NC6000A/NC8000A Series
Count on the Noise Leader. Count on Noise Com.
Data Sheet
• Output White Gaussian noise
• Attenuator range 0 to 10 dB in 1 dB steps
• Impedance 50 Ohms
• Typical VSWR 1.5:1
• Standard connector SMA female
(K female for NC6240)
• Dimensions:
(NC6000) 8.5 in. wide x 5 in. high x 12.25 in. deep
(NC8000) 17 in. wide x 5.25 in. high x 13 in. deep
• Power requirements are 120 VAC, 60 Hz, at
500 mA for the NC6000, 1500 mA for the NC8000
• Operating temperature -10°to +60°C
The NC6000A and NC8000A Series instruments are
designed for general-purpose noise applications on the
bench, or in a rack test station. The manual controls make it
simple to operate and reduce test set up time. The standard
output power NC6000 is typically used for BER, and SNR
applications, while the high power NC8000 is a good
candidate for signal jamming. Each instrument contains a
precision noise source that delivers repeatable, symmetrical
white Gaussian noise and is integrated with an amplifier,
attenuator, and power supply. Noisecom will modify base
units for specific customer needs. For pricing and
availability, consult the factory.
NC6000A/8000A Noise Generator Series
General Specifications
2
Specifications
3
Applications
• BER Testing
• Military Jamming
• CATV Testing
• Video Testing
• General Purpose
NC6000/NC8000 Series Output Characteristics
Model Frequency Band Power PSD Flatness uV/ root
(dBm) dBm/Hz (dB) (Hz)
NC6000
NC6101 10 Hz - 20 kHz +13 -30 ±0.5 7071
NC6103 10 Hz - 500 kHz +13 -44 ±0.5 1414
NC6105 10 Hz - 10 MHz +13 -57 ±0.75 316
NC6107 100 Hz - 100 MHz +13 -67 ±1.0 100
NC6108 100 Hz - 500 MHz +10 -77 ±1.5 31.6
NC6109 100 Hz - 1 GHz +10 -80 ±2.0 22.4
NC6110 100 Hz- 1.5 GHz +10 -82 ±2.0 18.2
NC6111 1 GHz - 2 GHz +10 -80 ±2.0 22.4
NC6112 1 MHz - 2 GHz 0 -93 ±2.0 5.01
NC6124 2 GHz - 4 GHz -10 -106 ±2.0 1.58
NC6126 2 GHz - 6 GHz -15 -113 ±2.0 0.5
NC6218 2 GHz - 18 GHz -20 -122 ±3.0 0.18
NC8000
NC8103 500 Hz - 500 kHz +30 -27 ±2.0
NC8105 500 Hz - 10 MHz +30 -40 ±2.0
NC8107 250 kHz - 100 MHz +30 -50 ±2.0
NC8108 1 MHz - 200 MHz +30 -53 ±2.0
NC8109 1 MHz - 300 MHz +30 -55 ±2.0
NC8110 2 MHz - 500 MHz +30 -57 ±2.0
NC8111 5 MHz - 1 GHz +30 -60 ±2.5
* High power units have a reduced crest factor.
Options
Option number Description
NC6/NC8opt01 100 dB attenuator in
10 dB steps*
NC6/NC8opt02 110 dB attenuator in
1 dB steps (two attenuators)**
NC6/NC8opt03 Line power 230 VAC, 50 Hz
NC6/NC8opt04 Combiner for input signal
(6dB loss in noise
and signal paths)
NC6opt06 19 in. Rack mount (NC6000 only)
17 in. wide by 3.5 in. high
by 13 in. deep
NC6/NC8opt07 N female output connector
NC6/NC8opt08 BNC female output connector
NC6/NC8opt09 75-ohm output
impedance (6 dB loss)
NC6/NC8opt10 Additional 1 dB attenuator in
0.1 dB steps***
NC6/NC8opt11 Custom frequency, power,
or flatness requirement****
* 60 dB for NC6214 and NC6218
** 69 dB for NC6214 and NC6218
*** N/A for NC6124, NC6218 and NC6240
**** Consult factory for pricing and availability
N/NC6000/0606/EN
© Copyright 2006
Noise Com
(A Wireless Telecom Group Company)
All rights reserved.
Note: Specifications, terms and
conditions are subject to change
without prior notice.
25 Eastmans Road
Parsippany, NJ 07054 U.S.A.
Phone: +1-973-386-9696
Fax: +1-973-386-9191
Email: info@noisecom.com
Web site: www.noisecom.com
Loading...