Nikon Keymission 170 User Manual

YP6K01(11)

6MQA5511-01

Printed in China

Procedure for Pairing for the First Time (for iOS Users)

Here, pairing refers to the setting used to connect the camera and smartphone or tablet (below, “smart device”) through Bluetooth.

Parts of the Camera

Photo button

Movie button

k button

Before Pairing

Camera

• Insert a microSD memory card with suﬃcient free space into the camera.

• Check that the battery is suﬃciently charged so that the camera does not turn oﬀ during the procedure.

Smart device

• Two apps are available: “SnapBridge” and “SnapBridge 360/170”. Use “SnapBridge 360/170” when pairing your device with this camera.

• Do not pair from the Bluetooth setting screen of the smart device.

Pairing Procedure

1 Check that the camera is o (the screen is o).

• To turn oﬀ the camera, press and hold the movie button for at least three seconds.

2 Enable Bluetooth and Wi-Fi® on the smart device.

• Do not pair from the Bluetooth setting screen of the smart device.

3 Install the SnapBridge 360/170 app.

4 Press the movie button or photo button to turn on the camera. 5 Press H or I to highlight a language, and press the k button to select it.

6 Press I to scroll through the screen, select Options, and press

the k button.

B If You Select Later

If Later is selected, you can follow the procedure below to display the screen in step 6 and perform pairing later. Press the k button to display the menu M c (setup) menu M Camera settings M Network menu M Connect to device.

set SnapBridge later from the Network menu, select Later.

Options

Later

7 Press I to scroll through the screen, select Next, and press the k button.

• The screen shown on the right is displayed on the camera.

• The status lamps ﬂash red and green alternately while the camera is waiting to be paired.

8 Launch the SnapBridge 360/170 app on the smart device. 9 When the screen shown on the right is displayed on the smart device, tap the

camera name.

• When the accessory selection screen is displayed, tap the camera name after the

B Bluetooth icon in top right corner of the smart device screen changes from white to grey. It may take a while before the camera name is displayed.

10 Check the authentication code.

• Conﬁrm that the camera and smart device display the same authentication code.

• Perform the following operations on the camera and smart device at the same time.

device and select OK. Auth. code 000000

Back

- On the camera, press I to scroll through the screen, select OK, and press the k button.

- On the smart device, tap Pairing (the name of the button varies with the OS version).

11 Follow the on-screen instructions to complete the pairing process.

• Camera: If pairing is successful, the screen shown on the right is displayed. Press I to scroll through the screen, select Next, and press the k button. Then follow the onscreen instructions.

• Smart device: Follow the on-screen instructions.

On your smart device, go to the app store and search for SnapBridge 360/170. After installing, open the SnapBridge

Connect to Camera

Camera name

KeyMission 170_xxxxxxxx

Your camera and smart device are connected! SnapBridge will send your photos to your

When You Cannot Pair

Perform the following and then pair again by proceeding to “Pairing Procedure”.

• Press and hold the movie button on the camera for at least three seconds to turn oﬀ the camera.

• Close the SnapBridge 360/170 app.

• Remove the Bluetooth device (registered as

the camera name) in the Bluetooth setting

screen of the smart device. If the language selection dialog is not displayed when the camera is turned on, perform pairing by following the procedure described in “If You Select Later” in step 6.

To Learn More About Using the SnapBridge 360/170 App

See the online help (tap Other M Info/settings M Instructions in the app).

Trademark Information

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Nikon Corporation is under license.

• iOS is a trademark or registered trademark of Cisco Systems, Inc., in the United States and/or other countries and

is used under license.

• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance.