Nemco 56050 Parts List
3
2
1
#41
#20
#7
#16
#37
PRODUCT WARRANTY
IMPORTANT
Side Pin groove must be fully
inserted for proper cutting.
R
COMPACT COMPACT
COMPACT NEW MODEL
COMPACT COMPACT
GEARLESS AND FEARLESSGEARLESS AND FEARLESS
GEARLESS AND FEARLESS
GEARLESS AND FEARLESSGEARLESS AND FEARLESS
INSTITUTIONAL USE ONLY
Except as otherwise provided below, Nemco Food Equipment, LLC and including its manufacturer Crown Ware Manufacturing
Inc. (“Nemco”) warrants, to the original user, its can opener products (other than cutters, bearings and gripper) to be free of
mechanical defects in material and workmanship under “normal use” (defined below) for the shorter of the following periods: (a)
one (1) year from the date placed in service by the original user, or (b) 18 months from the date of shipment from its factory. The
warranty provided herein shall be limited to parts and labor. Any determination that a product is defective or covered by this
warranty, shall be made by Nemco, in its sole discretion. The determination of whether to repair or replace a defective, covered
product, or to refund the purchase price for the product, will be at Nemco’s sole discretion. This warranty does not cover
products used outside the United States, or damages caused by accident, misuse, negligence of any person other than Nemco,
fire, flood or other casualty. Any alteration to the product or unauthorized repair voids this warranty. For purposes of this
warranty, the phrase, “normal use” shall mean the use of the product in connection with food in accordance with the product
manual accompanying the product.
Nemco shall be responsible only for repairs or replacements of defective parts performed by Nemco’s authorized service
personnel. Authorized service agencies are located in principal in cities throughout the continental United States, Alaska and
Hawaii.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED. NEMCO EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY THAT ANY OF ITS PRODUCTS IS
MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR DOES NOT INFRINGE ON THE RIGHTS OF ANY
THIRD PARTY. THE FOREGOING WARRANTY SHALL BE NEMCO’S SOLE AND EXCLUSIVE OBLIGATION.
ANY PERSON’S (BUYER, USER OR OTHERWISE) EXCLUSIVE REMEDY AGAINST NEMCO, AND NEMCO’S
SOLE OBLIGATION, FOR ANY AND ALL CLAIMS, WHETHER FOR BREACH OF CONTRACT, WARRANTY,
TORT(INCLUDING WITHOUT LIMITATION NEGLIGENCE), OR OTHERWISE, SHALL BE LIMITED TO NEMCO
REPAIRING OR REPLACING THE PRODUCT, OR, AT NEMCO’S OPTION, REFUNDING THE PURCHASE PRICE
THEREFORE. IN NO EVENT SHALL NEMCO HAVE ANY LIABILITY FOR INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES. Any person desiring to make any claim against Nemco must do so within six (6) months after
expiration of the applicable warranty period, or such claim shall be forever barred.
Limited Warranty applies if the following instructions are followed:
FOR INSTITUTIONAL USE ONLY
• Inspect and change cutters regularly.
• Cutter area must be kept clean at all times. Do not allow
food and debris to dry up and accumulate in this area.
• Do not over rotate top handle to cut beyond the initial
seam cut as this may cause metal slivers. If on the first
cut the lid does not open (check carefully as lid may be
opened, however, due to lid being vacuum sealed it may be
difficult to lift lid off) do not continue to rotate handle.
Exclusively from
301 Meuse Argonne
301 Meuse Argonne
Hicksville, Ohio 43526
Hicksville, Ohio 43526
1. 800.782.6761
1. 800.782.6761
"EXCEEDING YOUR EXPECTATIONS"
Printed in Canada Nov. 20, 2006
wwwwww. ne mcof oodequ ip. co m. nemcofoodequip. com
• Recommended Daily Use - maximum up to 50 cans
per day depending on usage (type of cans being
opened up to No.10 can size).
• If used according to recommended daily use and
manual instructions, the cutter should last up to 2500 5000 cans depending on handling and actual cans used.
• If you open both ends of can for recycling, please
double your usage figure.
Product Manufactured in Canada by
www.canopeners.ca
OPERATING INSTRUCTIONS
1. Place can gently as shown. Be sure that can
touches the body of the can opener and the
U-shaped pin of the Cutter Housing #27 is
over the lid seam.
2. Lower can opener head GENTLY on can. Do
not slam down. Push down side handle to lock
can in position.
3. Turn top handle in a CLOCK-WISE direction.
WARNING
Over-rotating beyond the inital
seam cut may cause metal slivers. Incision point
may be sharp. Train operators when to stop cutting
and how to remove lid safely.
RECOMM. HANDLE TURNS:
Can Size Diameter Handle turns
#2 3” 3 revolutions
#5 5” 5 revolutions
#10 6” 6 revolutions
CLEANING INSTRUCTIONS
1. UNLOCK SIDE HANDLE #20. Slightly press Gripper
Housing #7 to pull out Side Locking Pin #16.
2. Tilt back Gripper Housing #7. Clean Gripper.
3. Pull out Cutter Housing Assembly #41. Rinse under
tap and clean food debris with brush.
To re-assemble:
1. Insert Cutter Housing Assembly #41.
2. Return Gripper Housing #7 to closed position.
3. Slightly press Gripper Housing #7 to re-insert the
Side Locking Pin #16 (ENSURE SIDE HANDLE #20 IS
UNLOCKED)
Rinse cutter side
under tap. Brush for
thorough cleaning.
DISHWASHER SAFE
CLOCK-WISE
UNLOCK
LOCK
Do not tamper with
factory settings or else
warranty will be void.
Quick-Release
Quick-Change Cutter
PURCHASE A SPARE
CUTTER HOUSING
FOR NO DOWN-TIME
Be sure the bent side
of Can Sitter #37 is
facing down.
Pull out Can Sitter #37 for
regular cleaning.
ELIMINELIMIN
ELIMIN
ELIMINELIMIN
AA
TE DOTE DO
A
TE DO
AA
TE DOTE DO
WN-TIMEWN-TIME
WN-TIME
WN-TIMEWN-TIME
Purchase a spare Cutter
Assembly for quick
replacement.
REPLACING CUTTER
FROM CUTTER ASSEMBLY
1. Hold Cutter Shaft #26 with wrench and loosen
Cutter Locking Bolt #31(left hand thread) with
another wrench by turning clockwise.
2. Remove Cutter Washer #30 and Cutter Spacer #29
and Cutter #28.
3. Replace with new Cutter #28.
4. Reverse steps 2 and 1 to re-assemble.
26
6
IMPORTANT
27
Cutter edge #28
must face
Right Way as
shown in diagram.
6
RIGHT WAY
28
29
30
HOLLOW SIDE
DOWN
Tighten
31
Loosen
[Left hand bolt]
PARTS DIAGRAM
1
26
3
6
2
5
4
6
28
6
7
29
10
11
30
12
15
8
6
9
Includes 6, 26,27, 28, 29, 30, 31
Optional Spare
Cutter Assembly #41
31
13
14
40
16
17
22
24
25
27
35
37
39
38
Optional
Under Clamp Assembly #42
Optional Spare
Side Pin Assembly #43
33
34
32
36
21
20
18
5
23
19
COMPACT REPLACEMENT PARTS
Model Description No. 56050-1, 56050-2, 56050-3
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Part #
56030
56031
56032
56033
56034
56027
56035
56036
56028
56037
56038
56039
56040
56041
56042
56043
56044
56045
56046
56047
56048
Name
Top Handle Top Cover
Top Handle Knob
Top Handle Knob Screw
Top Handle
Handle Screw
Bearings
Gripper Housing
Gripper Shaft
Gripper
Bushing
Bushing
Locking Bridge Mechanism
Locking Bridge Pin
Pan Head Set Screw
Gripper Housing Spring
Side Locking Pin
Bushing
Bushing
Side Handle Shaft
Side Handle
Mechanism Housing
No.
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Part #
56049
56051
56052
56053
56054
56055
56029
56024
56056
56057
56058
56059
56060
56026
56061
56062
56063
56064
56065
56022
56023
56068
For more information on part orders or repair
service, contact NEMCO Food Equipment at
1-800-782-6761
PRODUCT SERVICE
Nemco has a staffed service department and we believe prompt service is extremely important to
our customers. Therefore, we request all product service inquiries be handled in the following
manner:
(1) The end user should call Nemco Customer Service with the company name, address,
phone number, model number, serial number (if applicable), Nemco Sales Order
number or Dealer Purchase Order Number and the nature of the problem (the “Claim
Information”).
(2) The Nemco Customer Service Department will decide on the most appropriate
course of action. If Nemco determines that it must inspect a product, the following
procedure will be followed.
The end user will obtain a Return Goods Authorization number from Nemco Customer Service to
return the product to Nemco for inspection. Please be sure to use this number on the box and on
paperwork sent with the unit. Return the unit to Nemco. The Nemco Service Department will
determine if the problem is covered by the foregoing warranty. If so, Nemco will repair the unit and
return it to the end user. If the unit is determined not to be covered by the foregoing warranty, the
dealer will be contacted to determine the next course of action.
Name
Ball Setscrew
Adjusting Nut
Rubber Depth Control
Adjusting Bolt
Cutter Shaft
Cutter Housing
Cutter
Cutter Spacer
Cutter Washer
Cutter Locking Bolt
Rubber PIpe Bumper
Square Pipe
Rubber Pipe End
Side Locking Pin Chain
Top Table Base
Can Sitter
Under Clamp
Table Clamp Bolt
Anti-Slip Rubber Pad
Cutter Housing Assembly
Under Clamp Assembly
Side Pin Assembly
Loading...