Netgear FS108v2, FS105v2 Quick Start Manual

FS105v2-FS108v2.fm Page 1 Tuesday, September 18, 2012 2:41 PM

ProSafe Fast Ethernet Switch

FS105v2/FS108v2

Installation Guide

Step 1. Connect equipment

Computer Server

FS105v2/FS108v2

Optional router

Internet

Optional
modem

Step 2. Connect power Step 3. Check status

Power LED

On

Off

Port LEDs

100 Mbps link

(left LED)

10 Mbps link

(right LED)

Activity (blinking)

No link (off)

September 2012

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is
subject to change without notice. Other brand and product names are registered trademarks or trademarks of
their respective holders. © NETGEAR, Inc. All rights reserved.

For indoor use only in all EU countries and Switzerland.

For the complete EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.

Specifications

Specification Description

Network interface RJ-45 connector for 10BASE-T or 100BASE-TX

Ethernet interface

Network cable Category 5 or better Ethernet cable

Ports FS105v2: 5

FS108v2:8

Power adapter 7.5V @ 1A DC input

Power consumption FS105v2: 1.5W

FS108v2: 1.8W

Weight FS105 v2: 0.2635 kg (0.58 lbs)

FS108 v2: 0.478 kg (1.054 lbs)

Dimensions
(W x D x H)

FS105 v2: 94 mm x 101 mm x 27 mm

FS108 v2: 158 mm x 101 mm x 27 mm

Operating
temperature

0 to 40° C (32 to 104° F)

Operating humidity 10% to 90% relative humidity, non-condensing

Electromagnetic
compliance

CE Class B, FCC Class B, C-Tick Class B

Safety agency
approvals

CE mark

Technical Support

After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit http://support.netgear.com.

FS105v2-FS108v2.fm Page 2 Tuesday, September 18, 2012 2:41 PM