Nokia 1255(RH-79), 1255, RH-79 Technical Manual

Page 1
Issue 1 01/2006 Company Confidential © 2006 Nokia Corporation
Nokia Customer Care
1255 (RH-79)
Mobile Terminal
Technical Summary
Page 2
1255 (RH-79) Technical Summary
Page 2 © 2006 Nokia Corporation Company Confidential Issue 1 01/2006
Contents Page
Introduction............................................................................................................... 3
Sales Package ..................................................................................................4
Supported Accessories......................................................................................4
Exploded View.......................................................................................................... 5
Assembly Parts List...........................................................................................6
Baseband Module Overview.................................................................................... 7
MSM6000..........................................................................................................7
PM6610.............................................................................................................7
Flash Memory....................................................................................................7
RF Module Overview................................................................................................ 9
Transmitter........................................................................................................9
Receiver............................................................................................................9
Page 3
1255 (RH-79)
Nokia Customer Care Technical Summary
Issue 1 01/2006 © 2006 Nokia Corporation Company Confidential Page 3
Introduction
The Nokia 1255 mobile terminal offers the following engines and features:
Model Type Frequency(MHz) GPS Module
1255 RH-79 800 No
z 96 x 65 pixel black and white display z Removable User Information Module (RUIM), disabled in non-RUIM
markets
z Internal antenna z Internal vibra z EVRC Vocoder z 8 polyphonic ringtones z Predictive text
Parameter Value and Unit
BL-5C Talk time Standby time
Up to 240 min
Up to 240 hours Dimensions: Volume Length Width Thickness Weight
74.3 cc
104.5 mm
43.5 mm
19.28 mm
84 grams
Page 4
1255 (RH-79) Technical Summary
Page 4 © 2006 Nokia Corporation Company Confidential Issue 1 01/2006
Sales Package
Name Type
Transceiver RH-79 Standard Battery (970 mAh Li-Ion)
BL-5C
Charger AC-3
Supported Accessories
Type Name
AC-3 Compact Charger AC-4 Travel Charger DC-4 Car Power Adapter HS-9 CDMA 2.5mm headset
Page 5
1255 (RH-79)
Nokia Customer Care Technical Summary
Issue 1 01/2006 © 2006 Nokia Corporation Company Confidential Page 5
Exploded View
Microphone (A1)
I014
SAM Module (A1)
I011
Shielding Case
I009
RUIM Lid (A1)
I016
Vibrator (A1)
I013
A Cover Assy
I001
Domesheet
I008
LCD Module Sh ielding Assy
I004
Screw x 6
I003
(T1.8x6)
Keymat
I002
Receiver
I005
D Cover Blank (A1)
I010
RUIM Label
I017
DC Jack (A1)
I015
LCD Module
I006
Engine
I007
A1 = D Cover Assy
Release Spring (A1)
I018
Release Button (A1)
I019
B Cover Blank
I021
Speaker (A1)
I012
Type Label (A1)
I020
Microphone (A1)
I014
SAM Module (A1)
I011
Shielding Case
I009
RUIM Lid (A1)
I016
Vibrator (A1)
I013
A Cover Assy
I001
Domesheet
I008
LCD Module Sh ielding Assy
I004
Screw x 6
I003
(T1.8x6)
Screw x 6
I003
(T1.8x6)
Keymat
I002
Receiver
I005
D Cover Blank (A1)
I010
RUIM Label
I017
DC Jack (A1)
I015
LCD Module
I006
Engine
I007
A1 = D Cover Assy
Release Spring (A1)
I018
Release Button (A1)
I019
B Cover Blank
I021
Speaker (A1)
I012
Type Label (A1)
I020
Page 6
1255 (RH-79) Technical Summary
Page 6 © 2006 Nokia Corporation Company Confidential Issue 1 01/2006
Assembly Parts List
Qty Description CCT Code
1 A Cover Assy I001 1 Keymat I002 6 Screw I003 1 LCD Module Shielding Assy I004 1 Receiver I005 1 LCD Module I006 1 Engine I007 1 Domesheet I008 1 Shielding Case I009 1 D Cover Blank I010 1 SAM Module Module I011 1 Speaker I012 1 Vibrator I013 1 Microphone I014 1 DC Jack I015 1 RUIM Lid I016 1 RUIM Label I017 1 Release Spring I018 1 Release Button I019 1 Type Label I020 1 B Cover Blank I021
Page 7
1255 (RH-79)
Nokia Customer Care Technical Summary
Issue 1 01/2006 © 2006 Nokia Corporation Company Confidential Page 7
Baseband Module Overview
The mobile terminal uses a CDMA single mode engine (Cellular/ 800) with Qualcomm baseband consisting of three ASICs:
z Mobile Station Modem processor, MSM6000 (MSM) z Power Management IC, PM6610 (PM) z 32MB Flash memory with 8MB of Psram memory
MSM6000
The MSM6000 device is a mixed-signal baseband chip that enables manufacturers to meet or exceed the specifications of mobile stations for worldwide cdmaOne and 3G CDMA systems, including IS-95-A, IS-95-B, IS-2000 1x Release 0.
Subsystems within the MSM6000 device include a CDMA processor, a DFM processor, QCT’s QDSP2000™ DSP for voice compression, PLL and an ARM® ARM7TDMI microprocessor. Also integrated in the MSM6000 device are an audio voice codec and analog interfaces for the radioOne RF ASICs. Controllers for an R-UIM, GPIOs, and peripheral interfaces complete the system integration.
PM6610
The PM6610 device integrates all low-cost wireless handset power management, general housekeeping, and user interface support functions into a single mixed signal IC. Its versatile design is suitable for low-cost CDMA handsets.
The power management portion accepts power from common sources – battery, external charger or adapter – and generates all the regulated voltages needed to power the appropriate handset electronics. It monitors and controls the power sources, detecting which sources are applied, verifying that they are within acceptable operational limits, and coordinates battery recharging while maintaining the handset electronics supply voltages. On-chip voltage regulators generate seven programmable output voltages using low dropout voltage regulators, all derived from a common trimmed voltage reference.
Flash Memory
The Simultaneous Read/Write architecture provides simultaneous operation by dividing the memory space into 4 banks, which can be considered to be four separate memory arrays. The device can improve overall system performance by
Page 8
1255 (RH-79) Technical Summary
Page 8 © 2006 Nokia Corporation Company Confidential Issue 1 01/2006
allowing a host system to program or erase in one bank, then immediately and simultaneously read from another bank with zero latency.
This device requires a single 3.0 volt power supply for both read and write functions. It’s command set is entirely compatible with the JEDEC 42.4 single-power-supply Flash standard.
Page 9
1255 (RH-79)
Nokia Customer Care Technical Summary
Issue 1 01/2006 © 2006 Nokia Corporation Company Confidential Page 9
RF Module Overview
The RF module receives and demodulates the radio frequency signals from the base station and transmits the modulated RF signals to the base station. It consists of the following functional sub-modules:
z Transmitter, RFT6122
z Receiver, RFR6122
Transmitter
The RFT6122 IC is a baseband-to-RF transmitter IC, an integral component of QUALCOMM’s radioOne CMOS RF chipset. All radioOne ICs are highly integrated and fulfill CDMA2000 standard. Overall radioOne performance depends on the combined, complementary performance of all the ICs in the chipset.
The RFT6122 IC provides the Zero-IF transmit signal path for Cellular-CDMA transmission. For this chipset, Cellular-CDMA refers to band classes 0 and 3 as defined by the cdma2000 standard, with mobile station transmitters operating between 824 and 925 MHz. The transmit signal path includes baseband amplifiers, quadrature upconversion, gain control RF amplification, and an output driver amplifier.
Receiver
The RFR6122 IC is an RF-to-baseband receiver IC, an integral component of QUALCOMM’s radioOne CMOS RF chipset. All radioOne ICs are highly integrated and fulfill cdma2000 standard. Overall radioOne performance depends uon the combined, complementary performance of all the ICs in the chipset.
The RFR6122 IC provides the Zero-IF receiver signal path for Cellular-CDMA reception. For this chipset, Cellular-CDMA refers to band classes 0 and 3 as defined by the cdma2000 standard, with mobile station receivers operating between 832 and 894 MHz. The Rx signal path includes the LNA, quadrature downconversion, and baseband functions.
Page 10
1255 (RH-79) Technical Summary
Page 10 © 2006 Nokia Corporation Company Confidential Issue 1 01/2006
This page intentionally left blank.
Loading...