Nokia 6160I User Manual

Download

OWNER’S MANUAL

Keys

Power key

Press and hold to turn your phone on or off.

Scroll keys

Scroll through menus, submenus, and the phone book. Press and hold for continuous scrolling.

Menu Names

MenuMenu

Dials the number on the display.

Names

NamesNames

Fixed antenna

Do not attempt to extend or remove!

Soft keys

Their current function is displayed above the key (for example, here their functions are “Menu” and “Names”).

Push this key to end a

phone call.

Indicators and Icons

You have an active call.

The phone is waiting for you to enter a response.

All tones for the current profile have been set to

Keyguard has been activated to help prevent any accidental keypresses.

You have one or more voice messages waiting.

You have one or more unread text messages waiting.

Digital service is available.

Any characters you enter will be upper-case letters or numbers. Press the # key to switch letter case.

Any characters you enter will be lower-case letters or numbers. Press the # key to switch letter case.

This appears when you press and hold the # key when storing names. Letters can not be entered when this appears, allowing quicker access to numbers.

You are in “special character” mode; select a special character and press can switch to this mode by pressing the ∗ key.)

The alarm clock is set.

You have a reminder in your calendar to do something (appears only on Calendar display).

You have a reminder in your calendar that it’s someone’s birthday (appears only on Calendar display).

You have a reminder in your calendar to call someone (appears only on Calendar display).

You have a reminder in your calendar of a meeting (appears only on Calendar display).

. (When entering letters, you

Insert

Silent

1. Safety At A Glance . . . . . . . . . . . . . . . 1

2. Getting Connected. . . . . . . . . . . . . . . 3

Attaching your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Charging your new battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

When is a good time to charge? . . . . . . . . . . . . . . . . . . . . . .4

Important Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . .6

3. The Basics . . . . . . . . . . . . . . . . . . . . . 7

Switching the phone on and off . . . . . . . . . . . . . . . . . . . . . . . . .7

Get a good signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Want to stop your phone from ringing

without answering the call?. . . . . . . . . . . . . . . . . . . . . . . . . .9

Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

4. Using Your Phone. . . . . . . . . . . . . . . .11

The display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

What is the ‘start screen’? . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Scrolling through the main menu . . . . . . . . . . . . . . . . . . . . . .12

Help text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Summary of menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

5. Features A to Z . . . . . . . . . . . . . . . . 16

Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

All calls timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Automatic answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Automatic redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Storing exchange rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Converting currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Caller groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Caller ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Making calling card calls . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Selecting time format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Displaying or hiding the clock . . . . . . . . . . . . . . . . . . . . . . 32

Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Current call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Customer care contact number . . . . . . . . . . . . . . . . . . . . . . . 33

Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Entering letters and numbers . . . . . . . . . . . . . . . . . . . . . . . . 35

ABC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Changing letter case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

123 mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Last call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Life timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Listen to voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Changing your lock code . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Manual touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Memory status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Message alert tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Missed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Network feature setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Storing codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

One-touch dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Paging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Storing a name and number . . . . . . . . . . . . . . . . . . . . . . . .50

Recalling names & numbers . . . . . . . . . . . . . . . . . . . . . . . . 50

Erasing stored names and numbers. . . . . . . . . . . . . . . . . . . 51

Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Customizing Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Ringing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Ringing tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Ringing volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Security code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Changing your security code . . . . . . . . . . . . . . . . . . . . . . . .61

Send own number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Storing a name & number. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Quick save. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Text messages and pages. . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Writing text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Sending text messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Receiving text messages. . . . . . . . . . . . . . . . . . . . . . . . . . .65

Reading text messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Reading options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Forwarding a message . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

iii

Replying to a message . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Receiving a page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Touch tone length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Unlocked phone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Vibrating alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Setting up your voice mailbox number . . . . . . . . . . . . . . . . 70

Greetings, passwords, and prompts . . . . . . . . . . . . . . . . . . 71

Listening to your voice messages . . . . . . . . . . . . . . . . . . . 71

Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Warning and game tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Write new . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

6. Accessories. . . . . . . . . . . . . . . . . . . 73

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Chargers & other accessories . . . . . . . . . . . . . . . . . . . . . . . . 75

7. Troubleshooting. . . . . . . . . . . . . . . . 78

8. Reference Information . . . . . . . . . . 79

9. Technical Data . . . . . . . . . . . . . . . . . 85

10. NOKIA One-Year Limited Warranty . . 86

11. Index . . . . . . . . . . . . . . . . . . . . . . . . 90

1. Safety At A Glance

Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal.

For more detailed safety information, see “Important Safety Information” on page 79.

Road Safety Comes First

Don’t use a hand-held phone while driving; park the vehicle first.

Switch Off In Hospitals

Switch off your phone when near medical equipment. Follow any regulations or rules in force.

Switch Off On Aircraft

Mobile phones can cause interference. Using them on aircraft is illegal.

Switch Off When Refueling

Do not use the phone at a refueling point. Do not use near fuels or chemicals.

Switch Off Near Blasting

Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules in force.

Interference

All mobile phones may get interference which could affect performance.

Use Sensibly

Use only in the normal position (to ear). Avoid unnecessary contact with the antenna when phone is on.

Qualified Service

Only qualified service personnel may install or repair cellular phone equipment.

Accessories and Batteries

Use only approved accessories and batteries. Do not connect incompatible products.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (e.g. when using a telephone in close proximity to receiving equipment). The FCC/Industry Canada can require you to stop using your telephone if such interference can not be eliminated. If you require assistance, contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Using this Guide

The wireless phone described in this guide is approved for use in TDMA/AMPS networks.

A number of features included in this guide are called Network Services. They are special services provided by wireless service providers. Before you can take advantage of any of these Network Services, you must subscribe to the service(s) from your home service provider and obtain instructions for their use.

Updates

The latest version of this Owner’s Manual may be found on Nokia’s World Wide Web site at www.NokiaUSA.com.

Interactive manual

Now, Nokia has a great new way for you to learn how to use all of your phone features. Go to www.NokiaHowTo.com to access the Nokia Interactive Owner’s Manual. It provides an interactive way to get step-by-step instructions for any of your phone’s features.

Disclaimer

It’s possible that you may not be able to activate your phone on all wireless systems. Please see your service provider for details.

2. Getting Connected

You’re battery should be charged before you activate your new phone. This section will help familiarize you on how, and when, to charge your battery.

Attaching your battery

Simply place the battery in the grooves on the back of your phone. Then slide the battery upward until it clicks.

Note: Use only those batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer.

See “Important Battery Information” on page 6.

Removing the battery

Note: Switch off the phone before removing the battery!

Press and hold the

button at the top of the battery.

Slide the battery

toward the bottom of the phone.

Lift the battery off

the phone.

Charging your new battery

Your phone can be used with either a rechargeable Li-Ion or NiMH battery. Note that a new battery’s full performance is achieved only after two or three complete charge and discharge cycles.

With your phone on or off, connect the charger to a standard 120V AC outlet. Then connect the lead from the charger to the bottom of your phone or place it on a charging stand.

When the battery begins charging, your phone will beep once and the battery strength indicator on the right side of the display will scroll.

Note: If the battery is totally empty, it may take a few minutes before the charging indication appears on the display.

If your phone displays

Not charging

, charging is suspended. Check that the battery is not connected to a non-approved charging device. If the battery is very hot or cold, wait for a while; charging will automatically resume after the battery is restored to its normal operating state. If charging still fails, contact your dealer.

When is a good time to charge?

You can charge your battery anytime. If you have a NiMH battery, you should allow it to completely discharge once in a while.

When your phone beeps once and displays

Battery low

you only have a couple of minutes of talk time remaining. The repetition rate of these battery-low warnings depend on the remaining battery capacity and the battery condition. These warnings are more frequent when you’re in a call.

Note: The phone will not give you the warning tone under certain conditions. See “Warning and game tones” on page 72.

Once all the power has drained from your battery, you’ll hear three beeps with the message

Recharge battery

your display. At this point, your phone will switch itself off and you’ll need to recharge your battery.

When is charging complete?

When the charge indicators stop scrolling, your phone is considered fully charged. However, a slight increase in charge may occur if your phone is left connected to the charger for a while. This is called “trickle charge.”

Charging times depend on the type of battery and charger used.

For approximate charging and operating times, see “Standby and Talk Times” on page 74.

Can you make calls while charging?

Yes, you can. But your battery may not charge while a call is in progress. Charging should resume once you end the call.

Discharging NiMH batteries

A NiMH battery lasts longer and performs better if you fully discharge it from time to time. To discharge the battery, leave your phone switched on until the battery is drained. The phone will display several messages that the battery is low and that you need to recharge it; just ignore them. Do not attempt to discharge the battery by any other means.

Important Battery Information

• The battery can be charged and discharged hundreds of

times but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.

• Use only batteries approved by the phone manufacturer

and recharge your battery only with the chargers approved by the manufacturer. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused a fully charged battery will discharge itself over time.

• (NiMH batteries only) For good operation times, discharge

the battery from time to time by leaving your phone switched on until it turns itself off (or by using the battery discharge facility of any approved accessory available for your phone). Do not attempt to discharge the battery by any other means.

• Temperature extremes will affect the ability of your battery

to charge: allow it to cool down or warm up first.

• Use the battery only for its intended purpose.

• Never use any charger or battery which is damaged or

worn out.

• Do not short circuit the battery. Accidental short circuiting

can occur when a metallic object (coin, clip, or pen) causes direct connection of the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object.

• Leaving the battery in hot or cold places, such as in a

closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59º F and 77º F (15º C and 25º C). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. NiMH batteries’ performance is particularly limited in temperatures below 14º F (-10º C). Li-Ion batteries’ performance is particularly limited in temperatures below 32º F (0º C).

• Do not dispose of batteries in a fire!

• Dispose of used batteries in accordance with any local

regulations.

3. The Basics

You have purchased a powerful phone, with lots of features. Read this section for some very basic information on how to use your phone.

A more comprehensive description of your phone is covered in “Features A to Z” starting on page 16.

Switching the phone on and off

Press and hold the key for two seconds to switch the phone on or off.

Switching off with the key

Quickly press the key (

Switch off!

highlighted) then press OK.

Note: This method is available in all profiles except

Car

NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.

TIPS ON EFFICIENT OPERATION: As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

See “Safety At A Glance” on page 1 for more information.

will appear,

Headset

and

Get a good signal

Your phone operates on radio waves, and the quality of radio reception depends entirely on the strength of the radio signal in your area.

This radio coverage is maintained by a wireless network and the quality of calls on a wireless phone depends on the strength of the wireless radio signal.

Checking signal strength

When you are at the start screen or in a call, the signal strength is indicated by the indicators on the left side of your phone’s display. These indicators scroll as the strength of the signal increases and decreases.

Increasing your phone’s signal may be easy. Try moving your phone slightly, or move towards a window if you’re calling from inside a building.

Making a call

Enter the area code and phone number and press

Editing a number on display

to move the cursor to the left and W to move it

Press

to the right. Press left of the cursor.

Dialing stored phone numbers

View stored names and numbers by pressing from the start screen (

See “Phone book” on page 49 for details on storing numbers.

Calling card calls

See “Calling card” on page 28.

Emergency calls

See “Emergency calls” on page 34.

to delete the character to the

Clear

see page 12)

(see page 12)

, then press

or V

Ending a call

Press

Answering a call

Press any key except

Note: If Keyguard is on (see next paragraph), only

ó answers calls.

Want to stop your phone from ringing without answering the call?

Press answering a call if it's inconvenient to talk.

You can still answer the call if person who is calling is still flashing on your display.

If you don't wish to answer the call, it will be forwarded to your voice mailbox if you have a voice mail subscription.

See “Voice messages” on page 70 for details on your voice mailbox.

Keyguard

This feature helps to prevent accidental key presses (e.g. when by locking your keypad.

If any keys are pressed while Keyguard is activated,

and then *

Activating Keyguard

There are three different ways to activate Keyguard.

Keys locked

when the phone rings. This keeps you from

or the name of the

Call

phone is in your pocket, in your purse)

your

will display.

will appear on the display when activated.

• Press and hold ô

• Press

Press Unlock

∗

9 at the start screen

Deactivating Keyguard

There are two different ways to deactivate Keyguard.

• Press

• Press and hold press

Note: When Keyguard is ON, calls to the emergency number programmed into your phone (e.g. by pressing 911 then may be possible. However, Emergency key 9 doesn’t work.

Unlock,

then ∗

ô until

Unlock keys?

appears, then

ó)

Answering a call with Keyguard active

Press

to answer the call. After you end the call,

Keyguard automatically becomes active again.

Some notes about Keyguard

• Calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number). The number is displayed only after you have keyed in its last digit.

• Pressing the key quickly turns lights on for 15 seconds.

• Keyguard is automatically turned off when the phone is connected to a car kit.

4. Using Your Phone

The first few days you have your phone, play with it to learn how the menu and submenu system works. The more you learn how to access these menus and submenus, the more fun you’ll have with your phone.

This section describes the different methods of using your phone menus and submenus.

The display

Soft keys

Your phone has two soft keys located below the display. The current function is indicated by the texts appearing directly above them. Press the corresponding key under the choice you wish to select.

This illustration shows the phone at the start screen

(see “What is the ‘start screen’?” on page 12)

screen always displays the right.

allows you to access your phone’s

menus and submenus. your phone book

(see “Phone book” on page 49)

on the left and

allows you to access

Names

Scroll key

Your phone has a scroll key located just below the display screen. The scroll key has two arrows on it that look like

and W. Press these to navigate through your

phone’s menus and submenus, as well as through your phone book.

(See “Phone book” on page 49)

. The start

Names

Scroll bar

When you access your phone’s menu and submenus, you will notice a scroll bar at the far right of the screen. This bar indicates your location in the menu structure; each “tab” on the bar represents a different menu item.

For example, press

once. The scroll bar appears

with the first (top) tab displayed. A different tab appears each time you press the

or V key to move up and

down through the menu structure. The scroll bar works the same way with submenus.

Menu & submenu numbering

When you scroll to a menu or submenu, the menu number and/or submenu number appears on the display above the scroll bar.

For example, when you scroll to menu 2 (

Call log

number 2 appears in the top right-hand corner of the display. If you scroll to menu 4 ( (

Security settings

), your phone will display

Settings

), submenu 3

4-3

right-hand corner.

See “Summary of menu items” on page 14 for a list of your phone’s features along with their menu locations.

Also, see “Using shortcuts” on page 13.

What is the ‘start screen’?

The start screen appears when you first turn your phone on, in its idle state.

When you want to get to the start screen, press any time except during a call (unless you want to hang up).

Note: If you press ô when the phone is requesting input

(i.e., a setting, phone number, name, etc.), the phone displays the start screen and the input is not saved.

) the

in the top

Scrolling through the main menu

Press

at the start screen. Then press

reach the desired menu item.

Press

Select, Options or OK

(whichever appears) to

enter submenus and to choose options.

Press

to exit the present menu or

Exit

Back

one level.

or V to

to go back

Using shortcuts

This is a quick and easy way to access a menu without having to scroll through other menus.

Press

, then menu number, then submenu

number.

Press the menu and submenu numbers within a couple of seconds of each other when using this method.

For a summary of your phone’s menu structure, see “Summary of menu items” on page 14.

Help text

If you’re not sure how a feature works, wait just a few seconds and help text will appear for most of your phone’s features. Press the text or

Back

to exit.

to see the next page of

Summary of menu items

1Messages

1 1 Text Messages

1 1 1 Inbox 1 1 2 Write new 1 1 3 Outbox 1 1 4 Saved 1 1 5 Erase all

1 2 Voice Messages

1 2 1 Listen to voice messages 1 2 2 Voice mailbox number

1 3 Welcome Note

2Call log

2 1 Missed calls

2 2 Dialed calls

2 3 Received calls

2 4 Clear call lists

2 5 Call timers

3 Profiles

3 1 Normal

3 1 1 Select 3 1 2 Customize

(following submenus appear in all profiles)

3 1 2 1 Ringing options 3 1 2 2 Ringing volume 3 1 2 3 Ringing tone 3 1 2 4 Vibrating alert (w/vibrating battery only) 3 1 2 5 Keypad tones 3 1 2 6 Warning and game tones 3 1 2 7 Message alert tone

3 2 Silent

3 3 Meeting

3 4 Outdoor

3 5 Pager

3 6 Car

(once used with car kit)

3 7 Headset (once used with headset)

4Settings

4 1 Call settings

4 1 1 Emergency key 9 4 1 2 Automatic redial 4 1 3 Calling card

4 2 Phone settings

4 2 1 Clock 4 2 2 Alarm clock 4 2 3 Touch tones 4 2 4 Restore factory settings 4 2 5 Language

4 3 Security settings

4 3 1 Restrict calls 4 3 2 Access codes

4 4 Network services

4 4 1 Voice privacy 4 4 2 Call forwarding 4 4 3 Call waiting 4 4 4 Send own number 4 4 5 Network feature setting 4 4 6 NAM selection

5System

5 1 Automatic

5 2 Manual

5 3 New search

6Games

6 1 Memory

6 2 Snake

6 3 Logic

6 4 Dice

7 Calculator

8Calendar

9 Keyguard

5. Features A to Z

ABC mode

This allows you to enter names into your phone book.

Beep once

ringing option

See “Entering letters and numbers” on page 35

Access codes

This is a security feature that allows you access to certain phone features, such as the phone lock ( and unlocked phone number (

Also, see “Lock code” on page 42 and “Security code” on page 60.

page 69

Alarm clock

The alarm clock operates off your phone’s clock. The volume for the alarm clock is determined by the current ringing volume.

Note: If you have selected the (see page 57), your alarm clock will quietly beep one time.

See “Clock” on page 31 for information on your phone’s clock.

Silent

Setting the alarm clock

Press

clock

Enter time you wish to set alarm (use two-digit

)

4 2 2 (

Settings

Phone settings

fields for hours and minutes). Existing digits will be replaced with the new alarm time.

Press

Note: Step 4 appears only if you have selected am/pm format; see “Selecting time format” on page 31 for more information.

Select either am or pm and press

page 51

Alarm

)

When the alarm goes off

Press

to shut off the alarm.

Stop

Snoozing

Press

Snooze

The alarm will go off again in 10 minutes. If you let the phone alarm for 1 minute without pressing a key, it stops alarming for 10 minutes then starts again.

Turning the alarm clock off

Press

clock

Note: If you have selected the alarm will only beep once. The best profile to use while using the alarm clock is modified from their original settings.

For more information on Profiles, see page 53.

4 2 2 (

), then scroll to

Normal

Settings

and press OK.

Off

Outdoor

Phone settings

Silent

, unless these have been

Meeting

profile, your

All calls timer

This feature keeps track of how much time you have spent on all calls with your phone.

See “Call timers” on page 24

Automatic answer

This is one of the settings in your phone’s Profiles

see page 53

(

). With this on, your phone answers

incoming voice calls after one ring.

Note: This can only be used when your phone is connected to a headset or to an ap proved handsfree car kit equipped with the ignition sense option, with the ignition on.

Alarm

Activating automatic answer

Press

Your phone lists each profile. Use

either the

Note:

Car

already been connected to a car kit or headset at least one time.

Highlight

Automatic answer

Press

3 (

and

Profiles

Car

Headset

will not appear unless your phone has

Headset

Customize

and press OK. Press

, then press

to On and press OK.

)

profile and press

Select

to highlight

Options

again.

Automatic redial

Your phone will redial the number you’re trying to call up to 3 times after you hear a quick, busy signal. Press

to stop the call attempts.

This feature attempts to redial numbers that are busy due to the wireless network. It will not redial numbers to a busy party.

Activating automatic redial

Press

redial

4 1 2 (

), then press

Settings

Call settings

or V to On and press OK.

Automatic

Calculator

Your phone’s calculator adds, subtracts, multiplies, divides, and converts currency.

Remember! Your phone must be switched on to use this feature. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Using the calculator

Press

Enter the first number in the calculation (press # for

7 (

Calculator

)

decimals)

To add, press ∗ (+ appears)

To subtract, press ∗∗ twice (- appears) To multiply, press To divide, press

(* appears)

∗∗∗

( / appears)

∗∗∗∗

To add a decimal, press the # key

Enter the second number

Repeat these steps as many times as needed. Press

to erase any mistakes.

Clear

Press

Note: You can also choose

from the list of options.

Divide

Options

. With

highlighted, press

Equals

Add, Subtract, Multiply

, and

Storing exchange rate

Press

Scroll to

Press

visited unit unit

7, then press

Exchange rate

or V at either

How many visited units to a home

Options

and press

How many home units to a

, depending on how you wish to convert the

currency. Press OK once you decide.

Enter the appropriate exchange rate and press OK

(use the # key for decimals)

Phone will display

Rate saved

Converting currency

Press

Enter number of units, then press

Press

press

Converted currency will display

or V to either

To home

Options

To visited

Calendar

The calendar keeps track of birthdays, meetings, simple reminders, and calls you need to make. It can even sound an alarm when it’s time for you to make a call or go to a meeting.

Remember! Your phone must be switched on to use this feature. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Note: Your phone must remain on to use the calendar’s alarm feature. If your phone is off, the alarm will not sound at its scheduled time.

, and

Using the calendar

Press

If you haven’t set the time and date, your phone

8 (

Calendar

)

prompts you to set your phone’s clock

When your phone prompts you for the time with

, enter the time in hours and minutes

hh:mm

(using two-digit fields), then press

Time format (24-hour or am/pm) is set using the Clock. See “Selecting time format” on page 31.

When your phone prompts you for the date with

mm/dd/yyyy

, enter the month and day (using twodigit fields) and year (using a four-digit field), then press OK.

Use W to move the cursor right and V to move it

Tip:

left. When you enter a digit, it writes over the number to the right of the cursor.

Your phone displays the current day. You can also

scroll to different days by pressing

Once you’re at the date you want, press

Then use press

to highlight the option you want, and

Wý

The options are:

Select.

or V.

Options

Option 1: View day

With this option, you can view the notes of the day currently on display.

to scroll through the notes. Each note allows you

Use

to choose the following

clears the note from your calendar.

Erase

gives you the same prompts you got when you

Edit

Options

made the note.

gives you the date prompt so you can move the

Move

note to another date.

Option 2: Make note

With this option, you’ll need to choose

Meeting

, or

. Your phone will prompt you for

Birthday

Reminder, Call

more information depending on which one you choose. You can also set an alarm for any calendar note.

See “Entering letters and numbers” on page 35 for help with entering information at the

Note: When the alarm goes off, you can press Press

to shut off the alarm.

Subject:

prompt.

Postpone

or OK.

Option 3: Erase notes

With this option, you’ll need to choose which notes to erase. If you choose all the notes for the day currently on display (

Of Chosen Day

), or

One By One

(for all notes in the calendar), your phone presents each note to you with the option

If you choose

Erase

All at Once

Back

, your phone will delete all calendar notes. When prompted to confirm the erase, press

Yes

or No.

Option 4: View all

This allows you to view the notes of the entire calendar.

or V to scroll through the notes.

Use

will appear if there are no notes in the calendar.

empty

Calendar memory

Option 5: Go to date

Enter the date you wish to go to.

Option 6: Set the date

Enter the day and month (using two-digit fields) and year (using a four-digit field), then press OK.

Call forwarding

This network service is used to forward incoming calls to another number so you won’t miss an important call. Check with your service provider for details.

Note: Before you can activate this feature, you should first store the feature code given to you by your service provider. Otherwise, this feature may not appear in the menu.

However, you can use the feature code manually, if you choose, by including the feature code in front of the phone number (e.g., *72 555 1212)

See “Network feature setting” on page 46 for more details.

Press

forwarding

Scroll to desired call forwarding feature

below)

Highlight

Enter phone number at

4 4 2 (

)

and press

Activate

Settings

Select

and press

Number:

Network services

(or press

(see options

locate number in phone book) and press

Your phone will attempt to call the network to

confirm the feature code you entered in Menu 4 4 5

see “Network feature setting” on page 46

(

Once the feature code had been confirmed, the

feature is activated

Call forwarding options

Forward all calls

Forward if busy

forwards all incoming calls.

forwards calls only when you’re on the

phone.

Forward if not answered

forwards calls if you don’t

answer.

Forward if out of reach

forwards calls if you are out of

the serving wireless network.

Cancel all call forwarding

cancels all call forwarding

options you have active.

)

Call

Call log

This feature automatically keeps track of numbers you’ve dialed, numbers that have called you, and the amount of time you’ve spent on calls.

Using call log

Press

Scroll to one of the following options, then press

Select

2-1

2-2

2-3

2-4

2-5

You can dial any of the phone numbers by pressing

Tip:

while the number is on the display.

The ‘Options’ soft key

When you access

and press

calls

your phone’s display.

Call time

first connected (if clock has been set)

Edit number

allows you to save the number into your phone

Save

book.

will erase the number from the call list.

Erase

View number

stored in the phone book and the name is displayed instead of the number.

2 (

Missed calls

Dialed calls

Received calls

Clear call lists

Call timers

Options

shows the date and time when the call was

allows you to edit the dialed number.

will appear only if the number has been

)

Call log

See page 45

See page 33

See page 54.

See page 30.

See page 24.

Dialed calls, Received calls

, a list of options will appear on

, or

Missed

Call restrictions

This feature allows you to restrict incoming and outgoing calls to and from certain numbers.

See “Restrict calls” on page 55 for details.

Call settings

This feature allows you to access and activate some of your phone’s features.

Using call settings

Press

Press press

4-1-1

4-1-2

4-1-3

4 1 (

to reach one of the following options, then

Settings

Call settings

)

Select

See page 35

Emergency key 9

Automatic redial

See page 28

Calling card

See page 18

Call timers

Your phone automatically keeps track of the amount of time you’ve spent in calls.

Press

timers

Scroll repeatedly to access the following options

Last call

All calls

timers have last been reset (

on how to clear call timers

2 5 (

Call log

Call

)

displays call duration of last call.

displays call duration of all calls made since

see page 30 for details

Life timer shows duration of all calls; this can not be

page 41

(see

reset

Clear timers

see page 30

timer (

clears all call timers except the Life

These call durations are for the currently-selected NAM (phone number). Your phone has separate timers for each NAM your phone uses, except for the Life timer.

See “NAM selection” on page 45 for details on NAM.

Note: The actual time invoiced for calls by your service provider may vary, depending upon items such as network features, rounding off for billing, and taxes.

Call waiting

If you have subscribed to Call Waiting, your phone will beep during a call let you know you have an incoming call. Your phone may also display the incoming caller’s identification (

Answering an incoming call with call waiting

Press

Swapping between two calls

Press

Ending the calls

Press

Activating call waiting

You can also activate this feature with your phone; simply ask your service provider for the feature code, store it into your phone, then activate it.

Note: This feature may not appear in your phone’s menu until the feature code has been stored.

See “Network feature setting” on page 46 for more details.

Press

waiting

Scroll to

press

Your phone will attempt to call the network to con-

firm the feature code you entered in Menu 4 4 5

see “Network feature setting” on page 46

(

see “Caller ID” on page 27

to end the current call.

4 4 3 (

)

Activate

Settings

(or select

Network services

to cancel and

Cancel

Call

)

Once the feature code has been confirmed, the

feature is activated.

Caller groups

You can create groups of names in your

(see page 49

, and give each group a different ringing

)

Phone book

tone. Then you’ll know when someone from that group is calling you because of the way the phone rings.

Adding names to a caller group

Note: The names and numbers that you add to a group must already be stored in your phone book. See “Storing a name and number” on page 50.

With the display clear, press

name or number you want, or choose then press

Press

Use

, if shown, or skip to Step 3

Details

Options

to reach

to reach the group to which you want to add

Caller groups

this name or number. Press

until you see the

Name

. Press

Select

Defining a ringing tone for a caller group

With the display clear, press

Press

to reach

Use

to reach the group you want. Press

Press

until you see

. Use

Select

Caller groups

to reach the tone you want to hear

Names

. Press

Group ringing tone

Select

. Press

when anyone from this group calls you. Press OK.

: You can set your phone to ring

Tip

only

when people from certain caller groups call you, and to otherwise be silent.

See the “Caller group” description under “Ringing options” on page 57.

and

Select

Renaming a caller group

Follow steps 1-3 in

“Defining a ringing tone for a

caller group”

Press

until you see

Enter the group name

Rename group

(see “Entering letters and

numbers” on page 35 for details)

. Press

and press

Removing names from a caller group

Follow steps 1-4 in

to reach

Use

“Adding names to a caller group”

No group

. Press

Select

Caller group graphics

When someone calls you from a particular caller group, your phone can display a graphic to identify which caller group that person is calling from.

Press

Scroll to the caller group you wish to display the

graphic for and press

Scroll to

Scroll to On to display the graphic that goes with

, scroll to

Names

Group graphic

Caller groups

Select

and press

, then press

Select

that particular caller group

Caller ID

Caller ID is a network service that can display the name and phone number of the person calling you, if the information is available. Contact your service provider for details.

If the caller can be identified,

phone may display the

the

caller’s name and phone number. The information displayed depends on the information available through the network and your phone book. It is possible that only the name or the number will appear.

Call - caller ID unavailable

will display when the wireless

network doesn’t recognize the calling number. Also,

Call - caller ID blocked

may display if the calling party

has blocked caller ID.

Select

Calling card

If you wish to use a calling card for long distance calls, you must first store your calling card information into your phone. Your phone can store up to four calling cards.

Storing your calling card

Press

card

Scroll to desired calling card and press

Press

Enter security code and press

Press

)

Select

4 1 3 (

or V to

Settings

Edit

, press

Call settings

Dialing sequence

Options

. Select the dialing

sequence your card uses (use chart below), press

or V to choose sequence, then press

Note: The order of the following steps may vary, depending on which dialing sequence your card uses.

Enter access number when prompted for the cal-

ling card’s access number (usually the 1-800 number listed on the back of the calling card), press

Note: You can also retrieve the access number from your phone book if it has already been stored. Simply press or

V to find the number.

Enter card number and/or PIN when prompted to

enter calling card number and personal identification number, then press

changes

Press

or V to

Card name

Press OK again at

OK.

and press

Select

card name using your phone’s keypad, press OK.

See “Entering letters and numbers” on page 35 if you need help on entering the card name

Calling

Select

, then W

. Enter

Save

For details about your phone’s security code, see “Security code” on page 60.

Dialing

Sequence

Access no. + phone no. + card no.

Access no. + card no. + phone no.

Prefix + phone no. + card no.

Use for cards that

require you to:

Dial 1-800 access number, then phone number, then card number (+ PIN if required)

Dial 1-800 access number, then card number (+ PIN if required), then phone number

Dial the prefix (any numbers that must precede the phone number) and phone number

Cards

using this

sequence*

MCI, AT&T True

Choice, Sprint

Canada, Unitel

networkMCI,

WorldPhone MCI

GTE, PacBell,

AT& T, St entor

you want to dial, then card number, (then PIN, if required)

*These calling cards are frequently used with these dialing sequences. However, they may vary and are subject to change at the phone company’s discretion.

Choosing a calling card to use

Press

card

Scroll to desired card and press

Press

Enter security code at

Your phone will display

4 1 3 (

)

or V to highlight

Settings

Call settings

Select

Security code:

Card ready for use

Options

and press OK.

, press

Calling

Making calling card calls

Enter the phone number, including any prefix (such

as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.

Press and hold

phone displays

for a few seconds until your

Card call

Listen for the tone, then press OK. (Your phone will

display

Wait for tone, then press OK)

Listen for the tone again, then press OK. (Your

phone will display

Note: This procedure may not apply to all calling card options programmed into your phone. Please look at the back of your calling card or contact your long distance company for more information.

Wait for tone, press OK again

Change lock code

This feature allows you to change your lock code.

See “Changing your lock code” on page 42

Change security code

This feature allows you to change your security code.

See “Changing your security code” on page 61.

Clear call lists

This feature will clear all dialed numbers, as well as numbers of answered calls and missed calls. You can not undo this operation, so be careful.

Also, see “Call log” on page 23.

Press

Highlight either

press OK (

2 4 (

will clear all call lists, while the others

All

Call log

Clear call lists

All, Missed, Dialed

, or

)

Received

clear their respective call lists)

and

Clear timers

This feature clears all call timers for the currently-selected

See “Call timers” on page 24 for more details.

NAM.

Press

Enter security code at

2 5 4 (

Call log

Security code:

Call timers

Clear timers

and press

)

: Clearing call timers can not be undone. If you are

Careful

using the call timers to log or track the amount of time you are using your phone, you may wish to record the call timers before you erase them.

Note: The Life timer contains important warranty information and can not be reset. See “Life timer” on page 41 for details.

Clock

Your phone has an internal clock that can be displayed or hidden. It also features an alarm clock

(see page 16)

Note: The clock is powered by your phone’s battery. If your clock has been activated and you remove the battery while your phone is still on, you will need to reset the time after you turn your phone back on.

However, if you first turn your phone off before removing the battery, your phone will retain the time and date it had before the battery was removed.

Setting the clock

Press

Scroll to

Enter present time at

4 2 1 (

Adjust time

Settings

Phone settings

and press

Time:

Select

(use two-digit fields for

hours and minutes)

Press

Select am or pm and press OK (if am/pm format has been selected; see below)

Clock

)

Selecting time format

Press

Scroll to

Scroll to either

Press

4 2 1 (

Time format

Settings

24-hour

Phone settings

and press

am/pm

Select

Clock

)

Displaying or hiding the clock

Press

Scroll to either

will display depending on the current setting)

Press

Conference call

This feature allows you to add a third party to a call. You can use this feature with local and long distance calls.

Note: This feature may not be available in all wireless systems. See your service provider for details and availability.

Making a conference call

While in a call, enter (or recall from the phone book)

the second phone number and press

Once the third party answers, press

nect all three parties

Press

party. Press

Recalling a number from the phone book during a conference call

During the call, press

Scroll to

Press

Enter name and press OK, or just press

scroll through the phone book

Press

Select

4 2 1 (

Hide clock

Settings

Phone settings

Display clock

again if you wish to disconnect the third

to drop both parties.

Options

and press

Names

Select

Clock

(only one

to con-

or V to

)

Current call timer

This feature displays the running elapsed time on your screen while a call is active. Once the call has ended, simply press any key to clear the display.

Also, see “Call timers” on page 24.

Activating the current call timer

Press With

, and press

Customer care contact number

With the press of a single button, you can quickly attempt calls to your service provider. This feature can be helpful if you’re having difficulties dialing a number, especially when traveling outside your home area.

Simply press and hold the 2 key and your phone will attempt to call a customer care operator in the area.

Note: This may not be available on all systems. Contact your service provider for availability.

Customize profiles

This feature allows you to customize individual Profiles.

See “Profiles” on page 53 for details.

Dialed calls

Your phone automatically stores the last 10 numbers you’ve dialed.

You can also access the last 10 dialed numbers if you press the list.

Also, see “Call log” on page 23 for details on other call lists.

2 5 (

Current call timer

Press

calls

Press

)

or V to scroll through dialed numbers list

to dial the number you wish to call

, then quickly press W or V to scroll through

Call log

displayed, press

2 2 (

Call log

Call timers

Dialed

) and press

Select

Details

, scroll to

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23.

Earpiece volume

The scroll keys on

phone will adjust the earpiece

your

volume during a phone call. The top scroll key increases while the bottom one decreases the volume.

If an accessory like a headset or a car kit, or one with its own loudspeaker, is connected to your phone, the scroll keys will adjust the volume for that accessory.

Note: Using the scroll keys to adjust earpiece volume functions only during phone calls.

Emergency calls

Before attempting any emergency calls, see “Making an Emergency Call” on page 82 for important safety information.

If the phone is not on, switch it on

Press the

key to ready the phone for calls.

(Press it twice if there are still digits on the display.)

Key in the emergency number for your present

location (e.g. 911 or other official emergency number). Emergency numbers vary by location.

Press

IMPORTANT!

This phone, like any cellular phone, operates using radio signals, cellular and landline networks, as well as user-programmed functions which can not guarantee connection in all conditions. Therefore, you should never rely solely upon any cellular phone for essential communications (e.g., medical emergencies).

Remember, to make or receive any calls, the phone must be switched on and in a service area with adequate cellular signal strength.

Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with local cellular service providers.

If certain features are in use (keyguard, restrict calls, etc.), you may first need to turn those features off before you can make an emergency call. Consult this document and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your cellular phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.

Emergency key 9

With this feature on, the phone attempts to make an emergency call when you press 9, then

. The phone

dials the emergency number pre-programmed into your phone.

Note: You can also dial an emergency call by pressing and holding 9 until the phone indicates it is attempting to make an emergency call. However, this method does not work when Keyguard is active or when the phone is connected to a modem.

Activating Emergency key 9

Press

key 9

4 1 1 (

Settings

Call settings

), scroll to On to activate or

Emergency

to cancel, then

Off

press OK.

IMPORTANT!

Official emergency numbers vary by location (e.g. 911). Only one emergency number is programmed into your phone to be dialed automatically by Emergency key 9, which may not be the proper number in all circumstances.

Entering letters and numbers

You can enter letters, as well as numbers, when storing information into your phone by using your phone’s keypad. When you see the letter you wish to enter, simply press the key associated with that letter until it appears on the display (numbers also appear).

ABC mode

When you need to enter letters into your phone, it will automatically switch over to mode.

Your phone displays the icon to indicate that your phone is in ABC mode. It also displays when you are viewing names rather than numbers.

When is displayed, you can enter these characters:

Key Characters Key Characters

1.,’?!-1 7PQRS7

2ABC2 8TUV8

3 DEF3 9 WXYZ9

4 GHI4 0 Enters an empty space, 0

5 JKL5 * (See next page)

6 MNO6 # Changes letter case; long

press toggles between ABC/abc and 123 mode

While you’re editing a name, the cursor to the left, and Press

to correct any mistakes.

Clear

will move it to the right.

key will move the

If you wish to enter an empty space between characters, press 0 for each space.

Changing letter case

Press the # key to switch between upper and lower case letters. The icon will switch to to indicate you are using lower case.

123 mode

When storing names to the phone book, you can enter a number within a name at any time. Simply press that particular number key a few times until it appears.

However, you can do this more quickly by accessing the mode, without having to scroll through each letter to access the number you wish to enter.

Simply press the # key for about 2 seconds while in

mode and the icon will appear. While in this mode, only numbers can be entered. Letters can not be entered unless your phone is in mode.

Press the # key again for a couple of seconds if you wish to deactivate the mode.

Special characters (for storing names)

Whe n in ABC mode (

see page 16

), you can press the ∗ key and the following special characters will appear. You can use these characters to help when storing names in your phone book. Simply press highlight the one you wish to use and press

or V to

Insert

. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥

: If you wish to access a special character that

TIP

appears toward the end of this list, press

for quicker

access.

Special Characters (for storing numbers)

The following special characters are helpful when you store names to your phone book (

see page 49

). Simply press the * key once or repeatedly, and the following characters can be stored within the number sequence.

(p) creates a pause when a number is dialed; the digits located to the right of the “p” are automatically sent as touch tones after a 2.5 second pause

see page 68

(

(w) creates a “wait” when a number is dialed. The “w” makes your phone wait for you to press

, then it sends the digits located to the

Send

right of the “w” as touch tones (

see page 68

You can add as many special characters as you need in a single number sequence. These characters can not be entered while in mode.

Erasing stored names and numbers

See “Erasing stored names and numbers” on page 51.

Erasing your entire phone book

See “Erasing your entire phone book” on page 51.

Games

You have four exciting games to choose from in your phone. Press

6 to choose one of the following

games:

REMEMBER! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Memory

Reveal pictures to find pairs in as few tries as possible. Move the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys. Press the 5 key to reveal pictures. Press the # key to jump right over revealed pictures or move from top left to bottom right. Press the ∗ key to jump left over revealed pictures or move from bottom right to top left. Once found, pairs stay visible.

Snake

Feed the snake with as many goodies as possible and watch it grow. Use keys 2, 4, 6, and 8 to turn the snake toward food. The longer the snake’s tail grows, the higher the score. If the snake hits its own tail or the surrounding wall, the game is over.

Logic

Find a secret combination of figures. Available figures are shown at the top of the display before you accept the first guess row. Use the 2, 4 and 8 keys to move the cursor and the 5 key to select the figure. To copy a figure from a previously accepted guess row, start scrolling with the 4 key, move the cursor to the desired figure in the normal way and accept the selection with the 5 key.

Once you think you have the right combination, press the * key. The result is presented as a set of marks over the row. A correct figure in the right place gives a full mark; a correct figure in the wrong place gives a half mark. The game ends when all the figures are correct and in the right place.

Dice

Use this to play other games that require a set of dice if one isn’t available. Use the

option to set the num-

Level

ber of dice, up to six. You can roll, lock, and unlock each die as many times as you wish.

When you start a new game, the dice roll for a couple of seconds and then stop. Use the 4 (left) and 6 (right) keys to select a die. Press the 5 key to lock or unlock the selected die.

Press ∗ to roll the unlocked dice again.

Game options

When you select a game, you can choose from the following submenus:

allows you to choose the level of difficulty.

Level

New game

Top score

Logic

Instructions

Note: game is interrupted, not finished, or if you have lost the game.

starts a new game.

will display the top score (

will describe how the game is played.

Last view

may appear in the options list if a

Continue

does not appear in

Inbox

When you receive a text message, it’s stored in the Inbox. Your phone will display

Message received

with the text message icon, and makes a sound

depending on the message alert tone; see page 44

(

Please see “Text messages and pages” on page 63 for complete details on this feature.

, along

In-call menu

While in a call, you may notice the

Options

soft key. Pressing this will access you to the in-call menu, and you may notice the following choices:

Touch tones

or search for one in your phone book

You can manually enter a touch tone string

(see “Phone

book” on page 49)

You can make a third party conference call

New call

(see “Making a conference call” on page 32)

Allows you access to your phone’s menu

Allows you access to your phone book

Names

(see “Phone book” on page 49)

Allows you to mute the microphone; if your micro

Mute

phone is already muted, this will change to

End mute

(see “Microphone” on page 44)

Keyguard

This feature helps protect the keypad against accidental keypresses.

See “Want to stop your phone from ringing without answering the call?” on page 9 for complete details.

Keypad tones

This is one of the settings in your phone’s Profiles

see page 53

(

). It sets the volume of the tone you hear

when you press your phone’s keys.

Note that if you choose the

profile, keypad tones

Silent

will be turned off.

Setting the keypad tones

Press

Your phone lists each profile. Use

3 (

Profiles

)

to highlight the

one you want to set the keypad tones for and press

Highlight

Keypad tones

Press

Options

Customize

to scroll through the options; your phone

and press OK. Press

and press

Select

plays a sample of each. Press OK for the one you want.

Language

Because many wireless phone customers speak English as a second language, your phone allows you to choose your phone’s displayed language.

Choosing a language for your phone

Press scroll to the language you wish to use and press OK.

You can choose from English, French, Spanish, Portuguese or Traditional Chinese.

Last call timer

This feature displays the duration of your last call.

See “Call timers” on page 24.

Last number redial

When you want to call your last dialed number,

Note: You must be at the start screen before you press ó

Letter case

You can change from upper to lower case when entering letters into your phone.

See “Changing letter case” on page 36 for complete details.

Press

4 2 5 (

Settings

and wait 3 seconds

Phone settings

Language

Life timer

The life timer displays the total time of all calls dialed and received with your phone (in hours and minutes only). The life timer can not be reset and is used in conjunction with your phone’s warranty

Also, see “Call timers” on page 24.

Lights

This is one of the settings in your phone’s

see page 53

(

). This feature determines whether the

Car

lights are on only when you use your phone, or if they are on at all times. This setting works only when your phone is connected to a car kit.

Press

Your phone lists each profile. Use

and press

Note:

Car

connected to a car kit at least once.

Highlight

highlight

Use

If you select

3 (

Options

will not appear in the list until the phone has been

Customize

Lights

to scroll through your choices and press

Automatic

)

Profiles

to highlight

and press OK. Press

and press

Select

, your phone’s lights are turned off within fifteen seconds if no keys are pressed. If On is selected, then the lights will remain on the entire time your phone is connected to the car kit.

Listen to voice messages

This feature allows you to access your voice messages.

See “Voice messages” on page 70 for complete details.

Lock code

You’ll need the lock code to activate and deactivate Phone Lock (see

page 51

), or to change your lock code. The default lock code is 1234. If you enter an incorrect lock code five times in a row, prompt you for the security code (see

phone will

your

page 60

Profile

Car

Changing your lock code

In a lock code, only numeric characters are accepted.

Enter

Access codes

Enter lock code at

4 3 2 3 (

Settings

Change lock code

Enter lock code:

Security settings

)

and press

Enter new lock code, press

Verify new lock code, press

Note: When you change your lock code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.

Manual touch tones

This setting determines how long touch tones are produced as you press the keys on the keypad. Note that touch tones are sometimes called DTMF tones.

See “Touch tones” on page 67 for details.

Setting manual touch tones

Press

tones

following options, then press

4 2 3 1 (

Manual touch tones

Continuous

means the tone sounds for as long as

Settings

Phone settings

) and highlight one of the

OK.

you press and hold the key.

sets the tone length to .1 second, regardless

Fixed

of how long you press the key.

turns the tones off, and no tones will be sent

Off

when you press the keys.

Memory status

This feature allows you to see how many free and in-use memory locations are in your directory.

Also, see “Phone book” on page 49.

Press Then scroll to

Names

, scroll to

Options

Memory status

and press

Select

Touch

again

Messages

This feature allows you to access your voice and text messages, as well as composing your own welcome note.

Using messages

Press

Scroll to one of the following options, then press

1 (

Messages

)

Select

1-1

Text messages

1-2

Voice messages

1-3

Welcome note

See page 63

See page 70

See page 72

Message alert tone

This is one of the settings in your phone’s Profiles

see page 53

(

). It sets the tone that your phone makes

when you get a text message.

Also, see “Text messages and pages” on page 63.

Press

Your phone lists each profile. Use

3 (

Profiles

)

to highlight the

one you want to set the message alert tone for and

press

Highlight highlight

Use

Options

Customize

Message alert tone

and press OK. Press

, then press

to scroll through your choices (your phone

plays samples) and press OK.

Microphone

You can mute and unmute your phone’s microphone while a call is in progress. During a call, your phone’s soft keys change from

Mute

Names

and

Options

Select

and

Muting and unmuting your phone

You can mute the phone’s microphone during a call; simply press

Unmute

If these texts are not available, press

Mute

End mute

. To unmute the microphone, press

Mute

Options

and press

Select

, scroll to

Muting and unmuting also affect the microphones of any accessories connected to the phone.

Missed calls

Your phone will keep track of the last 10 calls you have missed if you weren’t around to answer the call. Missed calls will appear in your phone only if it was turned on and in a service area when the call was missed.

If the display says ‘Missed calls’

Press

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23.

Checking the missed calls list anytime

This shows you the phone numbers of the 10 most recent calls you’ve not answered.

When the Forwarding feature ( phone treats the forwarded calls as missed calls.

Also, see “Call log” on page 23 for details on other call lists.

NAM selection

The service provider programs your phone with the phone number and system information into your phone’s memory when your phone is first activated. This is called a Number Assignment Module (NAM).

For example, your phone can be activated in up to 3 different service areas (e.g. one in Dallas, another in Chicago, and maybe one more in New York), each giving your phone a different phone number or account.

Only one number can be active at a time. When you select a phone number, you’re also selecting which system you’re using as your home system (

tem” on page 63

with this menu is the currently selected number.

. To call back the displayed number, press

List

. Press

Press through the list.

to go back to the start screen.

Exit

2 1 (

Forward if not answered

). The first phone number displayed

Call log

see page 22

Missed calls

option in the Call

) is selected, your

), then scroll

see “Sys-

Note: It may not be necessary to have three NAMs for your phone if your service provider has service or roaming agreements for each area in which you wish to use your phone. Contact your service provider for details.

Selecting the NAM for your phone

Press

selection

4 4 6 (

Settings

Network services

), highlight the phone number you want to use

and press OK.

Note: You need at least one active number to make calls. You can not change from one NAM to another during a call.

Network feature setting

Call forwarding (

page 22

Send own number (

), Call waiting (

page 61

) are network services

page 25

available through your service provider or dealer.

When you subscribe to any of these services, your service provider or dealer gives you a separate feature code to activate each service. Deactivation codes are used to deactivate each service.

Once you store the appropriate code in your phone, the service appears as a menu item. You can then use the menu to activate and deactivate these services.

Each time you use a feature that requires a feature code, that code is sent to the network to verify you’re using the correct feature code.

Note: If your phone has more than one phone number programmed, any feature codes stored will apply only to your primary phone number, or NAM 1.

See “NAM selection” on page 45 for details on NAM.

NAM

) and

Storing codes

Press

Network feature setting

Feature Code:

4 4 5 (

Settings

Network services

)

, enter the feature code or deacti-

vation code received from your dealer (e.g. ∗74,

740, etc.), press

∗

to the service that the code applies to and press

Select

to suboption, then

(Repeat step as

Select

required, based on number of suboptions)

(Use step four only for call forwarding options)

5. W

Activate

Cancel

, then press

Network services

Some of the features in this menu are network services that require a subscription. See your service provider for details and availability.

4-4-1

Voice privacy

4-4-2

Call forwarding *

4-4-3

Call waiting *

4-4-4

Send own number *

4-4-5

Network feature setting

4-4-6

NAM selection

These features will not appear in the menu unless they are

activated using ture setting” on page 46 for details.

Network feature setting

See page 71

See page 22.

See page 25

See page 61

See page 45

See page 46

. See “Network fea-

One-touch dialing

This feature allows you to make phone calls quickly and easily with the touch of a button.

You must store names and numbers in your phone

see page 50

book (

) before you can use this feature. Then you can assign a name from the phone book to a one-touch dial location using your phone’s keys 2 through 8.

Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox (see page 70) and for attempting emergency calls (see page 82) to the emergency number programmed into your phone (e.g. 911 or other official emergency number). The 2 key is for dialing a customer care operator (see page 33), which can be overwritten if you prefer.

Assigning one-touch dial locations

Press

Names,

scroll to

1-touch dialing

and press

Select

Scroll to next available empty location,

appear, then press

Scroll to select desired name and press

Repeat as necessary

Assign

(empty)

Select

will

Calling a number using one-touch dialing

Note: The 2 key is for dialing a customer care operator, which can be overwritten if you prefer.

Press and hold the key (2 through 8) for a few seconds to call the number in the corresponding one-touch dial location.

Note: If you press and hold 1, your phone calls your voice mailbox. If you press and hold 9, and Emergency key 9 (Menu 4 1) is

, your phone attempts a call to the emergency number

programmed into your phone (e.g. 911 or other official emergency number).

Changing numbers in one-touch dial list

With this feature, you can assign a different number to any one-touch dial location.

Press

Names,

scroll to

1-touch dialing

and press

Select

Scroll to the location you wish to change and press

Options

Scroll to

Scroll through phone book to select new number

and press

Change

Select

, then press

Select

Erasing one-touch dial locations

Press

Scroll to the location you wish to erase and press

Names,

scroll to

1-touch dialing

and press

Options

Scroll to

Erase

, press

, then press OK at

Select

Erase?

Select

Outbox

This is where all outgoing messages are stored.

See “Text messages and pages” on page 63 for more details.

Paging

You can receive pages with your phone.

See “Text messages and pages” on page 63.

Phone book

You can store up to 199 numbers and associated names in your phone’s memory. These numbers are right at your fingertips for easy dialing.

Things to know about the phone book

Stored numbers may be up to 32 digits long.

Stored names may be up to 16 characters long.

You can not store identical names into your phone (i.e., John, John); make sure that like names are somewhat different in the phone book (i.e., John, Johnny).

followed by the currently stored name displays

Replace?

when storing a name already in memory.

Accessing the phone book

Press

Select

, scroll to desired submenu and press

Names

About the submenus

The phone book has several submenus from which you can choose.

allows you to search for a specific name.

allows you to enter new names and numbers.

Add new

lets you choose your scrolling view, as well as

Options

to show memory status.

1-touch dialing

touch dial locations (

Caller groups

tone for a caller group

allows you to assign up to seven one-

see page 47 for details)

allows you to rename or change the ringing

(see“Caller groups” on page 26)

lets you erase every name and number in your

Erase all

phone book. You can erase one name and number at a time by pressing

Details

, then

Options

when viewing a

name already in the directory.

Storing a name and number

Press

Names

Scroll to

Add new

and press

Select

Enter name using the keypad

(use # to switch between upper and lower case) and press

Enter phone number and press

Also, see “Entering letters and numbers” on page 35 and “Quick save” on page 62.

Changing a number stored with a name

Recall stored name, then press

Details

to view

number

Press

Press OK while name is displayed, unless you wish

to change it. If so, press and hold name and press

Press and hold

and

Enter new number

Press OK to save new number

, scroll to

Options

Clear

keys to edit

and press

Edit

Clear

Select

, re-enter

to erase number or use the

Recalling names & numbers

At the start screen, press

or V to view names in

directory. T hen scroll to the person you wish t o call and press

to dial the number (phone will display

number dialed to confirm).

Recalling numbers by name

At the start screen, press

. Then press the

Names

number on the keypad with the corresponding first letter of the name you wish to call.

You can also recall numbers by name by pressing

Names

, then press

Select

. Enter the name of

the person you wish to recall and press OK.

Erasing stored names and numbers

Recall stored name

Press

Note: You can not undo Erase functions, so be careful!

Details

Press

Options

Highlight

Erase

, then press

Select

, then

Erasing your entire phone book

Press

Names

Scroll to

Erase all

Press OK at

and press

Are you sure?

Enter security code at

Select

Security code:

and press

Warning: This feature will erase your entire phone book, which can not be undone!

Phone lock

When you turn this on, your phone will lock after you switch your phone off and back on. Then, each time you turn your phone on, it will prompt you for a lock code when you press either

Names

When the phone lock is on, you can not access most of your phone’s memory and menu features, or make phone calls without entering the lock code.

Turning on phone lock

Press

codes

Phone lock

4 3 2 1 (

Settings

Security settings

). Enter the lock code then press OK.

Then scroll to On, and press OK again.

Access

When your phone is locked, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number) including calls with Emergency key 9 (

You can also store a number in the

number location

even though your phone is locked (s

details

Answering a call with phone lock on

Press any key except

Turning off phone lock

Press

codes

Then scroll to

With phone lock off, you can now use your phone without entering the lock code each time you turn your phone on.

Phone settings

Phone settings allow you access to other phone features such as an alarm clock and your phone’s language.

Using phone settings

Press

one of the following options, then press

4-2-1

4-2-2

4-2-3

4-2-4

4-2-5

, which allows you to call this number

4 3 2 1 (

Phone lock

). Enter lock code and press OK.

and press OK again.

Off

4 2 (

Settings

See page 31

Clock

Alarm clock

Touch tones

Restore factory settings

Language

page 35

Settings

Phone settings

See page 16

See page 67

See page 41

Unlocked phone

ee page 69 for

and

Security settings

), then scroll to

Select

See page 54

Access

Profiles

Now you can adjust and customize your phone to whatever environments you find yourself in (i.e. meetings, a movie, etc.). With Profiles, you can control your phone’s ringing volume, ringing tone, message alert, keypad tones, warning and game tones, etc., in a matter of seconds.

Note: Restore factory settings (see page 54) will reset any changes made in Profiles back to the factory defaults. The default setting is

Normal

Accessing Profiles

Press

Selecting different Profiles

If you want to change your phone’s Profile, quickly press the key. Quickly press again to scroll through each choice, then press and hold the key for a second to select that Profile.

You can also scroll through the list of Profiles with a quick press of the key. Then press

or V to choose

another Profile and press OK.

Either way, this only allows you to select other Profiles; you can not customize them here. Keep reading to learn how to customize a Profile.

Customizing Profiles

Press press

Once

Menu Options

Options

3 (

Profiles

is selected,

) and scroll to desired Profile, then

Select, Customize

and

Rename

will appear as your choices. Once you have selected one of these items, press OK. If you wish to go back to the main menu, press

activates the currently highlighted Profile.

Select

Back

Customize

allows you to customize a Profile by changing

the current settings.

allows you to rename the Profile.

Rename

When you select

Customize

, press OK and you’ll have access to several lists and sub-menus that will enable you to adjust the settings on the current Profile.

Note:

and

Car

your phone is connected to a car kit or a headset. However, they will remain in the menu once connected for the first time.

Note: When you change a setting in the current Profile, it only affects that Profile and will not change your phone’s normal settings.

will not appear in the Profiles list unless

Headset

Renaming profiles

Press

Scroll to desired Profile and press

Scroll to

Enter new name and press OK again

Note: Some profiles can not be renamed.

Rename

3 (

Profiles

)

and press

Options

Received calls

This shows you the phone numbers of the 10 most recent calls you’ve answered.

Press

2 3 (

Call log

Received calls

), then scroll

through the numbers.

Also, see “Call log” on page 23 for details on other call lists.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23

Restore factory settings

You can reset the settings of many of your phone’s features to factory defaults (as in a new telephone).

Restoring factory settings

Press

factory settings

Note: The memory, timers, language selection and security code is not reset. However, any Profiles you have modified will reset when you restore your settings.

4 2 4 (

Settings

Phone settings

), enter security code and press OK.

Renaming profiles

See “Profiles” on page 53.

Restrict calls

This feature allows you to restrict incoming and outgoing calls. Outgoing calls are restricted from a list of restrictions that you create yourself.

Restrict outgoing calls

If no restrictions have been defined in your phone, you will notice only one option:

Add restriction

allows you to create your own list of outgoing call restrictions. The maximum number of call restriction groups you can define is 10.

Once you have entered

Add restriction

and have added at

least one restriction, the following options will be added:

allows you to select call restrictions from the

Select

outgoing calls list.

allows you to edit an existing outgoing call

Edit

restriction.

will erase any existing outgoing call restrictions.

Erase

Note: When calls are restricted, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency numbers). However, Emergency key 9 may not operate depending on the type of restriction you choose.

Restore

Adding call restrictions

Press

Restrict calls

4 3 1 (

)

Settings

Security settings

Scroll to

Restrict incoming calls

Restrict outgoing calls

Enter the security code and press

Scroll to

Add restriction

restriction and press

Enter the number string you wish to restrict and press OK. For example:

If you wish to restrict all calls that begin with 1, enter 1 (this will restrict all long distance calls)

If you wish to restrict all calls that begin with 1972, enter 1972

If you wish to restrict all calls that begin with 214, enter 214

If you wish to enter a name for the call restriction, enter the name using your phone’s keypad, then press

Press

Restrict calls

Scroll to

Enter security code, then press OK.

Scroll to if you wish to remove the restriction)

Press

4 3 1 (

)

Restrict incoming calls

All calls

and then press

Back

Settings

and press

to create an outgoing call

Security settings

and press

(or press

Mark

Yes

Save changes?

Select

Unmark

Selecting call restrictions

Press

Restrict calls

Scroll to

Enter the security code and press

Scroll to

Scroll to each restriction you wish to use and press

Mark

Press

4-3-1 (

Restrict outgoing calls

Select

; press

Back

Settings

)

and press

to deactivate existing restrictions

Unmark

and then press

Security settings

and press

Yes

Save changes?

Select

Editing call restrictions

Press

Restrict calls

Scroll to

Enter the security code and press

Scroll to

Scroll to the restriction you wish to edit, press

4-3-1 (

Settings

)

Restrict outgoing calls

and press

Edit

Security settings

and press

Note: If no name has been entered for a restriction, the restricted number will be displayed

Press and hold

enter the new characters. Or use

to erase entire number, then

Clear

or V to move

Wý

the cursor to the desired location and delete a character or insert additional characters. Press OK when finished.

Edit name if desired using same procedure as

above

Erasing call restrictions

Press

Restrict calls

Scroll to

Enter the security code and press

Scroll to

Scroll to the restriction you wish to erase, press

Press OK again to erase restriction

4-3-1 (

Settings

)

Restrict outgoing calls

and press

Erase

Security settings

and press

Select

Ringing options

This is one of the settings in your phone’s Profiles

see page 53

(

). You can choose how your phone notifies you of an incoming call. This setting does not affect incoming text message alert tones (

see page 63)

Selecting ringing options

Press

3 (

Profiles

)

Your phone lists each profile. Use

one you want to set the ringing options for and press

Highlight

Ringing options

Highlight either

once, Caller groups

Caller groups

from people in selected caller groups

groups” on page 26)

Press

or V to highlight the desired caller group(s),

then press

Options

Customize

and press OK. Press

, then press

Ring, Ascending, Ring once, Beep

, or

sets the phone to

to select or

Mark

Silent

Unmark

Select

and press

except for calls

Silent

(see “Caller

to de-select them.

Ringing tones

This is one of the settings in your phone’s Profiles (

page 53

). It sets the ringing tone for incoming voice calls.

If you set

once

Ringing Options

, ringing tones are automatically off.

see page 57

(

) to

Selecting ringing tones

Press

Your phone lists each profile. Use

3 (

Profiles

)

one you want to set the ringing tones for and press

Options

Highlight

Customize

Ringing tones

Scroll through the options. After you hear the tone

and press OK. Press

, then press

Select

you wish to use, press OK.

to highlight the

see

Silent

Beep

to highlight the

Ringing volume

This is one of the settings in your phone’s Profiles (

see page 53

sets the default ringing volume for incoming voice calls, message alert tones and the alarm.

). It

Setting the ringing volume

Press

Your phone lists each profile. Use

3 (

Profiles

)

to highlight the

one you want to set the ringing volume for and press

Highlight

Ringing volume

Scroll through the options. When you hear the

Options

Customize

and press OK. Press

, then press

Select

volume level you wish to use, press OK.

Note: The ringing volume setting is stored individually for the handsfree car kit and the headset.

Roaming

This is a term used to indicate that your phone is not in its home area. Calls made or received while roaming are usually more expensive than calls made in your home area.

When roaming in some systems outside your home area, your phone may not be recognized by the host system (the one you’re travelling in) and you may not be able to place a call.

Contact your service provider for more specific information on how roaming works with your phone, as well as any information on coverage limitations.

Roaming Indicators

When your phone begins roaming, it will beep once and display

ROAM

EXTENDED AREA

, depending on how roaming works with your phone. Contact your service provider for more details. If your phone is not roaming (i.e. in its home area) it will either display

HOME

name of the service provider.

or the

Saved

This is where saved text messages are stored.

See “Text messages and pages” on page 63 for details.

Scrolling view

There are three different options on how you can view the phone book. Your choices are:

Name list

shows all stored names in a scrolling list. Three names will appear at any given time. To view other names in the directory, scroll back and forth through the list using

or V.

Name list

is the default

setting.

Name+number

displays individual names and numbers stored in your directory. Only one name will display on your screen at a time, with the corresponding phone number. Use

Name only

names, use phone number by pressing

or V to view other names.

shows individual names only. To view other

or V. You can view the corresponding

Details

, then

or V.

Selecting your scrolling view

Press

Names

Scroll to

Options,

Press

Select

Press

or V to select either

Name+number

then press

Scrolling view

, or

Name only

Select

Name list

, then press

Security settings

This menu includes the following security features:

4-3-1

4-3-2

The

Access codes

page 51

(

lock code

Restrict calls

Access codes

Unlocked phone number

page 42

(

See page 55

See page 16

submenu includes

), and

Change security code

Phone lock

page 69

(

Change

page 61

(

Security code

Your phone will prompt you for a security code for certain features. These features can be used only after the correct security code has been successfully entered.

Note: When entering your security code, ***** will appear on the display to keep others from viewing your code.

If you make a mistake entering the code, erase the last digit entered by pressing Then enter the correct code or press

, or press and hold

Clear

Back

Clear

to exit the

current feature.

If you enter an incorrect security code (

Code error

will appear) five times in a row, your phone won’t accept any entries for the next five minutes.

Your phone’s default security code is 12345. It’s highly recommended that you change this code at once, write it down, and store it in a safe place away from your phone.

Changing your security code

Press

Access codes

Enter security code and press

Enter new security code at

code:

Enter new security code again at

code:

Phone will display

Note: If you have changed your security code and don’t remember the new code, contact your service provider. Once you have changed your security code, the default setting is no longer valid.

, press

4 3 2 4 (

Settings

Change security code

Security code changed

Security settings

)

Enter new security

Verify new security

Send own number

In most service areas, when you call someone your name will be presented to his/her caller ID (if they subscribe). This feature allows you to block their caller ID (i.e. your number will not be presented) when you call them. This feature works on a per-call basis. Contact your service provider for more details.

Note: Before you can deactivate this feature, you must first store the feature code given to you by your service provider.

Otherwise, this feature may not appear in the menu. See “Network feature setting” on page 46 for more details.

Note: This feature is only effective when calling to a number that is equipped with Caller ID.

Press

own number

it) and press

Enter the number you wish to call (or press

4 4 4 (

Settings

Network services

)

(to show your number) or No (to not show

Yes

to retrieve the number from the phone book and press OK), then press

Your phone will attempt to call this number with

the feature code you stored in Menu 4 4 5

see “Network feature setting” on page 46

(

Settings

This main menu allows you access to other features. See these individual entries for more information.

4-1

Call settings

4-2

Phone settings

4-3

Security settings

4-4

Network services

See page 24

See page 52

See page 60

See page 47

Storing a name & number

You can save names and numbers in the Phone book. Either use the method described in

number” on page 50

or the “quick save” method

“Storing a name and

described below.

)

Send

Quick save

Enter the phone number and press at

Also, see “Entering letters and numbers” on page 35.

if you wish (optional), then press OK.

Name:

. Enter a name

Save

System

Your phone is capable of working in Residential, Private, and Public Systems (such as your Home System). You can choose how your phone selects a network to use.

This feature is

Automatic

, which means your phone automatically

5 in your phone. The default is

searches for networks available to you and chooses the appropriate one. Every time you switch on your phone, it resets this to

If you choose

Automatic

Manual

, your phone searches for networks, then begins displaying them. Your phone displays

AVAILABLE:

it finds (You can not use

key to scroll through the choices, and press OK

the

NOT AVAILABLE:

for the systems

systems). Use

when you see the one you want.

If you choose

New Search

, your phone begins a new search for new Private and Residential systems. When it finds the best new system, it displays it. You can then

, or start another search by pressing

Select it

Note: If you have two phone numbers (two NAMs), the and

New search

phone number (NAM 1). See “NAM selection” on page 45 for more information concerning NAMs.

features are only used with your primary

To switch from private to public

If you are in a private system and want access to a public system, press and hold in a call. Your phone will display

when you are not

Search public systems?

press OK and your phone will use the public system for the next (only once) outgoing call. After that it goes back to

Automatic system selection

Manual

Text messages and pages

Before you can send or receive text messages and pages, you must subscribe to the text messaging network service.

Some or all of these features may not be available in some wireless systems. Please see your service provider for details and availability.

Note: Text messages that you receive with your phone may appear different at times, due to messages that originate in networks other than your own.

Also, the maximum length of a text message may depend on the network’s capabilities.

Text message options

When you access

Text messages

, you will view a screen

with five different options.

is where incoming messages are received and

Inbox

stored. All new, unread messages are kept here.

Write new

Outbox

Saved

Erase all

unread text messages will not be erased. be found quickly when you access pressing

allows you to write text messages.

is where outgoing messages are stored.

is where all saved, read messages are kept.

allows you to erase all text messages. However,

Erase all

Text messages

can

Writing text messages

Note: Writing and sending text messages may not be available in all wireless systems. Please contact your service provider for details.

Sending text messages

Press

Menu 1 1

Scroll to

Write New

and press

Select

Write your message using the keypad and press

Options

To send the text message, press OK with

highlighted

Enter the phone number (or press

in the phone book), then press

Send

to locate

Sending options

If you press

when sending a text message,

Options

you’ll find the following choices:

sends the message

Send

allows you to mark your messages (see below)

Settings

will save your message to the Saved folder.

Save

Clear screen

will clear the message screen.

Message settings

will notify recipient that your message is important.

Urgent

When you receive an

message, the message will

Urgent

be marked with an exclamation point (!) in front of it.

Read receipt

notifies you that the recipient has opened

your message.

Callback no

. will place your phone number within the

message. This is the default setting and it is set to on.

Receiving text messages

Your phone has space for up to 30 text messages, depending on the length of each message.

When you receive a text message

Text messages are shown in the order that they were received, in their order of priority.

Message received

indicates an unread message or page. If more than one message is received, the number of received messages will be listed first.

New emergency message

indicates that the message or page received was sent by someone via the service provider. Emergency messages are sent only in situations where life and/or property are in immediate danger. Emergency messages are listed first and will override all other messages.

messages are also high priority messages.

Urgent

Reading text messages

With

Message received

to new message, then press

Reading options

Press

Options

access the following reading options:

Forwarding a message

Note: This feature is only available if your phone has been activated in a wireless system that supports the sending of text messages.

With the message displayed, press

and press OK. Then send the message as you

Forward

normally would.

Options

, scroll to

Replying to a message

Note: This feature is only available if your phone has been activated in a wireless system that supports the sending of text messages.

With the message displayed, press

and press OK. Then write your reply and send the

Options

, scroll to

message as you normally would.

If a phone number appears in the message you received, it’s used as the default for the reply you’re sending. This can be replaced by another number, if you wish.

Receiving a page

Your phone displays reads

, followed by the name or number of the

Call:

Message received

. The message

person who paged you. Names will appear only if that person has been stored in the phone book.

When your phone’s memory is full

One or more messages, of lowest priority, will automatically be deleted in order to receive new text messages when your phone’s memory is full.

If the message memory is still full, your phone will display

No space: message waiting

You can clear this

notification by pressing OK.

Note: Messages are usually deleted from your emergency message may delete messages from your

folder

Inbox

. An incoming

Saved

Touch tones

Your phone can generate various sounds, called touch tones, when the keys are pressed. These are also known as DTMF tones.

Touch tones can be used for many automated, overthe-phone services such as checking bank balances, airline arrival and departure times, and using voice mailbox options. Touch tones can be sent only when a call is active.

Storing touch tone strings

Touch tone strings can be used for sending and receiving information with your phone. For example, you can store your office voice mailbox number, along with your password for easy access to your messages.

Store touch tone strings the same way you store phone numbers (

see page 50

You can store a whole digit sequence in your phone book and send it as touch tones for frequently-used strings of numbers.

Sending a touch tone string

Make sure Menu 4 2 3 1 (

Touch tones

Manual touch tones

During a call, press

Scroll to

Touch tones

Options

and press

Enter touch tone string or recall string from the

Settings

Phone settings

) is not set to

Off

phone book and press OK

Note: Use caution when sending confidential information over the air when using DTMF tones in analog mode.

Storing touch tone strings with phone numbers

Enter the phone number (e.g. your office voice

mailbox)

Press

Enter the touch tone string (e.g. voice mailbox

∗∗∗

(p) or

∗∗∗∗

(w)

password)

Store the number as you normally would

Note: See “Special Characters (for storing numbers)” on page 37 for details on “p” and “w” characters.

When you dial this number, your phone first dials the phone number, then waits (because of the “w” character) for you to press

. Your phone then

Send

sends your password.

If you include a “p” character instead of a “w”, your phone pauses for 2.5 seconds, then automatically sends your password as touch tones.

Touch tone length

This feature determines the length of each touch tone when they are sent automatically.

sets the tone length to .1 second.

Short

tone length to .5 second.

You can set the touch tone length by pressing 4 2 3 2 (

tone length

Unlocked phone number

When the phone lock is on ( be made. However, you can store one number into your phone that can be called when it’s locked.

Storing the unlocked phone number

Press

Access codes

Enter lock code and press

Enter phone number at

and scroll through the phone book)

Press

Calling the unlocked phone number

Note: Your phone must be locked to use this feature.

Press W or V once, then ó or you can manually enter the phone number as it is stored and press

Settings

Phone settings

see page 51

4 3 2 2 (

Settings

Unlocked phone number

Number:

Long

Touch tones

), no calls can

Security settings

)

(or press

sets the

Touch

Vibrating alert

This is one of the settings in your phone’s Profiles

see page 53

( battery attached, you can set your phone to vibrate when you receive a voice call.

Note: This setting will not appear in your phone unless a vibrating battery has been attached.

). When your phone has the vibrating

Activating vibrating alert

Press

Your phone lists each Profile. Use

3 (

Profiles

)

to highlight the

one you want to set the vibrating alert for and press

Options

Highlight

Vibrating alert

Use

Customize

to highlight On or

and press OK. Press

, then press

Select

and press OK. If you

Off

again.

choose On, your phone will vibrate even if you have set

Ringing options

"The vibrating battery does not vibrate when the phone is connected to or placed in any charging device."

see page 57

(

) to

Silent

Voice mailbox number

This number dials your voice mailbox.

See “Voice messages” in next section.

Voice messages

Voice mail is a network service that may require a subscription from your service provider.

Your phone will notify you when you receive a voice message.

New voice message

will appear on the display along with the icon, and you’ll hear a short beep. Your phone will display the number of voice messages if you’ve received more than one.

Setting up your voice mailbox number

Before you can retrieve any voice messages, you need to store your voice mailbox number. Your service provider usually gives this number to you.

When you’re ready to store your voice mailbox number, press

mailbox number

1 2 2 (

Messages - Voice messages - Voice

). Then enter your voice mailbox phone number and press OK. This number can be up to 32 digits long and is used until it’s changed. So if your phone number changes, you may need to change your voice mailbox number along with it.

to reach

Greetings, passwords, and prompts

These may vary in different wireless systems. So if you need information about how to record your greeting or how to store your password, contact your service provider. You’ll also need to contact them on how to listen to voice messages once you’re connected to your voice mailbox.

Listening to your voice messages

New voice message

is displayed, just press

Listen

follow the prompts. If you’d rather listen to your messages later, press

Exit

You can listen to messages anytime if you press and hold the 1 key;

Calling voice mailbox

will appear on the display. Or if you prefer, you can access your voice mailbox by pressing

messages - Listen to voice messages

1 2 1 (

Messages - Voice

Voice privacy

Note: This feature may not be available in all areas. Please see your service provider for details and availability.

Used only in digital networks, voice privacy encrypts the voice channel so that people can not eavesdrop on your conversation.

Voice privacy will become active only during a call and will notify you with a beep.

Voice privacy

active will also

appear on the display.

If you turn this feature on and voice privacy becomes inactive for any reason, your phone displays

privacy not active

You may set this to On or (

Settings

and beeps.

Network services

by pressing

Off

Voice privacy

and

Voice

4 4 1

Volume

You can adjust the ringing volume and earpiece volume with your phone.

See “Earpiece volume” on page 34 and “Ringing volume” on page 58.

Warning and game tones

This is one of the settings in your phone’s Profiles

see page 53

(

). Warning and game tones include tones your phone makes for conditions such as errors, confirmations, power on, battery low, recharge battery and games. You can set warning and game tones on or off.

Turning warning and game tones on and off

Press

Your phone lists each Profile. Use

3 (

Profiles

)

to highlight the

one you want to set the warning and game tones for and press

Highlight

Customize

Warning and game tones

Scroll to On or

Options

and press OK. Press

, then press

and press OK

Off

Select

Welcome note

You can program a welcome note into your phone to display a message when you first turn it on (i.e. hello, your name, a reminder, etc.). The maximum length is 36 characters.

Press

Enter new message or edit an existing one, then

press

Press

Options

1 3 (

Save

Messages

Erase

Welcome note

and press

The welcome note displays each time your phone is switched on. Characters you enter are added to the left of the cursor. Press the cursor. Press

See “Entering letters and numbers” on page 35 for details.

to delete characters to the left of

Clear

or V to move the cursor right or left.

)

Write new

This feature allows you to write text messages with your phone.

See “Text messages and pages” on page 63 for more details.

6. Accessories

If you want to enhance your phone’s functionality, an extensive range of accessories is available for you. You can select any of these items to help accommodate your specific communication needs. For availability of these and other accessories, contact your service provider.

A few practical rules for accessory operation:

Keep all accessories out of reach of small children.

When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

Check regularly that any vehicle-installed accessories are mounted and are operating properly.

Installation of any complex car accessories must be made by qualified personnel only.

Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous.

See page 6 for important battery usage information.

Batteries

The following table shows battery options that are available for your phone, charging times with the Rapid Travel Charger (ACP-9U) and the Standard Travel Charger (ACP-7U), talk times, and standby times. Consult your service provider for more information.

Charging Times

Battery Option

ACP-7U

Charger

ACP-9U

Charger

BPS-1 Ultra Slim Li-Polymer Battery 600 mAh 2 hrs 30 min 1 hr 20 min

BLS-2N Extended Li-Ion Battery 900 mAh 4 hrs 2 hrs

BMS-2/BMS-2S Extended NiMH Battery 900 mAh

4 hrs 1 hr 30 min

BMS-2V Vibrating NiMH Battery 900 mAh 4 hrs 1 hr 30 min

BLS-4 Extended Li-Ion Battery 1500 mAh 5 hrs 3 hrs 30 min

Note: The times displayed above are approximate and will allow your battery to obtain approximately 80% of its capacity. At this time, the battery scroll bars on your phone’s display will stop scrolling. If you wish to obtain 100% battery capacity, please allow another two hours to “trickle” or “maintenance” charge.

Standby and Talk Times

Battery Option

BPS-1 Ultra Slim

Li-Polymer Battery

600 mAh

BLS-2N Extended

Li-Ion Battery

900 mAh

BMS-2/BMS-2S

Extended NiMH Battery

900 mAh

BMS-2V Vibrating

NiMH Battery

900 mAh

BLS-4 Extended

Li-Ion Battery

1500 mAh

Digital

Talk Ti me

1 hr 20 min to

2 hrs 10 min

2 hrs to

3 hrs15 min

2 hrs to

3 hrs15 min

2 hrs to

3 hrs15 min

3 hrs 10 min to

5 hrs 10 min

Analog

Talk Ti me

40 min to

1 hr 15 min

1 hr to

1 hr 50 min

1 hr to

1 hr 50 min

1 hr to

1 hr 50 min

1 hr 35 min to

2 hrs 50 min

Standby

Tim e

66 to 133 hrs (dig)

20 to 33 hrs (ana)

100 to 200 hrs (dig)

30 to 50 hrs (ana)

100 to 200 hrs (dig)

30 to 50 hrs (ana)

100 to 200 hrs (dig)

30 to 50 hrs (ana)

170 to 335 hrs (dig)

50 to 83 hrs (ana)

Note: The times shown are approximate. Battery operation times vary according to signal conditions, network parameters set by the service provider, and how you use your phone.

Chargers & other accessories

The following chargers and other accessories are available for your phone; please see your dealer for details. Also, refer to the accessories brochure that was included in your sales package for the entire line of Nokia Original Accessories.

Note: When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since o vercharging may shorten its life. If left unused, a fully charged battery will discharge itself over time.

Standard Travel Charger (ACP-7U)

This lightweight (187g) and durable AC charger can be used with all battery options.

To use the Standard Travel Charger, plug it into a wall outlet and connect the lead from the charger to the base of your phone. The charger can also be used together with the Compact Desktop Charging Stand (DCH-9).

Rapid Travel Charger (ACP-9U)

This lightweight (100g) AC charger can be used with all battery options. Calls can be made during charging, even with a fully discharged battery.

To use the Rapid Travel Charger (ACP-9U), plug it into a standard 120V AC wall outlet, and connect the lead from the charger to the base of your phone.

The charger can also be used together with the optional Compact Desktop Charging Stand (DCH-9). Approximate charging times for discharged batteries are shown at the beginning of this section.

Rapid Mobile Charger (LCH-8)

You can charge your phone’s battery from your vehicle battery by using the Rapid Mobile Charger (LCH-8). You can also use this lightweight charger with the Compact Desktop Charging Stand (DCH-9).

Calls are possible during charging. A green light indicates the charger is ready for charging (when not charging) or finished charging (if it has been charging). The battery charging times are the same as those for the Rapid Travel Charger (ACP-9U)

The input voltage range is from 11 to 32V DC, negative grounding. Avoid prolonged charging with the Rapid Mobile Charger (LCH-8) when the car engine is not running; this may cause the battery of your car to drain. Note also that in some cars the cigarette lighter plug is not provided with electricity if the ignition is not switched on.

Compact Desktop Charging Stand (DCH-9)

Used together with the Standard Travel Charger (ACP-7U) or the Rapid Travel Charger (ACP-9U), the Compact Desktop Charging Stand (DCH-9) is an economical choice when you need your phone close at hand, always ready for calls.

This charging stand allows you to charge your phone’s battery in the front charging slot, plus a spare battery in the rear charging slot.

When charging both batteries simultaneously, charging will begin in the front charging slot and then move to the rear slot once the front battery is 100% charged.

Please refer to the chart below for charging times in the rear charging slot.

DCH-9 Rear Slot Charging Times

Using ACP-7U Using ACP-9U

Battery Option

BPS-1Ultra Slim Li-Polymer Battery 600 mAh

When front

slot empty

4 hrs

30 min

When front

occupied

6 hrs

30 min

When front

slot empty

3 hrs

BLS-2N Extended Li-Ion 900 mAh

BMS-2/BMS-2S Extended NiMH 900 mAh

6 hrs

30 min

8 hrs

30 min

4 hrs

10 min

BMS-2V Vibrating NiMH 900 mAh

BLS-4 Ultra Extended

12 hrs

Li-Ion 1500 mAh

Note: Please note that if you are charging a battery in the rear charging slot while another battery occupies the front slot, please allow an additional two hours for a “maintenance” charge for the battery in the front slot. Please see page 74 for charging times for the front charging slot.

15 hrs 40 min

8 hrs

If you’re charging a battery in the front charging slot, charging is indicated by the scrolling battery bars on the right side of your phone’s display. When the scrolling stops, the battery is approximately 80% charged. A battery will be fully charged a couple of hours after the scrolling stops.

Also, you may notice a light indicator on the stand, which is used for charging a spare battery. A green light indicates a battery is at least 80% full; the red light indicates a battery is charging.

When front

occupied

4 hrs

30 min

5 hrs

25 min

10 hrs

30 min

7. Troubleshooting

What if charging fails?

Not charging

Make sure the battery is connected to an approved charging device and that the battery is at room temperature. Extreme temperatures, hot or cold, can affect your battery’s performance and prevent charging.

If charging still fails, disconnect the charger from your phone. Then reconnect the charger to retry. If you still experience charging problems, contact your dealer and, if necessary, bring your phone in to have it serviced. Also remember to bring in your battery and charger.

No service

If you’re outside the wireless service area, display on your phone. No calls can be made or received, however, emergency 911 calls may still be possible.

What if the call doesn’t go through?

Your phone can make and receive calls only when it’s switched on and in the wireless network’s service area.

No service

less service area. No calls can be made or received.

See “Get a good signal” on page 7.

Check call restrictions

you tried to call are restricted (

page 55 page 51

Note: Check with your service provider for information about when you need to dial a ‘1’ and/or an area code in addition to the number.

is displayed, charging is suspended.

phone and

your

No service

means that you’re probably outside the wire-

means calls to the phone number

see “Restrict calls” on

), or your phone is locked (

see “Phone lock” on

will

If you make a mistake dialing

Press press and hold

to delete the last character entered, or

Clear

to delete all characters entered.

Clear

8. Reference Information

Important Safety Information

Traffic Safety

Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.

Remember, road safety always comes first!

Operating Environment

Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).

Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 6 inches (20 cm.) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:

• Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on;

• Should not carry the phone in a breast pocket;

• Should use the ear opposite the pacemaker to minimize the potential for interference.

• If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.

Other Medical Devices

Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Veh icles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices so require.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.

Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lea d to the suspension or denial of telephone services to the offender, or legal action, or both.

Emergency Calls

IMPORTANT!

This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions which can not guarantee connection in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

Making an Emergency Call

If the phone is not on, switch it on

Press the

key to ready the phone for calls.

(Press it twice if there are still digits on the display.)

Key in the emergency number for your present

location (e.g. 911 or other official emergency number). Emergency numbers vary by location.

Press

When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.

Radio Frequency (RF) Signals

THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.46 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID LJPNSW-3AX. _____________________________________________________

*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Care and Maintenance

Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years. When using your phone, battery, charger, OR any accessory:

• Keep it and all its parts and accessories out of small children’s reach.

• Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.

• Do not use or store it in dusty, dirty areas as its moving parts can be damaged.

• Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store it in cold areas. When the phone warms up (to its normal operating temperature), moisture can form inside the phone, which may damage the phone's electronic circuit boards.

• Do not attempt to open it. Non-expert handling of the device may damage it.

• Do not drop, knock or shake it. Rough handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.

• Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.

• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices.

• If the phone, battery, charger, or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.

9. Technical Data

Wireless System Dual-Band TDMA and AMPS Weight 165g (5.8 oz) with BMS-2/

Size 140 cc Frequency Range Lowband 824.04 - 848.97 MHz (TX)

Highband 1850.04 - 1909.92 MHz (TX)

Transmitter Output Power

Battery Voltage 3.6 V nominal Charging current 850 mAh max. Operating Temperature -20°C to + 40°C

Number of Channels 832 lowband

Number of NAMs 3 Memory Locations 199 Memory Capacity Alpha: 16 digits per location

Nokia, Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates.

The information contained in this phone was written for dualmode TDMA and AMPS phones.

The right to make changes and improvements to any of the products described in this guide without prior notice is reserved.

These commodities are authorized by the U.S. Government for export only to Canada, Mexico, or the United States. They may not be resold, diverted, transferred, or otherwise disposed of in any other country, either in their original form or after being incorporated through an intermediate process into other enditems, without the written approval of the U.S. Department of State.

Part No. 9352384 Issue No. 4 Phase 3 Printed in Canada 01/01

BMS-2S 900 mAh NiMH Battery

869.04 - 893.97 MHz (RX)

1930.08 - 1989.96 MHz (RX)

Up to 600mW nominal

(-4°F to + 104°F)

1997 highband

Numeric: 32 digits per location

10. NOKIA One-Year Limited Warranty

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:

1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product.

2. The limited warranty extends to the original purchaser of the Product (“Consumer”) and is not assignable or transferable to any subsequent purchaser/end-user.

3. The limited warranty extends only to Consumers who purchase the Product in the United States.

4. During the limited warranty period, Nokia will repair, or replace, at Nokia's option, any defective parts, or any parts that will not properly operate for their intended use with new or factory rebuilt replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, includ ing framing, and any non-operat ive parts. Nokia's limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, determined by the price paid by the Consumer for the Product less a reasonable amount for usage. Nokia shall not be liable for any other losses or damages. These remedies are the Consumer’s exclusive remedies for breach of warranty.

5. Upon request from Nokia , the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.

6. The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.

7. The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:

a) The Product has been subject to abnormal use, abnormal conditions, improper st orage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Nokia, including damage caused by shipping.

b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, or damage caused by the connection to other products not recommended for interconnection by Nokia.

c) Nokia was not advised by the Consumer in writing of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.

d) The Product serial number plate or the accessory data code has been removed, defaced or altered.

e) The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna.

8. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.

b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to:

Nokia Inc. Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL. 32901

c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.

e) Nokia will repair or authorize the repair of the Product under the limited warranty within 30 days after receipt of the Product by Nokia or an Nokia authorized service center. If Nokia cannot perform repair covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage.

f) If the Product is returned to Nokia during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned to Nokia after the expiration of the limited warranty period, Nokia's normal service policies shall apply and the Consumer will be responsible for all shipping charges.

9. The Product consists of newly assembled equipment that may contain used components that have been reprocessed to allow machine compliance with Product performance and reliability specifications.

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.

11. Some states do not allow limitation of how long an implied warranty lasts, so the above one-year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of inc idental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state.

12. Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement.

13. This is the entire warranty between Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, and all communications relating to the Product, and no representation, promise or condition not contained herein shall modify these terms.

14. This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price of the Product.

15. Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following delivery of the Product.

16. Questions concerning this limited warranty may be directed to:

Nokia Customer Care Center Nokia Inc. 7725 Woodland Center Boulevard, Suite #150 Tampa, FL 33614 Telephone: 1-888-NOKIA2U (1-888-665-4228) Facsimile: (813) 249-9619 TTY Users: 1-800-24NOKIA (1-800-246-6542)

17. The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging.

11. Index

ABC mode Access codes Accessories

batteries

chargers Alarm clock Answering a call Antenna Automatic answer Automatic redial

73 73 75

Batteries

attaching available charging charging times discharging removing standby times talk times

Calculator

Calendar Call forwarding

Call log

Call restrictions

currency converter

cancelling options

clear call lists dialed calls missed calls options in call lists received calls list

calls

see

restrict

17,

Call timers

clearing current call timer life timer

Call waiting

activating answering an incoming

call

Caller groups

graphics renaming ringing tones

Caller ID

send own number

Calling card

making calls with storing in phone

Calls

answering answering automatically answering with call

waiting conference call ending forwarding initiating a second making muting silencing incoming swapping unmuting

Care and maintenance Chargers Charging times Clear call lists Clock

displaying/hiding setting time format

Conference call

Currency converter

Cursor Customer care

Dialed calls list Dice game Directory

see

phone book

Earpiece volume Editing names/numbers Emergency calls Emergency key 9 feature Entering letters and

numbers

Erasing names/numbers

34,

Factory settings, restoring Forwarding calls

forwarding

see

call

Game tones Games

Dice Logic Memory Snake

Help text

39, 64

Inbox In-call menu

Keyguard Keypad tones Keys

locking power key scroll key

soft keys

Language

Last number redial Letter case

Letters, entering Life timer Lights

and Keyguard in Car profile

Listen to voice messages

Lock code Locking the keypad

Keyguard Locking your phone Logic game

Making a call Memory game Memory status Menu

help shortcuts, summary

shortcuts, using Message alert tone Message received Message settings Messages Microphone

muting and unmuting Missed calls list

see

NAM selection Names

editing erasing finding

storing Network feature setting Network services Numbers

editing

entering

erasing

finding

storing

On/off One-touch dialing

Outbox

Paging Phone book

available memory

editing entries

erasing entries

finding entries

one-touch dialing

scrolling view

storing entries Phone lock

unlocked phone number

69 Power key private systems

selection Profiles Public systems

selection

see

system

see

system

Received calls list Redial

automatic last number

Residential systems

system selection

Restore factory settings Restrict calls Ringing options Ringing tones Ringing volume Roaming

Safety information Scroll bar Scroll key Scrolling view Security code Send own number Shortcuts Signal strength Snake game Soft keys Special characters Speed dialing

touch dialing Standby times Start screen Storing a calling card Storing names/numbers System System selection

Ta lk ti m e s Technical data

see

one-

see

Text messages

forwarding inbox message settings reading receiving replying to sending storage writing

To ne s

keypad message alert tone ringing options ringing tones ringing volume warning and game

Touch tones

length 69 manual

Unlocked phone number Unlocking your phone

Keyguard feature phone lock feature

Unmuting the microphone

Vibrating alert Voice mailbox number,

storing Voice messages Voi ce priva cy Vol ume

earpiece keypad tones ringing

Warning and game tones

Warranty Welcome note Write new

Nokia 6160I User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Keys

Indicators and Icons

Table of Contents

1. Safety At A Glance

2. Getting Connected

Attaching your battery

Removing the battery

Charging your new battery

When is a good time to charge?

Important Battery Information

3. The Basics

Switching the phone on and off

Get a good signal

Making a call

Ending a call

Answering a call

Want to stop your phone from ringing without answering the call?

Keyguard

4. Using Your Phone

The display

What is the ‘start screen’?

Scrolling through the main menu

Help text

Summary of menu items

5. Features A to Z

Access codes

Alarm clock

All calls timer

Automatic answer

Automatic redial

Calculator

Storing exchange rate

Converting currency

Calendar

Call forwarding

Call log

Call restrictions

Call settings

Call timers

Call waiting

Caller groups

Caller ID

Calling card

Making calling card calls

Clear call lists

Clear timers

Clock

Setting the clock

Selecting time format

Displaying or hiding the clock

Conference call

Current call timer

Customer care contact number

Dialed calls

Earpiece volume

Emergency calls

Emergency key 9

Entering letters and numbers

ABC mode

Changing letter case

123 mode

Games

In-call menu

Keypad tones

Language

Last call timer

Last number redial

Life timer

Lights

Listen to voice messages

Lock code

Changing your lock code

Manual touch tones

Memory status

Messages

Message alert tone