WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NUTRI NINJA
®
WITH AUTO-iQ™.
POLARIZED PLUG
WARNING:To reduce the risk of
electric shock, this appliance has a polarized
plug (one blade is wider than the other). This
plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. DO NOT modify the plug in
any way.
WARNING: Extension cords are
not recommended for use with this product.
WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may cause
the jar to be damaged or to shatter
which may cause personal injury.
2 WARNING: Pro Extractor Blades®
Assembly is sharp and removable, handle
with care. When handling the Pro Extractor
Blades Assembly, always hold them by the
base of the blade assembly. Failure to do so
will result in a risk of laceration.
3 CAUTION: Do not blend hot liquids,
doing so may cause excessive pressure
build-up, resulting in a risk of the user
being burned.
4 CAUTION: We do not recommend
grinding in any of our Nutri Ninja® Cups.
5 CAUTION: Remove the Pro Extractor
Blades Assembly from the cup upon
completion of blending. Some
ingredients have the potential to
expand after blending resulting in
excessive pressure buildup that can
pose a risk of injury.
6 To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or
any other liquid.
7 DO NOT allow the appliance to be used
by children. Close attention is necessary
when used near children. This is not a toy.
8 Never leave an appliance unattended when
inuse.
1
1-877-646-5288
Page 3
9 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
10 Remove the power cord from the electrical
outlet when not in use, before assembling
or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from
the electrical outlet. Never pull from the
powercord.
11 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
12 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions, has been dropped
or damaged in any manner. This appliance
has no serviceable parts. Return the
appliance to SharkNinja Operating LLC for
examination, repair or adjustment.
13 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
14 Always use appliance on a dry, level
surface.
15 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
16 Avoid contact with moving parts.
17 DO NOT attempt to sharpen blades.
18 DO NOT use the appliance if blade
assembly is bent or damaged.
19 To reduce risk of injury, never place the
blade assembly on base without pitcher or
bowl properly attached.
20 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
21 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
22 DO NOT remove the cup from the motor
base while the appliance is in operation.
23 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
24 DO NOT expose cups to extreme
temperaturechanges.
25 DO NOT overfill.
26 DO NOT operate the appliance empty.
27 If the appliance overheats, a thermal
switch will become activated and shut off
the motor. To reset, unplug the appliance
and let it cool down for approximately 30
minutes before using again.
28 THIS PRODUCT IS INTENDED FOR
NOTE: The quantity, sizes, and presence of some accessories depends on the specific model configuration. All
configurations include a motor base, Pro Extractor Blades® Assembly, certain Nutri Ninja® cups, Sip & Seal® Lids,
and instructions.
5
1-877-646-5288
Page 7
Welcome to the Ninja
®
AUTO-iQ™ Experience! The Nutri Ninja® with AUTO-iQ™ features pre-programmed settings that
take the guesswork out of drink and meal making. These programs are timed to deliver consistent, delicious results
that finish on their own so all you have to do is press a button and enjoy!
FEATURES:
• Nutrient & Vitamin Extraction*
• 1000 Watt Motor
• User Interface:
START | STOP
Press once to start continuous running, press again to stop.
Timer counts up by seconds, up to 60 seconds.
PULSE
AUTO-iQ
AUTO-iQ
• Personalized, healthy drinks and juices
• Sip & Seal
• Nutri Ninja
• Cord storage
* Extract a drink containing vitamins & nutrients from fruits and vegetables.
Runs only while pressed down. Short presses make short pulses.
Timer counts up by seconds as long as pressed down.
™
BLEND
Pulses and blends fresh or softer ingredients to create smooth consistent results. Timer counts down.
™
ULTRA BLEND
Pulses and blends frozen, fibrous or hard ingredients to create smooth consistent results. Timer counts down.
®
lids for drinks on the go
®
Cups, BPA free
www.ninjakitchen.com
6
Page 8
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Remove utensils prior to
processing. Failure to remove may cause the
cup to be damaged or to shatter, which may
cause personal injury.
WARNING: Never leave the appliance
unattended while in use.
CAUTION: Do not blend hot liquids, doing
so may cause excessive pressure buildup,
resulting in a risk of the user being burned.
CAUTION: Blades are sharp! Use extreme
caution when handling the Pro Extractor
Blades® Assembly. Always hold them by the
base of the blade assembly.
CAUTION: Never at tempt to remove the cup
while the appliance is still running.
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lids, cups and Pro Extractor Blades Assembly
in warm, soapy water.
Blades Assembly
handle to avoid direct hand contact with blades.
WARNING: Handle the Pro Extractor Blade
Assembly with care when washing, as the blades
are sharp.
3 Rinse and air dry thoroughly.
4 Cups, lids and Pro Extractor Blades Assembly are all
dishwasher safe. It is recommended that the lids and
attachments be placed on the top rack. Ensure that the
Pro Extractor Blades Assembly is removed from the
cups before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
7
1-877-646-5288
When washing the
, use a dish-washing utensil with a
Pro Extractor
Page 9
Use
WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in a risk of
the user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
ASSEMBLYUSEREMOVAL
Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Make sure that the motor base is plugged in for use. No
lights will turn on.
4 Add ingredients to the Nutri Ninja
®
cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line.
5 Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal. (Fig. 1)
6 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, until you feel it click into place. The
Timer light will illuminate.(Fig. 2)
7 Press one of the buttons to activate. (Fig. 3)
NOTE:
When using the AUTO-iQ™ presets, the unit will
operate using pulses, pauses and continuous runs. The
pauses allow the contents of the cup to settle. When the
timer reaches “0”, it will stop by itself.
8 To remove the cup, ensure that the motor has stopped
running. Then turn the cup counter clockwise (Fig. 4)
and pull straight up to remove. (Fig. 5)
9
Turn the cup upright and remove the Pro Extractor
Blades® Assembly by twisting the Pro Extractor Blades
Assembly counter clockwise. Be sure to store the Pro
Extractor Blades Assembly attached to an empty cup
when not in use.
10 Twist the Sip & Seal® lid onto the cup to enjoy your
drink on the go. Press flip top cap firmly into the
opening to get the best seal. The flip top cap locks open
when pressed backward.
11 Make sure that the motor base is unplugged when not
in use.
12 To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups.
www.ninjakitchen.com
8
Page 10
Suggested Uses
PURPOSE / FUNCTIONSUGGESTED CUPTYPE OF FOOD
Chopping / Pulsing
Mixing24 oz.
18 oz.
24 oz.
Salsa
Leafy Herbs
Batters
Dips
Vinaigrettes
Sauces24 oz.
Salad Dressings
Simple Sauces*
Frozen Blending
Nutrient Juices/Smoothies
18 oz.
24 oz.
18 oz.
24 oz.
Ice
Frozen Fruit
Ice Cream
Fruits
Vegetables
Leafy Greens
CAUTION: DO NOT process dry ingredients without adding liquid to the cup. This product is not intended
for dry blending.
* When blending sauces, make sure they’re cooled to room temperature first - Ninja
blending.
FILLING YOUR NUTRI NINJA
®
For best results, always follow recipe directions when filling
your Nutri Ninja® cups. When you’re not using a recipe, use
the following guidelines:
Start with your fresh fruit or veggies. Then add any nuts,
seeds or powder followed by any liquids like juice or milk.
More liquid can help to integrate powder. Then add your
frozen fruit and ice. Remember to securely tighten the blade
and don’t overfill the cups. (Fig. 6)
®
containers are not intended for hot
ice
frozen fruit
juices, liquids
nuts, seeds,
powders
fresh fruits/
veggies
Fig. 6
9
1-877-646-5288
Page 11
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any attachment and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all par ts from each other.
2 Hand Washing: Wash the lids, Nutri Ninja
Pro Extractor Blades® Assembly in warm, soapy water.
When washing the Pro Extractor Blades Assembly, use
a dish-washing utensil with a handle to avoid direct
hand contact with blades. Handle Pro Extractor Blades
Assembly with care to avoid contact with sharp edges.
Rinse and air dry thoroughly.
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.
3 Dishwasher: The pitcher, Nutri Ninja cups, lids, and Pro
Extractor Blades Assembly are all dishwasher safe. It
is recommended that the lids and Pro Extractor Blades
Assembly be placed on the top rack. Ensure the Pro
Extractor Blades Assembly is removed from the cup
before placing in the dishwasher.
4 Wipe the motor base clean with a damp cloth
If the appliance needs servicing, please call customer
service at 1-877-646-5288.
®
cups and
HOW TO STORE
1 Store the Nutri Ninja® with AUTO-iQ™ upright. Secure
the power cord underneath the base by wrapping the
cord around the cord wrap. Do not place anything on
top. Store the cups and the rest of the attachments
along side the appliance where they will not be
damaged and won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja® with AUTO-iQ™ features a unique
safety system which prevents damage to the unit’s
motor and drive system should you inadvertently
overload your appliance. If the appliance is being
overloaded, the motor will stop. To reset the appliance,
follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no food is
jamming the Pro Extractor Blades Assembly.
3 Allow the appliance to cool for approximately 30
minutes.
4 Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before while making
sure not to exceed the recommended maximum
capacities.
www.ninjakitchen.com
10
Page 12
Troubleshooting Guide
PROBLEMSPOSSIBLE REASONS & SOLUTIONS
Unit doesn't turn on
• Make sure the unit is plugged in
• Insert and rotate cup clockwise in the base until it "clicks". Display
should turn on.
Unit doesn't turn off
Lid/Pro Extractor Blades
Assembly hard to assemble
Food is not evenly chopped
Doesn't mix well, food gets
stuck.
Unit moves on counter while
blending
Unit is difficult to remove from
counter for storage
• Remove cup from base by rotating cup counter clockwise and lifting out.
Display should turn off. Unplug the power cord from the outlet.
• Set the cup on a level surface. Place the lid or Pro Extractor Blades
Assembly on the top of the cup and align the threads so that the lid/
blades sit flat on the cup. Twist clockwise so that the lid/blades evenly
align to the cup until you have a tight seal.
• For best results when chopping, make sure all ingredients are as dry
as possible. Cut pieces down to even sizes, and reduce the amount of
food in the cup. Use very short pulses by quickly pressing the "PULSE"
button.
• Using the AU TO-iQ
results. The pulses and pauses allow the food to settle towards the
blade. If food is routinely getting stuck adding some liquid will usually
help.
™
programs is the easiest way to achieve great
• When packing the cups, start with fresh items, then powders/nuts. Add
liquids, and finally frozen items or ice.
• Make sure the surface as well as the feet of the unit are clean and dry.
• Tip unit forward from the back to easily disengage the suction feet.
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer
service: 1-877-646-5288.
11
1-877-646-5288
Page 13
Sample Recipes
Watermelon Cooler
Ingredients:
¼ pear, seeded, cut into chunks
2 large fresh basil leaves with stems removed
2 cups chilled watermelon, seeded, cut into chunks
Directions:
1. Place all ingredients in the order listed above into the Nutri Ninja® 24 oz. cup.
2. Lock cup onto the base and select AUTO-iQ™ BLEND
Purple Potion
Ingredients:
¾ cup beets, peeled, cut into chunks
1 cup frozen blueberries
1¼ cup carrot juice
Directions:
1. Place the beets with 2 cups of water into a small saucepan over medium heat and cook until
tender. Drain, cool completely and set aside.
2. Place all the ingredients in the order listed above into the Nutri Ninja® 24 oz. cup.
3. Lock cup onto the base and select AUTO-iQ™ ULT R A BLE ND
Easy Weeknight Burgers
Ingredients:
8 ounces London Broil, trimmed of fat, cut into 2-inch pieces
Kosher salt and fresh ground black pepper to taste
2 hamburger buns, sliced
Toppings of choice
Directions:
1. Place the meat in the Ninja 24 ounce cup. Lock cup into base and press START|STOP
for 15 seconds.
2. Season ground meat with salt and pepper and form into two patties.
3. Lightly coat a nonstick skillet with cooking spray. Over medium heat, cook the burgers to desired
doneness, about 4-5 minutes per side for medium.
4. Serve each burger on a bun with toppings of choice.
www.ninjakitchen.com
12
Page 14
Notes
13
1-877-646-5288
Page 15
NINETY (90) DAY REFURBISHED PRODUCT LIMITED
WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of ninety
(90) days from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely, at our option, to either: 1) the cost of the repair or replacement of
the unit with a refurbished unit; or 2) an upgrade to a similar model refurbished unit of equal or greater value. Replacement
units/parts will be warranted for the remaining portion of the original (90) ninety day warranty period.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by accident, misuse, abuse, negligent
handling, incorrect voltage, vandalism, unsuitable environments, damage due to faulty packaging or mishandling in transit,
natural disasters or other damages beyond SharkNinja Operating LLC ’s control. This Limited Warranty does not cover
damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any
of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC . Since this unit
has been represented and sold as a refurbished item, this Limited Warranty does not apply to cosmetic damages or defects,
including, but not limited to, scratches, scuffs, dents, or dings. Operating the unit in violation of the instructions in the owner’s
manual will void the warranty terms.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support and product specialists, call 1-877-646-5288 or visit our website ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC ’s sole discretion,
we will repair or replace it as set out in the second paragraph above free of charge. Proof of purchase date and a check made
payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be
included.*
This Limited Warranty is extended to the original purchaser of this refurbished unit and excludes all other legal, implied and/or
conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly
assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or
consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental
or consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you insure
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”.
PRODUCT REGISTRATION
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
www.ninjakitchen.com
14
Page 16
SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
Ninja, Nutri Ninja, Pro Extractor Blades and Sip & Seal are registered
trademarks of SharkNinja Operating LLC.
AUTO-iQ is a trademark of SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to
improve our products, therefore the specifications contained herein are
subject to change without notice.
For Shark Ninja U.S. Patent information visit www.sharkninja.com/USPatents
Printed in China
BL480REF_IB_151123_1
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.