1 On/off button
2 On/off button, remote control
3 On/off indicator, electronic
4 Power level, remote control
5 Power level indicator, electronic
6 Auto function, remote control
7 Auto function, electronic
8 HEPA fi lter indicator, electronic
9 Dust bag indicator, electronic
10 Hose handle
11 Cable rewinder
O
12 Parking bracket
13 Open/close button, dust container
14 Dust bag
15 Pre-fi lter
16 HEPA fi lter
17 Open/close button, accessory lid
18 Crevice nozzle
19 Upholstery nozzle
20 Brush nozzle
21 Hard fl oor nozzle (not standard on
all models)
22 Combination nozzle
23 Turbo nozzle (not standard on all models)
24 Carrying handle
25 Battery indicator
Table of contents
Overview 4
Display symbols 4
Safety instructions 5
Instructions for use 6
Cleaning tips 8
Trouble shooting 9
Service and maintenance etc. 9
Guarantee and service 10
WEE 11
CE Declaration 12
Display symbols on handle
Battery indicator will
appear when battery
power is low and battery
change is needed.
The dust bag is full and
needs to be changed.
Flashing indicator early warning, the dust
bag soon needs to be
changed.
The HEPA fi lter needs
to be changed. Flashing
indicator - early warning,
the HEPA fi lter soon
needs to be changed
Machine ON
Indicates current power
level
Indicates that the Auto
function is enabled.
Specifi cations and details are subject
to change without prior notice.
4
Page 5
Elite
T
H
Safety instructions
• Do not use the machine without
dust bag and fi lters properly fi tted.
• This machine is not intended for
the suction of hazardous materials
or gas, doing so may expose
people to serious health risks.
• The machine must not be used for
the suction of water or other liquids.
• Do not pick up sharp objects such
as needles or pieces of glass.
• Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
• Use and store this machine indoors
and in a dry environment, 0 °C to
60 °C.
• Do not use the machine outdoors.
• Do not handle the machine with wet
hands.
• Turn off the machine before unplugging.
• To unplug, grasp the plug, not by
pulling on the cord. Do not carry or
pull the machine by the cord.
• The machine must not be used if
the cord shows any sign of damage.
Regularly inspect the cord for
damage, in particular if it has been
crushed, shut in a door or run over.
• Do not use the machine if it appears
faulty. Have the machine inspected
by an authorized service centre if
the machine has been dropped,
damaged, left outdoors or has been
exposed to water.
• No changes or modifi cations to the
mechanical or electrical safety
devices should be made.
• All repair must be carried out by an
authorized service centre.
• Use only original dust bags, original
fi lters and original accessories from
your local dealer.
Use of unauthorized dust bags and
fi lters will void the warranty.
• Turn off the machine and unplug
before starting dust bag or fi lter
change, grasp the plug, not by
pulling on the cord.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards
involved.
• Children shall be supervised to
make sure that they do not play with
the appliance.
• Cleaning and user maintenance
shall not be made by children without supervision.
• If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly
qualifi ed persons in order to avoid
hazard.
EN
FR
I
NL
SV
NO
FI
O
Z
5
Page 6
Elite
T
H
EN
FR
I
NL
SV
NO
O
Instructions for use
Before using the machine make sure
that the voltage shown on the rating
plate underneath the machine
corresponds with the mains voltage.
The machine is supplied with dust bag
and pre-fi lter.
1
Numbers
pages 118-120.
Start and stop
Start
Pull out the cord and plug the machine
to a wall socket.
On/off:
Option 1: Use on/off on machine
Option 2: Use on/off on the remote
control (bend end).
refer to illustrations on
Connecting hose, tube and nozzles
1
1. Insert the hose connector into the
suction inlet until it engages by a
“click” sound.
2. Connect the hose handle to the
tube and twist until they engage
with a click.
3. Connect the tube and nozzle and
twist until they engage with a click.
4. The tube is telescopic and can be
adjusted to your height.
Pull out the adjusting handle to
extend the tube, and pull back to
shorten to desired length.
Disengage
• Disengage the nozzle from the
tube by pressing the button.
• Disengage the hose handle from
the tube by pressing the button.
• To remove the hose connection
from the suction inlet, press button
and disengage the hose.
Z
Power can alter between fi ve
Change of dust bag and fi lters
settings. Current setting is shown on
the carrying handle of the machine.
On the Superior model the power
setting is also shown on the remote
control display.
The size and quality of the dust bag
and fi lters affect the machine effi cien-
cy. Use of non original dust bags or
non original fi lters can cause restricted
air fl ow which may lead to machine
overload. Using non-original dust bag
Stop
or fi lters will void the warranty.
Turn off the machine and unplug.
Unplug by grasping the plug, not by
pulling on the cord.
The machine is a completely air tight
construction. This ensures that air and
dirt going into the machine, can only
get out through the HEPA14 fi lter in
the end.
Changing the dust bag
2
The dust bag indicator shows when to
change the dust bag.
Always use original dust bags.
1. Open the lid by pulling up at the
latch release.
2. Remove dust bag holder from dust
compartment.
3. Remove dust bag from holder. The
dust bag closes automatically.
6
Page 7
Elite
T
H
4. Insert the new dust bag by guiding
the plastic collar into the tracks of
bag holder.
5. Place the bag holder in the dust
compartment. Check that the dust
bag is correctly fi tted into dust
compartment.
3
Changing the pre-fi lter
The pre-fi lter protects the motor by
absorbing micro-particles that the dust
bag can not keep. Change the prefi lter with every fourth dust bag. The
pre-fi lter is located behind the dust
bag. Always use original fi lters.
1. Open the lid by pulling up at the
latch release.
2. Remove bag holder with bag from
dust compartment.
3. Open pre-fi lter hatch by pulling
handle.
4. Take out the pre-fi lter.
5. Fit the new pre-fi lter (ensure that
the text is readable) and close the
pre-fi lter hatch.
6. Place the bag holder in the dust
compartment. Check that the dust
bag is correctly fi tted into dust
compartment.
4
Changing the HEPA fi lter
The HEPA fi lter cleans the exhaust
air from micro particles the dust bag
can not keep. The HEPA fi lter can
not be brushed or washed clean. All
models have a HEPA fi lter indicator
that shows when to change the HEPA
fi lter. Always use original dust bags
and fi lters.
1. Open the lid on the back of the
machine by pulling the fl ap.
2. Take out the HEPA fi lter.
3. Insert the new HEPA fi lter. Check
that the HEPA fi lter is correctly fi tted. NB: Only touch the fi lter
plastic frame
4. Put the lid back and close by pushing the fl ap in. NB: Assure lid is
fully closed.
Adjust the suction power
All models have a fi ve step adjustment
remote control.
The suction power is adjusted on the
remote control on the hose handle.
Power
Power regulation -
regulation +
Auto function
Current level is shown on the carrying
handle (on Superior also on remote
control display)
Auto function enabled will let the
machine adjust the suction power
according to the surface.
This is only valid for Comfort and
Superior models.
Battery replacement in hose
handle:
1. Open the lid of
the battery holder by sliding
the lid towards
the front of the
hose handle.
2. Replace the
used batteries
with two new
ones, type 1.5V AAA. Make sure
the polarity of the batteries is placed correct at the bracket.
3. Slide the battery lid back until you
hear a click.
5
Parking the tube and nozzle
There are two grooves for parking.
One located on the underside of the
machine to use when machine stands
EN
FR
I
NL
SV
NO
O
Z
7
Page 8
Elite
T
H
EN
FR
I
NL
SV
NO
on the back. The other on the back
of the machine, to be used when the
Cleaning tips
machine is standing on its wheels.
Stop & Go parking
Adjust the suction power by means of
the remote control.
Elite Comfort & Superior models au-
6
tomatically put the machine in parking
mode when the nozzle is parked in the
groove on the machine back side.
If needed to continue with cleaning
and a nozzle parked, the machine can
be started on the hose handle or the
Crevice nozzle
Use the crevice nozzle for narrow
spaces.
7
Upholstery nozzle
Use the upholstery nozzle for
upholstered furniture.
on/off button.
8
Brush nozzle
Thermal fuse
Use the brush nozzle for curtains and
window sills.
The machine is fi tted with a thermal
Hard fl oor nozzle
fuse, which prevents the machine from
overheating. If the thermal fuse blow,
9
Use the nozzle for hard fl oors.
the machine automatically switches off
10
the motor and must cool before it can
be started again.
Combination nozzle
Adjust the combination nozzle
depending on type of fl oor.
O
Restart
Turbo nozzle
11
Z
1. Turn off the machine and unplug
from the wall socket.
Use the turbo nozzle for effi cient
carpet cleaning.
2. See to that nothing blocks the air
fl ow through hose handle, hose,
tube, nozzle, dust bag or fi lters.
3. Let the machine cool.
4. Plug in the machine again and
push start button. The machine will
The crevice, upholstery and brush
nozzle are located under the accessory lid. The accessory lid is opened
by pressing the release button down-
wards. The lid is closed manually.
not start until cool enough. If the
machine does not start turn it off
and unplug. Try again in a while.
The different models of these vacuum
cleaners can include different nozzles.
Warning
When activating the automatic
cord rewind, care must be taken as
the plug at the end of the cord can
swing during the last part of the rewinding. It is recommended that you
hold on to the plug while rewinding.
8
Page 9
Elite
T
H
Trouble shooting
Repair or service of electrical
components as cord or motor, must
only be carried out by an authorized
service center.
If the machine
does not start
Reduced suction power
If the machine
stops
See to that the plug
is correctly fi tted to
the wall socket.
A fuse in the
building may have
blown and needs to
be changed.
The cord or plug
can be damaged
and must be
repaired by an
authorized service
center.
The dust bag can
be full and needs
to be changed, see
instructions.
The pre-fi lter or the
HEPA fi lter can be
blocked and have
to be changed, see
instructions.
The hose handle,
hose, tube or
nozzle can be
blocked and needs
to be cleaned.
The thermal fuse
may have blown,
see instructions.
Service and maintenance
• Store the machine indoors and in a
dry environment.
• Change the pre-fi lter with every
fourth dust bag. The dust bag
package includes four dust bags
and one pre-fi lter.
• Clean the machine surface with a
dry cloth or a damp cloth with a
little cleaning agent.
• Order original accessories from a
local dealer.
• Service – contact your local dealer.
Recycling and scrapping
Recycle the wrapping and scrap the
machine according to recommendations from the local authorities.
Cut the cord as short as possible to
avoid that someone gets injured on
the scrapped machine.
Environmental commitment
This machine is des
environment in mind. All plastic parts
can be used for recycling.
Responsibility
Nilfi sk disclaim all responsibility for all
damage caused by incorrect use or
modifi cation of the machine.
Information
For more information see
www.nilfi sk.com
Guarantee
The warranty can vary between
different countries. Contact your local
dealer for information.
igned with the
EN
FR
I
NL
SV
NO
FI
O
Z
9
Page 10
Elite
T
H
EN
FR
I
NL
SV
NO
Z
Guarantee and service
Nor will it cover incorrect or poor
confi guration, i.e. setting up or
connection, nor fi re-damage, fi re,
This Nilfi sk Elite Series vacuum
cleaner is covered by a fi ve (5) year
guarantee on the machine, which
covers the motor, cable rewinder,
switch and casing. The nozzles, fi lters,
hoses, tubes and other accessories
are covered twelve months due to
manufacturing fault only and excludes
wear and tear.
lightning strike or unusual voltage
fl uctuations or any other electrical
disturbances such as defective fuses
or defective electrical installations on
the supply grid, and defects or
damage in general that Nilfi sk-
Advance consider to be the result of
causes other than manufacturing and
material defects.
The guarantee includes spare parts
and labour costs, and covers manu-
The guarantee becomes void:
facturing and material defects that
may occur during normal domestic
use.
Service under the guarantee will only
be performed if it can be proven that
the defect occurred within the product’s guarantee period (a correctly
completed guarantee certifi cate or
printed/stamped cash register receipt
with date and product type) and on
O
the condition that the vacuum cleaner
was bought as a new product and
distributed by Nilfi sk-Advance.
• If a defect is caused by the use of
non-original Nilfi sk dust bags and fi lters.
• If the identity number is removed
from the vacuum cleaner.
• If the vacuum cleaner has been
repaired by a non-Nilfi sk authorized
dealer.
• If the machine is used in a commercial environment, i.e. building
contractors, cleaning contractors,
professional trades or any other
non-domestic usage.
In the event of the repair of defects,
the customer must contact Nilfi sk-
The guarantee is valid in:
Advance to be directed to a service
agent at the customers own expense.
Upon completion of any repairs necessary, the vacuum cleaner will be returned to the customer
Republic, Slovakia, Greece, Russia,
Turkey, Australia and New Zealand.
• Normal wear and tear of accessories and fi lters.
• Defects or damage occurring as a
direct or indirect result of incorrect
use - such as the vacuuming of
rubble, hot ashes or carpet deodorant powder.
• Abuse, loss or lack of maintenance
as described in Instructions for use.
• Plaster dust.
• Saw dust.
• Water.
• Should not be used for home renovations.
Addendum Australia:
Our goods come with guarantees that
cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major
failure and for compensation for any
other reasonably foreseeable loss or
damage. You are also entitled to have
the goods repaired or replaced if the
goods fail to be of acceptable quality
and the failure does not amount to a
major failure.
Nilfi sk vacuum cleaners for domestic
10
Page 11
Elite
T
H
use are warranted for 2 years from the
date of purchase by:
Nilfi sk-Advance Pty LtdUnit 1/13 Bessemer Street Blacktown NSW 2148
Phone: 1300 556 710
E-mail: sales@nilfi sk.com.au
Find your local service agent here:
http://www.nilfi sk.com.au.
The bene fi ts under this warranty are in
addition to your national law of sale.
WEEE
The symbol on the product or on
its packing indicates that this product
may not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for
the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help
prevent potential negative consequences for the environment and
human health, which could otherwise
be caused by inappropriate waste
handling of this product. For more
detailed information about recycling
of this product, please contact your
local city offi ce, your household waste
disposal service or the shop where
you purchased the product.
EN
FR
I
NL
SV
NO
O
Z
11
Page 12
Elite
T
H
EN
FR
I
NL
SV
NO
Declaration of Conformity
Product:Vacuum Cleaner
Type:
The design of the unit
corre sponds to the following
pertinent regulations:
Applied harmonised standards:EN 60335-1:2012
Applied international standards
and technical specifi cations:
Name and address of the person
autho rised to compile the
technical fi le:
Nilfi sk-Advance Sdn Bhd
Sd 14, Jalan KIP 11
Taman Perindustrian KIP
Sri Damansara
52200 Kuala Lumpur
Website: www.nilfi sk.com
MEXICO
Nilfi sk-Advance de Mexico, S. de R.L.
de C.V.
Agustín M. Chavez No. 1, PB ofi cina 004
Col. Centro de Ciudad Santa Fe
01210 Mexico, D.F.
Website: www.nilfi sk.com