NETGEAR WPN511 User Manual

)NSTALLATION'UIDE

NETGEAR RangeMax™ Wireless PC Card WPN511

These setup instructions assume that you will connect to an access point or wireless router.
Estimated Completion 15-25 minu tes.

Installation

1. First, install the WPN511
software.

Insert the NETGEAR CD. If the CD main
page does not appear, double click
Autorun.exe on the CD.

a. Click Install the Software. The Check

for Updates window opens.

b. If you are connected to the Internet, click

Check for Updates. If not, you can
choose to install from the CD.

c. When the Installation Complete message appears, click Next.

2. Now, insert the wireless PC card.

a. When prompted, insert your wireless PC

card.
You will be prompted to select the country

where you are located.

b. Select the country and click Agree

3. Use the Smart Wizard to set up your wireless PC card.

a. Windows 2000 users go to Step b. W indows

XP or Vista users can set up the wireless
adapter with the NETGEAR Smart Wizard
(recommended) or the Windows
configuration utilities.

• NETGEAR Smart Wizard: Reveals

more information about each network
and makes it easier to troubleshoot
network connection problems.

• Windows configuration utilities: See the Windows documentation or

“Using Windows XP and Vista Wireless Configuration Utilities” at:

http://documentation.netgear.com/reference/enu/winzerocfg/index.htm

b. Click Next to accept the NETGEAR Smart

Wizard.

c. You will be prompted to let the wizard help

you connect to a network (recommended).

d. Click Next to accept.

4. Connect to a wireless network.

a. Select a wireless network from the drop-

down list. The wizard records your choice.
Note: Hidden networks do not broadcast

the Network Name (SSID). These
networks are in the drop-down list,
but the Network Name (SSID) is
blank.

If the network uses security, the Smart
Wizard detects it.

b. Follow the Wizard steps for Security (if used) and for saving a Profile.
c. After you have reviewed the settings, click Finish.
The WPN511 icon appears in the system tray and on the desktop; and the

Settings page opens. The wizard initiates your wireless connection. It can take a
minute to establish your wireless connection.

Using the Status Bar

The status bar is located at the bottom of the Settings page.

Security

Wireless

network

Find a Network

Understanding the Status Bar

Wireless network Identifies which wireless network you have joined.
Security • Locked: security enabled.

• Unlocked: security not enabled.

Channel The wireless channel used by the network. If many wireless networks

in your area use the same channel they can interfere with one

another.
Throughput Wireless throughput measured in Mega bits per second.
Signal strength More dots indicates a stronger signal. Usually, you will experience

higher throughput when the signal is strongest.
Find a Network Click Find a Network to open the Connection Wizard.
Connection

status

Identifies the status of your network connection.

• Connected to Internet: Wireless Internet connection is OK.

• Connected to Router: Wireless connection to the router is OK but
the router is not connected to the Internet.

• 169.254.x.x or ___.___.___.___ : The wireless connection to the
router is OK but there is a problem with the router. See the online
help or the NETGEAR RangeMax™ Wireless PC Card WPN511
User Manual on the NETGEAR CD for troubleshooting tips.

Note: To optimize throughput, connect to a network with a high-speed router or access

point, and a high-speed Internet connection. For more information about optimizing
wireless performance, and network bandwidth, see the NETGEAR RangeMax™
Wireless PC Card WPN511 User Manual on the NETGEAR CD.

Channel

Throughput

Signal
strength

Connection status

Technical Support

After completing the Smart Wizard configuration assistant, locate the serial number on the
bottom label of your product and use it to register your product at

http://www.NETGEAR.com/register.

Registration on the website or over the phone is required before you can use our telephone
support service. The phone numbers for worldwide regional customer support centers are
on the Warranty and Support Information card that came with your product.

http://kbserver.netgear.com for product updates and Web support.

Go to

January 17, 2007

This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.

© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the
United States and/or other countries. Other brand and product names are trademarks or registered trademarks of
their respective holders. Information is subject to change without notice.