.

A multimedia message can contain text, sound, pictures, video clips, a business card, and a calendar note. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, animated GIF and WBMP

• Sound: AMR audio

• Video clip: .3gp format with H.263 or MPEG video (QCIF resolution), WB or AMR audio

• Other: vCard (Business card) and vCalendar (Calendar note)

The phone may not support all variations of the file formats.

You can receive multimedia messages during a call, another Java application, or an active browsing session over WCDMA data.

Write and send a multimedia message

The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.

1. Select Menu > Messaging > Create message > Multimedia.

2. Enter your message.

Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide.

To insert a file in the message, select Insert or Options > Insert.

You can fetch images and video clips from the My Items, or to take them directly from the viewfinder, select

Options > Insert > New Image or New video clip.

3. To view the message before sending it, select Options > Preview.

4. To send the message, select Send; or press the call key. See Send a message p. 68.

5. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add >

Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the

message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used.

Send a message

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred, or forwarded.

When you finish writing your message, to send the message, select Send, or press the call key. The phone saves the message in the Outbox folder, and sending starts. If you select Save sent messages > Yes, the sent message is saved in the Sent items folder. See General p. 76.

Note: When the phone sends the message, the animated is shown. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.

It takes more time to send a multimedia message than to send a text message. While the message is being sent, you can use other functions on the phone. If an interruption occurs while the message is being sent, the phone

tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later.

Cancel message sending

When the phone is saving a message in the Outbox folder, Sending message or Sending messages is displayed. To cancel the text message sending, select Cancel.

To cancel the sending of the multimedia messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending.

Read and reply to a multimedia message

Important: Exercise caution when opening messages. Multimedia message objects may contain malicious

software or otherwise be harmful to your device or PC.

Multimedia message received or the number of new messages with messages received is shown when you

receive a new multimedia message.

1. To read the message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messaging > Inbox. Scroll to the message that you want to view, and select it. is shown if you have unread messages in Inbox.

2. To view the whole message if the received message contains a presentation, select Play.

To view the files in the presentation or the attachments, select Options > Objects or Attachments.

3. To reply to the message, select Options > Reply > Text message, Multimedia, Flash message, or Audio

message. Write the reply message.

If you want to change the message type for your reply message, select Options > Change message type. The new message type may not support all the content that you have added.

4. To send the message, select Send; or press the call key. See Send a message p. 68.

■ Memory full

When you are receiving a message, and the memory for the messages is full, Memory full, not possible to

receive message(s) is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired

message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked.

To free phone memory, delete photos, ringing tones, or other data in the phone memory.

■ Folders

The phone saves received messages in the Inbox folder.

Messages that have not yet been sent are saved in the Outbox folder.

To set the phone to save the sent messages in the Sent items folder, see Save sent messages in General p. 76.

To save the message that you are writing and want to send later in the Drafts folder, select Menu >

Messaging > Drafts.

You can move your messages to the Saved items folder. To organize your Saved items subfolders, select

Menu > Messaging > Saved items > Saved messages or a folder that you add. To add a new folder for your

messages, select Options > Add folder. To delete or rename a folder, scroll to the desired folder, and select

Options > Delete folder or Rename folder.

Your phone has templates. To create a new template, save or copy a message as a template. To access the template list, select Menu > Messaging > Saved items > Templates.

■ Flash messages

Flash messages are text messages that are instantly displayed upon reception. Flash messages are not automatically saved.

Write a flash message

Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To: field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To send the message, select Send.

Receive a flash message

A received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail.

■ Audio messages

Note: This feature may not be available in your product due to your subscription (network service).

With this menu, use the multimedia message service to create and send a voice message in a convenient way. Multimedia messaging service must be activated before you can use audio messages.

Create an audio message

1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see

Voice recorder p. 44.

2. To view the available options, select Options.

3. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add >

Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the

message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used.

4. To send the message, select Send.

Receive an audio message

When your phone receives audio messages, the number of messages and the text messages received is shown. To open the message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit. Select Options to see the available options.

■ Email application

The email application uses a packet data connection (network service) to allow you to access your email account from your phone when you are not in the office or at home. This email application is different from the SMS email function. To use the email function on your phone, you need a compatible email system.

You can write, send, and read email with your phone. You can also save and delete the email on a compatible PC. Your phone supports POP3 and IMAP4 email servers.

Before you can send and retrieve any email messages, you must do the following:

• Obtain a new email account or use your current account. To check the availability of your email account,

contact your email service provider.

• Check your email settings with your network operator or email service provider. You may receive the email

configuration settings as a configuration message. See Configuration settings service p. 17. You can also enter the settings manually. See Configuration p. 110.

To activate the email settings, select Menu > Messaging > Message settings > Email messages. See Email p. 78.

This application does not support keypad tones.

Settings Wizard

The settings wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu > Messaging > Email > Options > Manage accounts > Options > New.

The Manage accounts options allow you to add, delete, and change the e-mail settings. Make sure that you have defined the correct preferred access point for your operator. See Configuration p. 110. The e-mail application requires an Internet access point without a proxy. WAP access points normally include a proxy and do not work with the e-mail application.

Write and send an email

You can write your email message before connecting to the email service; or connect to the service first, then write and send your email.

1. Select Menu > Messaging > Email > Create e-mail.

2. If more than one e-mail account is defined, select the account from which you want to send the e-mail.

3. Enter the recipient’s email address.

4. Write a subject for the email.

5. Write the email message. See Write text p. 36.

To attach a file to the email, select Options > Attach and a file from My Items.

6. To send the email message immediately, select Send > Send now.

To save the email in the Outbox folder to be sent later, select Send > Send later.

To edit or continue writing your email later, select Options > Save draft. The email is saved in Outboxes >

Drafts.

To send the email later, select Menu > Messaging > Email > Options > Send now or Send and check e-mail.

Download email

1. To download email messages that have been sent to your email account, select Menu > Messaging >

Email > Check for new e-mail.

If more than one e-mail account is defined, select the account from which you want to download the email.

The e-mail application only downloads e-mail headers at first.

2. Select Back.

3. Select Inboxes, the account name, and the new message, and select Retrieve to download the complete e-

mail message.

To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select

Options > Send and check e-mail

Read and reply to email

Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.

1.Select Menu > Messaging > Email > Inboxes, the account name, and the desired message.

2. While reading the message, select Options to view the available options.

3. To reply to an email, select Reply > Original text or Empty screen. To reply to many, select Options > Reply

to all. Confirm or edit the email address and subject, then write your reply.

4. To send the message, select Send > Send now.

E-mail folders

Your phone saves email that you have downloaded from your email account in the Inboxes folder. The Inboxes folder contains the following folders: “Account name” for incoming email, Archive for archiving email, Custom

1—Custom 3 for sorting e-mail, Junk where all spam e-mail is stored, Drafts for saving unfinished email, Outbox for saving email that has not been sent, and Sent items for saving email that has been sent.

To manage the folders and their email content, select Options to view the available options of each folder.

Spam filter

The e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select

Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows the user to put specific

senders on a black or white list. Black list sender messages are filtered to the Junk folder. Unknown and White list sender messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender.

■ Voice messages

The voice mailbox is a network service, and you may need to subscribe to it. For more information and for your voice mailbox number, contact your service provider.

To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter, find, or edit your voice mailbox number, select Voice mailbox number.

If supported by the network, indicates new voice messages. To call your voice mailbox number, select

Listen.

■ Info messages

With the Info messages network service, you can receive messages on various topics from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider.

■ Service commands

Select Menu > Messaging > Service commands. Write and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider.

■ Delete messages

To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from which you want to delete messages. Scroll to the desired message, and select Delete. To mark more than one message, select Options > Mark. Mark all the messages you want to delete, and select Options > Delete

marked.

To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the folder to delete. Depending on the folder, the phone asks if you want to delete the messages.

To delete all messages from all folders, select Menu > Messaging > Delete messages > All messages > Yes.

■ Message settings

General

General settings are common for text and multimedia messages.

Select Menu > Messaging > Message settings > General settings and from the following options:

Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folder

Overwriting in sent items — to select whether overwriting is allowed when messages are sent and the memory

is full

Font size — to select the font size used in messages

Graphical smileys > Yes — to set the phone to replace character-based smileys with graphical ones

Text message and SMS email

The text message settings affect the sending, receiving, and viewing of messages.

Select Menu > Messaging > Message settings > Text messages and from the following options:

Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)

Message centres > Add centre — to set the phone number and name of the message center that is required for

sending text messages. You receive this number from your service provider. If you select SIM message centre, you can view the SIM message center information.

Message centre in use — to select the message center in use

E-mail message centres > Add centre — to set the phone numbers and name of the e-mail center for sending

SMS e-mail. If you select SIM email centre, you can view the SIM e-mail center information.

E-mail centre in use — to select the SMS e-mail message center in use

Message validity — to select the length of time for which the network attempts to deliver your message

Messages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service)

Use packet data > Yes — to set GPRS or WCDMA as the preferred SMS bearer

Character support > Full — to select all char act ers in t he mess age s to be sent as v iewed

Reply via same centre > Yes — to allow the recipient of your message to send you a reply using your message

center (network service)

Multimedia message

The message settings affect the sending, receiving, and viewing of multimedia messages.

You may receive the configuration settings for multimedia messaging as a configuration message. See

Configuration settings service p. 17. You can also enter the settings manually. See Configuration p. 110.

Select Menu > Messaging > Message settings > Multimedia messages and from the following options:

Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)

Image size (multimedia) — to define the default image size used in multimedia messages

Default slide timing — to define the default time between slides in multimedia messages

Allow multimedia recept. — to receive or block the multimedia message, select Yes or No. If you select In home network, you cannot receive multimedia messages when you are outside your home network. The default

setting of the multimedia message service is generally In home network.

Incoming multim. msgs. — to allow the reception of multimedia messages automatically, manually after being

prompted, or to reject the reception. This setting is not shown if Allow multimedia recept. is set to No.

Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia recept. is set

to No, or Incoming multim. msgs. is set to Reject.

Configuration settings > Configuration — only the configurations that support multimedia messaging are

shown. Select a service provider, Default, or Personal configuration for multimedia messaging. Select Account and a multimedia messaging service account contained in the active configuration settings.

Email

The settings affect the sending, receiving, and viewing of email.

You may receive the configuration settings for the email application as a configuration message. See

Configuration settings service p. 17. You can also enter the settings manually. See Configuration p. 110.

To activate the settings for the email application, select Menu > Messaging > Message settings > Email

messages and from the following options:

Configuration — Select the set that you want to activate.

Account — Select an account provided by the service provider.

My name — Enter your name or nickname.

Email address — Enter your email address.

Include signature — You can define a signature that is automatically added to the end of your email when you

write your message.

Reply-to address — Enter the email address to which you want the replies to be sent.

SMTP user name — Enter the name that you want to use for outgoing mail.

SMTP password — Enter the password that you want to use for outgoing mail.

Display terminal window — Select Yes to perform manual user authentication for intranet connections.

Incoming server type — Select POP3 or IMAP4, depending on the type of email system that you are using. If

both types are supported, select IMAP4.

Incoming mail settings — Select available options for POP3 or IMAP4.

11. My Ite ms

In this menu you can manage graphics, images, recordings, and tones. These files are arranged in folders.

Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.

The files stored in My Items use a memory that mainly consists of the microSD card of your phone. You can store images, themes, graphics, ringing tones, video clips, and sound clips in My Items.

To manage the files and folders, do the following:

1. Select Menu > My Items. A list of folders is shown. If a memory card is inserted in the phone, the folder

Memory card, (unformatted), or the name of the memory card is shown.

2. Scroll to the desired folder. To view a list of files in the folder, select Open. For the available options, select

Options.

3. Scroll to the file you want to view, and select Open. For the available options, select Options.

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.

■ Format memory card

To format a new memory card, select Menu > My Items. Scroll to the memory card folder, and select Options >

Format memory card.

12. Organizer

■ Alarm clock

You can set the phone to alarm at a desired time. Select Menu > Organizer > Alarm clock.

To set the alarm, select Alarm time, enter the alarm time, and select OK. To change the alarm time when the alarm time is set, select On.

To set the phone to alert you on selected days of the week, select Repeat alarm.

To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. The phone uses the last channel you listened to as the alarm, and the alarm plays through the loudspeaker. If you remove the headset or switch off the phone, the default alarm tone replaces the radio.

To set a snooze time-out, select Snooze time-out and the time.

Stop the alarm

The phone sounds an alert tone, and flashes Alarm! and the current time on the display, even if the phone was switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute or select Snooze, the alarm stops for the time you set in Snooze time-out, and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

■ Calendar

Select Menu > Organizer > Calendar.

The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.

Other options for the calendar day view can make a note; delete, edit, move, or repeat a note; copy a note to another day; send a note with Bluetooth technology; or send a note to the calendar of another compatible phone as a text message or multimedia message. In Settings you can set the date, time, time zone, date or time format, date separator, default view, or the first day of the week. In Auto-delete notes you can set the phone to delete old notes automatically after a specified time.

Make a calendar note

Select Menu > Organizer > Calendar. Scroll to the date you want, select Options > Make a note and one of the following note types: Meeting, Call, Birthday, Memo, or Reminder. Fill in the fields for the note.

Note alarm

The phone beeps and displays the note. With a call note on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select

Snooze.

To stop the alarm without viewing the note, select Exit.

■ To-do list

To save a note for a task that you must do, select Menu > Organizer > To-do list.

To make a note if no note is added, select Add; otherwise, select Options > Add. Write the note, select Save and the priority, and set the deadline and alarm for the note.

To view a note, scroll to it, and select View.

You can also select an option to delete the selected note and delete all the notes that you have marked as done. You can sort the notes by priority or by deadline, send a note to another phone as a text message or a multimedia message, save a note as a calendar note, or access the calendar.

While viewing a note, you can also select an option to edit the deadline or priority for the note, or mark the note as done.

■ Notes

To write and send notes, select Menu > Organizer > Notes.

To make a note if no note is added, select Add; otherwise, select Options > Make a note. Write the note, and select Save.

Other options include deleting and editing a note. While editing a note, you can also exit the text editor without saving the changes. You can send the note to compatible devices through infrared, Bluetooth wireless technology, text message, or a multimedia message. If the note is too long to be sent as a text message, the phone asks you to delete the appropriate number of characters from your note.

■ Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root, and converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

Select Menu > Organizer > Calculator. When 0 is displayed, enter the first number in the calculation. Press # for a decimal point. Select Options > Add, Subtract, Multiply, Divide, Square, Square root, or Change sign. Enter the second number. For a total, select Equals. To start a new calculation, first select and hold Clear.

Convert currency

Select Menu > Organizer > Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign.

Note: When you change base currency, you must enter the new rates because all previously set exchange rates are cleared.

■ Countdown timer

Select Menu > Organizer > Countdown timer. Enter the alarm time in hours, minutes, and seconds, and select

OK. If you wish, write your own note text that is displayed when the time expires. To start the countdown

timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer.

If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text if it is set or Countdown time up. To stop the alarm, press any key. If no key is pressed, the alarm automatically stops within 30 seconds. To stop the alarm and delete the note text, select Exit. To restart the countdown timer, select Restart.

■ Stopwatch

You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key.

Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.

Select Menu > Organizer > Stopwatch and from the following options:

Split timing — to take intermediate times. To start the time observation, select Start. Select Split every time

that you want to take an intermediate time. To stop the time observation, select Stop.

To save the measured time, select Save.

To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset.

To set the stopwatch timing in the background, press the end key.

Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key.

Continue — to view the timing that you have set in the background

Show last — to view the most recently measured time if the stopwatch is not reset

View times or Delete times — to view or delete the saved times

13. Contacts

You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory.

The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image or a video clip for a limited number of contacts. You can also use the video clip saved with a contact as a ringing tone for the contact.

The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM card memory are indicated by .

■ Search for a contact

Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name.

■ Save names and phone numbers

Names and numbers are saved in the used memory. To save a name and phone number, select Menu >

Contacts > Names > Options > Add new contact. Enter the last name, first name, and the phone number.

■ Save numbers and text items

In the phone memory for contacts you can save different types of phone numbers and short text items per name.

The first number you save is automatically set as the default number, and it is indicated with a frame around the number type indicator (for example, ). When you select a name from contacts (for example, to make a call), the default number is used unless you select another number.

1. Make sure that the memory in use is Phone or Phone and SIM.

2. Search for the contact to which you want to add a new number or text item, and select Details > Options >

Add detail.

3. To add a number, select Number and a number type.

To add another detail, select a text type, an image or a video clip from My Items, or a new image.

To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select

Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.

To change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default.

4. Enter the number or text item; to save it, select Save.

■ Copy contacts

Search for the contact you want to copy, and select Options > Copy. You can copy names and phone numbers from the phone contact memory to the SIM card memory, or vice versa. The SIM card memory can save names with one phone number attached to them.

■ Edit contact details

Search for the contact you want to edit, and select Details. To edit a name, number, text item, or to change the image, select Options > Edit. You cannot edit an ID when it is on the IM contacts list.

■ Delete contacts

To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu >

Contacts > Delete all contacts > From phone memory or From SIM card. Confirm with the security code.

To delete a contact, search for the desired contact, and select Options > Delete contact.

To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from My Items.

■ Business cards

You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card.

To send a business card, search for the contact whose information you want to send, and select Details >

Options > Send business card > Via multimedia, Via text message, Via infrared, or Via Bluetooth.

When you receive a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.

■ Settings

Select Menu > Contacts > Settings and from the following options:

Memory in use — to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall

names and numbers from both memories. In that case, when you save names and numbers, they are saved in the phone memory.

Contacts view — to select how the names and numbers in Contacts are displayed

Name display — to select whether the contact’s first or last name is displayed first

Font size — to set the font size for the list of contacts

Memory status — to view the free and used memory capacity

■ Groups

Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images.

■ Speed dials

To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed- dialing number that you want.

Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in Call p. 108.

To make a call using the speed-dialing keys, see Speed dialing p. 31.

■ Service and my numbers

Select Menu > Contacts and from the following options:

Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM

card (network service)

My numbers — to view the phone numbers assigned to your SIM card. This is only shown if the numbers are

included on your SIM card.

14. Log

Note: This feature may not be available in your product due to your subscription

(network service).

To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients.

To view the approximate information on your recent communications, select Menu > Log > Call duration,

Packet data counter, or Packet data timer.

To view how many text and multimedia messages you have sent and received, select Menu > Log > Message

log.

Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.

Note: Some timers, including the life timer, may be reset during service or software upgrades.

15. Instant messages (IM)

Note: This feature may not be available in your product due to your subscription

(network service).

Instant messaging (IM) (network service) is a way to send short, simple text messages to online users, delivered over TCP/IP protocols.

Before you can use instant messaging, you must subscribe to the service. To check the availability and costs, and to subscribe to the service, contact your network operator or service provider, from whom you also receive your unique ID, password, and settings.

To set the required settings for the instant messaging service, see Connection settings in Access the instant

messaging menu p. 91. The icons and texts on the display may vary, depending on the instant messaging

service.

While you are connected to the instant messaging service, you can use the other functions of the phone, and the instant messaging conversation remains active in the background. Depending on the network, the active instant messaging conversation may consume the phone battery faster, and you may need to connect the phone to a charger.

Access the instant messaging menu

To access the Instant messages menu while still offline, select Menu > Instant messages. If more than one set of connection settings for instant messaging service is available, select the desired one. If there is only one set defined, it is selected automatically.

The following options are shown:

messaging service when you switch on the phone, select Menu > Instant messages, connect to the instant messaging service, and select My settings > Automatic login > On phone start-up.

Saved conversations — to view, erase, or rename the conversations that you saved during an instant messaging

session

Connection settings — to edit the settings needed for messaging and presence connection

Connect to instant messaging

To connect to the instant messaging service, access the Instant messages menu, select the desired instant messaging service if needed, and select Login. When the phone has successfully connected, Logged in is displayed.

To disconnect from the instant messaging service, select Logout.

Start an instant messaging conversation

Open the Instant messages menu, and connect to the instant messaging service. You can start a conversation in different ways:

Select Conversations. The list of new and read messaging sessions or invitations to instant messaging during the active conversation is displayed. Scroll to a message or an invitation, and select Open.

indicates new and read instant messages.

indicates new and read group messages.

indicates invitations.

The icons and texts on the display may vary, depending on the instant messaging service.

Select IM contacts. The contacts that you added to the list are displayed. Scroll to the contact with whom you would like to start instant messaging, and select Chat, or if is shown next to a contact, select Open.

indicates an online contact and an offline contact in the contact memory of the phone.

indicates a blocked contact. See Block and unblock messages p. 95.

indicates that you have received a new message from a contact.

You can add contacts to the list. See Contacts for instant messaging p. 95.

Select Groups > Public groups (dimmed if groups are not supported by the network). The list of bookmarks to public groups provided by the network operator or service provider is displayed. To start a conversation, scroll to a group, and select Join. Enter the screen name that you want to use as a nickname in the conversation. When you have successfully joined the group conversation, you can start a group conversation. You can also create a private group. See Groups p. 95.

Select Search > Users or Groups to search for other instant messaging users or public groups on the network by phone number, screen name, email address, or name. If you select Groups, you can search for a group by a member in the group or by group name, topic, or ID.

To start the conversation when you have found the user or the group that you want, select Options > Chat or

Join group.

Start a conversation from Contacts.

Instant messaging invitation

In the standby mode, when you are connected to the instant messaging service and you receive a new invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received, scroll to an invitation, and select Open.

To join the private group conversation, select Accept. Enter the screen name that you want to use as a nickname in the conversation.

To reject or delete the invitation, select Options > Reject or Delete. You can write an explanation for the rejection.

Read a received instant message

In the standby mode, when you are connected to the instant messaging service and you receive a new message that is not a message associated with an active conversation, New instant message is displayed. To read it, select Read.

If more than one message is received, the number of messages, followed by new instant messages, is displayed. Select Read, scroll to a message, and select Open.

New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. If the sender is in the phone memory and the phone recognizes it, the name of the person is displayed. To save a new contact that is not in the phone memory, select Options > Save contact.

Join an instant messaging conversation

To join or start a conversation, select Write or start writing.

Tip: If you receive a new message during a conversation from a person who is not taking part in the current conversation, is displayed, and the phone sounds an alert tone.

Write your message. To send it, select Send, or press the call key. The message stays on the display, and

the reply message appears below your message.

Edit your availability status

1. Open the Instant messages menu, and connect to the instant messaging service.

2. To view and edit your own availability information or screen name, select My settings.

3. To allow all the other instant messaging users to see when you are online, select Availability > Available for

all.

To allow only the contacts on your instant messaging contact list to see when you are online, select

Availability > Available for contacts.

To appear as being offline, select Availability > Appear offline.

When you are connected to the instant messaging service, indicates that you are online and that you are not visible to others.

Contacts for instant messaging

To add contacts to the instant messaging contacts list, do the following:

1. Connect to the instant messaging service, and select IM contacts.

2. Select Options > Add contact, or if you have no contacts added, select Add. Select Enter ID manually,

Search from server, Copy from server, or By mobile number. When the contact is successfully added, the

phone confirms it.

3. Scroll to a contact, and to start a conversation, select Chat.

Block and unblock messages

To block messages, connect to the instant messaging service, and select Conversations > IM contacts, or join or start a conversation. Scroll to the contact from whom you want to block incoming messages, and select

Options > Block contact > OK.

To unblock messages, connect to the instant messaging service, and select Blocked list. Scroll to the contact from whom you want to unblock the messages, and select Unblock.

You can also unblock messages from the contact list.

Groups

You can create your own private groups for an instant messaging conversation, or use the public groups provided by the service provider. The private groups exist only during an instant messaging conversation. The groups are saved on the server of the service provider. If the server you are logged into does not support group services, all grouprelated menus are dimmed.

Public groups

You can bookmark public groups that your service provider may maintain. Connect to the instant messaging service, and select Groups > Public groups. Scroll to a group to which you want to chat, and select Join. If you are not in the group, write your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group.

To search for a group, select Groups > Search groups. You can search for a group by a member in the group or by group name, topic, or ID.

Create a private group

Connect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation.

16. Settings

■ Profiles

Your phone has various setting groups, called profiles, which you can customize for different events and environments.

Select Menu > Settings > Profiles and the desired profile. Select from the following options:

Activate — to activate the selected profile

Personalise — to personalize the profile. Select the setting you want to change, and make the changes.

Timed — to set the profile to be active until a certain time up to 24 hours, and set the end time. When the time

set for the profile expires, the previous profile that was not timed becomes active.

Flight mode

You can deactivate all radio frequence functionality and still have access to games, calendar and phonebook. Use flight mode in radio sensitive environments—on board airplanes or in hospitals. When the flight mode is active, the flight icon is visible next to the battery charge level.

Select Settings > Profiles > Flight and from the following options: Activate- Personalise .

To deactivate the flight mode, you scroll to and select any other profile. Every time you try to make a call, you are asked if you want to Exit flight profile? click Yes to deactivate Flight mode.

In the flight mode you can make an emergency call. Enter the emergency number, press the call key, and select

Yes when asked Exit flight profile? The phone attempts to make an emergency call.

When the emergency call ends, the phone automatically enters the general profile mode.

■ Themes

A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme, and a ringing tone.

Select Menu > Settings > Themes and from the following options:

Select theme — to set a theme in your phone. A list of folders in My Items opens. Open the Themes folder, and

select a theme.

Theme downloads — to open a list of links to download more themes

■ Tones

You can change the settings of the selected active profile.

Select Menu > Settings > Tones > Incoming call alert, Ringing tone, Ringing volume, Vibrating alert, PTT

settings, Message alert tone, Instant msg. alert tone, Keypad tones, or Warning tones. You can find the same

settings in the Profiles menu.

To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert

for. Scroll to the caller group you want or All calls, and select Mark.

■ Display

With display settings you can personalize your phone display view.

Standby mode

Enable or disable active standby from idle

To enable the active standby mode, select Menu > Settings > Display > Standby mode settings > Active

standby > My active standby.

To disable the active standby mode, select Menu > Settings > Display > Standby mode settings > Active

standby > Off.

Standby settings

Select Menu > Settings > Display > Standby mode settings and from the following options:

Active standby > My active standby — to display the active standby. Select Options and from the following

options:

• Personalise — to change the content on the display

• Organise — to reorganize the content on the display

• Enabling active standby — to change the key for accessing the navigation mode. The same setting is also in

the My shortcuts menu. See Enable active standby p. 101.

Wallpaper — to set your phone to display an image or a slide as wallpaper when the phone is in the standby

mode. Select Wallpapers > Image or Slide set. Select an image or a slide from My Items, and Options > Set as

wallpaper. To download more graphics, select Graphic downloads.

Standby font colour — to select the color for the texts on the display in the standby mode

Navigation key icons — to set the scroll key icons that are shown in the standby mode

Operator logo — to set your phone to display or hide the operator logo

Cell info display > On — to receive information from the network operator depending on the network cell used

(network service)

Screen saver

To select a screen saver from My Items, select Menu > Settings > Display > Screen saver > Screen savers >

Image, Slide set, Video clip, or Open camera. To download more screen savers, select Graphic downloads. To

select the time after which the screen saver is activated, select Time-out. To activate the screen saver, select

On.

Power saver

To save some battery power, select Menu > Settings > Display > Power saver . A digital clock is displayed when no function of the phone is used for a certain time.

Sleep mode

To save most battery power, select Menu > Settings > Display > Sleep mode. The display turns completely black when no function of the phone is used for a certain time.

■ Time and date

To change the time, time zone, and date settings, select Menu > Settings > Time and date > Clock, Date, or

Auto-update of date/time (network service).

When traveling to a different time zone, select Menu > Settings > Time and date > Clock > Time zone and the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT) or Universal Time Coordinated (UTC). The time and date are set according to the time zone and enable your phone to display the correct sending time of received text or multimedia messages. For example, GMT -5 denotes the time zone for New York (USA), 5 hours west of Greenwich/London (UK).

■ My shortcuts

With personal shortcuts you get quick access to often used functions of the phone.

Nokia 6234 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

For your safety

General information

■ Access codes

Security code

PIN codes

PUK codes

Barring password

■ Configuration settings service

■ Download content and applications

■ Nokia support and contact information

1. Get started

■ Install a memory card

■ Charge the battery

■ Switch the phone on and off

Set the time, time zone, and date

Plug and play service

■ Normal operating position

2. Your phone

■ Keys and parts

■ Standby mode

Active standby

Content items in the navigation mode

Standby mode shortcuts

Power saver

Indicators

■ Keypad lock (keyguard)

3. Call functions

■ Make a voice call

Speed dialing

Enhanced voice dialing

Make a voice dialing call

■ Answer or reject a voice call

Call waiting

■ Options during a voice call

■ Make a video call

■ Answer or reject a video call

■ Options during a video call

4. Write text

■ Settings

■ Predictive text input

■ Traditional text input

5. Navigate the menus

6. Media

■ Camera

Take a photo

Record a video clip

Camera settings

■ Media player

Progressive download

■ Music player

Play the music tracks transferred to the phone

Music player settings

■ Radio

Save radio channels

Listen to the radio

■ Voice recorder

Record sound

List of recordings

Define a storage folder

■ Equalizer

7. Web

■ Basic steps to access and use services

■ Set up browsing

■ Connect to a service

■ Browse pages

Browse with phone keys

Options while browsing

Direct calling

■ Bookmarks

Receive a bookmark

■ Appearance settings

■ Security settings

Cookies

Scripts over secure connection

■ Download settings