Netgear RBK40 quick start Guide

Quick Start Guide
Set Up Your Orbi Router and Satellite
Set up your router and satellite using one of the following options:
NETGEAR Orbi app. Follow these steps:
a. Scan a QR code or search for
NETGEAR Orbi in the Apple App Store or Google Play Store.
b. Download and launch the NETGEAR
Orbi app on your mobile device and follow the prompts.
Web browser. Follow these steps:
a. Unplug your modem and remove
and reinsert the backup battery if it uses one.
b. Plug the modem back in.
c. Use the included Ethernet cable to
connect your modem to the yellow Internet port on your router.
Note: If you want to connect your
router to an existing gateway, we recommend that you turn o your existing gateway’s WiFi.
d. Plug in your router.
The Power LED on the back of the router lights green. If the Power LED does not light, press the Power On/O button.
e. Wait for the router’s ring LED to
light white.
f. Place your satellite, plug it in, and
wait for the satellite’s ring LED to light blue or amber.
If the satellite’s ring LED lights magenta, move the satellite closer to the router.
For more information, see Satellite
Sync LED Colors.
g. Connect your computer or mobile
device to the router or satellite with an Ethernet or WiFi connection:
Satellite Sync LED Colors
Aer the satellite is powered on, the satellite’s ring LED lights white while the satellite attempts to sync with the router. Then the ring LED lights one of the following colors for about three minutes and then turns o:
Blue
The connection between the satellite and router is good.
Amber
The connection between the satellite and router is fair. Consider moving the satellite closer to the router.
Magenta
The satellite was unable to connect to the router. Move the satellite closer to the router.
Note: If the ring LED lights
magenta aer about one minute, press the Sync button on the router and satellite. If the satellite successfully syncs with the router, the satellite’s ring LED lights white. Then the ring LED lights blue to indicate a good connection and then turns o.
• Ethernet. Use an Ethernet cable
to connect your computer to the router or satellite.
• WiFi. Use the preset WiFi
network name (SSID) and password on the label of the router or satellite to connect to the Orbi WiFi network.
h. Launch a web browser, visit
orbilogin.com, and follow the
prompts.
If a login window opens, enter the user name and password. The user name is admin and the default password is password.
March 2017
NETGEAR, Inc.
350 East Plumeria Drive San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Centre Curraheen Road, Cork, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.
Orbi Router
2
(Model RBR40)
Ethernet cable
Orbi Satellite
(Model RBS40)
Orbi Router Overview
1
Orbi Satellite OverviewPackage Contents
Support
Thank you for purchasing this NETGEAR
1
product. You can visit
www.netgear.com/support to register
your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only ocial NETGEAR support resources.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/ detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/
regulatory/.
See the regulatory compliance document before connecting the power supply.
Power adapters (2)
(vary by region)
2
6
3 4
1
Ring LED (not shown in image)
5
Sync button (also used for WPS connection)
3
Internet port (the satellite does not include an Internet port)
4
Ethernet ports
7
2
6
4
5
5
Power On/O button and Power LED
6
DC power connector
7
Reset button
7
Loading...