Nissan LEAF 2013 Navigation Manual
2013 LEAF
NAVIGATION SYSTEM OWNER'S MANUAL
For your safety, read carefully and keep in this vehicle.
FOREWORD
NISSAN NAVIGATION SYSTEM
HELPDESK CONTACT INFORMATION
For assistance or inquiries about the NISSAN
Navigation System, or to order updated map
data, contact the NISSAN NAVIGATION SYSTEM HELPDESK at:
. ADDRESS: P.O. Box 1588, Orem, UT
84059-992
. E-MAIL: Nissan-Navi-Info@navteq.com
. WEB SITE: www.NissanNavigation.com or
www.nissan.ca
. PHONE: 1-888-661-9995
. HOURS: 6:00 AM to 5:00 PM (Pacific
Time)
NISSAN CONSUMER AFFAIRS DEPARTMENT
For assistance or inquiries about the NISSAN
warranty, service or general questions, contact
the NISSAN Consumer Affairs Department at:
For U.S. customers
Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003
1-877-NOGASEV
1-877-664-2738
For Canadian customers
Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5
1-877-NOGASEV
1-877-664-2738
Thank you for purchasing a NISSAN vehicle.
This user’s manual is for the navigation system
only. This manual contains operating instructions
for the NISSAN Navigation System offered in
your NISSAN vehicle.
Please read this manual carefully to ensure safe
operation of the navigation system.
. Because of possible specification changes
and optional equipment, sections of this
manual may not apply to your vehicle.
. All information, specifications and illustra-
tions in this manual are those in effect at the
time of printing. NISSAN reserves the right
to change specifications or design at any
time without notice.
. Do not remove this manual from the vehicle
when selling this vehicle. The next user of
this navigation system may need the manual.
Table of
Introduction
0
Contents
LEAF Navigation System overview
Getting Started
Unique EV functions
Navigation
Audio system
CARWINGS
Viewing technical information
Bluetooth
Voice recognition
Monitor system (if so equipped)
Troubleshooting guide/General system information
Index
TM
®
Hands-Free Phone System
IT
1
2
3
4
5
6
7
8
9
10
11
0 Introduction
How to use this manual........................................................... 0-2
For safe operation................................................................ 0-2
Reference symbols .............................................................. 0-2
Safety information ..................................................................... 0-2
Laser product ............................................................................. 0-4
HOW TO USE THIS MANUAL SAFETY INFORMATION
This manual uses special words, symbols and
icons, organized by function.
Please refer to the following items and familiarize
yourself with them.
FOR SAFE OPERATION
WARNING
This is used to indicate the presence of
a hazard that could cause death or
serious personal injury. To avoid or
reduce the risk, the procedures must
be followed precisely.
CAUTION
This is used to indicate the presence of
a hazard that could cause minor or
moderate personal injury or damage to
your vehicle. To avoid or reduce the risk,
the procedures must be followed carefully.
NOTE:
Indicates items that help you understand
and maximize the performance of your
vehicle. If ignored, they may lead to a
malfunction or poor performance.
REFERENCE SYMBOLS
INFO:
This indicates information that is necessary for
efficient use of your vehicle or accessories.
Reference page:
This indicates the title and page that you should
refer to.
[]:
This indicates a key/item displayed on the
screen.
Voice Command:
This indicates an operation by voice command.
This system is primarily designed to help you
reach your destination, and it also performs
other functions as outlined in this manual.
However, you, the driver, must use the system
safely and properly. Information concerning road
conditions, traffic signs and the availability of
services may not always be up-to-date. The
system is not a substitute for safe, proper and
legal driving.
Before using the navigation system, please read
the following safety information. Always use the
system as outlined in this manual.
WARNING
. When the driver wants to operate
the navigation system, first park the
vehicle in a safe location and set the
parking brake. Operating the system while driving can distract the
driver and may result in a serious
accident.
. Do not rely on route guidance alone.
Always be sure that all driving
maneuvers are legal and safe in
order to avoid accidents.
. Do not disassemble or modify this
system. If you do, it may result in
accidents, fire or electrical shock.
0-2 Introduction
. If you notice any foreign objects in
the system hardware, spill liquid on
the system or notice smoke or a
smell coming from it, stop using the
system immediately and contact a
NISSAN certified LEAF dealer.
Ignoring such conditions may lead
to accidents, fire or electrical shock.
CAUTION
. Do not use this system if you notice
any malfunctions such as a frozen
screen or the lack of sound. Continued use of the system may result
in accidents, fire or electrical shock.
. Some states/provinces may have
laws limiting the use of video
screens while driving. Use this system only where it is legal to do so.
. Extreme temperature conditions
[below − 48F(−208C) and above
1588F (708C)] could affect the performance of the system.
INFO:
Do not keep the navigation system running with
the READY to drive indicator light is OFF. Doing
so may discharge the 12-volt battery. When you
use the navigation system, always make sure the
READY to drive indicator light is ON.
NOTE:
. Establishing the CARWINGS
TM
service
is necessary before using this service.
. To check the Li-ion battery charging
status or to use the remote heater and
air conditioner using an internet enabled smart phone or personal computer, the following conditions must be
met:
— The vehicle must be located in a
cellular phone or smart phone coverage area.
— The internet enabled cellular phone
or smart phone must be located in a
cellular phone or smart phone coverage area.
— The computer must be connected to
the internet.
— A cellular phone must be used to
communicate with the vehicle.
— A cellular phone capable of text
messaging must be used to receive
text message regarding vehicle
charge status.
. When the remote heater and air condi-
tioner is set, the system operates the
heater and air conditioner to adjust the
in-cabin temperature to a set temperature.
. When the charge connector is discon-
nected from the vehicle, the heater and
air conditioner operates using vehicle
Li-ion battery electric power.
. If the remote heater and air conditioner
function and Li-ion battery charging are
performed at the same time, Li-ion
battery charging will take longer than
usual due to the power used to heat or
cool the vehicle.
. Certain remote functions require a
compatible smart phone, which is not
included with vehicle.
. CARWINGS
TM
information system features are included through a subscription service which requires owner
consent to activate. The subscription
must be active to use these features.
Introduction 0-3
. CARWINGSTMcommunications may be
received at a verified e-mail address or
by SMS/text messaging-enabled cellular phone.
. Standard text rates and/or data usage
may apply depending on your carrier.
LASER PRODUCT
This navigation system is certified as a Class 1
laser product.
The navigation system complies with DHHS
Rules 21 CFR Chapter 1, Subchapter J.
WARNING
. Do not disassemble or modify this
system. There are no user serviceable parts in this navigation system.
. If maintenance, adjustments and
operations other than those specified in this manual are attempted,
injury due to laser radiation and
exposure could occur.
Required SiriusXM Satellite
Radio and NavTraffic monthly
subscriptions are sold separately. NavTraffic are only available in select markets. For more
information,
see www.siriusxm.com/navtraffic.
SiriusXM Satellite Radio requires
subscription, sold separately.
Not available in Alaska, Hawaii or
Guam. For more information, visit
www.siriusxm.com.
Bluetooth®is a trademark owned
by Bluetooth SIG, Inc., and
licensed to Clarion.
0-4 Introduction
LEAF Navigation System overview
Features of LEAF Navigation System.................................. IT-2
Unique EV functions .......................................................... IT-2
Telematics service............................................................... IT-4
FEATURES OF LEAF NAVIGATION
SYSTEM
UNIQUE EV FUNCTIONS
In addition to the conventional navigation functions, the LEAF navigation system also offers
specific support for driving an EV.
CAUTION
Charging station information may not
be detailed in all areas or reflect current
charging station locations. For up to
date information about charging stations, such as business hours or charging equipment, NISSAN recommends
that you directly access the information
on your own. Additionally, always check
the remaining amount of battery charge
and set a reasonable driving schedule.
Driving range display
By pressing the button on the steering
wheel, you can display the estimated one way
range that the vehicle can be driven from the
current location based on the amount of
remaining battery charge. When a destination
or a waypoint has been set, the driving area will
be displayed with the destination or waypoint in
the center.
“Displaying estimated driving range”
(page 2-3)
Charging stations located within the driving area
will also be displayed. By moving the map, you
can set a charging station as a destination or
waypoint.
“Setting a charging station as destination”
(page 2-4)
Charging station information
NOTE:
Charging stations that have been searched
for using this function are not necessarily
equipped with devices that can be used to
charge a LEAF. Be sure to confirm this in
advance before setting a charging station
as the destination.
INFO:
Charging station information is updated monthly
to add newly installed charging stations locations.
Icons for charging stations can be displayed on
the map. You can also display only charging
stations that are equipped with quick charge
devices or only charging stations that are
equipped with normal charge devices.
“Displaying charging station icons on map”
(page 2-5)
IT-2 LEAF Navigation System overview
You can search for charging stations near the
current location, set a charging station as a
destination or waypoint, and check detailed
information about charging stations.
“Finding charging station” (page 3-25)
Energy information display
Timer functions
When connecting to the NISSAN CARWINGS
Data Center, the system will periodically perform
an automatic update of information for charging
stations near your home. The system will also
automatically update information for charging
stations near the current vehicle location when
the Li-ion battery charge is low. You can also
manually update the charging stations around
your current vehicle location at any time.
“Updating charging station information”
(page 2-7)
Estimated driving range, average energy economy and instant energy economy are displayed.
“Viewing energy economy information”
(page 2-8)
Estimated driving range and energy usage of
various systems are displayed. Also, variation of
the estimated driving distances between the
climate control ON and OFF is displayed.
“Viewing energy usage information”
(page 2-9)
Charging of the Li-ion battery will automatically
start at a scheduled time according to the start
time, end time and day of the week set. The
timer charge function allows two different timer
settings. Each timer charge can be set to
activate on a different day of the week. If no
timer is set, the charge will start immediately
after connecting the charge connector.
“Setting timer charge” (page 2-10)
The air conditioner starts to operate at the time
of day and day of the week specified in the
LEAF Navigation System overview IT-3
settings. This pre cools or heats the passenger
compartment before starting to drive. Electric
power consumption from the Li-ion battery
resulting from heater and air conditioner operation can be reduced because the temperature in
the passenger compartment is adjusted before
starting to drive.
“Setting Climate Ctrl. Timer” (page 2-12)
TELEMATICS SERVICE
This vehicle incorporates a communication
device that is called a TCU (Telematics Communication Unit). The communication connection between this unit and the NISSAN
CARWINGS Data Center allows for various
services.
NOTE:
. Establishing the CARWINGS
is necessary before using this service.
. To check the Li-ion battery charging
status or to use the remote heater and
air conditioner using an internet enabled smart phone or personal computer, the following conditions must be
met:
— The vehicle must be located in a
cellular phone or smart phone coverage area.
TM
service
— The internet enabled cellular phone
or smart phone must be located in a
cellular phone or smart phone coverage area.
— The computer must be connected to
the internet.
— A cellular phone must be used to
communicate with the vehicle.
— A cellular phone capable of text
messaging must be used to receive
text message regarding vehicle
charge status.
. When the remote heater and air condi-
tioner is set, the system operates the
heater and air conditioner to adjust the
in-cabin temperature to a set temperature.
. When the charge connector is discon-
nected from the vehicle, the heater and
air conditioner operates using vehicle
Li-ion battery electric power.
. If the remote heater and air conditioner
function and Li-ion battery charging are
performed at the same time, Li-ion
battery charging will take longer than
usual due to the power used to heat or
cool the vehicle.
IT-4 LEAF Navigation System overview
. Certain remote functions require a
compatible smart phone, which is not
included with vehicle.
. CARWINGS
tures are included through a subscription service which requires owner
consent to activate. The subscription
must be active to use these features.
. CARWINGS
received at a verified e-mail address or
by SMS/text messaging-enabled cellular phone.
. Standard text rates and/or data usage
may apply depending on your carrier.
TM
information system fea-
TM
communications may be
Remote functions
When an Internet connection is available, you
can use a personal computer or an Internetenabled smart phone to check the battery status
and operate battery charging or the heater/air
conditioner remotely from another location.
Battery status check:
The status of the battery can be checked using
your personal computer or a internet enabled
smart phone even if you are not in the vehicle.
You may also choose to have SMS messages
(text messages) sent to a cellular phone.
Unplugged status, Charge status:
By registering frequently used charging stations,
notifications can be sent to your personal
computer or cellular phone email address to
inform you when the charging connector is
disconnected or charging is stopped midcharge at those locations.
Remote charge, Remote climate control:
Remote activation of battery charging or climate
control can be set using your personal computer
or a internet enabled smart phone.
Li-ion battery warmer status:
When ambient temperature is low, the Li-ion
battery warmer operates automatically.
Notifications will be sent to the e-mail address
you have registered on the NISSAN CARWINGS Data Center the following conditions in
order to remind you to connect the charging
connector.
. Approximately 5 minutes after the Li-ion
battery warmer starts operating while the
power switch is in the OFF position and the
charging cable is not connected to the
vehicle.
. Approximately 5 minutes after the Li-ion
battery warmer stops operating due to low
remaining Li-ion battery power while the
power switch is in the OFF position and the
charging cable is not connected to the
vehicle.
NOTE:
. The remaining Li-ion battery power
lowers gradually while the Li-ion battery warmer is operating without connecting the charging connector.
. When the remaining Li-ion battery
power lowers, the Li-ion battery warmer stops operating. When this occurs,
the Li-ion battery temperature lowers
gradually, and as a result the EV
system may be disabled.
Navigation Telematics (CARWINGS
When the system connects to the NISSAN
CARWINGS Data Center, charging station
information will be automatically updated and
you can receive useful information for driving
your vehicle.
Automatic update of charging stations:
The information for the charging stations that is
recorded in the map data is automatically
updated.
All Information Feeds:
Convenient information for driving such as
weather and traffic information, ECO information
shared with the LEAF users, etc. is provided.
Favorites:
When the information of an Internet site is
selected and it is stored in the page that is
specially established in the NISSAN Owner’s
TM
service)
LEAF Navigation System overview IT-5
Portal Website, the information is converted into
an appropriate format via the NISSAN CARWINGS Data Center and provided for use in the
vehicle. The content of the information is
automatically read out. For the registration
method of information data, visit the NISSAN
Owner’s Portal Website.
IT-6 LEAF Navigation System overview
1 Getting Started
Control buttons and functions................................................ 1-2
Control panel ........................................................................ 1-2
Steering wheel switches.................................................... 1-4
USB connector and Auxiliary input jack ........................ 1-4
Start-up screen .......................................................................... 1-5
Functions disabled while driving............................................ 1-6
Basic operation .......................................................................... 1-7
Selecting item ....................................................................... 1-7
Adjusting volume and others ............................................ 1-7
Scrolling message or list ................................................... 1-7
How to input letters and numbers .................................. 1-7
Viewing display screens........................................................... 1-9
Map screen............................................................................ 1-9
Zero Emission menu screen ............................................. 1-9
Menu screen ....................................................................... 1-9
Status screen................................................................... 1-10
FM·AM radio screen....................................................... 1-10
SiriusXM Satellite Radio screen ................................. 1-10
CD·AUX screen ............................................................... 1-10
Items to be set initially.......................................................... 1-11
Subscription to CARWINGS
Inputting user ID and password ................................. 1-11
Storing home location ................................................... 1-12
Connecting cellular phone ........................................... 1-13
Display adjustment ......................................................... 1-14
Volume settings............................................................... 1-16
Clock settings.................................................................. 1-16
Language and unit settings.......................................... 1-17
TM
service.................... 1-11
CONTROL BUTTONS AND
FUNCTIONS
1-2 Getting Started
CONTROL PANEL
1
FM·AM button:
*
Push to switch between the FM the AM radio
bands.
2
XM button:
*
Push to switch to an SiriusXM satellite radio
band.
3
CD·AUX button:
*
Push to switch between USB memory/iPod
player/CD/Bluetooth®streaming audio/AUX/
®
Pandora
4
VOL (Volume control) button:
*
Push to adjust the volume of the audio system.
5
*
Push to turn the audio system on or off.
6
Monitor:
*
7
MAP button/VOICE button:
*
Push to display the current location map screen.
Push and hold to repeat voice guidance.
8
MENU button:
*
Push to display the setting menu (destination,
route, information, settings, phone and CARWINGS
9
STATUS button:
*
Push to display the current status of the climate
control, radio, audio, vehicle information (driving
range and average energy economy) and navigation systems.
10
TUNE SEEK CH button:
*
Push to select a track/station. Push and hold to
search for a track/station automatically or to fast-
(if so equipped) screens.
(Audio system ON·OFF) button:
TM
) screen.
®
forward/rewind when listening to music.
11
*
*
*
(Zero Emission menu) button:
Push to display the menu screen where several
useful functions for electric vehicle driving are
available.
12
13
(Day/Night) button:
Push to switch between the day screen (bright)
and the night screen (dark). Push and hold to turn
off the display. Push again to turn on the display.
CAMERA button (if so equipped):
Push to switch to the Around View Monitor
screen.
“9. Monitor system”
14
OPEN/TILT button:
*
Push to open the monitor to access the CD slot
and the SD card slot. Push and hold to adjust the
monitor angle.
15
CD slot
*
16
*
17
*
(CD eject) button:
Push to eject a CD.
SD card slot:
Remove the cover to access the SD card slot.
Insert an SD card. Push the inserted SD card in
and release it to eject the SD card from the slot.
An SD card containing map data is provided with
the vehicle and is inserted in the right hand slot of
the system. To transfer the data, insert an SD
card in the left side slot.
“Transferring information to/from address
book” (page 3-70)
NOTE:
Do not remove the SD card containing map
data that is inserted in the right-hand slot.
When this SD card containing map data is
removed the navigation system will not
operate. If the SD card containing map
data is accidentally removed, after reinserting the SD card containing map data
into the right-hand slot, place the power
switch in the OFF position and then place
back in the ON position again.
INFO:
. Never remove the SD card while the monitor
is opening or closing or the angle of the
monitor is being adjusted. Doing so may
damage or deform the SD card.
. Never insert foreign objects such as coins
into the SD card slot. Doing so may result in
a malfunction of the device.
. Be careful not to drop the cover for the SD
card slot into the gap of the monitor. Doing
so may result in a malfunction of the device.
. Do not apply overload to the SD card when
inserting it to the slot. Doing so may result in
a malfunction of the device.
. The SD card may be hot when it is removed
from the device. This does not indicate a
malfunction.
Opening/Closing monitor
Open the monitor to insert/eject a CD or an SD
card.
CAUTION
. Be careful not to pinch your hand or
fingers while the monitor is moving
to its open or closed position. This
may cause injury to your hand or
fingers.
. Do not force the monitor to open or
close. Doing so may damage the
monitor.
Getting Started 1-3
When the OPEN/TILT button is pushed while
the monitor is closed, the monitor will open.
When the OPEN/TILT button is pushed while
the monitor is open, the monitor will close.
Adjusting monitor angle
STEERING WHEEL SWITCHES
*
*
5
6
(TALK) button:
Push to enter the voice recognition mode.
(CANCEL) button:
Push to cancel the voice command.
USB CONNECTOR AND AUXILIARY
INPUT JACK
The angle of the monitor can be adjusted to
select from 3 different preset angles. Once the
angle of the monitor is selected and stored in the
system, the selected angle is always set after
performing the open/close operation of the
monitor.
Push and hold the OPEN/TILT button until a
chime sounds. When the button is released, the
next preset angle will be selected. Continue this
procedure until the preferred angle is obtained.
*
*
*
*
1
2
3
4
(Driving range) button:
Push to display the driving range screen. Push
again to return to the previous screen.
“Displaying estimated driving range”
(page 2-3)
SOURCE button:
Push to change the mode in sequence of AM,
FM, XM, CD, USB memory, iPod
®
Pandora
streaming audio. If a mode is not ready to
function, it will be skipped. Push up or down to
select a radio station or a track.
Push to display the hands-free phone operation
screen.
- + (Volume control) button:
Allows you to adjust the volume.
(if so equipped) and Bluetooth
(PHONE) button:
1-4 Getting Started
®
player,
1
USB connector:
*
®
Connect to play an iPod
memory.
2
Auxiliary input jack:
*
Connect an audio player that accepts a 1/4 inch
(3.5 mm) TRS connector (such as an MP3 player
etc.) to play back music.
®
, an iPhone®or a USB
START-UP SCREEN
1. The system starts when the power switch is
pushed to the "ACC" or "ON" position. The
start-up screen is displayed.
2. Check the message that is displayed on the
screen and touch [OK].
Subject to the selected items, a different
indication may be displayed at subsequent
times. The set-up screen will be displayed
again after a given period of time.
INFO:
. The setting can be changed from [Vehicle
Data Transmission Setting] in CAR-
TM
WINGS
setting.
“CARWINGSTMsettings” (page 5-12)
. If you do not select [OK], vehicle data will
not be stored in the NISSAN CARWINGS
Data Center and you will not be able to
check it via the NISSAN Owner’s Portal
Website.
Also, if [Share Vehicle Information] is set to
OFF, vehicle data will not be uploaded.
Make sure that this setting is ON.
When [Service Reminder] is set to ON,
communication with the NISSAN CARWINGS Data Center will be performed once
daily. NISSAN recommends that you set
[Service Reminder] to ON.
“CARWINGSTMsettings” (page 5-12)
NOTE:
. Navigation functions, audio, hands-free
phone, vehicle information display, etc.
can still be operated even if [Decline] is
touched. However, if the CARWINGS
TM
function is selected, the start-up screen
will be displayed again.
. If other buttons such as the MAP
button or MENU button etc., are
pressed without [OK] or [Decline] being
touched, the corresponding screen will
be displayed and operations can be
performed. However, if the CAR-
TM
WINGS
function is selected, the
start-up screen will be displayed again.
Getting Started 1-5
FUNCTIONS DISABLED WHILE
DRIVING
To ensure safe driving, some functions cannot
be operated or have limited operation while the
vehicle driving speed is above 5 mph (8 km/h).
The on-screen text and keys for these restricted
functions will be "grayed-out" or muted and
cannot be selected while driving. In some cases,
a screen message will appear indicating a
restricted function.
Restricted functions while driving include:
. Character (letter and number) input screen
during destination entry (street address,
point of interest, phone number, freeway
entrance/exit, intersection, city center)
. Setting route condition after setting destina-
tion
. Scrolling and viewing of certain navigation
list
. Displaying detail information and touching
item on the information screen
. Adding/editing home location
. Adding/editing address book entries
. Editing current route
. Storing current position, information, desti-
nation
. Displaying charging station information
. Registering cellular phones
1-6 Getting Started
. Making a call by dial number and handset
phonebook
. Setting phone, CARWINGS
These functions will become available again
when the vehicle speed is reduced to 5 mph (8
km/h).
Destination functions available while driving
include:
. Home
. Nearby Charging Stations
. Address Book
. Previous Destinations
. Nearby Points of Interest
. Stored Routes
. Map input
tooth
®
functions
TM
and Blue-
BASIC OPERATION
Examples of operations performed using the
touch panel operation are described here.
SELECTING ITEM
When the item is touched, the next screen is
displayed.
ADJUSTING VOLUME AND OTHERS
Touch [+] or [-] located on the right and left of
the bar graph to perform the adjustment.
SCROLLING MESSAGE or LIST
Touch [ ]or[ ] to scroll the message or list.
Touch [
]or[ ] to skip to the next page.
HOW TO INPUT LETTERS AND
NUMBERS
Character (letters and numbers) input screen
Alphanumeric characters are entered to set a
destination, search for a facility, edit stored
locations, etc.
Getting Started 1-7
1. Touch a character on the displayed key-
board. The selected character is entered.
INFO:
.
The list screen appears automatically
when text has been entered and the
matching list items have been narrowed
down to a number that will fit on the
screen.
.
Symbol keys are displayed by touching
[Symbols]. Alphabet keys are displayed
by touching [A-Z].
1. Touch a number on the displayed keyboard.
The selected number is entered.
2. Touch [Delete] to delete the last character
entered.
Touch and hold [Delete] to delete all the
characters entered.
Touch [Space] to enter a space.
3. After finishing the entry, touch [List].
1-8 Getting Started
Perform the following procedure to enter a
number.
INFO:
Only the locations included in the map data
database can be searched for by a phone
number.
Phone number input screen
2. Touch [Delete] to delete the last number
entered.
Touch and hold [Delete] to delete all the
numbers entered.
3. After finishing the entry, touch [List].
VIEWING DISPLAY SCREENS
This system allows you to set various functions
and check information on the screen that is
displayed by pushing each button located on the
control panel.
MAP SCREEN
When the MAP button is pushed, a map screen
where the vehicle position is centered is
displayed.
When the map is moved or the MAP button is
pushed while the menu screen is displayed, a
map indicating the current vehicle position is
displayed. Various useful information for driving
is shown on the map screen.
“Map settings” (page 3-3)
ZERO EMISSION MENU SCREEN
Push the (Zero Emission menu) button to
display the menu screen where several useful
functions for electric vehicle driving can be set.
Select a preferred menu and touch an item to be
set.
“2. Unique EV functions”
MENU SCREEN
When the MENU button is pushed, the menu
screen is displayed. Select a preferred menu
and touch an item to be set.
Available options:
. [Destination]:
There are several methods you can use to
set your destination. Understand the advantages of each method and select the best
method for finding and setting your destination.
“Setting destination” (page 3-17)
. [Route]:
During route guidance, you can modify the
route conditions or confirm the route information. Set the appropriate route condition according to your purpose.
“Route guidance” (page 3-39)
. [Info]:
This screen allows you to set or view various
information that is helpful for using the
vehicle safely and comfortably.
“6. Viewing technical information”
. [Settings]:
The system can be customized to make it
easier for you to use.
. [Phone]:
Useful functions for the Bluetooth
Free Phone System can be set.
“Phone settings” (page 7-8)
Getting Started 1-9
®
Hands-
. [CARWINGS]:
Information feeds are displayed and settings
for CARWINGS
“5. CARWINGSTM”
TM
can be performed.
FM·AM RADIO SCREEN
STATUS SCREEN
Push the FM·AM button to turn on the radio and
display the radio screen. Push the switch to
toggle the radio mode: AM?FM1?FM2.
“FM-AM-SATradio operation” (page 4-12)
Push the STATUS button to display the current
status of the navigation system.
Each time the STATUS button is pushed,
displayed information is switched in the order
of climate control, vehicle information and
navigation route information.
There are different status screens displayed
depending on various factors, such as the
currently active mode, whether a destination
has been set or not, etc.
SIRIUSXM SATELLITE RADIO
SCREEN
Push the XM button to turn on the satellite radio
and display the SiriusXM Satellite Radio screen.
Push the switch to toggle the radio mode:
XM1?XM2?XM3.
1-10 Getting Started
“FM-AM-SATradio operation” (page 4-12)
CD·AUX SCREEN
Push the CD·AUX button to turn on the audio
system and display the audio screen. Push the
CD·AUX button to toggle the mode: iPod
*1
player
/USB memory/Pandora
®
Bluetooth
*1 Screen only displays when a device capable of
*2 The Pandora
streaming audio*1?AUX.
playback is connected.
“Compact Disc (CD) player operation”
(page 4-14)
“iPod®player operation” (page 4-16)
“USB memory operation” (page 4-19)
“Bluetooth®streaming audio” (page 4-11)
“Auxiliary input jack” (page 4-23)
“Pandora®operation” (page 4-17)
®
is only available in U.S.
®*1*2
?CD?
Loading...