Nokia 6162i Owner's Manual

OWNER’S
MANUAL

9352388

Keys

Scroll key

Scroll through
menus, sub­menus, and
the phone
book. Press
and hold for
continuous
scrolling.

Power key

Press and hold to turn your phone
on or off.

Soft keys

Their current
function is
displayed
above the key
(for example,
here their
functions are
“Menu” and
“Names”).

ô

Press this key
to end a
phone call.

ó

Dials the
number on
the display.

Menu

MenuMenu

Menu Names

NamesNames

Names

Keypad
cover

Flip it open to
answer a call
and to access
the keypad.
Flip it closed
to end a call.

Fixed
antenna

Do not
attempt to
extend or
remove!

Indicators and Icons

You have an active call.

The phone is waiting for you to enter a response.

All tones for the current profile have been set to

Silent

.

Keyguard has been activated to help prevent any
accidental keypresses.

You have one or more voice messages waiting.

You have one or more unread text messages waiting.

Digital service is available.

Any characters you enter will be upper-case letters or
numbers. Press the # key to switch letter case.

Any characters you enter will be lower-case letters or
numbers. Press the # key to switch letter case.

This appears when you press and hold the # key when
storing names. Letters can not be entered when this
appears, allowing quicker access to numbers.

You are in “special character” mode; select a special
character and press

Insert

. (When entering letters, you

can switch to this mode by pressing the ∗ key.)

The alarm clock is set.

You have a reminder in your calendar to do something
(appears only on Calendar display).

You have a reminder in your calendar that it’s
someone’s birthday (appears only on Calendar display).

You have a reminder in your calendar to call someone
(appears only on Calendar display).

You have a reminder in your calendar of a meeting
(appears only on Calendar display).

i

1. Safety At A Glance . . . . . . . . . . . . . . . 1

2. Getting Connected. . . . . . . . . . . . . . . 3

Attaching your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Charging your new battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

When is a good time to charge? . . . . . . . . . . . . . . . . . . . . . .4

3. The Basics . . . . . . . . . . . . . . . . . . . . . 7

Switching the phone on and off. . . . . . . . . . . . . . . . . . . . . . . . .7

Get a good signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Using the keypad cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

4. Using Your Phone. . . . . . . . . . . . . . . .11

The display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

What is the ‘start screen’? . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Scrolling through the main menu . . . . . . . . . . . . . . . . . . . . . .12

Help text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Summary of menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

5. Features A to Z . . . . . . . . . . . . . . . . 16

Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

All calls timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Automatic answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Automatic redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Storing exchange rate . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Converting currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Call settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Table of Contents

ii

Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Caller groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Caller ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Making calling card calls . . . . . . . . . . . . . . . . . . . . . . . . . 29

Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Selecting time format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Displaying or hiding the clock . . . . . . . . . . . . . . . . . . . . . . 31

Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Current call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Customer care contact number . . . . . . . . . . . . . . . . . . . . . . . 32

Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Digital/analog selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Entering letters and numbers . . . . . . . . . . . . . . . . . . . . . . . . 35

ABC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Changing letter case . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

123 mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Last call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Life timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Listen to voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Changing your lock code . . . . . . . . . . . . . . . . . . . . . . . . . 43

Manual touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Memory status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Message alert tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

iii

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Missed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Network feature setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Storing codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

One-touch dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Paging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Storing a name and number . . . . . . . . . . . . . . . . . . . . . . . .50

Recalling names & numbers. . . . . . . . . . . . . . . . . . . . . . . .51

Erasing stored names and numbers . . . . . . . . . . . . . . . . . .51

Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Customizing Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Public system selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Ringing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Ringing tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Ringing volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Security code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Changing your security code . . . . . . . . . . . . . . . . . . . . . . .62

Send own number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Storing a name & number. . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Quick save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Text messages and pages. . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Writing text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Receiving text messages . . . . . . . . . . . . . . . . . . . . . . . . . .66

Reading text messages . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Reading options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Receiving a page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

iv

Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Touch tone length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Unlocked phone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Vibrating alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Storing your voice mailbox number . . . . . . . . . . . . . . . . . . 71

Greetings, passwords, and prompts . . . . . . . . . . . . . . . . . 72

Listening to your voice messages . . . . . . . . . . . . . . . . . . . 72

Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Warning and game tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Write new . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

6. Accessories. . . . . . . . . . . . . . . . . . . 75

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Chargers & Other Accessories. . . . . . . . . . . . . . . . . . . . . . . . 77

7. Troubleshooting. . . . . . . . . . . . . . . . 80

8. Reference Information . . . . . . . . . . 81

Radio Frequency (RF) Signals . . . . . . . . . . . . . . . . . . . . . . . . 84

9. Technical Data . . . . . . . . . . . . . . . . . 86

10. NOKIA One-Year Limited Warranty . . 87

11. Index . . . . . . . . . . . . . . . . . . . . . . . . 91

1

1. Safety At A Glance

Read these simple guidelines before using your
phone. Failure to comply with these guidelines may
be dangerous or illegal.

For more detailed safety information, see “Important

Safety Information” on page 81.

Road Safety Comes First

Don’t use a hand-held phone while driving; park the
vehicle first.

Switch Off In Hospitals

Switch off your phone when near medical
equipment. Follow any regulations or rules in force.

Switch Off On Aircraft

Mobile phones can cause interference. Using them
on aircraft is illegal.

Switch Off When Refueling

Do not use the phone at a refueling point. Do not
use near fuels or chemicals.

Switch Off Near Blasting

Do not use the phone where blasting is in progress.
Observe restrictions, and follow any regulations or
rules in force.

Interference

All mobile phones may get interference which could
affect performance.

Use Sensibly

Use only in the normal position (to ear). Avoid
unnecessary contact with the antenna when phone
is on.

Qualified Service

Only qualified service personnel may install or repair
cellular phone equipment.

Accessories and Batteries

Use only approved accessories and batteries.
Do not connect incompatible products.

2

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (e.g. when using
a telephone in close proximity to receiving equipment).
The FCC/Industry Canada can require you to stop using your
telephone if such interference can not be eliminated. If you
require assistance, contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful
interference.

Using this Guide

The wireless phone described in this guide is approved for use
in TDMA/AMPS networks.

A number of features included in this guide are called Network
Services. They are special services provided by wireless service
providers. Before you can take advantage of any of these
Network Services, you must subscribe to the service(s) from
your home service provider and obtain instructions for their use.

Updates

The latest version of this Owner’s Manual may be found on

Nokia’s World Wide Web site at www.NokiaUSA.com.

Interactive manual

Now, Nokia has a great new way for you to learn how to use all

of your phone features. Go to www.NokiaHowTo.com to

access the Nokia Interactive Owner’s Manual. It provides an
interactive way to get step-by-step instructions for any of your
phone’s features.

Disclaimer

It’s possible that you may not be able to activate your phone on
all wireless systems. Please ask your service provider for details.

3

2. Getting Connected

You’ll need to charge your battery once your phone has
been activated. This section will help familiarize you on
how, and when, to charge your battery.

Attaching your battery

Simply place the battery in the grooves on the back of
your phone. Then slide the battery upward until it clicks.

Note: Use only those batteries approved by the phone
manufacturer and recharge your battery only with the chargers
approved by the manufacturer.

See “Important Battery Information” on page 6.

Removing the battery

Note: Switch off the phone before removing the battery!

1.

Press and hold the
button at the top of
the battery.

2.

Slide the battery
toward the bottom of
the phone.

3.

Lift the battery off
the phone.

4

Charging your new battery

Your phone can be used with either a rechargeable
Li-Ion or NiMH battery. Note that a new battery’s full
performance is achieved only after two or three
complete charge and discharge cycles.

With your phone on or off, connect the charger to a
standard 120V AC outlet. Then connect the lead from
the charger to the bottom of your phone or place it on
a charging stand.

When the battery begins charging, your phone will beep
once and the battery strength indicator on the right side
of the display will scroll.

Note: If the battery is totally empty, it may take a few minutes
before the charging indication appears on the display.

If your phone displays

Not charging

, charging is

suspended. Check that the battery is not connected to
a non-approved charging device. If the battery is very
hot or cold, wait for a while; charging will automatically
resume after the battery is restored to its normal
operating state. If charging still fails, contact your dealer.

When is a good time to charge?

You can charge your battery anytime. If you have a
NiMH battery, you should allow it to completely
discharge once in a while.

When your phone beeps once and displays

Battery low

,
you only have a couple of minutes of talk time
remaining. The repetition rate of these battery-low
warnings depend on the remaining battery capacity and
the battery condition. These warnings are more
frequent when you’re in a call.

Note: The phone will not give you the warning tone under
certain conditions. See “Warning and game tones” on page 73.

Once all the power has drained from your battery, you’ll
hear three beeps with the message

Recharge battery

on
your display. At this point, your phone will switch itself
off and you’ll need to recharge your battery.

5

When is charging complete?

When the charge indicators stop scrolling, your
phone is considered fully charged. However, a
slight increase in charge may occur if your
phone is left connected to the charger for a
while. This is called “trickle charge.”

Charging times depend on the type of battery and
charger used.

For approximate charging and operating times, see “Standby
and Talk Times” on page 76.

Can you make calls while charging?

Yes, you can. But your battery may not charge while a
call is in progress. Charging should resume once you
end the call.

Discharging NiMH batteries

A NiMH battery lasts longer and performs better if you
fully discharge it from time to time. To discharge the
battery, leave your phone switched on until the battery
is drained. The phone will display several messages that
the battery is low and that you need to recharge it; just
ignore them. Do not attempt to discharge the battery by
any other means.

6

Important Battery Information

• The battery can be charged and discharged hundreds of

times but it will eventually wear out. When the operating
time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.

• Use only batteries approved by the phone manufacturer

and recharge your battery only with the chargers approved
by the manufacturer. When a charger is not in use,
disconnect it from the power source. Do not leave the
battery connected to a charger for longer than a week,
since overcharging may shorten its life. If left unused a fully
charged battery will discharge itself over time.

• (NiMH batteries only) For good operation times, discharge

the battery from time to time by leaving your phone
switched on until it turns itself off (or by using the battery
discharge facility of any approved accessory available for
your phone). Do not attempt to discharge the battery by
any other means.

• Temperature extremes will affect the ability of your battery

to charge: allow it to cool down or warm up first.

• Use the battery only for its intended purpose.

• Never use any charger or battery which is damaged or

worn out.

• Do not short circuit the battery. Accidental short circuiting

can occur when a metallic object (coin, clip, or pen)
causes direct connection of the + and - terminals of the
battery (metal strips on the back of the battery), for
example when you carry a spare battery in your pocket or
purse. Short circuiting the terminals may damage the
battery or the connecting object.

• Leaving the battery in hot or cold places, such as in a

closed car in summer or winter conditions, will reduce the
capacity and lifetime of the battery. Always try to keep the
battery between 59º F and 77º F (15º C and 25º C). A
phone with a hot or cold battery may temporarily not work,
even when the battery is fully charged. NiMH batteries’
performance is particularly limited in temperatures below
14º F (-10º C). Li-Ion batteries’ performance is particularly
limited in temperatures below 32º F (0º C).

• Do not dispose of batteries in a fire!

• Dispose of used batteries in accordance with any local

regulations.

7

3. The Basics

You have purchased a powerful phone, with lots of
features. Read this section for some very basic
information on how to use your phone.

A more comprehensive description of your phone is
covered in “Features A to Z” starting on page 16.

Switching the phone on and off

Press and hold the

ð

key for two seconds to switch

the phone on or off.

Switching off with the

ð key

Quickly press the

ð

key (

Switch off!

will appear,

highlighted) then press OK.

Note: This method is available in all profiles except

Headset

and

Car

.

NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.

TIPS ON EFFICIENT OPERATION: As with any other radio
transmitting device, do not touch the antenna unnecessarily
when the phone is switched on. Contact with the antenna
affects call quality and may cause the phone to operate at a
higher power level than otherwise needed.

WARNING! Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference or danger.

See “Safety At A Glance” on page 1 for more information.

Get a good signal

Your phone operates on radio waves, and the quality of
radio reception depends entirely on the strength of the
radio signal in your area.

This radio coverage is maintained by a wireless network
and the quality of calls on a wireless phone depends on
the strength of the wireless radio signal.

8

Checking signal strength

When you are at the start screen

(see page 12)

or in a call, the signal strength is indicated by
the indicators on the left side of your phone’s
display. These indicators scroll as the strength
of the signal increases and decreases.

Increasing your phone’s signal may be easy. Try moving
your phone slightly, or move towards a window if you’re
calling from inside a building.

Using the keypad cover

When

Keypad cover setting

is on, you can answer calls
simply by opening the keypad cover. When you want to
hang up, just close the cover and the call will end.

When the keypad cover setting is off, you must open
the keypad cover to answer any calls. Once opened,
you can press any key (except the

ð

and

ô

keys) to

answer a call.

To end a call, press

ô

before closing the keypad

cover.

Activating the keypad cover

1.

Press

Menu

4 2 6

2.

Press

W

or V to On and press

OK

Note: If you’re using a headset and wish to close the keypad
cover and still keep the call active, press

Options

once before

closing the keypad cover.

Making a call

When you want to make a call, open the keypad cover,
enter the area code and phone number and press

ó

Editing a number on display

Press

V

to move the cursor to the left and W to move it

to the right. Press

Clear

to delete the character to the left

of the cursor.

9

Dialing stored phone numbers

View stored names and numbers by pressing

W

or V

from the start screen (

see page 12)

, then press

ó

See “Phone book” on page 49 for details on storing numbers.

Calling card calls

See “Calling card” on page 27.

Emergency calls

See “Emergency calls” on page 34.

Ending a call

If

Keypad cover setting

is active, simply close the keypad

cover. Otherwise, press

ô

.

See “Using the keypad cover” on page 8.

Answering a call

The phone rings according to the
settings in the currently selected
profile

(see page 53)

.

If

Keypad cover setting

is active, simply open the keypad
cover to answer the call. Otherwise, press any key
except

ô

or

ð

Note: If Keyguard is on (see page 10), only ó answers calls.

See “Using the keypad cover” on page 8.

Want to stop your phone from ringing without
answering the call?

Press

ð

when the phone rings. This keeps you from

answering a call if it’s inconvenient to talk.

You can still answer the call if

Call

or the name of the

person who is calling is still flashing on your display.

If you don’t wish to answer the call, it will be forwarded to
your voice mailbox if you have a voice mail subscription.

See “Voice messages” on page 71 for details on your voice
mailbox.

10

Keyguard

This feature helps to prevent accidental key presses
(e.g. when

your

phone is in your pocket, in your purse)

by locking your keypad.

If any keys are pressed while
Keyguard is activated,

Press Unlock

and then *

will display.

Activating Keyguard

There are three different ways to activate Keyguard.

Keys locked

will appear on the display when activated.

• Press and hold ô

• Press

Menu

∗

• Press

Menu

9 at the start screen

Deactivating Keyguard

• Press

Unlock,

then

∗

Note: When Keyguard is

ON

, calls to the emergency number

programmed into your phone (e.g. by pressing 911 then

ó)

may be possible. However, Emergency key 9 doesn’t work.

Answering a call with Keyguard active

During an incoming call the keypad automatically
unlocks. However, you can answer a call only by
opening the keypad cover if it’s active; otherwise, press
only

ó

. After you end the call, Keyguard automatically

becomes active again.

Some notes about Keyguard

• Calls may be possible to the emergency number
programmed into your phone (e.g. 911 or other official
emergency number). The number is displayed only after
you have keyed in its last digit.

•Pressing the

ð key quickly turns lights on for 15 seconds.

• Keyguard is automatically turned off when the phone is
connected to a car kit.

11

4. Using Your Phone

The first few days you have your phone, play with it to
learn how the menu and submenu system works.
The more you learn how to access these menus and
submenus, the more fun you’ll have with your phone.

This section describes the different methods of using
your phone menus and submenus.

The display

Soft keys

Your phone has two soft keys located
below the display. The current
function is indicated by the texts
appearing directly above them.
Press the corresponding key under
the choice you wish to select.

This illustration shows the phone at the start screen

(see “What is the ‘start screen’?” on page 12)

. The start

screen always displays

Menu

on the left and

Names

on

the right.

Menu

allows you to access your phone’s

menus and submenus.

Names

allows you to access

your phone book

(see “Phone book” on page 49)

.

Scroll key

Your phone has a scroll key located just below the
display screen. The scroll key has two arrows on it that
look like

V

and W. Press these to navigate through your
phone’s menus and submenus, as well as through your
phone book

(See “Phone book” on page 49)

.

Scroll bar

When you access your phone’s menu and
submenus, you will notice a scroll bar at the far
right of the screen. This bar indicates your
location in the menu structure; each “tab” on the
bar represents a different menu item.

12

For example, press

Menu

once. The scroll bar appears
with the first (top) tab displayed. A different tab appears
each time you press the

W

or V key to move up and
down through the menu structure. The scroll bar works
the same way with submenus.

Menu & submenu numbering

When you scroll to a menu or submenu, the menu
number and/or submenu number appears on the
display above the scroll bar.

For example, when you scroll to menu 2 (

Call log

) the
number 2 appears in the top right-hand corner of the
display. If you scroll to menu 4 (

Settings

), submenu 3

(

Security settings

), your phone will display

4-3

in the top

right-hand corner.

See “Summary of menu items” on page 14 for a list of your
phone’s features along with their menu locations.

Also, see “Using shortcuts” on page 13.

What is the ‘start screen’?

The start screen appears when you first turn your phone
on, in its idle state.

When you want to get to the start screen, press

ô

at
any time except during a call (unless you want to hang
up).

Note: If you press ô when the phone is requesting input

(i.e., a setting, phone number, name, etc.), the phone displays
the start screen and the input is not saved.

Scrolling through the main menu

Press

Menu

at the start screen. Then press

W

or V to

reach the desired menu item.

Press

Select, Options or OK

(whichever appears) to

enter submenus and to choose options.

Press

Exit

to exit the present menu or

Back

to go back

one level.

13

Using shortcuts

This is a quick and easy way to access a menu without
having to scroll through other menus.

Press

Menu

, then menu number, then submenu

number.

Press the menu and submenu numbers within a couple
of seconds of each other when using this method.

For a summary of your phone’s menu structure, see “Summary
of menu items” on page 14.

Help text

If you’re not sure how a feature works, wait just a few
seconds and help text will appear for most of your
phone’s features. Press

More

to see the next page of

the text or

Back

to exit.

14

Summary of menu items

1Messages

1 1 Text Messages

1 1 1 Inbox
1 1 2 Write new
1 1 3 Outbox
1 1 4 Saved
1 1 5 Erase all

1 2 Voice messages

1 2 1 Listen to voice messages
1 2 2 Voice mailbox number

1 3 Welcome Note

2Call log

2 1 Missed calls

2 2 Dialed calls

2 3 Received calls

2 4 Clear call lists

2 5 Call timers

3 Profiles

3 1 Normal

(following submenus appear in all profiles)

3 1 1 Select
3 1 2 Customize

3 1 2 1 Ringing options
3 1 2 2 Ringing volume
3 1 2 3 Ringing tone
3 1 2 4 Vibrating alert (w/vibrating battery only)
3 1 2 5 Keypad tones
3 1 2 6 Warning and game tones
3 1 2 7 Message alert tone

3 2 Silent

3 3 Meeting

3 4 Outdoor

3 5 Pager

3 6 Car

(once used with car kit)

3 7 Headset (once used with headset)

15

4Settings

4 1 Call settings

4 1 1 Emergency key 9
4 1 2 Automatic redial
4 1 3 Calling card

4 2 Phone settings

4 2 1 Clock
4 2 2 Alarm clock
4 2 3 Touch tones
4 2 4 Restore factory settings
4 2 5 Language
4 2 6 Keypad cover setting

4 3 Security settings

4 3 1 Restrict calls
4 3 2 Access codes

4 4 Network services

4 4 1 Voice privacy
4 4 2 Call forwarding
4 4 3 Call waiting
4 4 4 Send own number
4 4 5 Network feature setting
4 4 6 NAM selection
4 4 7 Digital/analog selection

(may not appear in all systems)

4 4 8 Public system selection

(may not appear in all systems)

5System

5 1 Automatic

5 2 Manual

5 3 New search

6Games

6 1 Memory

6 2 Snake

6 3 Logic

6 4 Dice

7 Calculator

8Calendar

9 Keyguard

16

5. Features A to Z

ABC mode

This allows you to enter names into your phone book.

See “Entering letters and numbers” on page 35

.

Access codes

This is a security feature that allows you access to
certain phone features, such as the phone lock

(

page 52

)

and unlocked phone number

(

page 70

)

.

Also, see “Lock code” on page 42 and “Security code” on
page 62.

Alarm clock

The alarm clock operates off your
phone’s clock. The volume for the
alarm clock is determined by the
current ringing volume.

Note: If you have selected the

Silent

or

Beep once

ringing
option (see page 59), your alarm clock will quietly beep one
time.

See “Clock” on page 30 for information on your phone’s clock.

Setting the alarm clock

1.

Press

Menu

4 2 2 (

Settings

-

Phone settings

-

Alarm

clock

)

2.

Enter time you wish to set alarm (use two-digit
fields for hours and minutes). Existing digits will be
replaced with the new alarm time.

3.

Press

OK

4.

Select either am or pm and press

OK

Note: Step 4 appears only if you have selected am/pm format;
see “Selecting time format” on page 31 for more information.

When the alarm goes off

Press

Stop

to shut off the alarm.

17

Snoozing

Press

Snooze

.

The alarm will go off again in 10 minutes. If you let the
phone alarm for 1 minute without pressing a key, it
stops alarming for 10 minutes then starts again.

Turning the alarm clock off

Press

Menu

4 2 2 (

Settings

-

Phone settings

-

Alarm

clock

), then scroll to

Off

and press OK.

Note: If you have selected the

Silent

or

Meeting

profile, your
alarm will only beep once. The best profile to use while using the
alarm clock is

Normal

or

Outdoor

, unless these have been

modified from their original settings.

For more information on Profiles, see page 53.

All calls timer

This feature keeps track of how much time you have
spent on all calls with your phone.

See “Call timers” on page 24

.

Automatic answer

This is one of the settings in your phone’s Profiles

(see page 53)

. With this on, your phone answers

incoming voice calls after one ring.

Note: This can only be used when your phone is connected to
a headset or to an approved handsfree car kit equipped with the
ignition sense option, with the ignition on.

Activating automatic answer

1.

Press

Menu

3 (

Profiles

)

2.

Your phone lists each profile. Use

W

to highlight

either the

Car

or

Headset

profile and press

Options

.

Note:

Car

and

Headset

will not appear unless your phone has

already been connected to a car kit or headset at least one time.

3.

Highlight

Customize

and press OK. Press

W

to

Automatic answer

, then press

Select

again.

4.

Press

W

to On and press OK.

18

Automatic redial

Your phone will redial the number you’re trying to call up
to 3 times after you hear a quick, busy signal. Press

ô

to stop the call attempts.

This feature attempts to redial numbers that are busy
due to the wireless network. It will not redial numbers to
a busy party.

Activating automatic redial

Press

Menu

4 1 2 (

Settings

-

Call settings

-

Automatic

redial

), then press

W

or V to On and press OK.

Calculator

Your phone’s calculator adds,
subtracts, multiplies, divides, and
converts currency.

Remember! Your phone must be switched
on to use this feature. Do not switch on the
phone when wireless phone use is prohibited or when it may
cause interference or danger.

Using the calculator

1.

Press

Menu

7 (

Calculator

)

2.

Enter the first number in the calculation (press # for
decimals)

3.

To add, press ∗ (+ appears)
To subtract, press ∗∗ twice (- appears)
To multiply, press

∗∗∗

(* appears)

To divide, press

∗∗∗∗

( / appears)

To add a decimal, press the # key

4.

Enter the second number

Repeat these steps as many times as needed. Press

Clear

to erase any mistakes.

5.

Press

Options

. With

Equals

highlighted, press

OK

Note: You can also choose

Add, Subtract, Multiply

, and

Divide

from the list of options.

19

Storing exchange rate

1.

Press

Menu

7, then press

Options

2.

Scroll to

Exchange rate

and press

OK

3.

Press

W

or V at either

How many home units to a

visited unit

or

How many visited units to a home

unit

, depending on how you wish to convert the

currency. Press OK once you decide.

4.

Enter the appropriate exchange rate and press OK
(use the # key for decimals)

5.

Phone will display

Rate saved

Converting currency

1.

Press

Menu

7

2.

Enter number of units, then press

Options

3.

Press

W

or V to either

To home

or

To visited

, and

press

OK

4.

Converted currency is displayed

Calendar

The calendar keeps track of
birthdays, meetings, simple
reminders, and calls you need to
make. It can even sound an alarm
when it’s time for you to make a
call or go to a meeting.

Remember! Your phone must be switched on to use this
feature. Do not switch on the phone when wireless phone use
is prohibited or when it may cause interference or danger.

Note: Your phone must remain on to use the calendar’s alarm
feature. If your phone is off, the alarm will not sound at its
scheduled time.

Using the calendar

1.

Press

Menu

8 (

Calendar

)

2.

If you haven’t set the time and date, your phone
prompts you to set your phone’s clock

20

When your phone prompts you for the time with

hh:mm

, enter the time in hours and minutes

(using two-digit fields), then press

OK

Time format (24-hour or am/pm) is set using the Clock.
See “Selecting time format” on page 31.

When your phone prompts you for the date with

mm/dd/yyyy

, enter the month and day (using two­digit fields) and year (using a four-digit field), then
press OK.

Tip:

Use W to move the cursor right and V to move it
left. When you enter a digit, it writes over the number to
the right of the cursor.

3.

Your phone displays the current day. You can also

scroll to different days by pressing

W

or V.

4.

Once you’re at the date you want, press

Options

.

Then use

Wý

to highlight the option you want, and

press

Select.

The options are:

Option 1: View day

With this option, you can view the notes of the day
currently on display.

Use

W

to scroll through the notes. Each note allows you

to choose the following

Options

:

Erase

clears the note from your calendar.

Edit

gives you the same prompts you got when you
made the note.

Move

gives you the date prompt so you can move the

note to another date.

Option 2: Make note

With this option, you’ll need to choose

Reminder, Call

,

Meeting

, or

Birthday

. Your phone will prompt you for
more information depending on which one you choose.
You can also set an alarm for any calendar note.

See “Entering letters and numbers” on page 35 for help with
entering information at the

Subject:

prompt.

21

Note: When the alarm goes off, you can press

Postpone

or OK.

Press

OK

to shut off the alarm.

Option 3: Erase notes

With this option, you’ll need to choose which notes to
erase. If you choose all the notes for the day currently
on display (

Of Chosen Day

), or

One By One

(for all notes
in the calendar), your phone presents each note to you
with the option

Erase

or

Back

.

If you choose

All at Once

, your phone will delete all
calendar notes. When prompted to confirm the erase,
press

Yes

or No.

Option 4: View all

This allows you to view the notes of the entire calendar.
Use

W

or V to scroll through the notes.

Calendar memory

empty

will appear if there are no notes in the calendar.

Option 5: Go to date

Enter the date you wish to go to.

Option 6: Set the date

Enter the day and month (using two-digit fields) and
year (using a four-digit field), then press OK.

Call forwarding

This network service is used to forward incoming calls
to another number so you won’t miss an important call.
Check with your service provider for details.

Note: Before you can activate this feature, you should first store
the feature code given to you by your service provider.
Otherwise, this feature may not appear in the menu.

However, you can use the feature code manually, if you choose,
by including the feature code in front of the phone number
(e.g., *72 555 1212)

See “Network feature setting” on page 46 for more details.

22

1.

Press

Menu

4 4 2 (

Settings

-

Network services

-

Call

forwarding

)

2.

Scroll to desired call forwarding feature

(see options

below)

and press

Select

3.

Highlight

Activate

and press

OK

4.

Enter phone number at

Number:

(or press

Search

to

locate number in phone book) and press

OK

5.

Your phone will attempt to call the network to
confirm the feature code you entered in Menu 4 4 5
(

see “Network feature setting” on page 46

)

6.

Once the feature code had been confirmed, the
feature is activated

Call forwarding options

Forward all calls

forwards all incoming calls.

Forward if busy

forwards calls only when you’re on the

phone.

Forward if not answered

forwards calls if you don’t

answer.

Forward if out of reach

forwards calls if you are out of

the serving wireless network.

Cancel all call forwarding

cancels all call forwarding

options you have active.

Call log

This feature automatically keeps
track of numbers you’ve dialed,
numbers that have called you, and
the amount of time you’ve spent on
calls.

Using call log

1.

Press

Menu

2 (

Call log

)

2.

Scroll to one of the following options, then press

Select

or

OK

23

2-1

Missed calls

-

See page 45

.

2-2

Dialed calls

-

See page 32

.

2-3

Received calls

-

See page 56.

2-4

Clear call lists

-

See page 29.

2-5

Call timers

-

See page 24.

Tip:

You can dial any of the phone numbers by pressing

ó

while the number is on the display.

The ‘Options’ soft key

When you access

Dialed calls, Received calls

, or

Missed

calls

and press

Options

, a list of options will appear on

your phone’s display.

Call time

shows the date and time when the call was

first connected (if clock has been set)

Edit number

allows you to edit the dialed number.

Save

allows you to save the number into your phone

book.

Erase

will erase the number from the call list.

View number

will appear only if the number has been
stored in the phone book and the name is displayed
instead of the number.

Call restrictions

This feature allows you to restrict incoming and
outgoing calls to and from certain numbers.

See “Restrict calls” on page 56 for details.

Call settings

This feature allows you to access and activate some of
your phone’s features.

Using call settings

1.

Press

Menu

4 1 (

Settings

-

Call settings

)

2.

Press

W

to reach one of the following options, then

press

Select

24

4-1-1

Emergency key 9

-

See page 35

.

4-1-2

Automatic redial

-

See page 18

.

4-1-3

Calling card

-

See page 27

.

Call timers

Your phone automatically keeps
track of the amount of time you’ve
spent in calls.

1.

Press

Menu

2 5 (

Call log

-

Call

timers

)

2.

Scroll repeatedly to access the following options

Last call

displays call duration of last call.

All calls

displays call duration of all calls made since

timers have last been reset

(see page 30 for details

on how to clear call timers)

.

Life timer shows duration of all calls; this can not be
reset

(see page 42

).

Clear timers

clears all call timers except the Life

timer

(see page 30)

.

These call durations are for the currently-selected NAM
(phone number). Your phone has separate timers for
each NAM your phone uses, except for the Life timer.

See “NAM selection” on page 45 for details on NAM.

Note: The actual time invoiced for calls by your service provider
may vary, depending upon items such as network features,
rounding off for billing, and taxes.

Call waiting

If you have subscribed to Call Waiting, your phone will
beep during a call let you know you have an incoming
call. Your phone may also display the incoming caller’s
identification

(see “Caller ID” on page 27)

.

Answering an incoming call with call waiting

Press

ó

25

Swapping between two calls

Press

ó

Ending the calls

Press

ô

to end both calls

Activating call waiting

You can also activate this feature with your phone;
simply ask your service provider for the feature code,
store it into your phone, then activate it.

Note: This feature may not appear in your phone’s menu until
the feature code has been stored.

See “Network feature setting” on page 46 for more details.

1.

Press

Menu

4 4 3 (

Settings

-

Network services

-

Call

waiting

)

2.

Scroll to

Activate

(or select

Cancel

to cancel and

press

OK

3.

Your phone will attempt to call the network to
confirm the feature code you entered in Menu 4 4 5
(

see “Network feature setting” on page 46

)

4.

Once the feature code had been confirmed, the
feature is activated.

Caller groups

You can create groups of names in your

Phone book

(see page 49

)

, and give each group a different ringing
tone. Then you’ll know when someone from that group
is calling you because of the way the phone rings.

Adding names to a caller group

Note: The names and numbers that you add to a group must
already be stored in your phone book. See “Storing a name and
number” on page 50.

1.

With the display clear, press

W

until you see the

name or number you want, or choose

Name

and

then press

Search

.

2.

Press

Details

, if shown, or skip to Step 3

26

3.

Press

Options

4.

Use

W

to reach

Caller groups

. Press

Select

.

5.

Use

W

to reach the group to which you want to add

this name or number. Press

Select

.

Defining a ringing tone for a caller group

1.

With the display clear, press

Names

2.

Press

W

to reach

Caller groups

. Press

Select

3.

Use

W

to reach the group you want. Press

Select

4.

Press

W

until you see

Group ringing tone

. Press

Select

. Use

W

to reach the tone you want to hear

when anyone from this group calls you. Press OK.

Tip

: You can set your phone to ring

only

when people
from certain caller groups call you, and to otherwise be
silent.

See the “Caller group” description under “Ringing options” on
page 59.

Renaming a caller group

1.

Follow steps 1-3 in

“Defining a ringing tone for a

caller group”

2.

Press

W

until you see

Rename group

. Press

Select

.

3.

Enter the group name

(see “Entering letters and

numbers” on page 35 for details)

and press

OK

Removing names from a caller group

1.

Follow steps 1-4 in

“Adding names to a caller group”

2.

Use

W

to reach

No group

. Press

Select

.

Caller group graphics

When someone calls you from a particular caller group,
your phone can display a graphic to identify which caller
group that person is calling from.

1.

Press

Names

, scroll to

Caller groups

, then press

Select

27

2.

Scroll to the caller group you wish to display the
graphic for and press

Select

3.

Scroll to

Group graphic

and press

Select

4.

Scroll to On to display the graphic that goes with
that particular caller group

Caller ID

Caller ID is a network service that can display the name
and phone number of the person calling you, if the
information is available. Contact your service provider
for details.

If the caller can be identified,

the

phone may display the
caller’s name and phone number. The information
displayed depends on the information available through
the network and your phone book. It is possible that
only the name or the number will appear.

Call - caller ID unavailable

will display when the wireless
network doesn’t recognize the calling number.
Also,

Call - caller ID blocked

may display if the calling

party has blocked caller ID.

Calling card

If you wish to use a calling card for
long distance calls, you must first
store your calling card information
into your phone. Your phone can
store up to four calling cards.

Storing your calling card

1.

Press

Menu

4 1 3 (

Settings

-

Call settings

-

Calling

card

)

2.

Scroll to desired calling card and press

Options

3.

Press

W

or V to

Edit

, press

OK

4.

Enter security code and press

OK

5.

Press

Select

at

Dialing sequence

. Select the dialing

sequence your card uses (use chart below), press

W

or V to choose sequence, then press

Select

28

Note: The order of the following steps may vary, depending on
which dialing sequence your card uses.

6.

Enter access number when prompted for the
calling card’s access number (usually the 1-800
number listed on the back of the calling card),
press

OK

Note: You can also retrieve the access number from your phone
book if it has already been stored. Simply press

Search

, then W

or

V to find the number.

7.

Enter card number and/or PIN when prompted to
enter calling card number and personal
identification number, then press

OK.

Press OK

again at

Save changes

?

8.

Press

W

or V to

Card name

and press

Select

. Enter

card name using your phone’s keypad, press OK.

See “Entering letters and numbers” on page 35 if you need
help on entering the card name

For details about your phone’s security code, see “Security
code” on page 62.

*These calling cards are frequently used with these dialing
sequences. However, they may vary and are subject to change
at the phone company’s discretion.

Dialing

Sequence

Use for cards that

require you to:

Cards using

this

sequence

*

Access no.
+ phone no.
+ card no.

Dial 1-800 access number,
then phone number, then card
number (+ PIN if required)

MCI, AT&T True
Choice, Sprint
Canada, Unitel

Access no.
+ card no.
+ phone no.

Dial 1-800 access number,
then card number (+ PIN if
required), then phone number

networkMCI,
WorldPhone MCI

Prefix
+ phone no.
+ card no.

Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required)

GTE, PacBell,
AT&T, St entor

29

Choosing a calling card to use

1.

Press

Menu

4 1 3 (

Settings

-

Call settings

-

Calling

card

)

2.

Scroll to desired card and press

Options

3.

Press

W

or V to highlight

Select

and press OK.

4.

Enter security code at

Security code:

, press

OK

5.

Your phone will display

Card ready for use

Making calling card calls

1.

Enter the phone number, including any prefix (such
as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card
for instructions.

2.

Press and hold

ó

for a few seconds until your

phone displays

Card call

.

3.

Listen for the tone, then press OK. (Your phone will
display

Wait for tone, then press OK)

4.

Listen for the tone again, then press OK. (Your
phone will display

Wait for tone, press OK again

.)

Note: This procedure may not apply to all calling card options
programmed into your phone. Please look at the back of your
calling card or contact your long distance company for more
information.

Change lock code

This feature allows you to change your lock code.

See “Changing your lock code” on page 43

.

Change security code

This feature allows you to change your security code.

See “Changing your security code” on page 62.

Clear call lists

This feature will clear all dialed numbers, as well as
numbers of answered calls and missed calls. You can
not undo this operation, so be careful.

30

Also, see “Call log” on page 22.

1.

Press

Menu

2 4 (

Call log

-

Clear call lists

)

2.

Highlight either

All, Missed, Dialed

, or

Received

and

press OK (

All

will clear all call lists, while the others

clear their respective call lists)

Clear timers

This feature clears all call timers for the currently-selected
NAM.

See “Call timers” on page 24 for more details.

1.

Press

Menu

2 5 4 (

Call log

-

Call timers

-

Clear timers

)

2.

Enter security code at

Security code:

and press

OK

Careful

: Clearing call timers can not be undone. If you are

using the call timers to log or track the amount of time you are
using your phone, you may wish to record the call timers before
you erase them.

Note: The Life timer contains important warranty information
and can not be reset. See “Life timer” on page 42 for details.

Clock

Your phone has an internal clock
that can be displayed or hidden.
It also features an alarm clock

(see page 16)

.

Note: The clock is powered by your
phone’s battery. If your clock has been activated and you
remove the battery while your phone is still on, you will need to
reset the time after you turn your phone back on.

However, if you first turn your phone off before removing the
battery, your phone will retain the time and date it had before the
battery was removed.

Setting the clock

1.

Press

Menu

4 2 1 (

Settings

-

Phone settings

-

Clock

)

2.

Scroll to

Adjust time

and press

Select

3.

Enter present time at

Time:

(use two-digit fields for

hours and minutes)

31

4.

Press

OK

5.

Select am or pm and press OK (if am/pm format has
been selected; see below)

Selecting time format

1.

Press

Menu

4 2 1 (

Settings

-

Phone settings

-

Clock

)

2.

Scroll to

Time format

and press

Select

3.

Scroll to either

24-hour

or

am/pm

4.

Press

OK

Displaying or hiding the clock

1.

Press

Menu

4 2 1 (

Settings

-

Phone settings

-

Clock

)

2.

Scroll to either

Hide clock

or

Display clock

(only one

will display depending on the current setting)

3.

Press

Select

Conference call

This feature allows you to add a third party to a call. You
can use this feature with local and long distance calls.

Note: This feature may not be available in all wireless systems.
See your service provider for details and availability.

Making a conference call

1.

While in a call, enter (or recall from the phone book)
the second phone number and press

ó

2.

Once the third party answers, press

ó

to

connect all three parties

3.

Press

ó

again if you wish to disconnect the third

party. Press

ô

to drop both parties.

Recalling a number from the phone book during
a conference call

1.

During the call, press

Options

2.

Scroll to

Names

and press

OK

32

3.

Press

Select

at

Search

4.

Enter name and press OK, or just press

W

or V to

scroll through the phone book

5.

Press

ó

Current call timer

This feature displays the running elapsed time on your
screen while a call is active. Once the call has ended,
simply press any key to clear the display.

Also, see “Call timers” on page 24.

Activating the current call timer

Press

Menu

2 5 (

Call log

-

Call timers

) and press

Details

.

With

Current call timer

displayed, press

Select

, scroll to

On

, and press

OK

Customer care contact number

With the press of a single button, you can quickly
attempt calls to your service provider. This feature can
be helpful if you’re having difficulties dialing a number,
especially when traveling outside your home area.

Simply press and hold the 2 key and your phone will
attempt to call a customer care operator in the area.

Note: This may not be available on all systems. Contact your
service provider for availability.

Customize profiles

This feature allows you to customize individual Profiles.

See “Profiles” on page 53 for details.

Dialed calls

Your phone automatically stores the
last 10 numbers you’ve dialed.

1.

Press

Menu

2 2 (

Call log

-

Dialed

calls

)

33

2.

Press

W

or

V

to scroll through dialed numbers list

3.

Press

ó

to dial the number you wish to call

You can also access the last 10 dialed numbers if you
press

ó

, then quickly press W or V to scroll through

the list.

Also, see “Call log” on page 22 for details on other call lists.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23.

Digital/analog selection

Note: This feature will not appear in your phone until needed.
Please contact your service provider for details.

The feature allows you to select whether your phone
uses an analog or digital network. The network can
always override your setting, however, and the network
you choose must be available.

Selecting either analog or digital

1.

Press

Menu

4 4 7 (

Settings

-

Network services

-

Digital/analog selection

)

2.

Press

W

or V to one of the following:

Digit. & analog

Allows your phone to first search for a
digital network to place a call. If one is not available, it
will then search for an analog network.

Analog

Your phone will place calls only in an analog

network.

Digital

Your phone will place calls only in a digital

network.

3.

Press

OK

The phone resets itself to

Digit. & analog

when you

switch the phone off and back on.

34

Earpiece volume

The scroll keys on

your

phone will adjust the earpiece
volume during a phone call. The top scroll key increases
while the bottom one decreases the volume.

If an accessory like a headset or a car kit, or one with its
own loudspeaker, is connected to your phone, the scroll
keys will adjust the volume for that accessory.

Note: Using the scroll keys to adjust earpiece volume functions
only during phone calls.

Emergency calls

Before attempting any emergency calls, see “Emergency Calls”
on page 83 for important safety information.

1.

If the phone is not on, switch it on

2.

Press the

ô

key to ready the phone for calls.

(Press it twice if there are still digits on the display.)

3.

Key in the emergency number for your present
location (e.g. 911 or other official emergency
number). Emergency numbers vary by location.

4.

Press

ó

IMPORTANT!

This phone, like any cellular phone, operates using radio
signals, cellular and landline networks, as well as user­programmed functions which can not guarantee connection in
all conditions. Therefore, you should never rely solely upon any
cellular phone for essential communications (e.g., medical
emergencies).

Remember, to make or receive any calls, the phone must be
switched on and in a service area with adequate cellular signal
strength.

Emergency calls may not be possible on all cellular phone
networks or when certain network services and/or phone
features are in use. Check with local cellular service providers.

If certain features are in use (keyguard, restrict calls, etc.), you
may first need to turn those features off before you can make an
emergency call. Consult this document and your local cellular
service provider.

35

When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember
that your cellular phone may be the only means of communication
at the scene of an accident - do not cut off the call until given
permission to do so.

Emergency key 9

With this feature on, the phone attempts to make an
emergency call when you press 9, then

ó

. The phone
dials the emergency number pre-programmed into your
phone.

Note: You can also dial an emergency call by pressing and
holding 9 until the phone indicates it is attempting to make an
emergency call. However, this method does not work when
Keyguard is active or when the phone is connected to a
modem.

Activating Emergency key 9

Press

Menu

4 1 1 (

Settings

-

Call settings

-

Emergency

key 9

), scroll to On to activate or

Off

to cancel, then

press OK.

IMPORTANT!

Official emergency numbers vary by location (e.g. 911). Only
one emergency number is programmed into your phone to be
dialed automatically by Emergency key 9, which may not be the
proper number in all circumstances.

Entering letters and numbers

You can enter letters, as well as numbers, when storing
information into your phone by using your phone’s
keypad. When you see the letter you wish to enter,
simply press the key associated with that letter until it
appears on the display (numbers also appear).

ABC mode

When you need to enter letters into your phone, it will
automatically switch over to mode.

36

Your phone displays the icon to indicate that your
phone is in ABC mode. It also displays when you are
viewing names rather than numbers.

When is displayed, you can enter these
characters (see below):

While you’re editing a name, the

V

key will move the

cursor to the left, and

W

will move it to the right.

Press

Clear

to correct any mistakes.

If you wish to enter an empty space between
characters, press 0 for each space.

Changing letter case

Press the # key to switch between upper and lower
case letters. The icon will switch to to
indicate you are using lower case.

123 mode

When storing names to the phone book, you can enter
a number within a name at any time. Simply press that
particular number key a few times until it appears.

However, you can do this more quickly by accessing the

mode, without having to scroll through each letter

to access the number you wish to enter.

Key Characters Key Characters

1.,’?!-1 7PQRS7

2ABC2 8TUV8

3 DEF3 9 WXYZ9

4 GHI4 0 Enters an empty space, 0

5JKL5

∗

(See next page)

6 MNO6 # Changes letter case; long

press toggles between
ABC/abc and

123

mode

37

Simply press the # key for about 2 seconds while in

mode and the icon will appear. While in this
mode, only numbers can be entered. Letters can not be
entered unless your phone is in mode.

Press the # key again for a couple of seconds if you
wish to deactivate the mode.

Special characters (for storing names)

When in ABC mode

(see page 16)

, you can press the ∗
key and the following special characters will appear. You
can use these characters to help when storing names
in your phone book. Simply press

W

or V to highlight the

one you wish to use and press

Insert

.

. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥

TIP

: If you wish to access a special character that

appears toward the end of this list, press

V

for quicker

access.

Special characters (for storing numbers)

The following special characters are helpful when you
store names to your phone book

(see page 49)

. Simply
press the * key once or repeatedly, and the following
characters can be stored within the number sequence.

(p) creates a pause when a number is dialed; the
digits located to the right of the “p” are
automatically sent as touch tones after a 2.5
second pause

(see page 69)

.

(w) creates a “wait” when a number is dialed.
The “w” makes your phone wait for you to press

Send

or

ó

, then it sends the digits located to the

right of the “w” as touch tones

(see page 69)

.

You can add as many special characters as you need in
a single number sequence. These characters can not
be entered while in mode.

38

Erasing stored names and numbers

See “Erasing stored names and numbers” on page 51.

Erasing your entire phone book

See “Erasing your entire phone book” on page 52.

Games

You have four exciting games to choose from in your
phone. Press

Menu

6 to choose one of the following

games:

REMEMBER! Your phone must be switched on to use this
function. Do not switch on the phone when wireless phone use
is prohibited or when it may cause interference or danger.

Memory

Reveal pictures to find pairs in as few tries as possible.
Move the cursor with the 2 (up), 4 (left), 6 (right), and 8
(down) keys. Press the 5 key to reveal pictures. Press
the # key to jump right over revealed pictures or move
from top left to bottom right. Press the ∗ key to jump left
over revealed pictures or move from bottom right to top
left. Once found, pairs stay visible.

Snake

Feed the snake with as many goodies as possible and
watch it grow. Use keys 2, 4, 6, and 8 to turn the snake
toward food. The longer the snake’s tail grows, the
higher the score. If the snake hits its own tail or the
surrounding wall, the game is over.

Logic

Find a secret combination of figures. Available figures
are shown at the top of the display before you accept
the first guess row. Use the 2, 4 and 8 keys to move the
cursor and the 5 key to select the figure. To copy a
figure from a previously accepted guess row, start
scrolling with the 4 key, move the cursor to the desired
figure in the normal way and accept the selection with
the 5 key.

39

Once you think you have the right combination, press
the * key. The result is presented as a set of marks over
the row. A correct figure in the right place gives a full
mark; a correct figure in the wrong place gives a half
mark. The game ends when all the figures are correct
and in the right place.

Dice

Use this to play other games that require a set of dice if
one isn’t available. Use the

Level

option to set the
number of dice, up to six. You can roll, lock, and unlock
each die as many times as you wish.

When you start a new game, the dice roll for a couple of
seconds and then stop. Use the 4 (left) and 6 (right) keys
to select a die. Press the 5 key to lock or unlock the
selected die.

Press ∗ to roll the unlocked dice again.

Game options

When you select a game, you can choose from the
following submenus:

Level

allows you to choose the level of difficulty.

New game

starts a new game.

Top score

will display the top score (

does not appear in

Logic

).

Instructions

will describe how the game is played.

Note:

Last view

or

Continue

may appear in the options list if a

game is interrupted, not finished, or if you have lost the game.

Inbox

When you receive a text message, it’s stored in the
Inbox. Your phone will display

Message received

, along
with the text message icon, and makes a sound
(

depending on the message alert tone; see page 44

).

Please see “Text messages and pages” on page 65 for
complete details on this feature.

40

In-call menu

While in a call, you may notice the

Options

soft key.
Pressing this will access you to the in-call menu, and
you may notice the following choices:

Touch tones

You can manually enter a touch tone string

or search for one in your phone book

(see “Phone book”

on page 49)

New call

You can make a third party conference call

(see “Conference call” on page 31)

Menu

Allows you access to your phone’s menu

Names

Allows you access to your phone book

(see “Phone book” on page 49)

Mute

Allows you to mute the microphone; if your

microphone is already muted, this will change to

End

mute

(see “Microphone” on page 44)

Keyguard

This feature helps protect the keypad against accidental
keypresses.

See “Keyguard” on page 10 for complete details.

Keypad cover setting

This feature activates the keypad cover if you wish to
answer and end calls with the keypad cover.

See “Using the keypad cover” on page 8 for details.

Keypad tones

This is one of the settings in your phone’s Profiles
(

see page 53

). It sets the volume of the tone you hear

when you press your phone’s keys.

Note that if you choose the

Silent

profile, keypad tones

will be turned off.

Setting the keypad tones

1.

Press

Menu

3 (

Profiles

)

41

2.

Your phone lists each profile. Use

W

to highlight the
one you want to set the keypad tones for and
press

Options

.

3.

Highlight

Customize

and press OK. Press

W

to

Keypad tones

and press

Select

4.

Press

W

to scroll through the options; your phone
plays a sample of each. Press OK for the one you
want.

Language

Because many wireless phone
customers speak English as a
second language, your phone
allows you to choose your phone’s
displayed language.

Choosing a language for your phone

Press

Menu

4 2 5 (

Settings

-

Phone settings

-

Language

),

scroll to the language you wish to use and press OK.

You can choose from English, French, Spanish,
Portuguese or Traditional Chinese.

Last call timer

This feature displays the duration of your last call.

See “Call timers” on page 24.

Last number redial

When you want to call your last dialed number,

Press

ó

and wait 3 seconds

Note: You must be at the start screen before you press ó

Letter case

You can change from upper to lower case when
entering letters into your phone.

See “Changing letter case” on page 36 for complete details.

42

Life timer

The life timer displays the total time of all calls dialed and
received with your phone (in hours and minutes only).
The life timer can not be reset and is used in conjunction
with your phone’s warranty

Also, see “Call timers” on page 24.

Lights

This is one of the settings in your phone’s

Car

Profile

(

see page 53

). This feature determines whether the

lights are on only when you use your phone, or if they
are on at all times. This setting works only when your
phone is connected to a car kit.

1.

Press

Menu

3 (

Profiles

)

2.

Your phone lists each profile. Use

W

to highlight

Car

and press

Options

.

Note:

Car

will not appear in the list until the phone has been

connected to a car kit at least once.

3.

Highlight

Customize

and press OK. Press

W

to

highlight

Lights

and press

Select

.

4.

Use

W

to scroll through your choices and press

OK

If you select

Automatic

, your phone’s lights are turned
off within fifteen seconds if no keys are pressed. If On is
selected, then the lights will remain on the entire time
your phone is connected to the car kit.

Listen to voice messages

This feature allows you to access your voice messages.

See “Voice messages” on page 71 for complete details.

Lock code

You’ll need the lock code to activate and deactivate
Phone Lock (see

page 52

), or to change your lock
code. The default lock code is 1234. If you enter an
incorrect lock code five times in a row,

your

phone will

prompt you for the security code (see

page 62

).

43

Changing your lock code

In a lock code, only numeric characters are accepted.

1.

Enter

Menu

4 3 2 3 (

Settings

-

Security settings

-

Access codes

-

Change lock code

)

2.

Enter lock code at

Enter lock code:

and press

OK

3.

Enter new lock code, press

OK

4.

Verify new lock code, press

OK

Note: When you change your lock code, make sure you store it
in a safe place, away from your phone. Avoid entering access
codes similar to emergency numbers to prevent accidental
emergency calls.

Manual touch tones

This setting determines how long touch tones are
produced as you press the keys on the keypad. Note
that touch tones are sometimes called DTMF tones.

See “Touch tones” on page 69 for details.

Setting manual touch tones

Press

Menu

4 2 3 1 (

Settings

-

Phone settings

-

Touch

tones

-

Manual touch tones

) and highlight one of the

following options, then press

OK.

Continuous

means the tone sounds for as long as

you press and hold the key.

Fixed

sets the tone length to .1 second, regardless

of how long you press the key.

Off

turns the tones off, and no tones will be sent

when you press the keys.

Memory status

This feature allows you to see how many free and in-use
memory locations are in your directory.

Also, see “Phone book” on page 49.

Press

Names

, scroll to

Options

and press

Select

.

Then scroll to

Memory status

and press

Select

again

44

Messages

This feature allows you to access your voice and text
messages, as well as composing your own welcome
note.

Using messages

1.

Press

Menu

1 (

Messages

)

2.

Scroll to one of the following options, then press

Select

1-1

Text messages

-

See page 65

.

1-2

Voice messages

-

See page 71

.

1-3

Welcome note

-

See page 73

.

Message alert tone

This is one of the settings in your phone’s Profiles
(

see page 53

). It sets the tone that your phone makes

when you get a text message.

Also, see “Text messages and pages” on page 65.

1.

Press

Menu

3 (

Profiles

)

2.

Your phone lists each profile. Use

W

to highlight the
one you want to set the message alert tone for and
press

Options

.

3.

Highlight

Customize

and press OK. Press

W

to

highlight

Message alert tone

, then press

Select

.

4.

Use

W

to scroll through your choices (your phone

plays samples) and press OK.

Microphone

You can mute and unmute your phone’s microphone
while a call is in progress. During a call, your phone’s
soft keys change from

Names

and

Menu

to

Options

and

Mute

.

Muting and unmuting your phone

You can mute the phone’s microphone during a call;
simply press

Mute

. To unmute the microphone, press

Unmute

.

45

If these texts are not available, press

Options

, scroll to

Mute

or

End mute

and press

Select

.

Muting and unmuting also affect the microphones of
any accessories connected to the phone.

Missed calls

Your phone will keep track of the last 10 calls you have
missed if you weren’t around to answer the call. Missed
calls will appear in your phone only if your phone was
turned on and in a service area when the call was missed.

If the display says ‘Missed calls’

Press

List

. To call back the displayed number, press

ó

. Press

Exit

to go back to the start screen.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23.

Checking the missed calls list anytime

Press

Menu

2 1 (

Call log

-

Missed calls

), then scroll

through the list.

This shows you the phone numbers of the 10 most
recent calls you’ve not answered.

When the

Forward if not answered

option in the Call

Forwarding feature

(see page 21)

is selected, your

phone treats the forwarded calls as missed calls.

Also, see “Call log” on page 22 for details on other call lists.

NAM selection

The service provider programs your phone with the
phone number and system information into your
phone’s memory when your phone is first activated.
This is called a Number Assignment Module (NAM).

For example, your phone can be activated in up to 3
different service areas (e.g. one in Dallas, another in
Chicago, and maybe one more in New York), each
giving your phone a different phone number or account.

46

Only one number can be active at a time. When you
select a phone number, you’re also selecting which
system you’re using as your home system

(see “System”

on page 64)

. The first phone number displayed with this

menu is the currently selected number.

Note: It may not be necessary to have three NAMs for your phone
if your service provider has service or roaming agreements for
each area in which you wish to use your phone. Contact your
service provider for details.

Selecting the NAM for your phone

Press

Menu

4 4 6 (

Settings

-

Network services

-

NAM

selection

), highlight the phone number you want to use

and press OK.

Note: You need at least one active number to make calls.
You can not change from one NAM to another during a call.

Network feature setting

Call forwarding

(page 21)

, Call waiting

(page 24)

and

Send own number

(page 63)

are network services

available through your service provider or dealer.

When you subscribe to any of these services, your
service provider or dealer gives you a separate feature
code to activate each service. Deactivation codes are
used to deactivate each service.

Once you store the appropriate code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate these services.

Each time you use a feature that requires a feature
code, that code is sent to the network to verify you’re
using the correct feature code.

Note: If your phone has more than one phone number
programmed, any feature codes stored will apply only to your
primary phone number, or NAM 1.

See “NAM selection” on page 45 for details on NAM.

47

Storing codes

1.

Press

Menu

4 4 5 (

Settings

-

Network services

-

Network feature setting

)

2.

At

Feature Code:

, enter the feature code or
deactivation code received from your dealer
(e.g. ∗74, ∗740, etc.), press

OK

3.

W

to the service that the code applies to and press

Select

4.

W

to suboption, then

Select

(Repeat step as

required, based on number of suboptions)

(Use step four only for call forwarding options)

5. W

to

Activate

or

Cancel

, then press

OK

Network services

Some of the features in this menu are network services
that require a subscription. See your service provider for
details and availability.

4-4-1

Voice privacy

-

See page 72

.

4-4-2

Call forwarding *

-

See page 21.

4-4-3

Call waiting *

-

See page 24

.

4-4-4

Send own number *

-

See page 63

.

4-4-5

Network feature setting

-

See page 46

.

4-4-6

NAM selection

-

See page 45

.

4-4-7

Digital/analog selection **

-

See page 33.

4-4-8

Public system selection **

-

See page 55.

*

These features will not appear in the menu unless they are

activated using

Network feature setting

. See “Network

feature setting” on page 46 for details.

**

These features appear in your phone’s menu only when

needed. Please contact your service provider for details.

48

One-touch dialing

This feature allows you to make phone calls quickly and
easily with the touch of a button.

You must store names and numbers in your phone
book (

see page 50

) before you can use this feature.
Then you can assign a name from the phone book to a
one-touch dial location using your phone’s keys 2
through 8.

Note: Keys 1 and 9 are used exclusively for dialing your voice
mailbox (see page 71) and for attempting emergency calls
(see page 83) to the emergency number programmed into your
phone (e.g. 911 or other official emergency number). The 2 key
is for dialing a customer care operator (see page 32), which can
be overwritten if you prefer.

Assigning one-touch dial locations

1.

Press

Names,

scroll to

1-touch dialing

and press

Select

2.

Scroll to next available empty location,

(empty)

will

appear, then press

Assign

3.

Scroll to select desired name and press

Select

4.

Repeat as necessary

Calling a number using one-touch dialing

Note: The 2 key is for dialing a customer care operator, which
can be overwritten if you prefer.

Press and hold the key (2 through 8) for a few
seconds to call the number in the corresponding
one-touch dial location.

Note: If you press and hold 1, your phone calls your voice
mailbox. If you press and hold 9, and Emergency key 9
(Menu 4 1) is

ON

, your phone attempts a call to the emergency
number programmed into your phone (e.g. 911 or other official
emergency number).

49

Changing numbers in one-touch dial list

With this feature, you can assign a different number to
any one-touch dial location.

1.

Press

Names,

scroll to

1-touch dialing

and press

Select

2.

Scroll to the location you wish to change and press

Options

3.

Scroll to

Change

, then press

Select

4.

Scroll through phone book to select new number
and press

Select

Erasing one-touch dial locations

1.

Press

Names,

scroll to

1-touch dialing

and press

Select

2.

Scroll to the location you wish to erase and press

Options

3.

Scroll to

Erase

, press

Select

, then press OK at

Erase?

Outbox

This is where all outgoing messages are stored.

See “Text messages and pages” on page 65 for more details.

Paging

You can receive pages with your phone.

See “Text messages and pages” on page 65.

Phone book

You can store up to 199 numbers and associated
names in your phone’s memory. These numbers are
right at your fingertips for easy dialing.

Things to know about the phone book

Stored numbers may be up to 32 digits long.

Stored names may be up to 16 characters long.

50

You can not store identical names into your phone
(i.e., John, John); make sure that like names are
somewhat different in the phone book (i.e., John,
Johnny).

Replace?

followed by the currently stored name displays

when storing a name already in memory.

Accessing the phone book

Press

Names

, scroll to desired submenu and press

Select

.

About the submenus

The phone book has several submenus from which you
can choose.

Search

allows you to search for a specific name.

Add new

allows you to enter new names and numbers.

Options

lets you choose your scrolling view, as well as

to show memory status.

1-touch dialing

allows you to assign up to seven one-

touch dial locations (

see page 47 for details)

.

Caller groups

allows you to rename or change the

ringing tone for a caller group

(see“Caller groups” on

page 25)

.

Erase all

lets you erase every name and number in your
phone book. You can erase one name and number at a
time by pressing

Details

, then

Options

when viewing a

name already in the directory.

Storing a name and number

1.

Press

Names

2.

Scroll to

Add new

and press

Select

3.

Enter name using the keypad
(use # to switch between
upper and lower case) and press

OK

51

4.

Enter phone number and press

OK

Also, see “Entering letters and numbers” on page 35 and
“Quick save” on page 64.

Changing a number stored with a name

1.

Recall stored name, then press

Details

to view

number

2.

Press

Options

, scroll to

Edit

and press

Select

3.

Press OK while name is displayed, unless you wish
to change it. If so, press and hold

Clear

, re-enter

name and press

OK

4.

Press and hold

Clear

to erase number or use the

W

and

V

keys to edit

5.

Enter new number

6.

Press OK to save new number

Recalling names & numbers

At the start screen, press

W

or V to view names in
directory. Then scroll to the person you wish to call and
press

ó

to dial the number (phone will display

number dialed to confirm).

Recalling numbers by name

At the start screen, press

Names

. Then press the
number on the keypad with the corresponding first
letter of the name you wish to call.

You can also recall numbers by name by pressing

Names

, then press

Select

at

Search

. Enter the name of

the person you wish to recall and press OK.

Erasing stored names and numbers

1.

Recall stored name

2.

Press

Details

3.

Press

Options

4.

Highlight

Erase

, then press

Select

, then

OK

Note: You can not undo Erase functions, so be careful!

52

Erasing your entire phone book

1.

Press

Names

2.

Scroll to

Erase all

and press

Select

3.

Press OK at

Are you sure?

4.

Enter security code at

Security code:

and press

OK

Warning: This feature will erase your entire phone book,
which can not be undone!

Phone lock

When you turn this on, your phone will lock after you
switch your phone off and back on. Then, each time you
turn your phone on, it will prompt you for a lock code
when you press either

Names

or

Menu

.

When the phone lock is on, you can not access most of
your phone’s memory and menu features, or make
phone calls without entering the lock code.

Turning on phone lock

Press

Menu

4 3 2 1 (

Settings

-

Security settings

-

Access

codes

-

Phone lock

). Enter the lock code then press OK.

Then scroll to On, and press OK again.

When your phone is locked, calls may be possible to
the emergency number programmed into your phone
(e.g. 911 or other official emergency number) including
calls with Emergency key 9 (

page 35

).

You can also store a number in the

Unlocked phone

number location

, which allows you to call this number even

though your phone is locked (s

ee page 70 for details)

.

Answering a call with phone lock on

Press any key except

ô

and ð

Turning off phone lock

Press

Menu

4 3 2 1 (

Settings

-

Security settings

-

Access

codes

-

Phone lock

). Enter lock code and press OK.

Then scroll to

Off

and press OK again.

53

With phone lock off, you can now use your phone
without entering the lock code each time you turn your
phone on.

Phone settings

Phone settings allow you access to other phone
features such as an alarm clock and your phone’s
language.

Using phone settings

Press

Menu

4 2 (

Settings

-

Phone settings

), then scroll to

one of the following options, then press

Select

:

4-2-1

Clock

-

See page 30

.

4-2-2

Alarm clock

-

See page 16

.

4-2-3

Touch tones

-

See page 69

.

4-2-4

Restore factory settings

-

See page 56

.

4-2-5

Language

-

See page 41

.

4-2-6

Keypad cover setting

-

See page 8.

Profiles

Now you can adjust and customize
your phone to whatever environments
you find yourself in (i.e. meetings, a
movie, etc.). With Profiles, you can
control your phone’s ringing volume,
ringing tone, message alert, keypad tones, warning
tones, etc., in a matter of seconds.

Note: Restore factory settings (see page 56) will reset any
changes made in Profiles back to the factory defaults.
The default setting is

Normal

.

Accessing Profiles

Press

Menu

3

54

Selecting different Profiles

If you want to change your phone’s Profile, quickly press
the

ð

key. Quickly press ð again to scroll through

each choice, then press and hold the

ð

key for a

second to select that Profile.

You can also scroll through the list of Profiles with a
quick press of the

ð

key. Then press W or V to choose

another Profile and press OK.

Either way, this only allows you to select other Profiles;
you can not customize them here. Keep reading to learn
how to customize a Profile.

Customizing Profiles

Press

Menu

3 (

Profiles

) and scroll to desired Profile, then

press

Options

.

Once

Options

is selected,

Select, Customize

and

Rename

will appear as your choices. Once you have selected
one of these items, press OK. If you wish to go back to
the main menu, press

Back

.

Select

activates the currently highlighted Profile.

Customize

allows you to customize a Profile by changing

the current settings.

Rename

allows you to rename the Profile.

When you select

Customize

, press OK and you’ll have
access to several lists and sub-menus that will enable
you to adjust the settings on the current Profile.

Note:

Car

and

Headset

will not appear in the Profiles list unless
your phone is connected to a car kit or a headset. However,
they will remain in the menu once connected for the first time.

Note: When you change a setting in the current Profile, it only
affects that Profile and will not change your phone’s normal
settings.

Renaming Profiles

1.

Press

Menu

3 (

Profiles

)

2.

Scroll to desired Profile and press

Options

55

3.

Scroll to

Rename

and press

OK

4.

Enter new name and press OK again

Note: Some profiles can not be renamed.

Public system selection

Note: This feature will not appear in your phone until needed.
Please contact your service provider for details.

In each service area there are usually two service
providers. The service provider you sign up with, also
known as your home system, is of type A or B. Systems
that are of the same type as your home system are
called “home-type” systems; systems that are of the
opposite type as your home system are called
“non-home-type” systems.

Public system selection allows your phone to search for
other available systems when service is not available in
your home system.

You can also request the order in which your phone
looks for available systems.

Note: Using

Home only

or

Any system

is usually the most

economical choice.

1.

Press

Menu

4 4 8 (

Settings

-

Network service

-

Public

system selection

).

2.

Scroll to one of the following choices:

Any system

The phone searches for service in a
home-type system and if service is not found it will
then search for a non-home type system.

Home type

The phone searches for a service in a

home-type system only.

Nonhome type

The phone searches for a service in
a non-home type system only (doesn’t find a home
system since it doesn’t search for a home-type
system).

Home only

Your phone uses its home system only

(that is, it will not roam).

3.

Press OK.

56

Received calls

This shows you the phone numbers of the 10 most
recent calls you’ve answered.

Press

Menu

2 3 (

Call log

-

Received calls

), then scroll

through the numbers.

Also, see “Call log” on page 22 for details on other call lists.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23

.

Restore factory settings

You can reset the settings of many of your phone’s
features to factory defaults (as in a new telephone).

Restoring factory settings

Press

Menu

4 2 4 (

Settings

-

Phone settings

-

Restore

factory settings

), enter security code and press OK.

Note: The memory, timers, language selection and security
code are not reset. However, any Profiles you have modified will
reset when you restore your settings.

Renaming profiles

See “Profiles” on page 53.

Restrict calls

This feature allows you to restrict incoming and
outgoing calls. Outgoing calls are restricted from a list of
restrictions that you create yourself.

Restrict outgoing calls

If no restrictions have been defined in your phone, you
will notice only one option:

Add restriction

allows you to create your own list of
outgoing call restrictions. The maximum number of call
restriction groups you can define is 10.

57

Once you have entered

Add restriction

and have added
at least one restriction, the following options will be
added:

Select

allows you to select call restrictions from the

outgoing calls list.

Edit

allows you to edit an existing outgoing call

restriction.

Erase

will erase any existing outgoing call restrictions.

Note: When calls are restricted, calls may be possible to the
emergency number programmed into your phone (e.g. 911 or
other official emergency numbers). However, Emergency key 9
may not operate depending on the type of restriction you
choose.

Adding call restrictions

1.

Press

Menu

4 3 1 (

Settings

-

Security settings

-

Restrict calls

)

2.

Scroll to

Restrict outgoing calls

and press

Select

3.

Enter the security code and press

OK

4.

Scroll to

Add restriction

to create an outgoing call

restriction and press

OK

5.

Enter the number string you wish to restrict and
press OK. For example:

If you wish to restrict all calls that begin with 1,
enter 1 (this will restrict all long distance calls)

If you wish to restrict all calls that begin with 1972,
enter 1972

If you wish to restrict all calls that begin with 214,
enter 214

6.

If you wish to enter a name for the call restriction,
enter the name using your phone’s keypad, then
press

OK

Restrict incoming calls

1.

Press

Menu

4 3 1 (

Settings

-

Security settings

-

Restrict calls

)

58

2.

Scroll to

Restrict incoming calls

and press

Select

3.

Enter security code, then press

OK.

4.

Scroll to

All calls

and press

Mark

(or press

Unmark

if you wish to remove the restriction)

5.

Press

Back

and then press

Yes

at

Save changes?

Selecting call restrictions

1.

Press

Menu

4-3-1 (

Settings

-

Security settings

-

Restrict calls

)

2.

Scroll to

Restrict outgoing calls

and press

Select

3.

Enter the security code and press

OK

4.

Scroll to

Select

and press

OK

5.

Scroll to each restriction you wish to use and press

Mark

; press

Unmark

to deactivate existing restrictions

6.

Press

Back

and then press

Yes

at

Save changes?

Editing call restrictions

1.

Press

Menu

4-3-1 (

Settings

-

Security settings

-

Restrict calls

)

2.

Scroll to

Restrict outgoing calls

and press

Select

3.

Enter the security code and press

OK

4.

Scroll to

Edit

and press

OK

5.

Scroll to the restriction you wish to edit, press OK

Note: If no name has been entered for a restriction, the
restricted number will be displayed

6.

Press and hold

Clear

to erase entire number, then

enter the new characters. Or use

Wý

or V to move
the cursor to the desired location and delete a
character or insert additional characters. Press OK
when finished.

7.

Edit name if desired using same procedure as above

Erasing call restrictions

1.

Press

Menu

4-3-1 (

Settings

-

Security settings

-

Restrict calls

)

59

2.

Scroll to

Restrict outgoing calls

and press

Select

3.

Enter the security code and press

OK

4.

Scroll to Erase and press

OK

5.

Scroll to the restriction you wish to erase, press

OK

6.

Press OK again to erase restriction

Ringing options

This is one of the settings in your phone’s Profiles

(see page 53)

. You can choose how your phone notifies
you of an incoming call. This setting does not affect
incoming text message alert tones

(see page 65)

.

Selecting ringing options

1.

Press

Menu

3 (

Profiles

)

2.

Your phone lists each profile. Use

W

to highlight the
one you want to set the ringing options for and
press

Options

.

3.

Highlight

Customize

and press OK. Press

W

to

Ringing options

, then press

Select

.

4.

Highlight either

Ring, Ascending, Ring once, Beep

once, Caller groups

, or

Silent

and press

OK

Caller groups

sets the phone to

Silent

except for calls

from people in selected caller groups

(see “Caller

groups” on page 25)

.

Press

W

or V to highlight the desired caller group(s),

then press

Mark

to select or

Unmark

to de-select them.

Ringing tones

This is one of the settings in your phone’s Profiles (

see

page 53

). It sets the ringing tone for incoming voice calls.

If you set

Ringing Options

(see page 59)

to

Silent

or

Beep

once

, ringing tones are automatically off.

Selecting ringing tones

1.

Press

Menu

3 (

Profiles

)

60

2.

Your phone lists each profile. Use

W

to highlight the

one you want to set the ringing tones for and press

Options

.

3.

Highlight

Customize

and press OK. Press

W

to

Ringing tones

, then press

Select

.

4.

Scroll through the options. After you hear the tone
you wish to use, press OK.

Ringing volume

This is one of the settings in your
phone’s Profiles

(see page 53)

.
It sets the default ringing volume for
incoming voice calls, message alert
tones and the alarm.

Setting the ringing volume

1.

Press

Menu

3 (

Profiles

)

2.

Your phone lists each profile. Use

W

to highlight the
one you want to set the ringing volume for and
press

Options

.

3.

Highlight

Customize

and press OK. Press

W

to

Ringing volume

, then press

Select

.

4.

Scroll through the options. When you hear the
volume level you wish to use, press OK.

Note: The ringing volume setting is stored individually for the
handsfree car kit and the headset.

Roaming

This is a term used to indicate that your phone is not in
its home area. Calls made or received while roaming are
usually more expensive than calls made in your home
area.

When roaming in some systems outside your home
area, your phone may not be recognized by the host
system (the one you’re travelling in) and you may not be
able to place a call.

61

Contact your service provider for more specific
information on how roaming works with your phone, as
well as any information on coverage limitations.

Roaming Indicators

When your phone begins roaming, it will beep once and
display

ROAM

or

EXTENDED AREA

, depending on how
roaming works with your phone. Contact your service
provider for more details. If your phone is not roaming
(i.e. in its home area) it will either display

HOME

or the

name of the service provider.

Saved

This is where saved text messages are stored.

See “Text messages and pages” on page 65 for details.

Scrolling view

There are three different options on how you can view
the phone book. Your choices are:

Name list

shows all stored names in a scrolling list. Three
names will appear at any given time. To view other names
in the directory, scroll back and forth through the list using

W

or V.

Name list

is the default setting.

Name+number

displays individual names and numbers
stored in your directory. Only one name will display on
your screen at a time, with the corresponding phone
number. Use

W

or V to view other names.

Name only

shows individual names only. To view other

names, use

W

or V. You can view the corresponding

phone number by pressing

Details

, then

W

or V.

Selecting your scrolling view

1.

Press

Names

2.

Scroll to

Options,

then press

Select

3.

Press

Select

at

Scrolling view

4.

Press

W

or V to select either

Name list

,

Name+number

, or

Name only

, then press

OK

62

Security settings

This menu includes the following security features:

4-3-1

Restrict calls

-

See page 56

.

4-3-2

Access codes

-

See page 16

.

The

Access codes

submenu includes

Phone lock

(page 52)

,

Unlocked phone number

(page 70)

,

Change lock code

(page 43)

, and

Change security code

(page 62)

.

Security code

Your phone will prompt you for a security code for
certain features. These features can be used only after
the correct security code has been successfully
entered.

Note: When entering your security code, ***** will appear on the
display to keep others from viewing your code.

If you make a mistake entering the code, erase the last
digit entered by pressing

Clear

, or press and hold

Clear

.

Then enter the correct code or press

Back

to exit the

current feature.

If you enter an incorrect security code (

Code error

will
appear) five times in a row, your phone won’t accept
any entries for the next five minutes.

Your phone’s default security code is 12345. It’s highly
recommended that you change this code at once, write it
down, and store it in a safe place away from your phone.

Changing your security code

1.

Press

Menu

4 3 2 4 (

Settings

-

Security settings

-

Access codes

-

Change security code

)

2.

Enter security code and press

OK

3.

Enter new security code at

Enter new security

code:

, press

OK

4.

Enter new security code again at

Verify new

security code:

, press

OK

5.

Phone will display

Security code changed

63

Note: If you have changed your security code and don’t
remember the new code, contact your service provider. Once
you have changed your security code, the default setting is no
longer valid.

Send own number

In most service areas, when you call someone your
name will be presented to his/her caller ID (if they
subscribe). This feature allows you to block their caller
ID (i.e. your number will not be presented) when you call
them. This feature works on a per-call basis. Contact
your service provider for more details.

Note: Before you can deactivate this feature, you must first
store the feature code given to you by your service provider.
Otherwise, this feature may not appear in the menu. See
“Network feature setting” on page 46 for more details.

Note: This feature is only effective when calling to a number that
is equipped with Caller ID.

1.

Press

Menu

4 4 4 (

Settings

-

Network services

-

Send

own number

)

2.

W

to

Yes

(to show your number) or No (to not show

it) and press

OK

3.

Enter the number you wish to call (or press

Search

to retrieve the number from the phone book and
press OK), then press

OK

4.

Your phone will attempt to call this number with the
feature code you stored in Menu 4 4 5

(see

“Network feature setting” on page 46)

Settings

This main menu allows you access to other features.
See these individual entries for more information.

4-1

Call settings

-

See page 23

.

4-2

Phone settings

-

See page 53

.

4-3

Security settings

-

See page 62

.

4-4

Network services

-

See page 47

.

64

Storing a name & number

You can save names and numbers in the Phone book.
Either use the method described in

“Storing a name and

number” on page 50

or the “quick save” method

described below.

Quick save

Enter the phone number and press

Save

. Enter a name

at

Name:

if you wish (optional), then press OK.

Also, see “Entering letters and numbers” on page 35.

System

Your phone is capable of working in Residential, Private,
and Public Systems (such as your Home System). You
can choose how your phone selects a network to use.

This feature is

Menu

5 in your phone. The default is

Automatic

, which means your phone automatically
searches for networks available to you and chooses the
appropriate one. Every time you switch on your phone,
it resets this to

Automatic

.

If you choose

Manual

, your phone searches for
networks, then begins displaying them. Your phone
displays

AVAILABLE:

or

NOT AVAILABLE:

for the

systems it finds (You can not use

NOT AVAILABLE:

systems). Use the

W

key to scroll through the choices,

and press OK when you see the one you want.

If you choose

New Search

, your phone begins a new
search for new Private and Residential systems. When
it finds the best new system, it displays it. You can then

Select it

, or start another search by pressing

Next

.

Note: If you have two phone numbers (two NAMs), the

Manual

and

New search

features are only used with your primary
phone number (NAM 1). See “NAM selection” on page 45 for
more information concerning NAMs.

65

To switch from private to public

If you are in a private system and want access to a
public system, press and hold

Menu

when you are not

in a call. Your phone will display

Search public systems?

,
press OK and your phone will use the public system for
the next (only once) outgoing call. After that it goes back
to

Automatic system selection

.

Text messages and pages

Before you can send or receive text messages and
pages, you must subscribe to the text messaging
network service.

Some or all of these features may not be available in
some wireless systems. Please see your service
provider for details and availability.

Note: Text messages that you receive with your phone may
appear different at times, due to messages that originate in
networks other than your own.

Also, the maximum length of a text message may depend on
the network’s capabilities.

Text message options

When you access

Text messages

, you will view a screen

with five different options.

Inbox

is where incoming messages are received and

stored. All new, unread messages are kept here.

Write new

allows you to write text messages.

Outbox

is where outgoing messages are stored.

Saved

is where all saved, read messages are kept.

Erase all

allows you to erase all text messages. However,

unread text messages will not be erased.

Erase all

can
be found quickly when you access Text messages by
pressing

V

.

66

Writing text messages

Note: Writing and sending text messages may not be available
in all wireless systems. Please contact your service provider for
details.

Sending text messages

1.

Press

Menu 1 1

2.

Scroll to

Write New

and press

Select

3.

Write your message using the keypad and press

Options

4.

To send the text message, press OK with

Send

highlighted

5.

Enter the phone number (or press

Search

to locate

in the phone book), then press

Send

Sending options

If you press

Options

when sending a text message,

you’ll find the following choices:

Send

sends the message

Settings

allows you to mark your messages (see below)

Save

will save your message to the Saved folder.

Clear screen

will clear the message screen.

Message settings

Urgent

will notify recipient that your message is important.

When you receive an

Urgent

message, the message will

be marked with an exclamation point (!) in front of it.

Read receipt

notifies you that the recipient has opened

your message.

Callback no

. will place your phone number within the

message. This is the default setting and it is set to on.

Receiving text messages

Your phone has space for up to 30 text messages,
depending on the length of each message.

67

When you receive a text message

Text messages are shown in the order that they were
received, in their order of priority.

Message received

indicates an unread message or page.
If more than one message is received, the number of
received messages will be listed first.

New emergency message

indicates that the message or
page received was sent by someone via the service
provider. Emergency messages are sent only in
situations where life and/or property are in immediate
danger. Emergency messages are listed first and will
override all other messages.

Urgent

messages are also high priority messages.

Reading text messages

With

Message received

displayed, press

Read

and scroll

to new message, then press

Read

again

Reading options

Press

Options

while a text message is displayed to

access the following reading options:

Read next

allows you to read the next message.

Erase

will erase the message.

Save

will save the message to the

Saved

folder.

Call back

will automatically call whoever sent the message

if any phone numbers are included within the message.

Forward

allows you to forward the message to someone

else.

Reply

allows you to reply to the received message.

Calling someone back in a message

Press

ó

while the message is displayed to dial the

number quickly.

Or, with the message and the phone number displayed
on your phone’s screen, you can press

Options

, scroll

and select

Call back

, then press OK.

68

Note: If more than one number is on the display, the numbers
are displayed in a list. Simply select the phone number you want
to call and press

ó. If no numbers are found, your phone will

display

No number found

on this screen

Forwarding a message

Note: This feature is only available if your phone has been
activated in a wireless system that supports the sending of
text messages.

With the message displayed, press

Options

, scroll to

Forward

and press OK. Then send the message as you

normally would.

Replying to a message

Note: This feature is only available if your phone has been
activated in a wireless system that supports the sending of
text messages.

With the message displayed, press

Options

, scroll to

Reply

and press OK. Then write your reply and send the

message as you normally would.

If a phone number appears in the message you received,
it’s used as the default for the reply you’re sending.
This can be replaced by another number, if you wish.

Receiving a page

Your phone displays

Message received

. The message

reads

Call:

, followed by the name or number of the
person who paged you. Names will appear only if that
person has been stored in the phone book.

When your phone’s memory is full

One or more messages, of lowest priority, will
automatically be deleted in order to receive new text
messages when your phone’s memory is full.

If the message memory is still full, your phone will
display

No space: message waiting

.

You can clear this

notification by pressing OK.

Note: Messages are usually deleted from your

Inbox

. An incoming

emergency message may delete messages from your

Saved

folder

.

69

Touch tones

Your phone can generate various sounds, called touch
tones, when the keys are pressed. These are also
known as DTMF tones.

Touch tones can be used for many automated, over-the­phone services such as checking bank balances, airline
arrival and departure times, and using voice mailbox
options. Touch tones can be sent only when a call is active.

Storing touch tone strings

Touch tone strings can be used for sending and
receiving information with your phone. For example, you
can store your office voice mailbox number, along with
your password for easy access to your messages.

Store touch tone strings the same way you store
phone numbers (

see page 50

).

You can store a whole digit sequence in your phone
book and send it as touch tones for frequently-used
strings of numbers.

Sending a touch tone string

Make sure Menu 4 2 3 1 (

Settings

-

Phone settings

-

Touch tones

-

Manual touch tones

) is not set to

Off

.

1.

During a call, press

Options

2.

Scroll to

Touch tones

and press

OK

3.

Enter touch tone string or recall string from the
phone book and press OK

Note: Use caution when sending confidential information over
the air when using DTMF tones in analog mode.

Storing touch tone strings with phone numbers

1.

Enter the phone number (e.g. your office voice
mailbox)

2.

Press

∗∗∗

(p) or

∗∗∗∗

(w)

3.

Enter the touch tone string (e.g. voice mailbox
password)

4.

Store the number as you normally would

70

Note: See “Special characters (for storing numbers)” on
page 37 for details on “p” and “w” characters.

When you dial this number, your phone first dials the phone
number, then waits (because of the “w” character) for you
to press

Send

. Your phone then sends your password.

If you include a “p” character instead of a “w”, your
phone pauses for 2.5 seconds, then automatically
sends your password as touch tones.

Touch tone length

This feature determines the length of each touch tone
when they are sent automatically.

Short

sets the tone length to .1 second.

Long

sets the

tone length to .5 second.

You can set the touch tone length by pressing

Menu

4 2 3 2 (

Settings

-

Phone settings

-

Touch tones

-

Touch

tone length

).

Unlocked phone number

When the phone lock is on

(see page 52)

, no calls can
be made. However, you can store one number into your
phone that can be called when it’s locked.

Storing the unlocked phone number

1.

Press

Menu

4 3 2 2 (

Settings

-

Security settings

-

Access codes

-

Unlocked phone number

)

2.

Enter lock code and press

OK

3.

Enter phone number at

Number:

(or press

Search

and scroll through the phone book)

4.

Press

OK

Calling the unlocked phone number

Note: Your phone must be locked to use this feature.

Press W or V once, then

ó

or you can manually

enter the phone number as it is stored and press

ó

.

71

Vibrating alert

This is one of the settings in your phone’s Profiles

(see page 53)

. When your phone has the vibrating
battery attached, you can set your phone to vibrate
when you receive a voice call.

Note: This setting will not appear in your phone unless a
vibrating battery has been attached.

Activating vibrating alert

1.

Press

Menu

3 (

Profiles

)

2.

Your phone lists each Profile. Use

W

to highlight the

one you want to set the vibrating alert for and press

Options

.

3.

Highlight

Customize

and press OK. Press

W

to reach

Vibrating alert

, then press

Select

again.

4.

Use

W

to highlight On or

Off

and press OK. If you
choose On, your phone will vibrate even if you have
set

Ringing options

(see page 59)

to

Silent

.

Note: The vibrating alert does not work when your phone is
connected to any charger or car kit.

Voice mailbox number

This number dials your voice mailbox.

See “Voice messages” in next section.

Voice messages

Voice mail is a network service that may require a
subscription from your service provider.

Your phone will notify you when you receive a voice
message.

New voice message

will appear on the display
along with the icon, and you’ll hear a short beep.
Your phone will display the number of voice messages
if you’ve received more than one.

Storing your voice mailbox number

Before you can retrieve any voice messages, you need
to store your voice mailbox number. Your service
provider usually gives this number to you.

72

When you’re ready to store your voice mailbox number,
press

Menu

1 2 2 (

Messages - Voice messages - Voice

mailbox number

). Then enter your voice mailbox phone
number and press OK. This number can be up to 32
digits long and is used until it’s changed. So if your
phone number changes, you may need to change your
voice mailbox number along with it.

Greetings, passwords, and prompts

These may vary in different wireless systems. So if you
need information about how to record your greeting or
how to store your password, contact your service
provider. You’ll also need to contact them on how to
listen to voice messages once you’re connected to your
voice mailbox.

Listening to your voice messages

If

New voice message

is displayed, just press

Listen

and
follow the prompts. If you’d rather listen to your
messages later, press

Exit

.

You can listen to messages anytime if you press and
hold the 1 key;

Calling voice mailbox

will appear on the
display. Or if you prefer, you can access your voice
mailbox by pressing

Menu

1 2 1 (

Messages - Voice

messages - Listen to voice messages

).

Voice privacy

Note: This feature may not be available in all areas. Please see
your service provider for details and availability.

Used only in digital networks, voice privacy encrypts the
voice channel so that people can not eavesdrop on your
conversation.

Voice privacy will become active only during a call and
will notify you with a beep.

Voice privacy

active will also

appear on the display.
If you turn this feature on and voice privacy becomes

inactive for any reason, your phone displays

Voice

privacy not active

and beeps.

You may set this to On or

Off

by pressing

Menu

4 4 1

(

Settings

-

Network services

-

Voice privacy

).

73

Volume

You can adjust the ringing volume and earpiece volume
of your phone.

See “Earpiece volume” on page 34 and “Ringing volume” on
page 60.

Warning and game tones

This is one of the settings in your phone’s Profiles
(

see page 53

). Warning tones include tones your phone
makes for conditions such as errors, confirmations,
power on, battery low, recharge battery and games.
You can set warning and game tones on or off.

Turning warning and game tones on and off

1.

Press

Menu

3 (

Profiles

)

2.

Your phone lists each Profile. Use

W

to highlight the
one you want to set the warning and game tones
for and press

Options

.

3.

Highlight

Customize

and press OK. Press

W

to

Warning and game tones

, then press

Select

.

4.

Scroll to

On

or

Off

and press OK

Welcome note

You can program a welcome note into your phone to
display a message when you first turn it on (i.e. hello,
your name, a reminder, etc.). The maximum length is 36
characters.

1.

Press

Menu

1 3 (

Messages

-

Welcome note

)

2.

Enter new message or edit an existing one, then
press

Options

3.

Press

W

to

Save

or

Erase

and press

OK

The welcome note displays each time your phone is
switched on. Characters you enter are added to the left of
the cursor. Press

Clear

to delete characters to the left of

the cursor. Press

W

or

V

to move the cursor right or left.

See “Entering letters and numbers” on page 35 for details.

74

Write new

This feature allows you to write text messages with your
phone.

See “Text messages and pages” on page 65 for more details.

75

6. Accessories

If you want to enhance your phone’s functionality, an
extensive range of accessories is available for you.
You can select any of these items to help accommodate
your specific communication needs. For availability of
these and other accessories, contact your service
provider.

A few practical rules for accessory operation:

Keep all accessories out of reach of small children.

When you disconnect the power cord of any
accessory, grasp and pull the plug, not the cord.

Check regularly that any vehicle-installed accessories
are mounted and are operating properly.

Installation of any complex car accessories must
be made by qualified personnel only.

Use only batteries, chargers and accessories approved by the
phone manufacturer for use with this particular phone model.
The use of any other types may invalidate any approval or
warranty applying to the phone, and may be dangerous.

See page 6 for important battery usage information.

Batteries

The following table shows battery options that are
available for your phone, charging times with the Rapid
Travel Charger (ACP-9U) and the Standard Travel
Charger (ACP-7U), talk times, and standby times.
Consult your service provider for more information.

76

Charging Times

Note: The times displayed above are approximate and will allow
your battery to obtain approximately 80% of its capacity. At this
time, the battery scroll bars on your phone’s display will stop
scrolling. If you wish to obtain 100% battery capacity, please
allow another two hours to “trickle” or “maintenance” charge.

Standby and Talk Times

Note: The times shown are approximate. Battery operation
times vary according to signal conditions, network parameters
set by the service provider, and how you use your phone.

Battery Option

ACP-7U

Charger

ACP-9U

Charger

BPS-1 Ultra Slim Li-Polymer Battery 600 mAh 2 hrs 30 min 1 hr 20 min

BLS-2N Extended Li-Ion Battery 900 mAh 4 hrs 2 hrs

BMS-2/BMS-2S Extended NiMH Battery 900 mAh 4 hrs 1 hr 30 min

BMS-2V Vibrating NiMH Battery 900 mAh 4 hrs 1 hr 30 min

BLS-4 Extended Li-Ion Battery 1500 mAh 5-6 hrs 3 hrs 30 min

Battery Option

Digital

Tal k Tim e

Analog

Tal k Tim e

Standby

Tim e

BPS-1 Ultra Slim

Li-Polymer Battery

600 mAh

1 hr 20 min to

2 hrs 10 min

40 min to

1 hr 15 min

66 to 133 hrs (dig)

20 to 33 hrs (ana)

BLS-2N Extended Li-Ion

Battery 900 mAh

2 hrs to

3 hrs15 min

1 hr to

1 hr 50 min

100 to 200 hrs (dig)

30 to 50 hrs (ana)

BMS-2/BMS-2S

Extended NiMH

Battery 900 mAh

2 hrs to

3 hrs 15 min

1 hr to

1 hr 50 min

100 to 200 hrs (dig)

30 to 50 hrs (ana)

BMS-2V Vibrating NiMH

Battery 900 mAh

2 hrs to

3 hrs 15 min

1 hr to

1 hr 50 min

100 to 200 hrs (dig)

30 to 50 hrs (ana)

BLS-4 Extended Li-Ion

Battery 1500 mAh

3 hrs 10 min to

5 hrs 10 min

1 hr 35 min to

2 hrs 50 min

170 to 335 hrs (dig)

50 to 83 hrs (ana)

77

Chargers & Other Accessories

The following chargers and other accessories are
available for your phone; please see your dealer for
details. Also, refer to the accessories brochure that was
included in your sales package for the entire line of
Nokia Original Accessories.

Note: When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger
for longer than a week, since overcharging may shorten its life.
If left unused, a fully charged battery will discharge itself over
time.

Standard Travel Charger
(ACP-7U)

This lightweight (187g) and
durable AC charger can be
used with all battery options.

To use the Standard Travel
Charger, plug it into a wall
outlet and connect the lead
from the charger to the base of
your phone. The charger can also be used together with
the Compact Desktop Charging Stand (DCH-9).

Rapid Travel Charger (ACP-9U)

This lightweight (100g) AC charger
can be used with all battery options.
Calls can be made during charging,
even with a fully discharged battery.

To use the Rapid Travel Charger
(ACP-9U), plug it into a standard
120V AC wall outlet, and connect the
lead from the charger to the base of
your phone.

The charger can also be used together with the optional
Compact Desktop Charging Stand (DCH-9).
Approximate charging times for discharged batteries
are shown at the beginning of this section.

78

Rapid Mobile Charger (LCH-8)

You can charge your
phone’s battery from your
vehicle battery by using
the Rapid Mobile Charger
(LCH-8). You can also
use this lightweight
charger with the
Compact Desktop Charging Stand (DCH-9).

Calls are possible during charging. A green light
indicates the charger is ready for charging (when not
charging) or finished charging (if it has been charging).
The battery charging times are the same as those for
the Rapid Travel Charger (ACP-9U)

The input voltage range is from 11 to 32V DC, negative
grounding. Avoid prolonged charging with the Rapid
Mobile Charger (LCH-8) when the car engine is not
running; this may cause the battery of your car to drain.
Note also that in some cars the cigarette lighter plug is
not provided with electricity if the ignition is not switched
on.

Compact Desktop Charging Stand (DCH-9)

Used together with the
Standard Travel Charger
(ACP-7U) or the Rapid Travel
Charger (ACP-9U), the
Compact Desktop Charging
Stand (DCH-9) is an
economical choice when you
need your phone close at hand, always ready for calls.

This charging stand allows you to charge your phone’s
battery in the front charging slot, plus a spare battery in
the rear charging slot.

When charging both batteries simultaneously, charging
will begin in the front charging slot and then move to the
rear slot once the front battery is 100% charged.

79

Please refer to the chart below for charging times in the
rear charging slot.

Note: Please note that if you are charging a battery in the rear
charging slot while another battery occupies the front slot,
please allow an additional two hours for a “maintenance”
charge for the battery in the front slot. Please see page 76 for
charging times for the front charging slot.

If you’re charging a battery in the front charging slot,
charging is indicated by the scrolling battery bars on the
right side of your phone’s display. When the scrolling
stops, the battery is approximately 80% charged.
A battery will be fully charged a couple of hours after the
scrolling stops.

Also, you may notice a light indicator on the stand,
which is used for charging a spare battery. A green light
indicates a battery is at least 80% full; the red light
indicates a battery is charging.

DCH-9 Rear Slot Charging Times

Battery Option

Using ACP-7U Using ACP-9U

When front
slot empty

When front

occupied

When front

slot empty

When front

occupied

BPS-1 Ultra Slim
Li-Polymer Battery
600 mAh

4 hrs

30 min

6 hrs

30 min

3 hrs

4 hrs

30 min

BLS-2N Extended
Li-Ion 900 mAh

6 hrs

30 min

8 hrs

30 min

4 hrs

10 min

5 hrs

25 min

BMS-2/BMS-2S
Extended
NiMH 900 mAh

BMS-2V Vibrating
NiMH 900 mAh

BLS-4 Ultra
Extended
Li-Ion 1500 mAh

12 hrs

15 hrs

40 min

8 hrs

10 hrs

30 min

80

7. Troubleshooting

What if charging fails?

If

Not charging

is displayed, charging is suspended.
Make sure the battery is connected to an approved
charging device and that the battery is at room
temperature. Extreme temperatures, hot or cold, can
affect your battery’s performance and prevent charging.

If charging still fails, disconnect the charger from your
phone. Then reconnect the charger to

your

phone and
retry. If you still experience charging problems, contact
your dealer and, if necessary, bring your phone in to
have it serviced. Also remember to bring in your battery
and charger.

No service

If you’re outside the wireless service area,

No service

will
display on your phone. No calls can be made or received,
however, emergency 911 calls may still be possible.

What if the call doesn’t go through?

Your phone can make and receive calls only when it’s
switched on and in the wireless network’s service area.

No service

means that you’re probably outside the

wireless service area. No calls can be made or received.

See “Get a good signal” on page 7.

Check call restrictions

means calls to the phone number

you tried to call are restricted (

see “Restrict calls” on

page 56

), or your phone is locked (

see “Phone lock” on

page 52

).

Note: Check with your service provider for information about
when you need to dial a ‘1’ and/or an area code in addition to
the number.

If you make a mistake dialing

Press

Clear

to delete the last character entered, or press

and hold

Clear

to delete all characters entered.

81

8. Reference Information

Important Safety Information

Traffic Safety

Do not use a hand-held telephone while driving a vehicle.
If using a hand-held phone park the vehicle before conversing.

Always secure the phone in its holder; do not place the phone
on the passenger seat or where it can break loose in a collision
or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn
on public roads is not permitted.

Remember, road safety always comes first!

Operating Environment

Remember to follow any special regulations in force in any area
and always switch off your phone whenever it is forbidden to
use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety instructions.
Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the equipment
should only be used in the normal operating position (held to
your ear with the antenna pointing over your shoulder).

Electronic Devices

Most modern electronic equipment is shielded from radio frequency
(RF) signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation
of 6 inches (20 cm.) be maintained between a handheld wireless
phone and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless
Technology Research. Persons with pacemakers:

• Should always keep the phone more than 6 inches (20 cm)
from their pacemaker when the phone is switched on;

• Should not carry the phone in a breast pocket;

• Should use the ear opposite the pacemaker to minimize
the potential for interference.

• If you have any reason to suspect that interference is
taking place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing

82

aids. In the event of such interference, you may want to consult
your service provider.

Other Medical Devices

Operation of any radio transmitting equipment, including cellular
phones, may interfere with the functionality of inadequately
protected medical devices. Consult a physician or the manufac­turer of the medical device to determine if they are adequately
shielded from external RF energy or if you have any questions.
Switch off your phone in health care facilities when any regula­tions posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be
sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles (e.g. electronic
fuel injection systems, electronic anti-skid (anti-lock) braking
systems, electronic speed control systems, air bag systems).
Check with the manufacturer or its representative regarding
your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices so
require.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.

Users are advised to switch off the phone while at a refueling
point (service station). Users are reminded of the need to
observe restrictions on the use of radio equipment in fuel
depots (fuel storage and distribution areas), chemical plants
or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats;
chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust or metal
powders; and any other area where you would normally be
advised to turn off your vehicle engine.

Vehicles

Only qualified personnel should service the phone, or install the
phone in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.

83

Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.

For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment, in the area over the air
bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.

Switch off your phone before boarding an aircraft. The use of
wireless telephones in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network
and may be illegal.

Failure to observe these instructions may lead to the suspension
or denial of telephone services to the offender, or legal action, or
both.

Emergency Calls

IMPORTANT!

This phone, like any wireless phone, operates using radio signals,
wireless and landline networks as well as user-programmed
functions which can not guarantee connection in all conditions.
Therefore, you should never rely solely upon any wireless phone
for essential communications (e.g. medical emergencies).

Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.

Making an Emergency Call

1. If the phone is not on, switch it on

2. Press the

ô

key to ready the phone for calls. (Press

it twice if there are still digits on the display.)

3. Key in the emergency number for your present
location (e.g. 911 or other official emergency number).
Emergency numbers vary by location.

4. Press

ó.

If certain features are in use (Keyguard, restrict calls, etc.), you
may first need to turn those features off before you can make an
emergency call. Consult this document and your local cellular
service provider.

When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember
that your wireless phone may be the only means of
communication at the scene of an accident - do not cut off the
call until given permission to do so.

84

Radio Frequency (RF) Signals

THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed
by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR
are conducted using standard operating positions accepted by
the FCC with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is deter­mined at the highest certified power level, the actual SAR level of
the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple
power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station
antenna, the lower the power output.

Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations
(e.g., at the ear) as required by the FCC for each model. The
highest SAR value for this model phone when tested for use at
the ear is 1.49 W/kg. While there may be differences between
the SAR levels of various phones and at various positions, they
all meet the government requirement.

The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID LJONSW-3AF.
_____________________________________________________

*In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to
account for any variations in measurements.

85

Care and Maintenance

Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you to fulfill any warranty obligations and allow you to enjoy
this product for many years. When using your phone, battery,
charger, OR any accessory:

• Keep it and all its parts and accessories out of small
children’s reach.

• Keep it dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.

• Do not use or store it in dusty, dirty areas as its moving
parts can be damaged.

• Do not store it in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp
or melt certain plastics.

• Do not store it in cold areas. When the phone warms up
(to its normal operating temperature), moisture can form
inside the phone, which may damage the phone's
electronic circuit boards.

• Do not attempt to open it. Non-expert handling of the
device may damage it.

• Do not drop, knock or shake it. Rough handling can break
internal circuit boards.

• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean it. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.

• Do not paint it. Paint can clog the device’s moving parts
and prevent proper operation.

• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications or
attachments could damage the phone and may violate
regulations governing radio devices.

• If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified service
facility. The personnel there will assist you, and if
necessary, arrange for service.

86

9. Technical Data

Wireless System Dual-Band TDMA and AMPS
Weight 165g (5.8 oz) with BMS-2/

BMS-2S 900 mAh NiMH Battery
Size 140 cc
Frequency Range

Lowband 824.04 - 848.97 MHz (TX)

869.04 - 893.97 MHz (RX)

Highband 1850.04 - 1909.92 MHz (TX)

1930.08 - 1989.96 MHz (RX)

Transmitter Output Power

Up to 600mW nominal
Battery Voltage 3.6 V nominal
Charging current 850 mAh max.
Operating Temperature -20°C to + 40°C

(-4°F to + 104°F)
Number of Channels 832 lowband

1997 highband
Number of NAMs 3
Memory Locations 199
Memory Capacity Alpha: 16 digits per location

Numeric: 32 digits per location

Nokia, Connecting People and the Original Accessories logos
are trademarks of Nokia Corporation and/or its affiliates.

The information contained in this phone was written for dual­mode TDMA and AMPS phones.

The right to make changes and improvements to any of the
products described in this guide without prior notice is reserved.

© 2001 Nokia Inc. All rights reserved.

These commodities are authorized by the U.S. Government for
export only to Canada, Mexico, or the United States. They may
not be resold, diverted, transferred, or otherwise disposed of in
any other country, either in their original form or after being
incorporated through an intermediate process into other end­items, without the written approval of the U.S. Department of
State.

Part No. 9352388 Issue No. 4 Phase 3 Printed in Canada 01/01

87

10. NOKIA One-Year Limited
Warranty

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”)
is free from defects in material and workmanship that result in
Product failure during normal usage, according to the following
terms and conditions:

1. The limited warranty for the Product extends for ONE (1) year
beginning on the date of the purchase of the Product.

2. The limited warranty extends to the original purchaser of the
Product (“Consumer”) and is not assignable or transferable to
any subsequent purchaser/end-user.

3. The limited warranty extends only to Consumers who
purchase the Product in the United States.

4. During the limited warranty period, Nokia will repair, or replace,
at Nokia's option, any defective parts, or any parts that will not
properly operate for their intended use with new or factory rebuilt
replacement items if such repair or replacement is needed
because of product malfunction or failure during normal usage.
No charge will be made to the Consumer for any such parts.
Nokia will also pay for the labor charges incurred by Nokia in
repairing or replacing the defective parts. The limited warranty
does not cover defects in appearance, cosmetic, decorative or
structural items, including framing, and any non-operative parts.
Nokia's limit of liability under the limited warranty shall be the
actual cash value of the Product at the time the Consumer
returns the Product for repair, determined by the price paid by
the Consumer for the Product less a reasonable amount for
usage. Nokia shall not be liable for any other losses or damages.
These remedies are the Consumer’s exclusive remedies for
breach of warranty.

5. Upon request from Nokia, the Consumer must prove the date
of the original purchase of the Product by a dated bill of sale or
dated itemized receipt.

6. The Consumer shall bear the cost of shipping the Product to
Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping
the Product back to the Consumer after the completion of
service under this limited warranty.

7. The Consumer shall have no coverage or benefits under this
limited warranty if any of the following conditions are applicable:

a) The Product has been subject to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections, un­authorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of
Nokia, including damage caused by shipping.

88

b) The Product has been damaged from external causes such
as collision with an object, or from fire, flooding, sand, dirt,
windstorm, lightning, earthquake or damage from exposure to
weather conditions, an Act of God, or battery leakage, theft,
blown fuse, or improper use of any electrical source, or damage
caused by the connection to other products not recommended
for interconnection by Nokia.

c) Nokia was not advised by the Consumer in writing of the
alleged defect or malfunction of the Product within fourteen (14)
days after the expiration of the applicable limited warranty
period.

d) The Product serial number plate or the accessory data code
has been removed, defaced or altered.

e) The defect or damage was caused by the defective function
of the cellular system or by inadequate signal reception by the
external antenna.

8. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of
purchase for repair or replacement processing.

b) If “a” is not convenient because of distance (more than 50
miles) or for other good cause, the Consumer shall ship the
Product prepaid and insured to:

Nokia Inc.
Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL. 32901

c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the
problem, proof of purchase and service agreement (if
applicable). Expenses related to removing the Product from an
installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be
responsible for any expenses related to reinstallation of the
Product.

e) Nokia will repair or authorize the repair of the Product under
the limited warranty within 30 days after receipt of the Product
by Nokia or an Nokia authorized service center. If Nokia cannot
perform repair covered under this limited warranty within 30
days, or after a reasonable number of attempts to repair the
same defect, Nokia at its option, will provide a replacement
Product or refund the purchase price of the Product less a
reasonable amount for usage.

89

f) If the Product is returned to Nokia during the limited warranty
period, but the problem with the Product is not covered under
the terms and conditions of this limited warranty, the Consumer
will be notified and given an estimate of the charges the
Consumer must pay to have the Product repaired, with all
shipping charges billed to the Consumer. If the estimate is
refused, the Product will be returned freight collect. If the
Product is returned to Nokia after the expiration of the limited
warranty period, Nokia's normal service policies shall apply and
the Consumer will be responsible for all shipping charges.

9. The Product consists of newly assembled equipment that
may contain used components that have been reprocessed
to allow machine compliance with Product performance and
reliability specifications.

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR
FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL
BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED
WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED
WARRANTY IS THE CONSUMER'S SOLE AND EXCLUSIVE
REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO, LOSS OF ANTICIPATED
BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE,
PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR
ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST
OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWN­TIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING
CUSTOMERS, AND INJURY TO PROPERTY, RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM BREACH OF THE WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER
LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF
THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT
BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE
LIMITED WARRANTY, OR LOSS OF USE DURING THE
PERIOD THAT THE PRODUCT IS BEING REPAIRED.

11. Some states do not allow limitation of how long an implied
warranty lasts, so the above one-year warranty limitation may
not apply to you (the Consumer). Some states do not allow the
exclusion or limitation of incidental and consequential damages,
so certain of the above limitations or exclusions may not apply
to you (the Consumer). This limited warranty gives the Consumer
specific legal rights and the Consumer may also have other
rights which vary from state to state.

90

12. Nokia neither assumes nor authorizes any authorized
service center or any other person or entity to assume for it any
other obligation or liability beyond that which is expressly
provided for in this limited warranty including the provider or
seller of any extended warranty or service agreement.

13. This is the entire warranty between Nokia and the
Consumer, and supersedes all prior and contemporaneous
agreements or understandings, oral or written, and all
communications relating to the Product, and no representation,
promise or condition not contained herein shall modify these
terms.

14. This limited warranty allocates the risk of failure of the
Product between the Consumer and Nokia. The allocation is
recognized by the Consumer and is reflected in the purchase
price of the Product.

15. Any action or lawsuit for breach of warranty must be
commenced within eighteen (18) months following delivery of
the Product.

16. Questions concerning this limited warranty may be directed
to:

Nokia Customer Care Center
Nokia Inc.
7725 Woodland Center Boulevard, Suite #150
Tampa, FL 33614
Telephone: 1-888-NOKIA2U (1-888-665-4228)
Facsimile: [phone]
TTY Users: 1-800-24NOKIA (1-800-246-6542)

17. The limited warranty period for Nokia supplied attachments
and accessories is specifically defined within their own warranty
cards and packaging.

©Nokia is a registered trademark of Nokia Corporation.

91

11. Index

A

ABC mode

16,

35

access codes

16

accessories

batteries

75

chargers

77

alarm clock

16

answering a call

9

antenna

7

automatic answer

17

automatic redial

18

B

batteries

attaching

3

charging

4

charging times

76

discharging

5

removing

3

standby times

76

talk times

76

C

calculator

18

currency converter

19

calendar

19

call forwarding

21

call log

22

clearing call lists

29

dialed calls list

32

missed calls list

45

options in call lists

23

received calls list

56

call restrictions

see

restrict

calls

call timers

17,

24

clearing

30

current call timer

32

life timer

42

call waiting

24

caller groups

25

graphics

26

renaming

26

ringing tones

26

caller ID

27

send own number

63

calling cards

making calls with

29

storing in phone

27

calls

answering

9

answering automatically

17

answering with call

waiting

24

conference calls

31

ending

9

forwarding

21

making

8

muting

44

silencing incoming

9

swapping

25

unmuting

44

care and maintenance

85

chargers

77

charging times

76

clock

displaying/hiding

31

setting

30

time format

31

conference calls

31

currency converter

19

customer care

32

92

D

dialed calls list

32

Dice game

39

digital/analog selection

33

E

earpiece volume

34

emergency calls

34,

83

emergency key 9 feature

35

ending a call

9

entering letters and

numbers

35

F

factory settings, restoring

56

forwarding calls

see

call

forwarding

G

game tones

73

games

38

H

help

13

I

inbox

39,

65

in-call menu

40

K

Keyguard

10

keypad cover setting

40

keypad tones

40

keys

locking

10

power key

7

scroll key

11

softkeys

11

L

language

41

last number redial

41

letters, entering

35

life timer

42

lights

and Keyguard

10

in Car profile

42

lock code

42

locking the keypad

see

Keyguard

locking your phone

52

Logic game

38

M

making a call

8

Memory game

38

memory status

43

menu

help

13

shortcuts, summary

14

shortcuts, using

13

message alert tone

44

microphone, muting/

unmuting

44

missed calls list

45

muting calls

44

N

NAM selection

45

names, storing

see

phone

book

network feature setting

46

network services

47

numbers, entering

35

numbers, storing

see

phone book

93

O

on/off

7

one-touch dialing

48

outbox

49

P

paging

see

text messages

phone book

49

available memory

43

editing entries

51

erasing entries

51

finding entries

51

one-touch dialing
scrolling view

61

storing entries

50

phone lock

52

unlocked phone

number

70

power key

7

private systems

see

system selection

profiles

53

pubic system selection

55

public systems

see

system

selection

R

received calls list

56

redial

41

automatic

18

residential systems

see

system selection

restore factory settings

56

restrict calls

56

ringing options

59

vibrating alert

71

ringing tones

59

ringing volume

60

roaming

60

S

safety information

81

Saved

65

scroll bar

11

scroll key

11

scrolling

12

scrolling view

61

security code

62

send own number

63

signal strength

7

Snake game

38

softkeys

11

special characters in

names

37

special characters in

numbers

37

speed dialing

see

one-

touch dialing

standby times

76

start screen

12

system selection

64

T

talk times

76

technical information

86

text messages

65

forwarding

68

inbox

39,

65

message setting

66

reading

67

receiving

67

replying to

68

sending

66

storage

68

writing

66