Nilfisk C 100.6, C 110.4, C 110.4 X-TRA, C 105.6, C 120.6 X-TRA User Manual
C 100.6, C 110.4, C 110.4 X-TRA,
C 105.6, C 120.6 X-TRA
User Manual
128700022 b (09.2013)
EN
User Manual .......................................... 3 - 12
DA
Instruktionsbok ...................................... 13 - 22
NO
Instruksjonsbok...................................... 23 - 32
SV
Instruktionsbog ...................................... 33 - 42
FI
Käyttöohje.............................................. 43 - 52
DE
Betriebsanleitung ................................... 53 - 62
FR
Instructions d’utilisation ......................... 63 - 73
NL
Gebruiksaanwijzing ............................... 74 - 83
IT
Istruzioni sull’uso ................................... 84 - 93
ES
Instrucciones de manejo........................ 94 - 103
PT
Instruções de operação ......................... 104 - 113
EL
Οδηγίες χρήσης ..................................... 114 - 124
TR
Kullanım Kılavuzu .................................. 125 - 134
CS
Návod k obsluze .................................... 135 - 144
HU
Használati útmutató ............................... 145 - 154
PL
Instrukcja użycia .................................... 155 - 164
HR
Priručnik za korisnike............................. 165 - 174
SL
Navodila za uporabo.............................. 175 - 184
SK
Návod na používanie ............................. 185 - 194
LV
Lietošanas instrukcijae .......................... 195 - 204
LT
Naudojimosi instrukcija .......................... 205 - 214
ET
Kasutamisjuhend ................................... 215 - 224
RU
Руководство ......................................... 225 - 235
ZH
操作说明 .............................................. 236 - 245
Contents
1 Introduction ................................................................ 3
2 Safety precautions and working techniques ............... 3
3 Before you start using your high pressure washer ..... 7
4 Operating your high pressure washer ........................ 8
5 After using the pressure washer ................................. 9
6 Maintenance ............................................................. 10
7 Troubleshooting ........................................................ 10
8 Warranty Conditions ................................................. 11
9 Main technical Data .................................................. 12
10 Declaration of Conformity ......................................... 12
1 Introduction
1.1 Symbols used to mark instruction
All pictograms attached to the high pressure washer and its components are shown and explained in this manual.
Safety instructions marked with this symbol must be observed to prevent personal injury or
serious damage to property.
Caution where there is a risk of damaging the machine or its individual components.
This symbol indicates tips and instructions to simplify work and to ensure a safe operation of
the high pressure washer.
2 Safety precautions and working techniques
Before starting up your machine for the fi rst time, this instruction manual must be read through
carefully. Save the instructions for later use.
WARNING!
• Inhalation of aerosols can be hazardous to health. Where applicable use a device in order
to avoid or reduce aerosols production, e.g., a shield covering the nozzle. For protection
against aerosols use a respiratory mask of class FFP 2 or higher.
• The high water pressure generated by the machine and the power connection are particular
sources of danger.
• Do not let people who have not been trained in the use of a machine nor read the instruction
manual ope rate the machine.
• Minors should never be allowed to use the machine - except for young trainees over the age
of 16, when working under supervision.
• Before starting up your machine please check it carefully for any defects. If you fi nd any, do
not start up your machine, contact your Nilfi sk distributor. The insulation of the electric cable
should be faultless and without any cracks. If the electric cable is damaged, an authorized
Nilfi sk di stributor should replace it.
• The operator and anyone in the immediate vicinity of the site of cleaning should take action
to protect themselves from being struck by debris dislodged during operation.
• Always unplug the power plug before cleaning or maintenance and when replacing parts or
converting the machine to another function.
3Original Instructions
• Observe the national safety regulations issued, for example, by the employers liability insurance association, social security institutions, occupational safety and health authorities or
other organizations.
Accessories and spare parts
• To ensure the machine safety only use original spare parts from Nilfi sk or approved by Nilfi sk.
• High pressure hoses, fi ttings and couplings are important for the safety of the machine. Only
use hoses, fi ttings and couplings recommended by Nilfi sk.
Physical, sensory or mental conditions
Applications
• The machine may only be operated by people who are in good physical health and in good
mental condition.
• If you have any condition that might be aggravated by strenuous work, check with your doctor before operating the machine.
• Anyone who has consumed alcohol, medicines or drugs affecting their ability to react must
not operate the machine.
This machine has been developed for domestic use such as:
• Car, motorbike, boat, caravan, trailer, patio/drive/fl agstones, woodwork, brickwork, barbecue,
garden furniture, lawn mower.
Any other use is considered as improper use. Nilfi sk accepts no liability for any damage resulting from such use. The risk for such use is borne solely by the user. Proper use also includes
proper operation, servicing and repairs as specifi ed in this instruction.
Clothing and equipment
Always take action to protect yourself when operating the machine.
• Wear shoes with non-slip soles.
• Wear goggles, ear protection and protective clothes during operation
Transporting the high pressure washer
Detergents
Before starting the work
Inspecting the machine
• When transporting the machine in or on a vehicle, it must be secured, e.g. with straps, so
that it cannot slip or tip over.
• Nilfi sk recommends that the machine is positioned horizontally on the backside, when transported in or on a vehicle.
• This machine has been designed for use with cleaning agents supplied or recommended by
Nilfi sk. The use of other cleaning agents or chemicals may adversely affect the function of
the machine.
• Do not use the machine if a supply cord or important parts of the machine are damaged,
e.g., safety device, high pressure hose, and spray handle and spray attachments.
• The trigger of the spray handle must move easily and automatically return to its starting position when released.
• Always keep high pressure hose and spray attachment in good condition (clean, moving
easily) and correctly assembled.
Electrical connection
WARNING!
Minimize the risk for electrical shock:
• Voltage and frequency of the machine (see rating plate) must match the voltage of and
frequency of the mains supply.
• Only connect the machine to electrical installation made by a certifi ed electrician and comply with IEC 60364-1.
4
Original Instructions
• It is recommended that the electrical supply to the machine should include a residual current
device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms.
• Inadequate extension cables can be dangerous. If an extension cable is used, it shall be
suitable for outdoor use, and the connection has to be kept dry and off the ground
• Nilfi sk recommends use of an extension cable drum when cable extension is needed which
keeps the socket at least 60 mm above the ground.
• Cables on extension cable drums should always be completely unwound to prevent overheating. Extension cables must comply with the below-mentioned requirements for length and
cable dimensions:
1.0 mm² Max. 12.5 m
1.5 mm² Max. 20.0 m
2.5 mm² Max. 30.0 m
• If the electric cable is damaged, it must be replaced by an authorized Nilfi sk distributor or
similar qualifi ed person in order to avoid a hazard.
Water connection
High pressure washer not suitable for connection to the potable water mains.
• Connection of the machine to the drinking water mains according to national regulations.
• According to EN 60335-2-79 this machine is only allowed to be connected with the drinking
water mains when an appropriate backfl ow preventer has been installed. Type BA according
to EN 60335-2-79. The backfl ow preventer can be ordered under number 106411177.
• As soon as drinking water has fl own through the backfl ow preventer, it is no longer regarded as drinking water.
• Operation by suction (e.g. a rainwater vessel) is carried out without a backfl ow preventer –
see “Connecting to a pressureless water supply”. The machine can be connected to wa-
ter mains with a max. inlet pressure of 1 MPa/10 bars and max. 40°C.
• An ordinary ½" garden hose of min. 10 m and max. 25 m will be suitable for normal operation at 3 bar inlet pressure.
IMPORTANT !
• Only use water without any impurities.
• If there is a risk of running sands in the inlet water (i.e. from your own well), an additional
fi lter should be mounted.
During work
WARNING!
• Never use the machine in an environment where there could be a danger of explosions. If
any doubt arises contact the local authorities.
• It is not allowed to clean asbestos-containing surfaces with high pressure.
• Never draw in fl uids containing solvents (e.g., gasoline, heating oil, paint thinner or acetone)
These substances damage the materials used in the machine. Their spray is highly combustible, explosive and poisonous.
• Never direct the water jet at yourself, other persons, not even to clean clothing or footwear
- risk of injury.
• Never direct the water jet at pets or other animals.
• Never direct the water jet at live electrical equipment or the machine itself - danger of
short-circuiting.
• Hold the spray lance fi rmly with both hands. The spray lance is affected by a thrust of up to
16.4 N during operation.
• This high pressure washer machine must not be operated at temperatures below 0°C.
• Never start up a frozen machine. Frost damages are not covered by the guarantee!
• Always ensure fi rm and safe footing
• Keep the machine as far away as possible from the object being cleaned.
• Always adjust the distance and thus the pressure of the nozzle to the surface, which is to be
cleaned to avoid any damage to the surface being cleaned.
• The machine shall be operated in an upright position.
• Do not cover the machine or use it in a room without adequate ventilation.
5Original Instructions
• If the machine is left or not used for 5 minutes, it must be switched off on the start/stop
switch "O" (1)
After fi nishing the work
WARNING!
• Always switch off the machine and unplug the power plug from the socket after work and
when leaving the machine unattended.
• Disconnect water inlet hose between machine and water supply.
• Wind up electrical cable and high pressure hose – to avoid damage of cable, plug, high
pressure hose and fi ttings.
• Always empty pump, hose and accessories of water after use of the machine and prior to
storing.
Maintenance and repairs
WARNING!
• Always disconnect the electrical plug from the socket prior to maintenance, cleaning and
repair.
• Any repair should always be made in Nilfi sk authorized workshop with original Nilfi sk spare
parts.
• Do not attempt any maintenance not described in the instructions.
• If the machine refuses to start, stops, pulsates, pressure fl uctuates, motor busses, fuse
blows or no water comes out, check the trouble shooting diagram in these instructions. In
case other problems occur, please contact your local Nilfi sk distributor.
Recycling the high pressure washer
Make the old machine unusable immediately.
• Unplug the machine.
• Cut the electric cable.
Do not discard electrical appliances with household waste. As specifi ed in European Directive
2002/96/EC on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest dealer
for further information.
6
Original Instructions
Loading...