New Holland TN85DA, TN75DA, TN85A, TN70DA, TN75SA User Manual

...

New Holland TN-A Series Tractor Specifications

TN60A/TN60DA TN70A/TN70DA TN75A/TN75DA/TN75SA TN85A/TN85DA TN95A/TN95DA

TN60A TN70A TN75A TN85A TN95A

N60DA TN70DA TN75DA TN85DA TN95DA

ODEL TN75SA

NGINE

Gross engine hp (kW)* 57 (42.5) 70 (52.2) 75 (55.9) 80 (59.7) 90 (67.1) PTO hp (kW)* 45 (33.6) 57 (42.5) 62 (46.3) 69 (51.5) 77 (57.4)

Cylinders ...........................................................3........................................................... ......................................4......................................

Aspiration Natural Turbocharged Turbocharged Natural Turbocharged

Displacement, cu. in. (L) ....................................................179 (2.9) .................................................... ...............................274 (4.5) ...............................

Rated speed, rpm .................................................................................................2300 .................................................................................................

Maximum Torque, ft.-lbs. (Nm) 159 @ 1400 rpm 213 @ 1400 rpm 220 @ 1400 rpm 236 @ 1400 rpm 269 @ 1400 rpm

Engine torque rise, % 26 32 36 32 37

Fuel capacity, gal. (L) ................................23 (87) on TN-A Standard models ................................ ...............................23.5 (89) ...............................

*mfg’s estimate

TRANSMISSIONS

Choice of transmission

• 8 x 8 constant mesh transmission with synchronized mechanical shuttle (available on select TN-A models only)

• 12 x 12 Synchro Command™ transmission with synchronized mechanical shuttle (available on TN-A models only)

• 12 x 12 Synchro Command™ transmission with power shuttle (available on TN95A and TN95DA)

• 16 x 16 Synchro Command™ transmission with your choice of synchronized mechanical or electro-hydraulic, no-clutch power shuttle (Except TN95A and TN95DA)

(216 @ 1400 rpm) (289 @ 1400 rpm) (298 @ 1400 rpm) (320 @ 1400 rpm) (365 @ 1400 rpm)

...............................19.5 (74) TNS-A and TND-A models...............................

TRACTION CLUTCH

w/ mechanical shuttle, in. (mm) 11 (280) ........................................................................11 (280) ........................................................................

w/ electro-hydraulic power shuttle, in. (mm) ............................................................................Six 5.2 (113) wet organic plates............................................................................

Differential lock (front/rear) .....................Limited slip, mechanically engaged (electro-hydraulically engaged on TN75SA SuperSteer™ models).....................

ELECTRICAL

Alternator (amps)

Less cab ..........................................................65.......................................................... ....................................120....................................

With cab ..........................................................85.......................................................... ....................................120....................................

Cold cranking amps ..................................................................................................730 ..................................................................................................

BRAKES

Type ...............................................................................Wet, two disc, self-adjusting...............................................................................

Parking brake ..........................................................................Independent, four 3.5 in. wet disc ..........................................................................

INDEPENDENT PTO

Speed ..................................................................................................540 ..................................................................................................

PTO clutch, in. (mm) .............................................................................11 (280) dry cerametallic plate.............................................................................

HYDRAULICS

Pump type ..................................................................................................Gear..................................................................................................

System ............................................................................................Open center............................................................................................

Nominal system pressure, PSI (bar) ............................................................................................2755 (190) ............................................................................................

Standard pump flow, gpm (lpm) 12.8 (48) 12.8 (48) 16.9 (64) 15.0 (56.9) 15.0 (56.9) Optional pump flow

STEERING SYSTEM

Steering Pump T

provides flow for power steering, FWD engagement, differential lock engagement and lubricating the transmission

Pump flow

with mechanical shuttle ....................................7.4 (28.0).................................... .........................................9.4 (35.6)...................................................

with power shuttle .............................................................................................9.4 (35.6) .............................................................................................

, gpm (lpm) 16.9 (64) 16.9 (64) NA NA NA

ype

, gpm (lpm)

Dry organic plate ............................................................. Dry cerametallic plate.............................................................

..................................................................................................

Gear

New Holland TN-A Series Tractor Specifications

TN60A/TN60DA TN70A/TN70DA TN75A/TN75DA/TN75SA TN85A/TN85DA TN95A/TN95DA

TN60A TN70A TN75A TN85A TN95A

N60DA TN70DA TN75DA TN85DA TN95DA

ODEL TN75SA

-POINT HITCH

Category ...................................................................................................II, I...................................................................................................

Draft control sensing ...................................................................................Mechanical, lower link ...................................................................................

Fast raise/lower ..............................................................................................Standard ..............................................................................................

Link ends ...............................................................................................Flexible ...............................................................................................

Lift capacity, SAE @ 24", lb. (kg) ...........................................................................................3960 (1800) ...........................................................................................

TURNING WITHOUT BRAKES, ft. (mm)

2WD turning radius ..................................................11.9 (3628) .................................................. 12.1 (3678) NA

2WD turnaround diameter ..................................................14.0 (4255) .................................................. 14.1 (4305) NA

FWD turning radius ..................................................12.5 (3810) .................................................. .............................12.7 (3860) .............................

FWD turnaround diameter ..................................................14.1 (4288) .................................................. .............................14.2 (4340) .............................

FWD SuperSteer™ turning radius NA NA 11.2 (3415) NA NA FWD SuperSteer turnaround diameter NA NA 6.7 (2043) NA NA

VEHICLE WEIGHT* lbs. (kg)

TN-A 2WD 4980 (2260) 5020 (2275) 5020 (2275) 6008 (2725) NA TN-A FWD 5375 (2440) 5415 (2455) 5415 (2455) 6118 (2775) 6118 (2775) TND-A 2WD 5565 (2525) 5605 (2545) 5605 (2545) 6449 (2925) NA TND-A FWD 5960 (2705) 6000 (2720) 6000 (2720) 6559 (2975) 6559 (2975) TNS-A FWD, ROPS NA NA 5585 (2535) NA NA TNS-A FWD, Cab NA NA 6050 (2745) NA NA

TIRE OPTIONS

R1 "General Farming"- great for a wide variety of agricultural applications. R3 "All Weather"- great for highway mowing, parks, orchards and light industrial applications. R4 "Industrial"- great for light industrial applications, rental yards, contractors and municipalities. Galaxy "Turf Special"- great for golf courses and stadium grounds maintenance.

*Approximate weights for base tractor with full fuel tank; 16.9x28R1 rear tires and 9.5Lx15 (2WD) or 12.4R20 (FWD) front tires; mechanical shuttle transmission; without front weights or rear

wheel weights; or rear wheel weights; single rear remote valve

TN60A TN60DA TN75SA TN85A TN85DA

DIMENSIONS* TN75A

Wheelbase, in. (mm)

2WD 81.5 (2070) 83.9 (2131) NA 86.7 (2202) (TN85A) 89.1 (2262) (TN85DA)

FWD 78.9 (2005) 81.3 (2065) 93.5 (2375) 83.7 (2125) 86.0 (2185)

Height, in. (mm)

Top of ROPS, up 95.1 (2416) NA 95.1 (2416) 95.1 (2416) NA Top of ROPS, down 75.1 (1908) NA 75.1 (1908) 75.1 (1908) NA Top of cab NA 90.8 (2307) 90.8 (2307) NA 90.8 (2307)

Overall length (front weight to end of 3-pt. lift arms), in. (mm)

2WD

FWD

Min/Max. overall width .................................................................................67.2 (1708) / 92.7 (2355).................................................................................

* Base tractor with: 14.9x28 rear tires, 9.5x15 front (2WD), 11.2x20 (FWD)

TN70A TN70DA TN95A TN95DA

153.3 (3894) 155.7 (3954) NA 157.5 (4000) (TN85A) 159.8 (4059) (TN85DA)

151.6 (3852)

TN75DA

154 (3912)

154.9 (3935)

NA (TN95A) NA (TN95DA)

157.5 (4000) 159.8 (4059)

e 2

+ 1 hidden pages