Nokia 450 Baseband Block

After Sales Technical Documentation

THF–9 Series Transceivers
Chapter 1
Baseband Block
Original 49/96
THF–9
After Sales
Technical Documentation

CONTENTS

Transceiver THF–9 3 – 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related Documentation 3 – 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction 3 – 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional Description 3 – 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Block Diagram 3 – 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Baseband 3 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PWRU 3 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CTRLU 3 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AUDIO 3 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RF 3 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RX 3 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SYNT 3 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TX 3 – 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interconnection Diagram 3 – 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Distribution Diagram 3 – 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page 1 – 2
Original 49/96
After Sales
THF–9
Technical Documentation
Transceiver THF–9
Related Documentation

Introduction

Functional Description

The transceiver electronics consist of the UI module PCB and the RF/system PCB. The UI module is connected to system module with a connector . The system and RF submodules are interconnected with PCB wiring. The unit can be connected to accessories with a bottom system connector , which in­cludes charging and accessory control.
The RF block is designed for a hand portable phone, which operates in NMT450 systems. Purpose of the RF module is to receive and demodulate radio frequency signal from the base station and to transmit a modulated RF signal to the base station.
6E 0261302 Mechanics of THF–9

Block Diagram

THF–9 consists of 2 pcbs, GP3 and GU3F. GP3 consists of 2 submodules, BASEBAND and RF. The BASEBAND module consists of 3 functional blocks: PWRU, CTRLU and AUDIO, and the RF module consists of 3 func­tional blocks: RX, SYNT , and TX. The PCB GU3F is the User Interface mod­ule (UIF–module).
PWRU
CTRLU
BASEBAND–submodule
AUDIO
RX
SYNT
TX
RF–submodule
ANT
DUP
LCDLCD
Original 49/96
UIF–module
LCD Driver
MIC/EAR BUZZER
Page 1 – 3
THF–9
After Sales

Baseband

PWRU
The power block makes the supply voltages for the phone and includes also the charging electronics.
CTRLU
Main Features of the CTRLU block – system control – communication control – authentication – power up/down control – accessory monitoring – battery monitoring
Technical Documentation
AUDIO
RF
RX
SYNT
– production testing – RF–controls – UIF–interface – M2BUS interface
The block includes microphone and earpiece amplifier and all necessary audio functions.
The RX module receives and demodulates the radio frequency signal from the base station.
The transmitter synthesizer generates a frequency modulated RF signal for the transmitter section. The transmission frequency is generated by a phase–locked loop (PLL). The synthesizer circuit contains VCO, synthesizer logic and loop filter.
TX
Page 1 – 4
The receiver synthesizer operates in the same way as the corresponding cir­cuit in the TX synthesizer . The first injection frequency is supplied to the re­ceiver module.
The Transmitter module generates and amplifies the RF signal to be trans­mitted to the base station.
Original 49/96
After Sales
THF–9
Technical Documentation

Interconnection Diagram

BATTERY PACK
SYSTEM / RF MODULE
UIF MODULE
LCD KEYBOARD
Baseband Block
TO / FROM ACCESSORIES CHARGER EXT. ANTENNA
MICROPHONE EARPHONE BUZZER

Power Distribution Diagram

VBAT
VCS
PWRU
VA,VL,VL2=3.3 V VL3=4.75 V VL4=4.1 V
VBAT,VRF=5.3....8.8 V
VREF VL VL2 VL3 VA VL4
RECEIVER
CTRLU
VCCR
AUDIO
TRANSMITTERSYNTHESIZER
VRF
LCD Driver
UIF–module
VBAT
LCDLCD
Original 49/96
Page 1 – 5
THF–9
After Sales
Technical Documentation
This page intentionally left blank.
Page 1 – 6
Original 49/96
Loading...