Page 1
3
Page 2
4
Page 3
1693
Page 4
1695
Page 5
Attachment No.4
0
TEST VALUE AND TEST LIMIT (GST ONLY — NOT APPLICABLE TO CONSULT-II)
The following is the information specified in Mode 6 of SAE J1979.
The test value is a parameter used to determine whether a system/circuit diagnostic test is “OK” or “NG” while
being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the
maximum or minimum value and is compared with the test value being monitored.
Items for which these data (test value and test limit) are displayed are the same as SRT code items.
These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID) and can be displayed on the GST screen.
SRT item Self-diagnostic test item DTC
CATALYST Three way catalyst function
EVAP SYSTEM
HO2S
HO2S HTR
EGR SYSTEM
★
１：Except models V41 VG33E engine 2001MY and V41 VG33E engine 20
★
1
EVAP control system (Small leak)
EVAP control system purge flow monitoring P1447 06H 83H Min. X mV
Heated oxygen sensor 1
Heated oxygen sensor 2
Heated oxygen sensor 1 heater
Heated oxygen sensor 2 heater
EGR function
EGRC-BPT valve function
P0420 01H 01H Max. X P0420 02H 81H Min. X P0440 05H 03H Max. X P1440 05H 03H Max. X -
P0133 09H 04H Max. X ms
P0131 0AH 84H Min. X mV
P0130 0BH 04H Max. X mV
P0132 0CH 04H Max. X mV
P0134 0DH 04H Max. X s
P0139 19H 86H Min. X mV/500ms
P0137 1AH 86H Min. X mV
P0140 1BH 06H Max. X mV
P0138 1CH 06H Max. X mV
P0135 29H 08H Max. X mV
P0135 2AH 88H Min. X mV
P0141 2DH 0AH Max. X mV
P0141 2EH 8AH Min. X mV
P0400 31H 8CH Min. X ℃
P0400 32H 8CH Min. X ℃
P0400 33H 8CH Min. X ℃
P0400 34H 8CH Min. X ℃
P1402 35H 0CH Max. X ℃
P0402 36H 0CH Max. X P0402 37H 8CH Min. X -
Test value
(GST display)
TID CID
Te s t limit Application Unit
Applicable ･: Not applicable
Loading...