NETGEAR JFS524NA User Manual

JFS524v1h6 IG 21sept12.fm Page 1 Friday, September 21, 2012 12:31 PM

Installation Guide

ProSafe 24-Port Ethernet Switch JFS524

Step 1. Connect equipment

Computer Server

JFS524

Optional router

Internet

Optional modem

Step 2. Connect power

Step 3. Check status

Power LED

Off

Top Port LEDs

Link (on)

Activity (blinking)

No link (off)

Bottom Port LEDs

100 Mbps link

10 Mbps link

September 2012

This symbol appears in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the WEEE directive.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders. © NETGEAR, Inc. All rights reserved.

For indoor use only in all EU countries and Switzerland.

For the complete EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Specifications

Specification Description

Network interface Twenty-four (24) 10/100 Mbps Ethernet RJ-45 ports 10BASE-T

or 100BASE-TX

Network cable Category 5 (Cat 5) or better Ethernet cable

Ports 24

AC power 100-240VAC 50-60Hz, 1.2A max., localized to country of sale

Power consumption 9.4W max

Weight 1.43 Kg (3.15 lbs)

Dimensions (W x D x H)

330 mm x 169 mm x 43 mm

12.99 in. x 6.65 in. x 1.69 in.

Operating temperature

0–50° C (32–122° F)

Operating humidity 10%–90% relative humidity, noncondensing

Electromagnetic compliance

CE Class A), FCC Class A, VCCI Class 1, C-Tick Class A, CCC

Safety agency approvals

CE mark, Commercial UL listed (UL 60950-1), CB, CCC

Technical Support

After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR web site. For product updates and web support, visit http://support.netgear.com

JFS524v1h6 IG 21sept12.fm Page 2 Friday, September 21, 2012 12:31 PM