Welcome to the Nutri Ninja® with Auto-iQ® Pro Complete all-purpose,
customisable, everyday kitchen assistant. The Nutri Ninja with Auto-iQ Pro
Complete features pre-programmed settings that take the guesswork out of drink
and meal making. These programs are timed to deliver consistent, delicious
results that finish on their own so all you have to do is press a button and enjoy.
REGISTER YOUR PURCHASE:
www.ninjakitchen.eu
0800 862 0453
RECORD THIS INFORMATION:
Model Number: ���������������������������������������������
Select accessories are included. Additional accessories are available for purchase at www.ninjakitchen.eu. For a list of what is included with this model, refer to the top of the box or online.
If you should have a question about your Nutri Ninja with Auto-iQ Pro Complete, please
call the Ninja Customer service line at 0800 862 0453.
This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE).
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To
return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take
this product for environmental safe recycling.
This appliance complies with the European directives for electromagnetic compatibilit y (EMC) 2004/108/EC and its revisions, as well as Low Voltage
Directive (LVD) 20 06/95/EC and its revisions.
Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and materials. This guarantee does not affect
your statutory rights. If this product proves unsatisfactory please contact our customer service department on freephone 0800 862 0453 or by e-mail
ukservice@euro-pro.com.
2
www.ninjakitchen.eu
Page 3
®
READ ALL INSTRUCTIONS BEFORE USE
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always be
observed, including the following:
IMPORTANT: This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children shall not use or play with this appliance. Close supervision is necessary
to keep appliance and cord out of reach of children during use.
17 DO NOT use with damaged cord or plug.
18 DO NOT USE if the appliance is not working, after it has been dropped,
dropped into water, damaged or left outdoors.
19 NO SERVICEABLE PARTS. Incorrect re-assembly or repair can cause a risk of
electrical shock or injury to persons when the appliance is used.
20 DO NOT let the power cord hang over the edge of a table or counter or touch
hot surfaces such as the stove.
21 Always use the appliance on a dry, level surface. Make sure the suction-cup
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1 WARNING: Extension cords are not recommended for use with
this product.
2 WARNING: Never leave the appliance unattended while in use.
3 CAUTION: Blade assembly is sharp, handle with care. When handling
the blade assembly, always hold by the top of the blade assembly.
4 CAUTION: Do not blend hot liquids. Allow liquids and foods to
cool to room temperature before blending.
5 CAUTION: Do not blend dry ingredients unless pulsing for
short intervals per the instructions. Continuous blending dry
ingredients will overheat the blender.
6 CAUTION: Never attempt to remove the container while the
appliance is still running.
7 IMPORTANT: Never add ingredients to the containers before
inserting the blade assembly first.
8 IMPORTANT: Do not attempt to operate the container without the lid on.
9 IMPORTANT: Never run the appliance empty.
10 IMPORTANT: Make sure that the motor base is plugged in for use.
11 IMPORTANT: Make sure that the motor base is unplugged when not in use.
12 To protect against electrical shock, do not submerge the appliance or allow
the power cord to come into contact with water or any other liquid.
13 DO NOT allow young children to operate the appliance or use as a toy. Close
supervision is necessary when any appliance is used by or near children.
14 Never leave the appliance unattended when in use.
15 Turn the appliance off and remove the power cord from the electrical outlet
when not in use, before assembling or disassembling parts, accessing parts
that move while in use and before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the power cord.
16 DO NOT abuse the power cord. Never carry the appliance by the power cord or yank
it to disconnect from the electrical outlet; to unplug, grasp the plug, not the cord.
feet are wiped clean and no crumbs or residue are on the bottom of them.
22 Keep hands, hair, clothing, and utensils out of container while processing
to reduce the risk of severe injury to persons or damage to the appliance. A
scraper may be used ONLY when the appliance is not running.
23 Avoid contact with moving parts.
24 DO NOT attempt to sharpen blade assemblies.
25 DO NOT use the appliance if the blade assembly is bent or damaged.
26 To reduce risk of injury, never place the blade assembly on the motor base
without the proper container.
27 DO NOT operate this appliance on or near any hot surfaces (such as on a gas
or electric burner or in a heated oven).
28 The use of attachments or accessories (including canning jars), that are not
recommended or sold by the manufacturer may cause fire, electric shock, or
personal injury.
29 DO NOT remove the container from the motor base while the appliance is running.
30 To reduce the risk of injury, NEVER operate the appliance without the
blade assembly installed in a container. DO NOT try to defeat the interlock
mechanism; make sure the blade is properly installed before operating the
appliance.
31 DO NOT expose containers to extreme temperature changes.
32 DO NOT overfill.
33 Max ON time is 60 seconds under 1100W load. If the appliance overheats, a
thermal switch will become activated and shut off the motor. To reset, let it
cool down for approximately 30 minutes before using it again.
34 To reduce the risk of burns, always allow the appliance to cool before taking
off parts and before cleaning.
35 To avoid injury, never attempt to place the Pro Extractor Blade
without first assembling the blade assembly to the Nutri Ninja
36 THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended use. Do not use outdoors.
37 Check Stainless Steel cup for presence of foreign objects before using.
™
onto the motor base
®
Cup.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
08 00 8 62 04 53
3
Page 4
®
ACCESSORIES
Select accessories are
included. Others are
available for purchase at
www.ninjakitchen.eu
or by calling
0800 862 0453.
Nutri Ninja® Cups
WARNI NG: DO
NOT B LEND HO T
LIQUIDS
650 ml
Sip &
Seal® Lid
(2)
NOT E: Sip & Se al lid, Spou t lid and Pr o
Ex tracto r Blades can b e used wit h all
Ninj a Cups.
Double Wall
Stainless Steel
Ninja® Cup
WAR NING: DO
NOT B LEND HO T
LIQUIDS
650 ml
Pro Extractor
™
Blades
Multi-Serve Cup
WAR NING: DO
NOT B LEND HO T
LIQUIDS
1.4 L
Motor Base
START
PULSE
STOP
YES
BLEND
SMOOTH
EXTRACT
BOOST
NO
4
www.ninjakitchen.eu
Page 5
®
FEATURES:
• Nutrient & Vitamin Extraction
• 1100 Watt Motor
• User Interface:
Start/Stop
Start/Stop is a manual setting that runs at High speed for 60 seconds. This button can be pressed at any time if you wish to stop a program.
Smooth Boost™
SMOOTH BOOST YES/ NO is a special feature available when using the Auto-iQ® EXTRACT and Auto-iQ BLEND. This set ting can be used to control the consistency of your beverage
recipes. Selec t SMOOTH BOOST YES when smoother, creamier results are desired. This is the default program for both Auto-iQ EX TRACT and Auto-iQ BLEND programs. Select
SMOOT H BOOST NO when more of a textured consistenc y is desired.
Pulse
O ffers greater control to help prevent over-processing or over-blending. Simply hold down the but ton and our blades will run at a high speed for a quick burst of power to break through
ice or chop vegetables.
AUTO-IQ EX TRACT†
EXTRACT should be used w hen blending hard, leafy, or fibrous whole fruits and vegetables, including apples, kale, and celery. This optimised program allows you to blend fresh items
with their skins, seeds, and stems into nutrient ex tractions. Before using EX TRACT, select Smooth Boost YES or NO depending on your desired consistency.
AUTO-IQ BLEND
BLEND can be used to make a range of beverages that do not include hard or fibrous fresh ingredients, such as milkshakes, protein smoothies, soft fresh-fruit smoothies, and frozen
cocktails. Before using BLEND, select SMOOTH BOOST YES or NO depending on your desired consistency.
• Sip & Seal® lids for drinks on the go.
• Nutri Ninja® Cups and Sip & Seal lids, BPA free, and dishwashersafe.
NOTE: The Stainless Steel Ninja® Cup is NOT dishwasher safe.
• Cord Wrap located on back of the motor base.
Ice to Snow
Crushing Ice to Snow is easy – take ice cubes directly from your freezer, and put in a dr y Ninja® Cup – use the pulse feature in short quick bursts until it’s a snow like consistency.
†
†
Extract a drink containing vitamins and nutrients
from fruit s and vegetables.
08 00 8 62 04 53
5
Page 6
®
oror
START
PULSE
START
PULSE
STOP
YES
BLEND
SMOOTH
EXTRACT
BOOST
NO
A
B
START
PULSE
STOP
YES
BLEND
SMOOTH
EXTRACT
BOOST
NO
C
STOP
YES
BLEND
SMOOTH
EXTRACT
BOOST
NO
DE
START
PULSE
STOP
YES
BLEND
SMOOTH
EXTRACT
BOOST
NO
USEREMOVALASSEMBLY
For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.
CAUTION: Do not blend hot liquids. Allow the liquids or foods to cool to room temperature before blending.
CAUTION: Do not put hot liquids in the Stainless Steel 650 ml Nutri Ninja Cup before blending. Start with cool or room temperature liquid. Heated liquid can create
internal pressure in a sealed cup, which may erupt on opening and cause a burn injury.
IMPORTANT: Do not overfill. to avoid spilling, do not add ingredients past the “MAX” fill line.
IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1 second pulses. Do not overfill to avoid overheating the appliance.
Allow the appliance to cool after each use.
ASSEMBLY &
USE OF THE
NUTRI NINJA®
CUP
NOTE: Ninja® Auto-iQ®
Technology can sense
which container is on the
motor base. The function
lights will illuminate
depending on which
Nutri Ninja Cup is placed
on the motor base.
BEFORE FIRST USE:
• Remove all packaging material and labels from
the appliance.
• Wash the lids, cups, grinder, and blades in
warm, soapy water with a soft cloth.
• Rinse and dry thoroughly.
• NOTE: The Double Wall Stainless Steel Ninja
Cup is NOT dishwasher safe.
• Lids, cups and blades are all dishwasher safe. It
is recommended that the lids and at tachments
be placed on the top rack. Ensure that the Pro
Extractor Blades™ are removed from the cups
before placing in thedishwasher.
• Wipe the motor base clean with a damp cloth.
ASSEMBLY:
WA RNING: NEVER LEAVE THE APPLIANCE
UNAT TENDED WHILE IN USE.
CAUTION: USE CAUTION WHEN HANDLING
THE BL ADE ASSEMBLY AS IT IS VERY SHA RP.
IMPORTAN T: MAK E SURE THE MOTOR
BASE IS PLUGGED IN FOR USE .
1 Place the motor base on a clean, dry, level
surface such as a counter or tabletop. Press
down on the motor base to make sure the
suction cups adhere to the counter or tabletop.
2 Add ingredients to the Nutri Ninja cup.
3 Place the Pro Extractor Blades onto the cup and
tightly screw on clockwise (A) until you have a
good seal.
4 Turn the Nutri Ninja cup upside down and place
it onto the motor base (B), aligning the tabs on
the cup with the motor base. Rotate the Nutri
Ninja cup clockwise until it locks in place (you
will hear a click when the lock is engaged).
USE:
5 Once the cup is engaged, the programs available
for that attachment will illuminate. Select
the program (C) desired based on your recipe.
The Auto-iQ program will stop the appliance
automatically at the end of the program.
6 To pause the program, press the selected speed
or Auto -iQ Program a second time.
REMOVAL:
7 Once you have reached your desired consistency,
press the START/STOP button to turn the
program off. Turn the Nutri Ninja cup anticlock wise
(D) and pull straight up to remove (E).
8 Turn the cup upright and remove the Pro
Extractor Blades by twisting the Pro Extractor
Blades anticlockwise.
9 Place the Sip & Seal® lid onto the Nutri Ninja
cup, twist to seal, and enjoy!
10 Make sure the appliance is unplugged when not
inuse.
11 To remove the motor base unit, tip the unit
forward from the rear to easily disengage the
suction cups.
6
www.ninjakitchen.eu
Page 7
®
CARE &
MAINTENANCE
CLEANING:
CAUTION: MAKE SURE THAT THE
MOTOR BASE IS UNPLUGGED FROM THE
POWER SOURCE BEFORE INSERTING
OR REMOVING ANY ATTACHMENT AND
BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR
BASE INTO WATER OR ANY OTHER
LIQUID.
CAUTION: HANDLE BL ADES CAREFULLY
AS THE BLADES ARE VERY SHA RP.
1 Separate/remove all par ts from each other.
2 Clean the motor base with a damp cloth and
wipe dr y.
NOTE: The Double Wall Stainless Steel Nutri
Ninja® Cup is NOT dishwasher safe.
3 Place the cups, lids and blade assemblies in the
top rack of the dishwasher.
OR
4
Carefully hand wash the cups, lids, and blade
assemblies in warm, soapy water with a sof t cloth.
NOTE: If the appliance needs servicing, please
call cus tomer service at 0 800 86 2 0453.
STORING:
1 Store the Nutri Ninja with Auto-iQ® Pro
Complete upright. Secure the power cord on the
back of the base by wrapping the cord around
the cord wrap. Do not place anything on top
of the unit. Store the cups and the rest of the
attachments where they will not be damaged
and won’t cause a hazard.
RESETTING THE MOTOR
THERMOSTAT:
The
Nutri Ninja with Auto-iQ Pro Complete
a safety system that prevents damage to the unit’s
motor and drive system should you inadvertently
overload the appliance. If the appliance is
overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no
food is jamming the cutting blades.
3 Allow the appliance to cool for approximately
30 minutes.
4 Re-install the cup onto the motor base and re-
plug the appliance into the electrical outlet.
5 Proceed with using the appliance as before
while making sure not to exceed the ma ximum
recommended capacities.
features
08 00 8 62 04 53
7
Page 8
®
TROUBLESHOOTING
GUIDE
Unit doesn’t turn on:
• Make sure the unit is plugged in and the START/STOP button is pressed.
• Insert and rotate cup clockwise in the base until it clicks into place. Display should turn on.
Unit doesn’t turn off:
• Remove cup from base by rotating cup anticlockwise and lifting out. Display should turn off. Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
• Set the cup on a level surface. Place the lid or blade assembly on the top of the cup and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so
that the lid/blades evenly align to the cup until you have a tight seal.
Doesn’t mix well, food gets stuck:
• Using the Auto-iQ programs is the easiest way to achieve great results. The pulses and pauses allow the food to settle towards the blade. If food is routinely getting
stuck adding some liquid will usually help.
• When packing the cups, start with fresh items, then add liquids, powders/dry ingredients, and finally frozen items or ice.
Unit moves on the counter while blending:
• Make sure the surface as well as the feet of the unit are clean and dry.
Unit is difficult to remove from the counter for storage:
• To remove the motor base unit, tip the unit forward from the rear to easily disengage the suction cups.
The Euro-Pro, Sip & Seal, Auto-iQ, Nutri-Ninja and Ninja are registered trademarks of Euro-Pro Operating LLC.
Pro Extractor Blades is a trademark of Euro-Pro Operating LLC.