Quick reference for SURDIAL
STEP 1 |
1, Power switch behind of a machine should be ON. |
2, Water supply and drain line are not kinking and tangled. |
|
Confirm |
3, Machine should be water rinsed at least 10minutes |
right before you start to use a machine for a treatment. |
|
|
|
STEP 2 |
1, Confirm temperature and conductivity settings. |
2, Check a solution setting in a machine, BC1,2 or AC1? |
|
Ready |
|
3, Connect to a solution tank A and B.
4, Attache a Bloodline, a Dialyzer and a Syringe. Also syringe pump setting should be confirmed.
STEP 3 |
1, Press a "PREP" button to start a preparation mode. |
machine will start to make a dialysis fluid. |
|
Preparation |
And "PREP" and "BYPASS" button will be blinking. |
|
|
2, "PREP" will be light on and "BYPASS" will be off when |
|
preparation is completed. |
|
|
STEP 4 |
1, Connect to saline bag and prime up both bloodline and a |
dialyzer by using blood pump while above preparation. |
|
Priming |
|