Page 1
Dual Band High Powered 802.11n Outdoor Access Point Data Sheet
WND930
Outdoor Access Point
The WND930 Outdoor Access Point is a dual band concurrent 802.11n
Outdoor Access Point that combines high power, optimal high gain antennas,
and an industrial grade enclosure for optimal outdoor deployment. The
WND930 Outdoor Access Point is powered by redundant dual Power
over Ethernet (PoE) gigabit ports as well as the capability to power other
PoE devices. The WND930 Outdoor Access Point operates under harsh
environment with its industrial grade IP-67 enclosure and an embedded
heater to allow the Access Point to operate in below freezing point
temperature. The WND930 Outdoor Access Point is ideal for hotels,
resorts, schools, multi-dwelling apartments, and other locations needing
high throughput, high capacity outdoor coverages. The WND930 Outdoor
Access Point can operate either as a point-to -point mesh link between
remote locations or as an Access Point providing coverages for users. As
with all NETGEAR wireless products, the WND930 Outdoor Access Point is
designed with an easy setup for a reliable, high performance and aordable
total cost of ownership.
Features
High powered for super coverage
•Up to 500 mW of RF output power
combine with high gain (8 dBi) dual
band internal antenna to maximize
coverage
•High receive sensitivity
(up to -90 dBm) to optimally
balance uplink and downlink
Industrial grade enclosure to
operate in harsh environment
•Ingress Protection marking
of IP-67 rated to operate
in extreme environment
•Embedded heater automatically
activate to allow proper operation
in below freezing temperature
Flexible Power over Ethernet
choices to maximize redundancy
and deployment options
•Dual gigabit Ethernet ports with
redundancy to enable AP to
continue to operate in the case
of intermittent power failure
•PoE power sourcing (PSE) to
power other PoE devices such
as surveillance cameras directly
from the WND930 Outdoor
Access Point
Flexible deployment options for
a variety of applications
•Flexible deployment models
including point to point mesh with
embedded high gain directional
antenna and access point mode
with external antenna option
•Robust wall mounting and
pole mounting kits for flexible
deployment options
Page 1 of 3
Page 2
Dual Band High Powered 802.11n Outdoor Access Point Data Sheet
WND930
Target Applications
Outdoor coverage around oce buildings and meshing to a remote location Coverage around swimming pools in hotels
Wireless coverage in train stations and other public areas Wireless coverage for school parking lots and sports complexes
IP-67 rated high powered
dual band access point
PoE powered with 2 redundant gigabit port
and one PoE (PSE) gigabit port
Flexible mounting option with pole mount WND930 Outdoor Access Point with external
Wall mounting and pole mounting kit
with water-tight Ethernet cable coupler
antennas to provide hotspot coverage
External omni antennas sold
as optional accessory kit
Page 2 of 3
Page 3
Dual Band High Powered 802.11n Outdoor Access Point Data Sheet
WND930
Technical Specifications
Physical Characteristics
Power
Power over Ethernet
(802.3af or 802.3at)
2 ports 802.3af or 1 port of
802.3at for AP operation
2 ports of 802.3at for concurrent
AP and PoE PSE operations
Physical Dimensions
Dimensions (LxWxH)
255x225x78 mm
10 x10 x3 in
Weight
1894 kg (67 oz)
Mounting
Wall mount/pole mount kit included
Interfaces and Indicators
Physical Interface
Two (10/100/10 00Base-T Ethernet
(RJ-45) port with Auto UplinkTM (Auto
MDI-X) with PoE PD (Power over
Ethernet In)
On e (10/10 0/10 00Base-T Ethern et
(RJ-45) port with Auto UplinkTM (Auto
MDI-X) with PoE PSE (Power over
Ethernet Out)
External Antenna Connectors
Two connectors for 2.4GHz antennas
Type N connector (female)
Two connectors for 5GHz antennas
Type N connector (female)
LEDs
Power, Activity, 2.4GHz, 5GHz, Heater
Default Reset Button
Environmental Conditions
Operating Temperature
-4° to 140° F
(-20° to 60°C)
Storage Temperature
-40° to 176° F
(-40° to 80° C)
Operating Relative Humidity
Minimum 10%
Maximum 90%
Storage Humidity
Minimum 5%
Maximum 95%
MTBF
@ 25°C > 10,45K hours
@ 60°C > 290,000 hours
Ingress Protection Marking
IP-67 rated
Power Consumption
15.2 W max (heater o, no PoE out)
25.1 W max (heater on, no PoE out)
33.9 W max (heater o, PoE out)
43.8 W max (heater on, PoE out)
RF Characteristics
Standards
IEEE 802.11n 2.0 specification
IEEE 802.11g
IEEE 802.11b
IEEE 802.11a
Frequency Band
2.4GHz and 5GHz dual band
concurrent operation
Maximum RF Power Output
(country dependent)
27 dBm (500 mW) 2.4GHz
26 dBm (400 mW) 5GHz
Maximum Theoretical Throughput
300 Mbps (2.4GHz)
300 Mbps (5GHz)
Antenna Gain
8 dBi (2.4GHz)
8 dBi (5GHz)
Network Management
Standalone
Centralized management (future)
Advanced Wireless Modes
WDS Point-to-point wireless bridge mode
Wireless Access point mode
Security
Wired Equivalent Privacy (WEP)
Encryption
WiFi Protected Access Pre-shared Key
(WPA-PSK, WPA2-PSK)
MAC address filtering
1 BSSID
802.11e WMM
Wireless multimedia mode for QoS
Package Contents
•Outdoor High Power Wireless N
Access Point
•Wall mounting bracket
•Pole mount clamps
•Weatherproof cable glands
•Installation guide
•Warranty/support information card
Warranty and Support
Warranty
NETGEAR 2-year warranty
Safety Certification
ITU-T K.21
Optional Support
PMB0351: 5 years OnCall 24x7
PMB0331: 3 years OnCall 24x7
PMB0311: 1 year OnCall 24x7
PRR0351: 5 years XPressHW
PRR0331: 3 years XPressHW
Product Ordering Information
•WND930-10000S
High Powered Dual Band Outdoor
802.11n Wireless Access Point
•WND930-100NAS
High Powered Dual Band Outdoor
802.11n Wireless Access Point (US)
•ANT24501B-10000S
External antenna bundles
(2 x 2.4GHz and 2 x 5GHz)
NETGEAR and the NETGEAR logo are trademarks and/or registered trades of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Other brand names mentioned herein
are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. © 2014 NETGEAR, Inc. All rights reserved.
D-WND930-0
Page 3 of 3
Loading...