Netgear POE101 Data Sheet
POE101
Power Over Ethernet Adapters
Connectivity, Power, Ethernet – Right Where You
Need It
Get power for your NETGEAR 802.11b Access Point where you need it! NETGEAR's
Power Over Ethernet Adapters make it easy for you to extend the reach of your wireless
local network. They provide an ideal way to locate an access point in a building ceiling
or attic for optimal radio coverage – closer to an antenna – without requiring a nearby
AC power outlet. Consisting of a base unit and a terminal unit, this useful set of
adapters can extend the placement of a wireless access point by up to 328 feet (100
meters) using standard Category 5 Ethernet cable. At the same time, the adapters
protect the access point or other device from potential power surge damage.
Gives you the freedom to mount your wireless access points or other devices virtually
anywhere inside your building, including areas where you may not have power and/or
Ethernet access, so you can make the most of your wireless or Ethernet network. Supports
distances up to 328 feet.
Reduces signal loss through an antenna cable and eliminates the threat of power surge damage
to your connected devices.
Thorough testing ensures quality and dependable operability, which NETGEAR backs up
with a 2-year warranty.
Far-Reaching
Protective
Unfailing
Everybody’s Connecting.
™
• Help is there when you need it!
NETGEAR provides 24x7
telephone and e-mail technical
support in English, with selected
local language support during
office hours.
Desktop PCs
Cable/DSL
Modem
24 volt
power supply
Cable/DSL
Web Safe
Router RP614
ME102 802.11b
Wireless Access Point
POE101
Terminal unit
POE101
Base unit
Internet
NETGEAR
3
4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR
E-mail: sales@NETGEAR.com
www.NETGEAR.com
©2002 NETGEAR, Inc. NETGEAR
®
, the
Netgear Logo, the Gear Guy, and
Everybody’s connecting are trademarks or
registered trademark of Netgear, Inc. in
the United States and/or other countries.
Microsoft, Windows, and the Windows
logo are trademarks, or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Other brand and product names are
trademarks or registered trademarks of
their respective holders. Information is
subject to change without notice. All
rights reserved.
D-POE101-0
System Requirements
- Two straight through Ethernet cables, not included
with the NETGEAR POE101:
• One short cable from an Ethernet hub or
switch to the POE101 base unit
• One long cable (up to 328 feet) for connecting
from base unit to a terminal unit
- One 5V DC powered NETGEAR Access Point
(one set of POE101 Adapters per Access Point
is required)
Package Contents
- Power over Ethernet base unit
- Power over Ethernet terminal unit
- Installation guide
- Localized AC power cable
- 100~240 V AC to 24V DC 30W power adapter
- Two 2-foot DC power cables
- One 2-foot Ethernet cable
- Wall mount kit
- Warranty card
- Support information card
Related Products
- ME102 802.11b Wireless Access Point
Technical Specifications
• POE Base unit:
- Power input: 24V DC
- 10/100 Mb LAN IN
- 10/100 Mb LAN OUT with 24V DC power
• POE Terminal unit:
- Power output: 5V DC 2.5A max.
- 10/100 Mb LAN IN with 24V DC power
- 10/100 Mb LAN OUT
• AC power adapter:
- Input: 100~240V AC 0.85A 50~60 Hz
- Output: 24V DC 1.5A
• Cables:
- Ethernet cable with RJ-45 connectors for terminal
to access point
- DC power cable for terminal unit to NETGEAR
ME102 (North American version)
- DC power cable for terminal unit to all other
NETGEAR 5V DC powered devices
- Localized AC power cable for wall to power adapter
• Physical Dimensions:
- Base and Terminal units: 3-1/8" (8.0 cm) x
3-1/16" (7.8 cm) x 13/16" (5.0 cm)
- Power adapter: 3-3/4" (9.6 cm) x 1-5/8"
(4.15 cm) x 1-1/8" (2.9 cm)
• Weight:
- Base unit: 2.4 oz (68 grams)
- Terminal unit: 2.7 oz (76 grams)
- Power adapter: 5.4 oz (153 grams)
• Warranty:
- 2 year limited warranty (GE)
- 1 year limited warranty (NA)
Loading...