Nokia 550 TRANSCEIVER 10l

Page 1
PAMS Technical Documentation
Appendix 5 – Transceiver THF–10L
Chapter 2
TRANSCEIVER
Original 11/97
Page 2
THF–10L
PAMS
CONTENTS
Introduction 2 – 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional Description 2 – 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Block Diagram 2 – 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modules 2 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Specifications 2 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transceiver General Specifications 2 – 4. . . . . . . . . . . . . . . . . . .
Transmitter Branch 2 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiver Branch 2 – 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RX Synthesizer 2 – 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TX Synthesizer 2 – 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exploded View of THF–10L 2 – 7. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly Parts of THF–10L 2 – 8. . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts List of TA1L SMD Variation Module 2 – 9. . . . . . . . . . . . . . . .
Technical Documentation
Page 2 – 2
Original 11/97
Page 3
PAMS
THF–10L
Technical Documentation

Introduction

Functional Description
The transceiver electronics consist of UI module PCB and RF/system PCB. UI module is connected to system module with a connector. System and rf submodules are interconnected with PCB wiring. Unit can be connected to accessories with a bottom system connector, which includes charging and accessory control.
RF block is designed for a hand portable phone, which operates in NMT450 systems. Purpose of the RF module is to receive and demodulate radio fre­quency signal from the base station and to transmit a modulated RF signal to the base station.

Modules

Transceiver THF–10L 0501228
system module TA1L 0201045
software module 0240509
display module GN4 0200964
mechanics MTHF10K 0261449
Swap transceiver 05015

RF Characteristics

Characteristic Value / Comments
RX Frequency range 411.675...415.850 MHz TX Frequency range 421.675...425.850 MHz Channel spacing 25 kHz Number of channels 168 (1...168) TX Frequency deviation ≤± 4.7 kHz (± 5 kHz with 4 kHz supervisory sig-
nal)
FFSK deviation
1200 Hz (”1” frequency) ± 2800 Hz
1800 Hz (”0” frequency) ± 4200 Hz
Original 11/97
Page 2 – 3
Page 4
THF–10L
PAMS
Exploded View of THF–10L
Technical Documentation
Page 2 – 4
Original 11/97
Page 5
PAMS
THF–10L
Technical Documentation
Assembly Parts of THF–10L
ITEM Q’TY CODE DESCRIPTION VALUE, TYPE
1 9457939 Window DMC00802 2 9457960 A–cover DMC00789 3 9790266 Power keymat DMC01040 4 9790267 Keymat DMC00788 5 5140037 Microphone 6 5140018 Buzzer 7 5140580 Speaker 8 0200964 UIF Module GN4 9 9540021 Shield DMD02660 M1 0200960 System/RF Module TA1 11 9510373 Antenna Clip DMD02860 12 4350109 Power Amplifier 13 2 6190001 Screw M2x3.8 14 9790163 Volume keypad DMD000097 15 9457907 B–Cover DMC01027 16 0660156 Antenna – retractable 411–443 MHz 17 6 6190031 Screw M2x8 18 9380115 Type label 4D 21663 C
Original 11/97
Page 2 – 5
Page 6
THF–10L
PAMS
Technical Documentation

Parts list of TA1L SMD VARIATION MODULE

(EDMS Issue 1.6) Code: 0201107
ITEM CODE DESCRIPTION VALUE TYPE
R420 1430784 Chip resistor 15 k 5 % 0.063 W 0402 G420 4350043 Vco 411–419mhz 4.5v/12ma tx nmt G520 4350041 Vco 376–384mhz 4.5v/10ma rx nmt Z320 4511007 Saw filter 423.8+–2.1 M 5.2x5.2 Z640 4512037 Dupl 411.6–415.8/421.6–425.8mhz N620 4350109 IC, pow.amp. 6 V 3 W
Page 2 – 6
Original 11/97
Page 7
PAMS
THF–10L
Technical Documentation
[This page intentionally left blank]
Original 11/97
Page 2 – 7
Loading...