Netgear FS108P Quick Start Manual

ProSafe 8-Port Switch with 4-Port PoE FS108P

Step 2. Connect power Step 3. Check status

Optional
modem

Step 1. Connect equipment

FS108P

Optional router

Computer Server

Internet

On

Off

Power LED

Activity (blinking)

No link (off)

(right LED)

10 Mbps link

Port LEDs

(left LED)

100 Mbps link

Installation Guide

PoE LEDs

Less than 7W of PoE
power is available

PoE Max. LED

PoE ports are working normally (off)

PoE MAX LED was active
in the previous 2 minutes (blinking)

PoE Active

No PoE use (off)

PoE fault

PoE Fault LED

FS108P IG 11oct2.fm Page 1 Friday, October 12, 2012 3:29 PM

September 2012

This symbol appears in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the
European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the
WEEE directive.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.

For indoor use only in all EU countries and Switzerland.

For the complete EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.

Specifications

Specification Description

Network interface 10/100Mbps Auto-Uplink RJ45 ports with PoE enabled (ports 1 - 4)

10/100Mbps Auto-Uplink RJ45 ports (port 5 - 8)

Network cable Category 5 (Cat 5) or better Ethernet cable

Ports 8

Power adapter 48V @ 1.25A DC input

PoE Power
consumption

53W max (all PoE ports, ports 1 to 4), 15.4W max per PoE port

Weight 0.74 kg (1.7 lbs)

Dimensions
(W x D x H)

235 mm x103 mm x 27 mm

9.3 in. x 4.1 in.x 1.1 in.

Operating
temperature

0 to 40 C (32 to 104 F)

Operating humidity 10% to 90% relative humidity, non-condensing

Electromagnetic
compliance

CE Class B; FCC Class B; VCCI Class B; C-Tick Class B, CCC

Safety agency
approvals

CE/LVD, CCC

Technical Support

After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit http://support.netgear.com.

FS108P IG 11oct2.fm Page 2 Friday, October 12, 2012 3:29 PM