Hereby, NOKIA CORPORATION declares that this RM-304 product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/
Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be
trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without
the prior written permission of Nokia is prohibited.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in
connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer
engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a
licensed video provider. No license is granted or shall be implied for any other use. Additional information, including
that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://
www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to
any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS
LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT
DAMAGES HOWSOEVER CAUSED.
THE CONTEN TS OF T HIS DOC UMENT A RE PRO VIDED " AS IS". EXCEP T AS REQ UIRED BY APPL ICABL E LAW, N O WARRA NTIES OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS
DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR
NOTICE.
The availability of particular products and applications and services for these products may vary by region. Please
check with your Nokia dealer for details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US
and other countries. Diversion contrary to law is prohibited.
The third-party applications provided with your device may have been created and may be owned by persons or
entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to
the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of
the applications, or the information in the applications or these materials. Nokia does not provide any warranty for
the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE
THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPR ESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE
APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving
equipment).The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC
rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this
equipment.
9206393/Issue 1
Contents
For your safety ............................6
Predictive text input...............................19
1. General information................7
About your device......................................7
The wireless device described in this guide is approved for use on the GSM 850, 1800,
and 1900 networks. Contact your service provider for more information about networks.
The type of your device is indicated on a label in the battery compartment.
When using the features in this device, obey all laws and respect local customs, privacy
and legitimate rights of others, including copyrights.
Copyright protections may prevent some images, music (including ringing tones), and
other content from being copied, modified, transferred, or forwarded.
Remember to make back-up copies or keep a written record of all important information
stored in your device.
When connecting to any other device, read its user guide for detailed safety instructions.
Do not connect incompatible products.
Warning: To use any features in this device, other than the alarm clock, the
device must be switched on. Do not switch the device on when wireless device use may
cause interference or danger.
Network services
To use the phone you must have service from a wireless service provider. Many of the
features require special network features. These features are not available on all
networks; other networks may require that you make specific arrangements with your
service provider before you can use the network services. Your service provider can give
you instructions and explain what charges will apply. Some networks may have
limitations that affect how you can use network services. For instance, some networks
may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, these features will not appear on your device menu. Your
device may also have a special configuration such as changes in menu names, menu
order, and icons. Contact your service provider for more information.
Enhancements
Practical rules about accessories and enhancements
● Keep all accessories and enhancements out of the reach of small children.
● When you disconnect the power cord of any accessory or enhancement, grasp and
pull the plug, not the cord.
● Check regularly that enhancements installed in a vehicle are mounted and are
operating properly.
● Installation of any complex car enhancements must be made by qualified personnel
only.
Access codes
To set how your phone uses the access codes and security settings, select Menu >
Settings > Security.
● The PIN (UPIN) code, supplied with the SIM (USIM) card, helps to protect the card
against unauthorized use.
● The PIN2 (UPIN2) code, supplied with some SIM (USIM) cards, is required to access
certain services.
● PUK (UPUK) and PUK2 (UPUK2) codes may be supplied with the SIM (USIM) card. If you
enter the PIN code incorrectly three times in succession, you are asked for the PUK
code. If the codes are not supplied, contact your service provider.
● The security code helps to protect your phone against unauthorized use. You can
create and change a code, and set the phone to request the code.
● The restriction password is required when using the Call restrictions to restrict
incoming calls to and outgoing calls from your phone (network service).
● To view or change the security module settings, select Menu > Settings >
Security > Security module sett..
Configuration setting service
To use some of the network services, such as mobile internet services, MMS, Nokia Xpress
audio messaging, or remote internet server synchronization, your phone needs the
correct configuration settings. For more information on availability, contact your service
provider or the nearest authorized Nokia dealer, or visit the support area on the Nokia
website.
When you have received the settings as a configuration message and the settings are
not automatically saved and activated, Configuration settings received is displayed.
To save the settings, select Show > Save. If required, enter the PIN code supplied by
the service provider.
See "Nokia support," p. 9.
Download content
You may be able to download new content (for example, themes) to your phone
(network service).
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
For the availability of different services and pricing, contact your service provider.
Nokia may produce software updates that may offer new features, enhanced functions,
or improved performance. To update the phone software, you need the Nokia Software
Updater application and a compatible PC with a recent Microsoft Windows operating
system, broadband internet access, and a compatible data cable to connect your phone
to the PC.
To get more information and to download the Nokia Software Updater application, visit
www.nokia.com/softwareupdate or your local Nokia website.
If software updates over the air are supported by your network, you may also be able
to request updates through the phone.
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
See "Software updates over the air," p. 30.
Nokia support
Check www.nokia.com/support or your local Nokia website for the latest version of this
guide, additional information, downloads, and services related to your Nokia product.
Configuration settings service
Download free configuration settings such as MMS, GPRS, e-mail, and other services for
your phone model at www.nokia.com/support.
Nokia PC Suite
You may find PC Suite and related information on the Nokia website at www.nokia.com/
support.
Customer service
If you need to contact customer service, check the list of local Nokia Care
contact centers at www.nokia.com/customerservice.
Maintenance
For maintenance services, check your nearest Nokia service center at www.nokia.com/
repair.
Digital rights management
Content owners may use different types of digital rights management technologies
(DRM) to protect their intellectual property including copyrights. This device uses various
types of DRM software to access DRM protected content. With this device you may be
able to access content protected with WMDRM 10, OMA DRM 1.0, OMA DRM 1.0 forward
lock, and OMA DRM 2.0. If certain DRM software fails to protect the content, content
owners may ask that such DRM software's ability to access new DRM protected content
be revoked. Revocation may also prevent renewal of such DRM protected content already
in your device. Revocation of such DRM software does not affect the use of content
protected with other types of DRM or the use of non-DRM-protected content.
DRM protected content comes with an associated activation key that defines your rights
to use the content.
To back up OMA DRM protected content, use the backup feature of Nokia PC Suite.
If your device has WMDRM protected content, both the activation keys and the content
will be lost if the device memory is formatted. You may also lose the activation keys and
the content in case the files on your device get corrupted. Losing the activation keys or
the content may limit your ability to use the same content on your device again. For
more information, contact your service provider.
2. Get started
Install SIM card and battery
Always switch the device off and disconnect the charger before removing the battery.
For availability and information on using SIM card services, contact your SIM card vendor.
This may be the service provider or other vendor.
This phone is intended for use with a BL-4CT battery. Always use original Nokia batteries.
See "Nokia battery authentication guidelines," p. 45.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
Important: To release the SIM card lock, always remove the battery before you
3. Insert the battery (5) and
replace the back cover (6, 7).
Insert a microSD card
Use only compatible microSD cards approved by Nokia for use with this device. Nokia
uses approved industry standards for memory cards, but some brands may not be fully
compatible with this device. Incompatible cards may damage the card and the device
and corrupt data stored on the card.
1. Remove the back cover of the phone.
2. Insert the card into the microSD card slot with the
contact surface facing down, and press it until it
locks into place.
Remove the microSD card
Important: Do not remove the memory card in the middle of an operation when
the card is being accessed. Removing the card in the middle of an operation may damage
the memory card as well as the device, and data stored on the card may be corrupted.
You can remove or replace the microSD card during phone operation without switching
the device off.
1. Make sure that no application is currently accessing the microSD memory card.
2. Remove the back cover of the device.
3. Press the microSD card slightly in to release the lock and remove it.
Charge the battery
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from the AC-3 and AC-4 charger.
Warning: Use only batteries, chargers, and enhancements approved by Nokia
for use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the charger connector
of your phone.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the display
or before any calls can be made.
The charging time depends on the charger used. Charging a
BL-4CT battery with the AC-3 charger takes approximately 2
hours 30 minutes while the phone is in the standby mode.
Antenna
Note: Your device may have internal and external antennas. As with any
radio transmitting device, avoid touching the antenna unnecessarily when the
antenna is in use. Contact with such an antenna affects the communication
quality, may cause the device to operate at a higher power level than otherwise
needed and may reduce the battery life.
The picture shows the antenna area marked in grey.
Headset
Warning: Listen to music at a moderate level. Continuous exposure to high
volume may damage your hearing.
When connecting any external device or any headset, other than those approved by
Nokia for use with this device, to the Nokia AV Connector, pay special attention to volume
levels.
Warning: When you use the headset, your ability to hear outside sounds may
be affected. Do not use the headset where it can endanger your safety.
Do not connect products that create an output signal as this may cause damage to the
device. Do not connect any voltage source to the Nokia AV Connector.
To switch the phone on or off, press and hold the power key.
If the phone prompts for a PIN or a UPIN code, enter the code (displayed as ****).
The phone may prompt you to set the time and date. Enter the local time, select the
time zone of your location in terms of the time difference with respect to Greenwich
Mean Time (GMT), and enter the date.
When you switch on your phone for the first time, you may be prompted to get the
configuration settings from your service provider (network service). For more
information, refer to Connect to support. See
"Configuration setting service," p. 8.
See "Date and time," p. 26.
"Configuration," p. 31, and
Standby mode
When the phone is ready for use, and you have not entered any characters, the phone
is in the standby mode.
Display
1
Signal strength of the cellular network
2
Battery charge status
3 Indicators
4 Name of the network or the operator logo
5 Clock
6 Display
7 Function of the left selection key
8 Function of the Navi key
9 Function of the right selection key
You may change the function of the left and right selection key. See "Left and right
selection key," p. 26.
Power saving
Your phone has a Power saver and a Sleep mode feature in order to save battery power
in the standby mode when no keys are pressed. These features may be activated.
The active standby mode displays a list of selected phone features and information that
you can directly access.
To switch active standby on or off, select Menu > Settings > Display > Activestandby > Active standby mode.
In the standby mode, scroll up or down to navigate in the list, and choose Select or
View. The arrows indicate that further information is available. To stop navigation,
select Exit.
To organize and change the active standby mode, select Options.
Shortcuts in the standby mode
To access the list of dialed numbers, press the call key once. Scroll to the number or
name, and press the call key to call the number.
To open the web browser, press and hold 0.
To call your voice mailbox, press and hold 1.
Use keys as a shortcut.
See "Dialing shortcuts," p. 17.
Indicators
unread messages
unsent, canceled, or failed messages
missed call
The keypad is locked.
The phone does not ring for an incoming call or text message.
The alarm clock is activated.
/ The phone is registered to the GPRS or EGPRS network.
/ A GPRS or EGPRS connection is established.
/ The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
If you have two phone lines, the second phone line is selected.
All incoming calls are forwarded to another number.
Calls are limited to a closed user group.
The timed profile is selected.
Use the flight mode in radio sensitive environments—on board aircraft or in hospitals
—to deactivate all radio frequency functions. You still have access to offline games,
calendar, and phone numbers. When the flight mode is active,
To activate or set up the flight mode, select Menu > Settings > Profiles > Flight >
Activate or Customize.
To deactivate the flight mode, select any other profile.
Emergency call in flight mode
Enter the emergency number, press the call key, and select Yes when Exit flight
profile? is displayed.
Warning: With the flight profile you cannot make or receive any calls, including
emergency calls, or use other features that require network coverage. To make calls,
you must first activate the phone function by changing profiles. If the device has been
locked, enter the lock code. If you need to make an emergency call while the device is
locked and in the flight profile, you may be also able to enter an official emergency
number programmed in your device in the lock code field and select 'Call'. The device
will confirm that you are about to exit flight profile to start an emergency call.
is shown.
Keypad lock (keyguard)
To prevent accidental keypresses, select Menu, and press * within 3.5 seconds to lock
the keypad.
To unlock the keypad, select Unlock, and press * within 1.5 seconds. If Securitykeyguard is set to on, enter the security code if requested.
To answer a call when the keypad is locked, press the call key. When you end or reject
the call, the keypad automatically locks.
Further features are Automatic keyguard and Security keyguard.
"Phone," p. 29.
When the keyguard is on, calls may be possible to the official emergency number
programmed into your device.
See
Functions without a SIM card
Some functions of your phone may be used without installing a SIM card, such as music
player, radio, games, and data transfer with a compatible PC or another compatible
device. Some functions appear dimmed in the menus and cannot be used.
● Enter the phone number, including the area code, and press the call key.
For international calls, press * twice for the international prefix (the + character
replaces the international access code), enter the country code, the area code without
the leading 0, if necessary, and the phone number.
● To access the list of dialed numbers, press the call key once in the standby mode.
Select a number or name, and press the call key.
● Search for a name or phone number that you saved in Contacts.
contacts," p. 23.
To adjust the volume in a call, press the volume key up or down.
Answer or end a call
To answer an incoming call, press the call key. To end the call, press the end key.
To reject an incoming call, press the end key. To mute the ringing tone, select Silence.
Dialing shortcuts
First assign a phone number to one of the number keys, 2 to 9. See "Assign dialing
shortcuts," p. 24.
Use a dialing shortcut to make a call in one of the following ways:
● Press a number key, then the call key.
● If Menu > Settings > Call > 1-touch dialing > On is selected, press and hold a
number key.
See "Manage
Voice dialing
Make a phone call by saying the name that is saved in the contact list of the phone.
As voice commands are language-dependent, you must select Menu > Settings >
Phone > Language settings > Recognition lang. and your language before using
voice dialing.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or the volume down key.
2. Speak the name of the contact you want to dial. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of the first match
on the list. If it is not the correct command, scroll to another entry.
Options during a call
Many of the options that you can use during a call are network services. For availability,
contact your service provider.
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice
clarity, Loudspeaker or Handset.
Network options are Answer or Decline, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
● Touch tones — to send tone strings
● Swap — to switch between the active call and the call on hold
● Transfer calls — to connect a call on hold to an active call and disconnect yourself
● Conference — to make a conference call
● Private call — to have a private discussion in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
4. Write text
Text modes
To enter text (for example, when writing messages) you can use traditional or predictive
text input.
When you write text, press and hold Options to toggle between traditional text input,
indicated by
supported by predictive text input.
The character cases are indicated by
press #. To change from the letter to number mode, indicated by
#, and select Number mode. To change from the number to the letter mode, press and
hold #.
To set the writing language, select Options > Writing language.
, and predictive text input, indicated by . Not all languages are
, , and . To change the character case,
, press and hold
Traditional text input
Press a number key, 2 to 9, repeatedly until the desired character appears. The available
characters depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait until the
cursor appears and enter the letter.
To access the most common punctuation marks and special characters, repeatedly press
the number key 1 or press * to select a special character.
Predictive text input
Predictive text input is based on a built-in dictionary to which you can also add new
words.
1. Start writing a word, using the keys 2 to 9. Press each key only once for one letter.
2. To confirm a word by adding a space, press 0.
● If the word is not correct, press * repeatedly, and select the word from the list.
● If the ? character is displayed after the word, the word you intended to write is
not in the dictionary. To add the word to the dictionary, select Spell. Enter the
word using traditional text input, and select Save.
● To write compound words, enter the first part of the word, and press the scroll
key right to confirm it. Write the last part of the word, and confirm the word.
3. Start writing the next word.
5. Navigate the menus
The phone offers you an extensive range of functions that are grouped into menus.
1. To access the menu, select Menu.
2. Scroll through the menu, and select an option (for example, Settings).
3. If the selected menu contains further submenus, select one (for example, Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back.
To exit the menu, select Exit.
To change the menu view, select Options > Main menu view > List, Grid, Grid withlabels, or Tab.
To rearrange the menu, scroll to the menu to be moved, and select Options >Organize > Move. Scroll to where you want to move the menu, and select OK. To save
the change, select Done > Yes.
6. Messaging
You can read, write, send and save text and multimedia messages and audio
messages. The messaging services can only be used if they are supported by your
network or service provider.
You can create a message and optionally attach, for example, a picture. Your phone
automatically changes a text message to a multimedia message when a file is attached.
Text messages
Your device supports the sending of text messages beyond the limit for a single
message. Longer messages are sent as two or more messages. Your service provider
may charge accordingly. Characters with accents or other marks, and characters from
some language options, take up more space, and limit the number of characters that
can be sent in a single message.
An indicator at the top of the display shows the total number of characters left and the
number of messages needed for sending.
Before you can send any text or SMS e-mail messages, you must save your message
center number. Select Menu > Messaging > Message settings > Textmessages > Message centers > Add center, enter a name, and the number from
the service provider.
Multimedia messages
A multimedia message can contain text, pictures, sound clips, and video clips.
Important: Exercise caution when opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
To check availability and to subscribe to the multimedia messaging service (MMS),
contact your service provider. You also may download the configuration settings.
"Nokia support," p. 9.
Create a text or multimedia message
1. Select Menu > Messaging > Create message > Message.
2. To add recipients, scroll to the To: field, and enter the recipient’s number, or select
Add to select r ecipients from the available options. Select Options to add recipients
and subjects and to set sending options.
3. Scroll to the Text: field, and enter the message text.
4. To attach content to the message, scroll to the attachment bar at the bottom of the
display and select the desired type of content.
5. To send the message, press Send.
The message type is indicated at the top of the display and changes automatically
depending on the content of the message.
Service providers may charge differently depending on the message type. Check with
your service provider for details.
Important: Exercise caution when opening messages. E-mail messages or
multimedia message objects may contain malicious software or otherwise be harmful
to your device or PC.
Your phone issues a notification when a message is received. Press Show to display the
message. If more than one message was received select a message from the inbox and
press Open. Use the scroll key to view all parts of the message.
Select Reply to create an answer message.
Send messages
Message sending
To send the message, select Send. The phone saves the message in the Outbox folder,
and the sending starts.
Note: The message sent icon or text on your device screen does not indicate that
the message is received at the intended destination.
If message sending is interrupted, the phone tries to resend the message a few times.
If these attempts fail, the message remains in the Outbox folder. To cancel the sending
of the messages in the Outbox folder, select Options > Cancel sending.
To save the sent messages in the Sent items folder, select Menu > Messaging >
Message settings > General settings > Save sent messages.
Organize your messages
The phone saves received messages in the Inbox fo lder. Organize your messages in the
saved items folder.
To add, rename, or delete a folder, select Menu > Messaging > Saved items >
Options.
Nokia Xpress audio messages
Create and send an audio message using MMS in a convenient way.
1. Select Menu > Messaging > Create message > Audio message. The voice
recorder opens.
2. Record your message.
3. Enter one or more phone numbers in the To: field, or select Add to retrieve a number.
4. To send the message, select Send.
See "Voice recorder," p. 37.
Instant messaging
With instant messaging (IM, network service) you can send short text messages to online
users. You must subscribe to a service and register with the IM service you want to use.
Check the availability of these service, pricing, and instructions with your service
provider. The menus may vary depending on your IM provider.
To connect to the service, select Menu > I M and follow the instructions on the display.
Info messages, SIM messages and service commands
Info messages
You can receive messages on various topics from your service provider (network
service). For more information, contact your service provider.
Select Menu > Messaging > Info messages and from the available options.
Service commands
Service commands allow you to write and send service requests (USSD commands) to
your service provider, such as activation commands for network services.
To write and send the service request, select Menu > Messaging > Serv.
commands. For details, contact your service provider.
SIM messages
SIM messages are specific text messages that are saved to your SIM card. You can copy
or move those messages from the SIM to the phone memory, but not vice versa.
To read SIM messages, select Menu > Messaging > Options > SIM messages.
Voice messages
The voice mailbox is a network service to which you may need to subscribe. For more
information, contact your service provider.
To call your voice mailbox, press and hold 1.
To edit your voice mailbox number, select Menu > Messaging > Voice messages >
Voice mailbox no..
Message settings
Select Menu > Messaging > Message settings to set up your messaging features.
● General settings — to set your phone to save sent messages, to allow overwriting
of older messages if the message memory is full, and to set up other preferences
related to messages
● Text messages — to allow delivery reports, to set up message centers for SMS and
SMS e-mail, to select the type of character support, and to set up other preferences
related to text messages
● Multimedia messages — to allow delivery reports, to set up the appearance of
multimedia messages, to allow the reception of multimedia messages and adverts,
and to set up other preferences related to multimedia messages
You can save names, phone numbers as contacts in the phone memory and on the SIM
card memory and search and recall them to make a phone call or to create a message.
Manage contacts
Select the memory for contacts
The phone memory can save contacts with additional details, such as various phone
numbers and text items. You can also save an image, a tone, or a video clip for a limited
number of contacts.
The SIM card memory can save names with one phone number attached to them. The
contacts saved in the SIM card memory are indicated by
1. Select Menu > Contacts > Settings > Memory in use to select the SIM card, the
phone memory, or both for your contacts.
2. Select Phone and SIM to recall contacts from both memories. When you save
contacts, they will be saved in the phone memory.
Save names and numbers
To save a name and phone number, select Menu > Contacts > Names > Options >
Add new contact.
Add and edit details
The first number you save is automatically set as the default number and is indicated
with a frame around the number type indicator (for example,
name from contacts (for example, to make a call), the default number is used unless
you select another number.
Search for the contact to add a detail, and select Details > Options > Add detail and
from the available options.
Search for a contact
Select Menu > Contacts > Names and scroll through the list of contacts, or enter the
first characters of the name to search.
Copy or move a contact between SIM card and phone memory
1. Select Menu > Contacts > Names.
2. Select the contact to copy or move and Options > Copy contact or Move
contact.
Copy or move several contacts between SIM card and phone memory
1. Select the first contact to copy or move and Options > Mark.
2. Mark the other contacts, and select Options > Copy marked or Move marked.
Copy or move all contacts between SIM card and phone memory
Select Menu > Contacts > Copy contacts or Move contacts.
Delete contacts
Search for the desired contact, and select Options > Delete contact.
To delete all the contacts and the details attached to them from the phone or SIM card
memory, select Menu > Contacts > Del. all contacts > From phone memory or
From SIM card.
To delete a number, text item, or an image attached to the contact, search for the
contact, and select Details. Scroll to the desired detail, and select Options > Delete
and from the available options.
Create a contact group
Arrange contacts into caller groups with different ringing tones and group images.
1. Select Menu > Contacts > Groups.
2. Select Add or Options > Add new group to create a new group.
3. Enter the group name, optionally select an image and a ringing tone and select
Save.
4. Select the group and View > Add to add contacts to the group.
Business cards
You can send and receive a person’s contact information from a compatible device that
supports the vCard standard.
To send a business card, search for the contact, and select Details > Options > Sendbusiness card.
When you receive a business card, select Show > Save to save the business card in the
phone memory.
Assign dialing shortcuts
Assign phone numbers to the number keys 2–9 as a shortcut.
1. Select Menu > Contacts > 1-touch dialing, and scroll to a number key.
2. Select Assign, or if a number has already been assigned to the key, select Options >Change.
3. Enter a number or search for a contact.
8. Call log
To view the information on your calls, select Menu > Log. Available options may include
the following:
● Call log — to view your recently missed and received calls and dialed numbers
chronologically
● Missed calls, Received calls, or Dialed numbers — for information about your
recent calls
● Msg. recipients — to view the contacts to whom you most recently sent messages
● Call timers, Data counter, or Pack. data timer — to view the general information
on your recent communications
● Message log, or Sync log — to view the number of sent and received messages or
synchronizations
Note: The actual invoice for calls and services from your service provider may
vary, depending on network features, rounding off for billing, taxes, and so forth.
Note: Some timers, including the life timer, may be reset during service or
software upgrades.
9. Settings
Profiles
Your phone has various setting groups called profiles, which you can customize with
ringing tones for different events and environments.
Select Menu > Settings > Profiles, the desired profile, and from the following
options:
● Activate — to activate the selected profile
● Customize — to change the profile settings
● Timed — to set the profile to be active until an end time. When the time set for the
profile expires, the previous profile that was not timed becomes active.
Themes
A theme contains elements for personalizing your phone.
Select Menu > Settings > Themes and from the following options:
● Select theme — Open the Themes folder, and select a theme.
● Theme downloads — Open a list of links to download more themes.
Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones. You can find the same settings in the Profiles menu.
If you select the highest ringing tone level, the ringing tone reaches its highest level
Select Menu > Settings > Display and from the available options:
● Wallpaper — to add a background image for the standby mode
● Active standby — to activate, organize, and personalize the active standby mode
● Standby font color — to select the font color for the standby mode
● Navigation key icons — to display the icons of the scroll key shortcuts in the
standby mode when active standby is off
● Notification details — to display details in missed call and message notifications
● Screen saver — to create and set a screen saver
● Power saver — to dim the display automatically and to display a clock when the
phone is not used for a certain time
● Sleep mode — to switch off the display automatically when the phone is not used
for a certain time
● Font size — to set the font size for messaging, contacts, and web pages
● Operator logo — to display the operator logo
● Cell info display — to display the cell identity, if available from the network
Date and time
To change the clock type, time, time zone, and date settings, select Menu > Settings >
Date and time.
When traveling to a different time zone, select Menu > Settings > Date and time >
Date & time settings > Time zone: and scroll left or right to select the time zone of
your location. The time and date are set according to the time zone and enable your
phone to display the correct sending time of received text or multimedia messages.
For example, GMT -5 denotes the time zone for New York (USA), 5 hours west of
Greenwich/London (UK).
My shortcuts
With personal shortcuts you get quick access to often used functions of the phone.
Left and right selection key
To select a function from the list, select Menu > Settings > My shortcuts > Left
selection key or Right selection key.
In the standby mode, if the left selection key is Go to, to activate a function, select Go
to > Options and from the following options:
● Select options — to add or remove a function
● Organize — to rearrange the functions
Other shortcuts
Select Menu > Settings > My shortcuts and from the following options:
● Navigation key — to assign other functions from a predefined list to the navigation
key (scroll key).
● Active standby key — to select the movement of the navigation key to activate the
active standby mode
Synchronization and backup
Select Menu > Settings > Sync and backup and from following options.
● Phone switch — Synchronize or copy selected data between your phone and
another phone using Bluetooth.
● Create backup — Create a backup of selected data to the memory card.
● Restore backup — Select a backup file stored on the memory card and restore it to
the phone. Select Options > Details for information about the selected backup file.
● Server sync — Synchronize or copy selected data between your phone and another
device, PC or network server (network service).
Connectivity
Your phone provides several features to connect to other devices to transmit and receive
data.
Bluetooth wireless technology
Bluetooth technology allows you to connect your phone using radio waves to a
compatible Bluetooth device within 10 meters (32 feet).
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following
profiles: generic access, network access, generic object exchange, advanced audio
distribution, audio video remote control, hands-free, headset, object push, file transfer,
dial-up networking, SIM access, and serial port. To ensure interoperability between
other devices supporting Bluetooth technology, use Nokia approved enhancements for
this model. Check with the manufacturers of other devices to determine their
compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations. Check with
your local authorities or service provider.
Features using Bluetooth technology increase the demand on battery power and reduce
the battery life.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and take the following steps:
1. Select My phone's name and enter a name for your phone.
2. To activate Bluetooth connectivity select Bluetooth > On.
Bluetooth is active.
3. To connect your phone with an audio enhancement, select Search audio enhanc.
4. To connect your phone with any Bluetooth device in range, select Paired
devices > New.
Select a device and Pair.
Enter a passcode (up to 16 characters) on your phone and allow the connection on
the other Bluetooth device.
If you are concerned about security, turn off the Bluetooth function, or set My phone's
visibility to Hidden. Accept Bluetooth communication only from those you trust.
PC connection to the internet
Use Bluetooth to connect your compatible PC to the internet without PC Suite software.
Your phone must have activated a service provider that supports internet access, and
your PC has to support Bluetooth personal area network (PAN). After connecting to the
network access point (NAP) service of the phone and pairing with your PC, your phone
automatically opens a packet data connection to the internet.
Packet data
General packet radio service (GPRS) is a network service that allows mobile phones to
send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packetdata > Packet data conn. and from the following options:
● When needed — to set the packet data connection to established when an
application needs it. The connection will be closed when the application is
terminated.
● Always online — to automatically connect to a packet data network when you
switch the phone on
You can connect a compatible PC to the phone by Bluetooth or USB data cable and use
the phone as a modem. For details refer to Nokia PC Suite.
See "Nokia support," p. 9.
USB data cable
You can use the USB data cable to transfer data between the phone and a compatible
PC or a printer supporting PictBridge.
To activate the phone for data transfer or image printing, connect the data cable and
select the mode:
● PC Suite — to use the cable for PC Suite
● Printing & media — to use the phone with a PictBridge compatible printer or with
a compatible PC
● Data storage — to connect to a PC that does not have Nokia software and use the
phone as a data storage device
To change the USB mode, select Menu > Settings > Connectivity > USB data
With Nokia PC Suite you can manage your music, synchronize contacts, calendar, notes,
and to-do notes between your phone and the compatible PC or a remote internet server
(network service). You may find more information and PC Suite on the Nokia website.
See "Nokia support," p. 9.
Call
Select Menu > Settings > Call and from the following options:
● Call forwarding — to forward your incoming calls (network service). You may not
be able to forward your calls if some call restriction functions are active.
"Security," p. 31.
● Anykey answer — Select On to answ er an inc omin g call by brie fly pr essi ng any ke y,
except the power key, the left and right selection keys, or the end key.
● Automatic redial — Select On to make a maximum of 10 attempts to connect the
call after an unsuccessful call attempt.
● Voice clarity — Select Active to enhance speech intelligibility especially in noisy
environments.
● 1-touch dialing — Select On to dial the names and phone numbers assigned to the
number keys 2 to 9 by pressing and holding the corresponding number key.
● Call waiting — Select Activate to have the network notify you of an incoming call
while you have a call in progress (network service).
● Summary after call — Select On to briefly display the approximate duration after
each call.
● Send my caller ID — Select Yes to show your phone number to the person you are
calling (network service). To use the setting agreed upon with your service provider,
select Set by network.
● Outgoing call line — to select the phone line 1 or 2 for making calls if supported
by your SIM card (network service)
See
Phone
Select Menu > Settings > Phone and from the following options:
● Language settings — To set the display language of your phone, select Phone
language. Automatic selects the language according to the information on the SIMcard. To set a language for the voice commands, select Recognition lang..
● Memory status — to check the memory consumption
● Automatic keyguard — to lock the keypad automatically after a preset time delay
when the phone is in the standby mode and no function has been used.
● Security keyguard — to ask for the security code when you unlock the keyguard
● Voice recognition —
● Flight query — to let the phone ask when it is switched on whether to use the flight
mode. With the flight mode, all radio connections are switched off.
● Welcome note — to write a note that is shown when the phone is switched on