Ninja BL770 Owner's Manual

BL770 series

®

OWNER’S GUIDE

Mega Kitchen System

®

www.ninjakitchen.com

1 877 646-5288

IMPORTANT SAFETY INSTRUCTIONS

7 To protect against electrical shock, do not

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:

READ ALL INSTRUCTIONS BEFORE
USING YOUR NINJA® MEGA KITCHEN
SYSTEM®.

POLARIZED PLUG

WARNING: To reduce the risk of

electric shock, this appliance has a polarized
plug (one blade is wider than the other). This
plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. DO NOT modify the plug in

any way.

WARNING: Extension cords are

not recommended for use with this product.

THIS BOOK COVERS MODEL NUMBERS:

BL770
BL770A
BL770W

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.
Power: 1500 Watts

Pitcher Capacity: 72 oz. (9 cups, 2.15 L)
MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L)

Bowl Capacity: 64 oz. (8 cups, 1.8 L)

Nutri Ninja® Cup Capacity: 16 oz. (2 cups, 470ml)

1 2

WARNING: TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK OR INJURY:

1 WARNING: Remove utensils prior to

processing. Failure to remove may cause
the jar to be damaged or to shatter which
may cause personal injury.

2 WARNING: Stacked Blade Assembly is

sharp, not locked in place and removable,
handle with care. When handling the
Stacked Blade Assembly, always hold it by
the shaft. Failure to do so will result in a
risk of laceration.

3 WARNING: Stacked Blade Assembly is

sharp and not locked in place. If using the
pour spout, ensure the lid is fully locked
onto the pitcher. If pouring with the lid
removed, carefully remove the Stacked
Blade Assembly first, holding it by the shaft.
Failure to do so will result in a risk of
laceration.

4 WARNING: Chopping Blade Assembly is

sharp and not locked in place. Before
emptying contents carefully remove lid and
Chopping Blade Assembly, holding it by the
shaft. Failure to do so will result in a risk of
laceration.

4 CAUTION: Do not blend hot liquids, doing

so may cause excessive pressure build-up,
resulting in risk of the user being burned.

5 CAUTION: We do not recommend

grinding in any of our Nutri Ninja

6 CAUTION: Remove the Nutri Ninja Blade

Assembly from the cup upon completion of
blending. Some ingredients have the
potential to expand after blending resulting
in excessive pressure buildup that can pose
a risk of injury.

®

cups.

submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.

8 DO NOT allow the appliance to be used by

children. Close attention is necessary when used
near children. This is not a toy.

9 Never leave an appliance unattended when

inuse.

10 Appliance accessories are not intended to be

used in the microwave as it may result in damage
to the accessories.

11 Turn the appliance Off and remove the power

cord from the electrical outlet when not in use,
before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.

12 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.

13 DO NOT operate any appliance with a damaged

cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner.
This appliance has no serviceable parts. Return
the appliance to SharkNinja Operating LLC for
examination, repair or adjustment.

14 DO NOT let the power cord hang over the edge of

table or counter or touch hot surfaces such as the

stove.
15 Always use appliance on a dry, level surface.
16 Keep hands, hair, clothing, as well as utensils

out of container while processing to reduce the

risk of severe injury to persons or damage to the

appliance. A scraper may be used but only when

the appliance is not running.
17 Avoid contact with moving parts.
18 DO NOT attempt to sharpen blades.
19 DO NOT use the appliance if blade assemblies

are bent or damaged.

20 To reduce risk of injury, never place the blade

assemblies on the base without the pitcher or
Nutri Ninja® cup properly attached.

21 DO NOT operate this appliance on or near any

hot surfaces (such as gas or electric burner or in
a heated oven).

22 The use of attachments or accessories

including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.

23 DO NOT remove the container from the motor

base while the appliance is in operation.

24 To reduce the risk of injury, NEVER operate the

appliance without the lid in place; DO NOT try
to defeat the interlock mechanism; make sure
that the attachment is properly installed before
operating the appliance.

25 DO NOT expose containers to extreme

temperature changes.
26 DO NOT overfill.
27 DO NOT operate the appliance empty.
28 If the appliance overheats, a thermal switch will

become activated and shut off the motor. To

reset, unplug the appliance and let it cool down

for approximately 15 minutes before using again.
29 THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use this

appliance for anything other than its intended

use. Do not use outdoors.
30 The maximum rating is based on the Stacked

Blade Assembly (pitcher) that drives the greatest

power and other recommended attachments may

draw significantly less power or current.

SAVE THESE

INSTRUCTIONS

www.ninjakitchen.com1-877-646-5288

Thank you for
purchasing
the Ninja®
Mega Kitchen
System®.

Contents

Getting to Know Your Ninja® Mega Kitchen System® ....................................................4

Before First Use ........................................................................................................5

Assembly and Use for the Blender Pitcher ..................................................................6

Assembly and Use for the Nutri Ninja® Cup .................................................................8

Assembly and Use for the Food Processor Bowl ..........................................................9

Speed Setting & Uses ..............................................................................................11

Getting To Know Your Ninja® Mega Kitchen System

a

b

d

c

®

Care & Maintenance ...............................................................................................12

Troubleshooting Guide .............................................................................................13

Replacement Parts ..................................................................................................13

Warranty & Registration ...........................................................................................14

FEATURES:

• Patented Ninja® Technology

• Extra Large, 72 oz. Blender Pitcher (MAX Liquid Capacity: 64 oz.) - BPA Free

• 64 oz. Food Processor Bowl with Drizzle Hole Lid - BPA Free

• Nutri Ninja® Cups - BPA Free

• Lock–In Lid, Featuring Pour Spout

• Easy to Clean Electronic Control Panel

• Sturdy, Non-Slip Base

h

k

a 16 oz. Nutri Ninja® Cup (x2)

b To-Go Lid (x2)

c Nutri Ninja Blade Assembly

NOTE: Blade Assemblies are not interchangeable.

d 64 oz. Food Processor Bowl

e Bowl Lid with Locking Handle

f Dough Blade Assembly (bowl)

g Chopping Blade Assembly (bowl)

f

e

j

i

h 72 oz. Blender Pitcher

i Pitcher Lid with Locking Handle

j Stacked Blade Assembly (pitcher)

k Motor Base

l Power Cord (not shown)

g

3 4

www.ninjakitchen.com1-877-646-5288

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:

IMPORTANT: Make sure that the motor base

is plugged in for use.

IMPORTANT: Never add ingredients into the

container before placing the attachment in
first.

IMPORTANT: Blade assemblies are not

interchangeable.

IMPORTANT: DO NOT attempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empt y.

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it
may result in damage to the accessories.

WARNING: Stacked Blade
Assembly is sharp and not
locked in place. If using the
pour spout, ensure the lid is
fully locked onto the blender
pitcher. Failure to do so will
result in a risk of laceration.

WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully remove
the Stacked Blade Assembly
first, holding it by the shaft.
Failure to do so will result in
a risk of laceration.

WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.

CAUTION: Do not immerse the motor base into

water or any other liquid.

1 Remove all packaging material and labels from the

appliance. Separate/remove all parts from each other.

2 Wash the lids, pitcher, bowl, Nutri Ninja cups and blade

assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.

WARNING: Handle the Stacked Blade Assembly,

Chopping Blade Assembly and Nutri Ninja Blade
Assembly with care when washing, as the blades
are sharp.

3 Handle blade assemblies with care to avoid contact

with sharp edges. Rinse and air dry thoroughly.

4 The pitcher, bowl, Nutri Ninja cups, lids, Stacked

Blade Assembly, Chopping Blade Assembly and
Nutri Ninja Blade Assembly are all dishwasher safe.

It is recommended that the lids and blade assemblies
be placed on the top rack. Ensure the blade assembly is
removed from the cup, bowl or pitcher before placing in
the dishwasher.

5 Wipe the motor base clean with a damp cloth.

Assembly and Use for the Blender Pitcher

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

Fig. 3a

OR

Fig. 2

It’s best to add the liquid ingredients first and then the dry ingredients.

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface

such as a counter or table top.

3 Align and lower the Pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

4 Rotate the blender pitcher clockwise until it clicks in

place. As the pitcher rotates, it will lower and the safety

tabs on the bottom of the pitcher will slide under the

safety tabs on the top of the motor base. (Fig. 2)

5 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

6 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the Stacked Blade Assembly is seated

properly and is standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will fit loosely on

the drive gear.

Fig. 3bFig. 1

7 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line
on the side of the pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 ounces) on the pitcher.

8 Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power

button ( ) will flash and the motor will not work
if the pitcher and lid are not installed correctly.
When the pitcher and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.

9 Holding the lid by the handle in the upright position,

place it on top of the pitcher aligning the arrow ( )
located on the lid with the arrow ( ) located on the
pitcher’s handle. (Fig. 5) Press the handle down until
you hear a click.

Fig. 4 Fig. 5

5 6

www.ninjakitchen.com1-877-646-5288

Assembly and Use for the Blender Pitcher - cont.

USE

REMOVAL

Assembly and Use for the Nutri Ninja® Cup

WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be

damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some

ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose

a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY USE REMOVAL

Fig. 6 Fig. 8

10 Review ALL warning and caution statements before

proceeding.

11 Select the speed that best suits your needs. (Fig. 6)

NOTE: Pulse ingredients for even chopping by pressing

down in short intervals.

12 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and
wait for the attachment to stop turning. (Fig. 7)

13 To remove the lid, press the release button on the lid,

pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counter clockwise and then lift off the
base. (Fig. 7, Fig. 8)

WARNING: Never insert your hands in the pitcher

as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.

Fig. 7

14 Open the pour spout cap and use the spout to empty

liquid contents.

15 For thicker consistencies, first remove the lid by

pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher.

16 Make sure that the unit is unplugged when not in use.

17 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 9)

Fig. 9

Fig. 2Fig. 1

For best results, use short “PULSES”... Practice makes perfect!!

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top.

3 Add ingredients to the Nutri Ninja® cup.

4 Place the Nutri Ninja Blade Assembly onto the cup and

screw it tightly until you have a good seal. (Fig. 1)

5 Turn the Nutri Ninja® cup upside down and place it

onto the motor base, aligning the tabs on the cup with

the motor base. Turn the Nutri Ninja® cup clockwise to

lock into place. You will hear a click when the lock is

engaged. (Fig. 2) Turn the power button on, the single

serve button will illuminate.

6 Press down on the Single Serve button in short

intervals to activate. (Fig. 3)

7 Once you have reached your desired consistency,

turn the power button off. Turn the Nutri Ninja® cup

counter-clockwise and pull straight up to remove.

(Fig. 4, Fig. 5)

Fig. 3 Fig. 4 Fig. 5

NOTE: Do not overfill! To avoid spilling, do not add

ingredients past the “Max” fill line.

8 Turn the cup upright and remove the Nutri Ninja Blade

Assembly by twisting the blade assembly counter­clockwise.

9 Place the To-Go drinking lid onto the Nutri Ninja® cup,

twist to seal and enjoy!

10 Make sure that the motor base is unplugged when not

in use.

11 To release the motor base from

the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you. (Fig. 6)

NOTE: To order additional Nutri

Ninja® Cups, please visit our website:
www.ninjakitchen.com or feel free to contact
customer service: 1-877-646-5288.

Fig. 6

7 8

www.ninjakitchen.com1-877-646-5288

Assembly and Use for the Food Processor Bowl

WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully

remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do so will result in a risk of
laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to

shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential

to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

USE

CHOPPING BLADE

ASSEMBLY

REMOVAL

USE

DOUGH BLADE

ASSEMBLY

OR

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top.

3 Align and lower the Bowl onto the motor base. (Fig. 1)

Handle should be aligned slightly to the right of the

“LOCK” symbol on the motor base.

4 Rotate the bowl clockwise to lock into place. You will

hear a click when the lock is engaged. (Fig. 2)

5 The bowl can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

6 Holding the desired Blade Assembly by the top of the

shaft, place it onto the drive gear inside the bowl.

Ensure that the Blade Assembly is seated properly and

is standing upright. (Fig. 4)

NOTE: The Blade Assembly will fit loosely on the drive

gear.

7 Add the ingredients to the bowl, making sure that they

do not exceed the highest measured marking line on

the side of the bowl.

Fig. 3a

Fig. 3bFig. 2

8 Holding the lid by the handle in the upright position,

place it on top of the bowl aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl’s handle. (Fig. 5) Press the handle down until you
hear a click.

NOTE: The 64 oz. bowl is not intended for

blending drinks. Do not overfill.

NOTE: To add liquids during processing,

open the drizzle hole on the top of the
lid and pour the liquid slowly into the
mixture.

9 Plug the power cord into the electrical

outlet and press the power button ( ).

IMPORTANT: As a safety feature, the power

button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power but ton ( ) will be solid, indicating that the
appliance is ready for use.

Fig. 4 Fig. 5Fig. 1

Fig. 1 Fig. 2 Fig. 3 Fig. 4

USING THE CHOPPING BLADE ASSEMBLY

1 Review warning and caution statements at the top of

page 9 before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top.

3 Secure the bowl onto the motor base.

4 Holding the Chopping Blade Assembly by the shaft,

place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)

5 Add the ingredients and secure the bowl lid onto the

bowl. (Fig. 1)

6 Plug the power cord into the electrical outlet and press

on the power button ( ). (Fig. 2) Select the speed
that best suits your needs. Pulse ingredients for even
chopping by pressing down in short intervals.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

7 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and
wait for the Chopping Blade Assembly to stop turning.

8 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

9 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

10 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.

(Fig. 4)

Fig. 5

USING THE DOUGH BLADE ASSEMBLY

IMPORTANT: Use only the “DOUGH” button when

using this attachment.

1 Review warning and caution statements at the top of

page 9 before proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or table top.

3 Secure the bowl onto the motor base.

4 Holding the Dough Blade Assembly by the shaft, place

it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)

5 Add the ingredients and secure the bowl lid onto the

bowl. (Fig. 5)

NOTE: For best results add wet ingredients first and

then add dry ingredients.

6 Plug the power cord into the electrical outlet and press

on the power button ( ). (Fig. 2)

7 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

8 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

9 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)

9 10

www.ninjakitchen.com1-877-646-5288

Speed Setting & Uses

Care & Maintenance

FUNCTION CONTAINER ATTACHMENT

Nutri Ninja® Blending Nutri Ninja® Cup

Mincing Nutri Ninja® Cup

Kneading Bowl Dough Blade Assembly 1

Dough Mixing Bowl Dough Blade Assembly 1 Cookie dough

Processing

Emulsifying Bowl

Grinding Bowl

Grating

Chopping

Mixing Bowl Dough Blade Assembly 1

Ice Crushing

Pitcher/Bowl

Nutri Ninja® Cup

Bowl

Nutri Ninja® Cup

Bowl

Nutri Ninja® Cup

Pitcher

Pitcher

Nutri Ninja® Cup

Nutri Ninja Blade

Assembly

Nutri Ninja Blade

Assembly

Stacked Blade Assembly

Nutri Ninja Blade

Assembly

Chopping Blade

Assembly

Chopping Blade

Assembly

Chopping Blade

Assembly

Nutri Ninja Blade

Assembly

Chopping Blade

Assembly

Nutri Ninja Blade

Assembly

Stacked Blade Assembly

Stacked Blade Assembly

Nutri Ninja Blade

Assembly

SPEED

BUTTON

Single Serve

Single Serve

2

Pulse

Single Serve

2

2 Meat

3 or Pulse

Single Serve

Pulse

Single Serve

3

3

Single Serve

TYPE OF FOOD

Smoothies

Frappes

Milk Shakes

Bread dough

Pie dough

Pizza dough

Pretzel dough

Stewed fruits

Apple sauce

Spreads

Soups*

Baby food

Salad Dressings

Sauces*

Grated cheese
Bread crumbs

Spices

Vegetables

Light cake mixes

Batters

Onion
Garlic
Herbs

Pâtés

Dips

Dips

Salsa

Nuts

Ice

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting
or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

2 Hand Washing: Wash the lids, pitcher, bowl, Nutri

Ninja® cup and blade assemblies in warm, soapy
water. When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades. Handle blade assemblies with care
to avoid contact with sharp edges. Rinse and air dry
thoroughly.

Dishwasher: The containers, lids, blade assemblies

and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.

WARNING: Handle the Stacked Blade Assembly,

Chopping Blade Assembly and Nutri Ninja Blade
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.

3 Wipe the motor base clean with a damp cloth

Please call customer service if any servicing needs to

be performed on the appliance at 1-877-646-5288.

.

HOW TO STORE

1 Store the Ninja® Mega Kitchen System® upright

blade assembly inside the corresponding container
with the lid secured on top. Do not place anything on
top. Store the rest of the attachments in a safe place
where they will not be damaged and won’t cause harm.
Loosely wrap the power cord around the motor base.

with the

RESETTING THE MOTOR THERMOSTAT

The Ninja® Mega Kitchen System® features a unique
safety system which prevents damage to the unit’s motor
and drive system should you inadvertently overload your
appliance. If the appliance is being overloaded, the

motor will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,

follow the resetting procedure below:

1 Unplug the appliance from the electrical outlet.

2 Remove and empty the container and ensure that no

food is jamming the Blade Assembly.

3 Allow the appliance to cool for approximately 15

minutes.

4 Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

5 Proceed to use the appliance as before making sure not

to exceed the recommended maximum capacities.

Pureeing

* When blending sauces and soups, make sure they’re cooled to room temperature first - Ninja® containers are not intended for

hot blending.

11 12

Pitcher

Nutri Ninja® Cup

Stacked Blade Assembly

Nutri Ninja Blade

Assembly

3

Single Serve

Smoothies

Smooth soups

Milkshakes

www.ninjakitchen.com1-877-646-5288

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.

Food is Unevenly Chopped.

Food is Chopped Too Fine or is
Too Watery.

Food Collects On Lid or On the
Sides of the Container.

You Cannot Achieve Snow
From Solid Ice.

Motor Base Won’t Stick to
Counter or Table Top.

Make sure the container is securely locked on the motor base.

Make sure the lid is securely on the container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button ( ) to turn “On”.

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overheated or overloaded. Unplug and wait approximately 15
minutes before usingagain.

Check to make sure the unit is not overloaded.

Either you are chopping too much food at one time, or the pieces are not of even
size and processing smaller amounts per batch.

The food has been over processed. Use pulse button for controlled processing.

The mixture is too thick. Add more liquid.

Do not use ice that has been sitting out or has started to melt. Use ice straight
from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood,
tile and non-polished finishes.

DO NOT attempt to use appliance when the motor base is stuck to a surface that
is not secure, (cutting board, platter, plates, etc.).

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)

year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.

The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.

If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.

This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and

to attach tag to item before packing with your name, complete address and phone number with a note giving

purchase information, model number and what you believe is the problem with the item. We recommend you insure

the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package

“ATTENTION CUSTOMER SERVICE”.

PRODUCT REGISTRATION

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.

13 14

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

www.ninjakitchen.com1-877-646-5288

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7

1-877-646-5288
www.ninjakitchen.com

Mega Kitchen System, Ninja and Nutri Ninja, are registered trademarks of

SharkNinja Operating LLC.

Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.

For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents.

© 2016 SharkNinja Operating LLC
BL770_series_30_IB_ENG_160202_9
PRINTED IN CHINA