Nokia 02705X6 User Manual

Nokia Bluetooth Stereo Headset BH-503 User Guide

Issue 1 EN

DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HS-95W product is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/.

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

Unauthorized changes or modifications to this device may void the user's authority to operate the equipment.

Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

Issue 1 EN

Contents

1. Introduction .......................... 4

Bluetooth wireless technology........... 4

2. Get started ............................ 5

Overview................................................... 5

Chargers.................................................... 5

Charge the battery................................. 6

Switch the headset on or off.............. 6

Switch on.............................................. 6

Switch off ............................................. 7

Pair and connect the headset............. 7

Pair and connect the headset with a mobile phone that has

a music player feature ...................... 7

Pair and connect the headset

with a music player ...........................

Disconnect the headset .................... 8

Reconnect the headset ..................... 8

3. Basic use............................... 9

Place the headset over the ears......... 9

Adjust the volume.................................. 9

Call handling ........................................... 9

Listen to music..................................... 10

Clear the settings or

reset the headset ............................... 10

4. Battery information........... 11

Care and maintenance........... 12

English

Introduction

1. Introduction

With the Nokia Bluetooth Stereo Headset BH-503, you can listen to music from your compatible music player and make and receive hands-free calls using your mobile phone. The music player can be the music player feature of your mobile phone or a separate music device.

You can use the headset with compatible devices that support Bluetooth wireless technology.

Read this user guide carefully before using the headset. Also read the user guide for your mobile phone, which provides important safety and maintenance information, and the user guide for your music device. Keep the headset and its accessories out of reach of small children.

■ Bluetooth wireless technology

Bluetooth wireless technology allows you to connect compatible devices without cables. A Bluetooth connection does not require that the headset and the other device be in line of sight, but the maximum distance between the devices is 10 meters (33 feet). The closer the devices are to each other, the better is the performance. The optimal operating range is shown in dark grey in the picture. The connection is subject to interference from distance and obstructions (shown in light grey) or other electronic devices.

The headset is compliant with Bluetooth Specification 2.0 + EDR supporting the following profiles: Headset Profile 1.1, Hands-Free Profile

<10m

1.5, Advanced Audio Distribution Profile (A2DP) 1.0, and Audio Video Remote Control Profile 1.0. Check with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

2. Get started

■ Overview

The headset contains the following parts:

Get started

• Volume down key (1)

• Volume up key (2)

• Multifunction key (3)

• Indicator light (4)

• Charger connector (5)

• Rewind key (6)

• Play/pause key (7)

• Fast forward key (8)

• Microphone (9)

Before you can start using the headset, you must charge the battery and pair the headset with a compatible mobile phone.

Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media

English

near the headset, because information stored on them may be erased.

■ Chargers

Check the model number of any charger before using it with this headset. The headset is intended for use with the AC-4, AC-5, and DC-4 chargers.

Warning: Use chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous.

When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Get started

■ Charge the battery

The headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the headset, as you may damage the headset.

1. Connect the charger to a wall outlet.

2. Connect the charger cable to the charger connector. The indicator light is red while charging. It may take a while before charging starts. If charging does not start, disconnect the charger, plug it in again, and retry.

Charging the battery fully may take up to 1 hour and 15 minutes.

3. When the battery is fully charged, the indicator light turns green. Disconnect the charger from the headset and the wall outlet.

The fully charged battery has power for up to 13 hours of talk time, up to 10 days of standby time, or up to 13 hours of music playing time (or 75 minutes of music playing time with 20 minutes charging). However, the times may vary with different compatible Bluetooth devices, usage settings, usage styles, and environments.

When battery power is low, the headset beeps at regular intervals, and the indicator light slowly flashes red. Recharge the battery.

■ Switch the headset on or off

Switch on

To switch on, press and hold the multifunction key for about 2 seconds. The headset beeps, and the green indicator light is briefly displayed.

When the headset tries to connect to the paired mobile phone or music player that you have last used with it, the indicator light slowly flashes green. When the headset is connected to a paired device and is ready for use, the indicator light slowly flashes blue. If the headset has not been paired with a device, it automatically enters the pairing mode (see “Pair

and connect the headset,” p. 7).

If you connect the headset to a device but do not use it for a while, switch off the headset to save power.

Get started

Switch off

To switch off, press and hold the multifunction key for about 5 seconds. The headset beeps, and the red indicator light is briefly displayed.

■ Pair and connect the headset

Pair and connect the headset with a mobile phone that has a music player feature

If your phone supports the A2DP Bluetooth profile and has a music player feature, you can use the phone to make and receive calls and to play music with the headset.

1. Ensure that your phone is switched on.

2. If the headset has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the indicator light starts to flash blue quickly.

If the headset has been previously paired with another device, switch off the headset, and press and hold the multifunction key until the indicator light starts to flash blue quickly.

3. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. See the user guide of your phone for instructions.

English

4. Select the headset from the list of found devices.

5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.

If pairing is successful, the headset appears in the menu of the mobile phone where you can view the currently paired Bluetooth devices.

When the headset is connected with your mobile phone and ready for use, the indicator light of the headset slowly flashes blue.

Get started

Pair and connect the headset with a music player

If your phone does not support the A2DP Bluetooth profile, you can separately pair the headset with the phone and a music player that supports this Bluetooth profile.

If you have paired and connected the headset with your phone, disconnect the headset from it before pairing the headset with a music player.

To pair the headset with a music player, follow the instructions in “Pair

and connect the headset with a mobile phone that has a music player feature,” p. 7. If your music player does not have a keypad, it may use the

Bluetooth passcode 0000 by default. If this is not the case, see the user guide of your music player to change the default Bluetooth passcode to

0000.

If pairing is successful and the headset is connected with your music player, the indicator light of the headset slowly flashes blue.

Disconnect the headset

To disconnect the headset from your device, switch off the headset, or disconnect it in the Bluetooth menu of your device.

You do not need to delete pairing with the headset to disconnect it.

Reconnect the headset

To connect the headset to the phone or music player that you have last used with it, switch on the headset, or make the connection in the Bluetooth menu of your device.

In your device, you may be able to allow the headset to connect to it automatically when the headset is switched on. To do this in Nokia devices, change your paired device settings in the Bluetooth menu.

3. Basic use

■ Place the headset over the ears

Lower the neckband behind your head. Place the headset over your ears so that the speaker pads rest comfortably on your ears.

Place the pad indicated with L on the left ear and the pad with R on the right ear.

Warning: When using the headset your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Basic use

English

■ Adjust the volume

To adjust the headset volume, press the volume up key to increase or the volume down key to decrease the volume during a call or while listening to music.

■ Call handling

To make a call, use your mobile phone in the normal way when the headset is connected to it.

If your phone supports redialing with the headset, press the multifunction key twice quickly when no call is in progress.

If your phone supports voice dialing with the headset, press and hold the multifunction key for about 2 seconds until the phone starts voice dialing, and proceed as instructed in the user guide of the phone. Voice dialing cannot be used during a call.

To answer a call, press the multifunction key, or use the keys of the phone. To reject the call, press the multifunction key twice quickly.

To end a call, press the multifunction key, or use the keys of the phone.

To mute or unmute the microphone during a call, press the play/pause key.

Basic use

To switch the call from the headset to a connected phone, press and hold the play/pause key for about 2 seconds. To switch the call back to the headset, press the multifunction key once.

■ Listen to music

To listen to music, connect the headset to a compatible music player such as a mobile phone with a music player feature or other music device. The music player must support the A2DP Bluetooth profile.

When the headset is connected to a phone but not to a separate music device, the headset can only be used to make and receive calls if the phone does not have a music player feature.

The available music functions depend on your music player.

If you receive or make a call while listening to music, the music is paused until you end the call.

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.

To play a track, select it in the music player, and press the play/pause key.

To pause or resume playing, press the play/pause key. To stop playing, press and hold the play/pause key for about 2 seconds.

To select the next track, press the fast forward key. To select the previous track, press the rewind key. To scroll through the current track quickly during playback, press and hold either key.

■ Clear the settings or reset the headset

To clear the pairing and volume settings, switch off the headset, and press and hold the multifunction key and press the volume up key until the indicator light alternates red, green, and blue three times.

To reset the headset if it stops functioning, although it is charged, plug the charger into the headset, and press and hold the multifunction key and press the volume up key. The reset does not clear the headset settings.

Battery information

4. Battery information

Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

Never use any charger that is damaged.

Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged.

English

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.

诺基亚蓝牙立体声耳机 BH-503 用户手册

第 1 版

声明我们诺基亚公司郑重声明产品 HS-95W 符合指令 1999/5/EC 中的基本要求及其他相关条款。此声明的全文可经由 http://www.nokia.com/phones/declaration_of_conformity/ 找到。

在未经诺基亚事先书面许可的情况下，严禁以任何形式复制、传递、分发和存储本文档中的任何内容。

诺基亚、 Nokia 和 Nokia Connecting People 是诺基亚公司的注册商标。在本文档中提及的其他产品或公司的名称可能是其各自所有者的商标或商名。

Bluetooth 是 Bluetooth SIG, Inc. 的注册商标。

诺基亚遵循持续发展的策略。因此，诺基亚保留在不预先通知的情况下，对本文档中描述的任何产品进行修改和改进的权利。

在任何情况下，诺基亚均不对任何数据或收入方面的损失，或任何特殊、偶然、附带或间接损失承担责任，无论该损失由何种原因引起。

本文档的内容按 “现状”提供。除非适用的法律另有规定，否则不对本文档的准确性、可靠性和内容做出任何类型的、明确或默许的保证，其中包括但不限于对适销性和对具体用途的适用性的保证。诺基亚保留在不预先通知的情况下随时修订或收回本文档的权利。有关最新的产品更新文档，请参见 http://www.nokia.com.cn。

产品的供货情况可能因地区而异。请向邻近的诺基亚指定经销商查询。

未经授权而对本设备进行的更改或改装可能导致用户丧失使用设备的权利。

出口控制本设备可能包含受美国和其他国家或地区的出口法律和法规控制的商品、技术或软件。严禁任何违反法律的转移行为。

第 1 版

。

1. 简介................................. 4

蓝牙无线技术 ............................... 4

2. 使用入门.......................... 5

概述 ............................................... 5

充电器 ........................................... 5

为电池充电 ................................... 6

启动或关闭耳机 ........................... 6

启动 ............................................ 6

关闭 ............................................ 6

配对并连接耳机 ........................... 7

将耳机与带有音乐播放器

功能的手机配对并建立连接 .... 7

将耳机与音乐播放器配对

并建立连接 ................................ 7

断开耳机的连接 ........................ 8

重新连接耳机 ............................ 8

3. 基本使用方法................... 9

将耳机佩戴在耳部 ....................... 9

调节音量 ....................................... 9

通话管理 ....................................... 9

欣赏音乐 ..................................... 10

清除设置或恢复耳机的

出厂设置 ..................................... 10

4. 电池信息........................ 11

维护和保养........................ 12

简体中文

。 3

+ 33 hidden pages

Nokia 02705X6 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual