Nokia 500 User Manual

Nokia 500 Auto Navigation Getting Started Guide
Issue 1 EN
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this PD-14 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/EEC), Annex I, paragraph 6.5, 6.6, 6.8 and 6.9. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/.
At the time of production of this document, the FM transmitter part of this product is intended for use in the following countries: Belgium, Czech Republic, Denmark, Estonia, Finland, Germany, Iceland, Liechtenstein, Luxembourg, Norway, Portugal, Spain, Switzerland, Sweden, Turkey, United Kingdom. For the latest information, refer to http://www.nokia.com.
© 2008 Nokia. All rights reserved.
Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.
Issue 1 EN

Introduction

You can use the Nokia 500 Auto Navigation device for GPS navigation in a car and outdoors. You can also make calls, view photos, watch videos, and listen to music.
This guide briefly describes the setup and basic features of the navigation device. Before using the device, carefully read the user guide on the DVD that is supplied with the device. The user guide provides important safety and maintenance information.
2
© 2008 Nokia. All rights reserved.

Keys and parts

1
2
3
4
5
6
12
11
1. Cover of connector for an optional external GPS antenna
2. Power key
3. Cover of stereo audio-out connector
4. Indicator light
5. Touch screen
6. Volume down key
7. Menu key
8. Volume up key
9. Memory card with adapter
10.Memory card slot
11.Main power switch
12.Mini USB port/charger connector
13.Reset key
8
7
13
9
10
© 2008 Nokia. All rights reserved.
3

First use

1. To switch on the device, slide the main power switch to the right.
In daily use, use the standby mode instead of switching the device off. This way the device starts up faster. To set the device to (or to exit) the standby mode, press and hold the power key for about 3 seconds.
2. When you are asked to calibrate the screen, tap and briefly press the displayed crosshair with your finger. Repeat this as the crosshair moves around the screen.
3. When you are asked to select the language, tap the desired language and . The language is used for display texts and spoken navigation instructions.
4. Carefully read and accept the displayed safety notice, and tap the right arrow. The Navigator application starts and the map view is displayed. Now you can start to use the device.
5. To set the date and time (including time zone and daylight saving), press the menu key, and tap Setup.

Set up Bluetooth connection

1. Switch on the navigation device and your compatible mobile phone.
2. Activate the Bluetooth feature on your phone. See the user guide of your phone for instructions.
3. On the navigation device, press the menu key, and tap Phone.
4. When the device asks you to start pairing from your phone, set your phone to search for Bluetooth devices, and select the navigation device (Nokia PND) from the list of found devices on your phone.
5. Enter the passcode 0000 on your phone to pair and connect the navigation device to it.
In some phones you may need to make the connection separately after pairing. See the user guide of your phone for details.
4
© 2008 Nokia. All rights reserved.
Loading...
+ 7 hidden pages