How it Works
NEC
Loading...
P
Loading...
Loading...
PlasmsSync PX-42XR4A
Reference
28 pgs177.62 Kb0
User's Manual
140 pgs2.25 Mb0

NEC PlasmsSync PX-42XR4A Reference

Download
======================================================================
Control Commands for NEC Plasma (Basic) Rev 1.0
Copyright (C) NEC Solutions (America), Inc. 2002-2006
---------------------------------------------------------------------­ Updated on November 29, 2006
---------------------------------------------------------------------­ This file contains information about NEC plasma control commands.
====================================================================== Contents
1. Plasma Control
2. Connection Method
3. Interface Conditions
4. List of Commands
5. Command Descriptions
6. Table of Response Error Codes ======================================================================
1. Plasma Control
---------------------------------------------------------------------­NEC plasmas make use of control commands that control the
functions of the plasma via connection with a personal computer or another device.
======================================================================
2. Connection Method
---------------------------------------------------------------------­The following 3 kinds of connection methods are available for sending
and receiving control commands.
1. Serial connection using the serial port on the plasma A serial cable is required.
Status of supported connection +----------------------------------------------------------------------------------------------------------------------------------+---------+ | | (1) | | | Serial | | | port | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42VP4/42VP4D/42VP5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42VM4/42VM5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42VR5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42XM2/42XM3/42XM4/42XM5/50XM3/50XM4/50XM5/50XM6/61XM2+/61Xm3/61XM4/60XM5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ | PX-42XR3/42XR4/42XR5/50XR4/50XR5/50XR6/61XR3/61XR4/60XR5 | Yes | +----------------------------------------------------------------------------------------------------------------------------------+---------+ Yes: Supported No: Not supported ======================================================================
3. Interface Conditions
---------------------------------------------------------------------­Serial connection
---------------------------------------------------------------------­The communications method conforms to the RS-232C standard.
Baud rate: 9600 bps Data length: 8 bits Parity bit: Odd parity Stop bits: 1 bit Communications mode: Full duplex
The control connector is described below. The PC CONTROL connector is a D-SUB 9-pin connector. 1
2 To TxD of PC 3 To RxD of PC 4 5 To GND of PC 6 7 To CTS of PC 8 To RTS of PC 9
======================================================================
4. List of Commands
---------------------------------------------------------------------­ * Example for command
---------------------------------------------------------------------­ Command name Example
----------------------------------------------------------------------
001. POWER ON 9FH 4EH 00H
002. POWER OFF 9FH 4FH 00H
003. INPUT SW CHANGE DFH 47H 01H
004. VOLUME GAIN DATA DFH 7FH 03H
005. AUDIO MUTE ON 9FH 3EH 00H
006. AUDIO MUTE OFF 9FH 3FH 00H
007. CONTRAST GAIN DATA DFH 7FH 03H
008. BRIGHT GAIN DATA DFH 7FH 03H
009. SHARPNESS GAIN DATA DFH 7FH 03H
010. COLOR GAIN DATA DFH 7FH 03H
011. TINT GAIN DATA DFH 7FH 03H
012. PICTURE MODE SELECT DFH 0AH 01H
013. COLOR TEMP SELECT DFH 00H 01H
014. RED GAIN DATA DFH 7FH 04H
015. GREEN GAIN DATA DFH 7FH 04H
016. BLUE GAIN DATA DFH 7FH 04H
018. BASS GAIN DATA DFH 7FH 03H
019. TREBLE GAIN DATA DFH 7FH 03H
020. BALANCE GAIN DATA DFH 7FH 03H
021. SCREEN MODE SELECT DFH 51H 01H
022. V.POSITION GAIN DATA DFH 7FH 03H
023. H.POSITION GAIN DATA DFH 7FH 03H
024. V-HEIGHT GAIN DATA DFH 7FH 03H
025. H-WIDTH GAIN DATA DFH 7FH 03H
026. AUTO PICTURE SELECT DFH 7FH 03H
033. Long Life Set (PDP Saver Set) DFH 6BH 03H
035. ALL RESET 1FH 54H 00H
039. BNC INPUT DFH 8CH 01H
042. FREQUENCY REQUEST 1FH 26H 00H
043. INPUT MODE REQUEST 1FH 41H 00H
044. VIDEO ADJUST REQUEST 1FH 45H 00H
045. AUDIO SELECT REQUEST 1FH 6FH 00H
046. FAILURE MODE REQUEST 1FH 3FH 00H
052. RUNNING SENSE 1FH 88H 00H
056. MULTI MODE SELECT DFH 03H 03H
057. MULTI MODE REQUEST 1FH 3BH 00H
059. MULTI (SPLIT) SCREEN SELECT DFH 07H 01H
067. PICTURE MEMORY SELECT DFH 38H 01H
068. PICTURE MEMORY SET DFH 25H 02H
079. VOLUME GAIN REQUEST 1FH 0EH 00H
082. SEAMLESS SWITCH DFH 7EH 03H
* Availability by Model
---------------------------------------------------------------------­ Model No.
------------------------­ 01 : PX-42VM4/42VP4/42VP4D 02 : PX-42XM2 03 : PX-50XM3 04 : PX-61XM2+ 05 : PX-42VM5/42VP5/42XM3 06 : PX-42VR5/42XR3 07 : PX-50XR4/61XR3 08 : PX-42XM4/42XM5/50XM6/50XM5/61XM4/60XM5 09 : PX-42XR4/42XR5/50XR5/50XR6/61XR4/60XR5
Meaning of Symbol
----------------------------------------------------­ * Supported
- Not supported
• Availability by Model
Command Name
1 POWER ON ********* 2 POWER OFF ********* 3 INPUT SW CHANGE ********* 4 VOLUME GAIN DATA ********* 5 AUDIO MUTE ON ********* 6 AUDIO MUTE OFF ********* 7 CONTRAST GAIN DATA ********* 8 BRIGHT GAIN DATA *********
9 SHARPNESS GAIN DATA ********* 10COLOR GAIN DATA ********* 11TINT GAIN DATA ********* 12PICTURE MODE SELECT ********* 13COLOR TEMP SELECT ********* 14RED GAIN DATA ********* 15GREEN GAIN DATA ********* 16BLUE GAIN DATA ********* 18BASS GAIN DATA ********* 19TREBLE GAIN DATA ********* 20BALANCE GAIN DATA ********* 21SCREEN MODE SELECT ********* 22V.POSITION GAIN DATA ********* 23H.POSITION GAIN DATA ********* 24V.HEGHT GAIN DATA ********* 25H-WIDTH GAIN DATA ********* 26AUTO PICTURE SELECT ********* 33LONG LIFE SET (PDP Saver Set)********* 35ALL RESET ********* 39BNC INPUT ********­42FREQUENCY REQUEST ********* 43INPUT MODE REQUEST ********* 44VIDEO ADJUST REQUEST ********* 45AUDIO SELECT REQUEST ********* 46FAILURE MODE REQUEST ********* 52RUNNING SENSE ********* 56MULTI MODE SELECT ********­57MULTI MODE REQUEST ********­5 9 M U LT I ( S P L IT ) S C R E E N S EL E C T - - - * - - * - * 67PICTURE MEMORY SELECT -----**-* 68PICTURE MEMORY SET -----**-* 79VOLUME GAIN DATA REQUEST-----**-* 82SEAMLESS SWITCH ----*****
123456789
======================================================================
5. Command Descriptions
---------------------------------------------------------------------­Precautions with Inscriptions: (*3) Checksum : "CKS" inscription
This is the value of the lower 8 bits of the results calculated in byte units from all the of the data up to the immediately preceding data. Example) 20H 81H 01H 60H 01H 00H 03H + + + + + + = CKS
(*4) Response error number This is the value of the error number at the time of an error. See "NAK" of "6-2. Data portion of response".
001. POWER ON ********************************************************************** Function: This command switches on the main power of the plasma.
Command: 9FH 80H 60H 4EH 00H CKS
Response: At the time of a success 3FH 60H 80H 4EH 00H CKS
Supplement: The plasma doesn't accept another command during power on processing.
002. POWER OFF ********************************************************************** Function: This command switches off the main power of the plasma.
Command: 9FH 80H 60H 4FH 00H CKS
Response: At the time of a success 3FH 60H 80H 4FH 00H CKS
Supplement: The plasma doesn't accept another command during power off processing.
003. INPUT SW CHANGE ********************************************************************** Function: This command switches the input terminal.
Command: DFH 80H 60H 47H 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 Input Select
Terminal Terminal
number name VM VP VR XM XR
01H Video1 * * * * * 02H Video2 * * * * * 03H Video3 * * * * ­05H DVD/HD1 * * * * * 06H DVD/HD2 * * * * * 07H RGB/PC - - - - * 07H RGB1/PC1 * * * * -
08H RGB2/PC2 * * * * ­0CH RGB3/PC3 * * * * ­0DH HD3 (SCART3) * * * * ­0EH DVD/HD3 (HDMI) - - - - * 1AH DVD/HD4 (HDMI) - - - - *
* : Supported
- : Not supported
Response: At the time of a success 3FH 60H 80H 47H 00H CKS
Command example: * When switching to the Video1 connector DFH 80H 60H 47H 01H 01H 08H
004. VOLUME GAIN DATA ********************************************************************** Function: This command sets the volume.
Command: DFH 80H 60H 7FH 02H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 05H : User Sound Gain Flag DATA01 01H : Volume Gain Flag DATA02 Volume Gain
00H : Step 0 : 0AH : Step 10 (default) : 2AH : Step 42
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 05H : User Sound Gain Flag DATA01 01H : Volume Gain Flag
Command example: * Setting Volume to "10" DFH 80H 60H 7FH 02H 05H 01H 46H
005. AUDIO MUTE ON ********************************************************************** Function: This command mutes the sound.
Command: 9FH 80H 60H 3EH 00H CKS
Response: At the time of a success 3FH 60H 80H 3EH 00H CKS
Supplement: * Sound mute is cancelled for the following: Input connector switching Video signal switching Volume adjustment
006. AUDIO MUTE OFF ********************************************************************** Function: This command cancels the sound muting.
Command: 9FH 80H 60H 3FH 00H CKS
Response: At the time of a success 3FH 60H 80H 3FH 00H CKS
007. CONTRAST GAIN DATA ********************************************************************** Function: This command controls the Contrast gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 07H : Contrast Gain Flag DATA02 Contrast Gain CCH : -52 : FFH : -01 00H : 0
01H : +01 : 14H : +20
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 07H : Contrast Gain Flag
008. BRIGHT GAIN DATA ********************************************************************** Function: This command controls the Bright gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 08H : Bright Gain Flag DATA02 Bright Gain E0H : -32 : FFH : -01 00H : 0 01H : +01 : 20H : +32
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 08H : Bright Gain Flag
009. SHARPNESS GAIN DATA ********************************************************************** Function: This command controls the Sharpness gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 06H : Sharpness Gain Flag DATA02 Sharpness Gain F0H : -16 : FFH : -01 00H : 0 01H : +01 : 10H : +16
Only when an RGB signal is connected DATA02 Sharpness Gain
01H : 1 02H : 2 03H : 3 04H : 4
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 06H : Sharpness Gain Flag
010. COLOR GAIN DATA ********************************************************************** Function: This command controls the Color gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 04H : Color Gain Flag DATA02 Color Gain E0H : -32 : FFH : -01 00H : 0 01H : +01 : 20H : +32
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 04H : Color Gain Flag
011. TINT GAIN DATA ********************************************************************** Function: This command controls the Tint gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 05H : Color Gain Flag DATA02 Color Gain E0H : -32 :
FFH : -01 00H : 0 01H : +01 : 20H : +32
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 05H : Tint Gain Flag
* TINT Gain is from -22 (EAH) to +22 (16H) only during video.
012. PICTURE MODE SELECT ********************************************************************** Function: This command sets the Picture mode of the picture.
Command: DFH 80H 60H 0AH 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : NORMAL 02H : THEATER1 (not with a still picture of a PC) 03H : THEATER2 (not with a still picture of a PC) 04H : DEFAULT 05H : BRIGHT
Response: At the time of a success 7FH 60H 80H 0AH DATA00 CKS
Data Portion Contents
------------------------------------------------------------------- DATA00 01H : NORMAL 02H : THEATER1 03H : THEATER2 04H : DEFAULT 05H : BRIGHT
013. COLOR TEMP SELECT ********************************************************************** Function: This command sets the Color Temp mode of the picture.
Command: DFH 80H 60H 00H 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 00H : LOW 01H : MIDDLE 02H : HIGH 03H : MIDDLE LOW
Response: At the time of a success 7FH 60H 80H 00H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------- DATA00 00H : LOW 01H : MIDDLE 02H : HIGH 03H : MIDDLE LOW
014. RED GAIN DATA ********************************************************************** Function: This command controls the Red gain of the picture.
Command: DFH 80H 60H 7FH 04H DATA00 DATA01 DATA02 DATA03 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 01H : Red Gain Flag DATA02 Red Gain1 (Bias) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30
DATA03 Red Gain2 (Drive) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 01H : Red Gain Flag
015. GREEN GAIN DATA ********************************************************************** Function: This command controls the Green gain of the picture.
Command: DFH 80H 60H 7FH 04H DATA00 DATA01 DATA02 DATA03 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 02H : Green Gain Flag DATA02 Green Gain1 (Bias)
D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30
DATA03 Green Gain2 (Drive) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 02H : Green Gain Flag
016. BLUE GAIN DATA ********************************************************************** Function: This command controls the Blue gain of the picture.
Command: DFH 80H 60H 7FH 04H DATA00 DATA01 DATA02 DATA03 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 03H : Blue Gain Flag DATA02 Blue Gain1 (Bias) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30
DATA03 Blue Gain2 (Drive) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : User Picture Gain Flag DATA01 03H : Blue Gain Flag
018. BASS GAIN DATA ********************************************************************** Function: This command controls the Bass gain for the audio.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 05H : User Picture Gain Flag DATA01 03H : Bass Gain Flag DATA02 Bass Gain F3H : -13 : FFH : -01 00H : 0 01H : +01 : 0DH : +13
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 05H : User Picture Gain Flag DATA01 03H : Bass Gain Flag
019. TREBLE GAIN DATA ********************************************************************** Function: This command controls the Treble gain for the audio.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 05H : User Picture Gain Flag DATA01 04H : Treble Gain Flag DATA02 Treble Gain F3H : -13 : FFH : -01 00H : 0 01H : +01 : 0DH : +13
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 05H : User Picture Gain Flag DATA01 04H : Treble Gain Flag
020. BALANCE GAIN DATA ********************************************************************** Function: This command controls the Balance gain for the audio.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 05H : User Picture Gain Flag DATA01 02H : Balance Gain Flag DATA02 Balance Gain EAH : -22 : FFH : -01 00H : 0 01H : +01 : 16H : +22
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 05H : User Picture Gain Flag DATA01 02H : Balance Gain Flag
021. SCREEN MODE SELECT ********************************************************************** Function: This command sets the Screen mode of the picture.
Command: DFH 80H 60H 51H 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 02H : STADIUM 03H : ZOOM 03H : NORMAL 05H : FULL 06H : REAL 08H : UNDERSCAN 09H : 14:9 0AH : 2.35:1
Response: At the time of a success 7FH 60H 80H 51H 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------- DATA00 02H : STADIUM 03H : ZOOM 03H : NORMAL 05H : FULL 06H : REAL 08H : UNDERSCAN 09H : 14:9 0AH : 2.35:1
* Normally "08:UNDERSCAN" can not be selected
022. V.POSITION GAIN DATA ********************************************************************** Function: This command sets the V. Position gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 01H : V. Position Gain Flag DATA02 V. Position Gain C0H : -64 : FFH : -01 00H : 0 01H : +01 : 40H : +64
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 01H : V. Position Gain Flag
023. H.POSITION GAIN DATA ********************************************************************** Function: This command sets the H. Position gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 02H : H. Position Gain Flag DATA02 H. Position Gain 80H : -128 : FFH : -01 00H : 0 01H : +01 : 7FH : +127
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 02H : H. Position Gain Flag
024. V.HEIGHT GAIN DATA ********************************************************************** Function: This command sets the V. Height gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 07H : V. Height Gain Flag DATA02 V. Height Gain 00H : 0 : 40H : +64 Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 07H : V. Height Gain Flag
025. H.WIDTH GAIN DATA ********************************************************************** Function: This command sets the H. Width gain of the picture.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 08H : H. Width Gain Flag DATA02 H. Position Gain 00H : 0 : 40H : +64
Response: At the time of a success 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 08H : H. Width Gain Flag
026. AUTO PICTURE SELECT ********************************************************************** Function: This command sets the Auto Picture gain of the plasma.
Command: DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 09H : Auto Picture Select Flag DATA02 00H : ON 01H : OFF
Response: At the time of a success 7FH 60H 80H 7FH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 03H : User Picture Gain Flag DATA01 08H : Auto Picture Select Flag DATA02 00H : ON 01H : OFF
033. LONG LIFE SET (PDP SAVER Set) ********************************************************************** Function: The external control equipment sets the PLE, ORBITER, and INVERSE (inverse of image brightness) or WHITE of the plasma monitor.
Command: DFH 80H 60H 6BH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­DATA00 : PLE 01H : 100%(AUTO) 02H : 75%(LOCK1) 03H : 50%(LOCK2) 04H : 25%(LOCK3) DATA01 : INVERSE/WHITE 01H : INVERSE 02H : OFF 03H :WHITE DATA02 : ORBITER (PICTURE SHIFT) 01H : AUTO1 02H : OFF 03H : AUTO2
Response: At the time of a success: The plasma monitor returns the following ACK when setting the PLE, ORBITER, and INVERSE (inverse of image brightness) or WHITE:
3FH 60H 80H 6BH 00H CKS
035. ALL RESET ********************************************************************** Function: This command resets the user adjustments of the plasma.
Command: 1FH 80H 60H 54H 00H CKS
Response: At the time of a success 3FH 60H 80H 54H 00H CKS
039. BNC INPUT ********************************************************************** Function: This command sets the BNC Input for the incoming signal.
Command: DFH 80H 60H 8CH 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 BNC Select 01H : RGB 02H : Component
Response: At the time of a success 7FH 60H 80H 8CH 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------- DATA00 BNC Select 01H : RGB 02H : Component
042. FREQUENCY REQUEST ********************************************************************** Function: This command inquires the Horizontal Frequency, Vertical Frequency, Horizontal Sync Polarity, Vertical Sync Polarity, Mode and Resolution of the incoming signal.
Command: 1FH 80H 60H 26H 00H CKS
Response: At the time of a success 7FH 60H 80H 26H 0BH DATA00 to DATA0A CKS
Data Portion Contents
------------------------------------------------------------------­ Horizontal Frequency DATA00 Integer Part 00H : 0 (No Signal: 00H) : FFH : 255 DATA01 One Decimal Place 00H : 0 (No Signal: 00H) : 09H : 9 Vertical Frequency DATA02 Integer Part 00H : 0 (No Signal: 00H) : FFH : 255 DATA03 One Decimal Place 00H : 0 (No Signal: 00H) : 09H : 9 Horizontal Sync Polarity DATA04 00H : ­ 01H : Positive 02H : Negative
Vertical Sync Polarity DATA05 00H : ­ 01H : Positive 02H : Negative Mode DATA06 00H : No Signal - 01H-80H : RGB Signal (identification number of PC) 81H : Video Signal 3.58NTSC 82H : 4.43NTSC 83H : PAL 84H : PAL-M 85H : PAL-N 86H : PAL60 87H : SECAM 88H : B/W60 89H : B/W50 A0H : HD/DVD/DTV Signal 480I A1H : 480p A2H : 576I A3H : 576P A4H : 720P A5H : 1035I A6H : 1080I Resolution DATA 07 Dots (low-order byte) 00H : 0 (No Signal: 00H) : FFH : 255 DATA 08 Dots (high-order byte) 00H : 257 (No Signal: 00H) : FFH : 255 DATA 09 Lines (low-order byte) 00H : 0 (No Signal: 00H) : FFH : 255 DATA 10 Lines (high-order byte) 00H : 257 (No Signal: 00H) : FFH : 255
043. INPUT MODE REQUEST ********************************************************************** Function: This command sets the Screen mode of the picture.
Command: 1FH 80H 60H 41H 00H CKS
Response: At the time of a success 7FH 60H 80H 41H 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------- DATA00 Input Select 01H : VIDEO1*# 02H : VIDEO2*# 03H : VIDEO3* 04H : DVD/HD1* 05H : DVD/HD1# 05H : PC1* 06H : PC2*
06H : DVD/HD2# 07H : PC/RGB# 0AH : DVD (DVD1)* 0CH : HD2* 0DH : DVD2* 0EH : PC3* 0EH : DVD/HD3 (HDMI)# 0FH : DVD3 (SCART3)* 1AH : DVD/HD4 (HDMI)#
• * PX-42VM4/42VP4/42VP4D/42VM5/42VP5/42VR5/42XM2/42XM3/42XM4/42XM5
• * PX-50XM3/50XM4/50XM5/50XM6
• * PX-61XM2/61XM3/61XM4/60XM5
• # PX-42XR4/42XR5/50XR5/50XR6/61XR4/60XR5
44. VIDEO ADJUST REQUEST ********************************************************************** Function: The display returns the video adjustments information by the external control equipment’s request.
Command: 1FH 80H 60H 45H 00H CKS
Response: At the time of success 7FH 60H 80H 45H 0CH DATA00 to DATA0B CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 RED Gain (Bias) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30 DATA01 GREEN Gain (Bias) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30 DATA02 BLUE Gain (Bias) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30 DATA03 COLOR Gain E0H : -32 : FFH : -01 00H : 0 01H : +01 : 20H : +32 DATA04 TINT Gain E0H : -32 :
FFH : -01 00H : 0 01H : +01 : 20H : +32 DATA05 SHARPNESS Gain F0H : -16 : FFH : -01 00H : 0 01H : +01 : 10H : +16 DATA06 CONTRAST Gain CCH : -52 : FFH : -01 00H : 0 01H : +01 : 14H : +20 DATA07 BRIGHT Gain E0H : -32 : FFH : -01 00H : 0 01H : +01 : 20H : +32 DATA08 RED Gain (Drive) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30 DATA09 GREEN Gain (Drive) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30 DATA0A BLUE Gain (Drive) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30 DATA0B COLOR TEMP SELECT 00H: low 01H: middle 02H: high 03H: middle low
045. AUDIO SELECT REQUEST ********************************************************************** Function: This command inquires the audio and video combinations.
Command: 1FH 80H 60H 6FH 00H 6EH
Response: At the time of a success 7FH 60H 80H 61H 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 Audio1 01H-0CH : Visual Input Data DATA01 Audio2 01H-0CH : Visual Input Data DATA02 Audio3 01H-0CH : Visual Input Data
Visual Input Data 01H : VIDEO1*# 02H : VIDEO2*# 03H : VIDEO3* 04H : DVD/HD1* 05H : DVD/HD1# 05H : PC1* 06H : PC2* 06H : DVD/HD2*# 07H : PC/RGB*# 0AH : DVD (DVD1)* 0CH : HD2* 0DH : DVD2* 0EH : PC3* 0EH : DVD/HD3 (HDMI)# 0FH : DVD3 (SCART3)* 1AH : DVD/HD4 (HDMI)#
• * PX-42VM4/42VP4/42VP4D/42VM5/42VP5/42VR5/42XM2/42XM3/42XM4/42XM5
• * PX-50XM3/50XM4/50XM5/50XM6
• * PX-61XM2/61XM3/61XM4/60XM5
• # PX-42XR4/42XR5/50XR5/50XR6/61XR4/60XR5
046. FAILURE MODE REQUEST ********************************************************************** Function: This command inquires the detection of any failures within the plasma.
Command: 1FH 80H 60H 3FH 00H CKS
Response: At the time of a success 7FH 60H 80H 3FH 02H DATA00 DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 Failure Mode Bit 0 : PDP MODULE 0 : Abnormal 1 : Normal Bit 1 : fixed (backup) Bit 2 : TEMPERATURE 0 : Abnormal 1 : Normal Bit 3 : FAN 0 : Abnormal
1 : Normal Bit 4 : TEMPERATURE SENSOR 0 : Abnormal 1 : Normal Bit 5 : fixed (backup) Bit 6 : fixed (backup) Bit 7 : fixed (backup) DATA01 Failure Mode 2 Bit 0-7 : 1:fixed (backup)
052. RUNNING SENSE ********************************************************************** Function: This command acquires the operation mode of the plasma.
Command: 1FH 80H 60H 88H 00H CKS
Response: At the time of a success 7FH 60H 80H 88H 01H DATA CKS
Data Portion Contents
------------------------------------------------------------------­ DATA Status of operation Bit 7 : Fixed 0 = No execution(Normal condition)
Bit 6 : Fixed 0 = No execution(Normal condition)
Bit 5 : Fixed 0 = No execution(Normal condition)
Bit 4 : Fixed 0 = No execution(Normal condition)
Bit 3 : Fixed 0 = No execution(Normal condition)
Bit 2 : Power Status 0 = Power On 1 = Power Off (Standby)
Bit 1 : Fixed 1 = -
Bit 0 : Fixed 1 = -
056. MULTI MODE SELECT ********************************************************************** Function: This command selects the video wall configuration of the plasma.
Command: DFH 80H 60H 03H 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 SCREEN DIVIDER SETTING 01H : Single mode
02H : Multi mode 1 screens 03H : Multi mode 4 screens 04H : Multi mode 9 screens 05H : Multi mode 16 screens 06H : Multi mode 25 screens DATA01 POSITION OF DIVIDE 01H : Upper left selected (4 screens) 02H : Upper right selected (4 screens) 03H : Lower right selected (4 screens) 04H : Lower left selected (4 screens) 07H : Top left selected (9 screens) 08H : Top middle selected (9 screens) 09H : Top right selected (9 screens) 0AH : Middle left selected (9 screens) 0BH : Middle center selected (9 screens) 0CH : Middle right selected (9 screens) 0DH : Bottom left selected (9 screens) 0EH : Bottom middle selected (9 screens) 0FH : Bottom right selected (9 screens) 10H : position1(16 screens, refer to figure1) 11H : position2(16 screens, refer to figure1) 18H : position9(16 screens, refer to figure1) 19H : position10(16 screens, refer to figure1) 1FH : position16 (16 screens, refer to figure1) 20H : position1(25 screens, refer to figure2) 21H : position2(25 screens, refer to figure2) 29H : position10(25 screens, refer to figure2) 2AH : position11(25 screens, refer to figure2) 32H : position19(25 screens, refer to figure2) 33H : position20(25 screens, refer to figure2) 38H : position25(25 screens, refer to figure2)
DATA02 Disp Mode 00H : Split 01H : Blanking
Response: At the time of a success 7FH 60H 80H 03H 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 SCREEN DIVIDER SETTING 01H : Single mode 02H : Multi mode 1 screens 03H : Multi mode 4 screens 04H : Multi mode 9 screens 05H : Multi mode 16 screens 06H : Multi mode 25 screens DATA01 POSITION OF DIVIDE 01H : Upper left selected (4 screens) 02H : Upper right selected (4 screens) 03H : Lower right selected (4 screens) 04H : Lower left selected (4 screens) 07H : Top left selected (9 screens) 08H : Top middle selected (9 screens) 09H : Top right selected (9 screens) 0AH : Middle left selected (9 screens) 0BH : Middle center selected (9 screens) 0CH : Middle right selected (9 screens) 0DH : Bottom left selected (9 screens) 0EH : Bottom middle selected (9 screens) 0FH : Bottom right selected (9 screens) 10H : position1(16 screens, refer to figure1) 11H : position2(16 screens, refer to figure1) 18H : position9(16 screens, refer to figure1) 19H : position10(16 screens, refer to figure1)
1FH : position16 (16 screens, refer to figure1) 20H : position1(25 screens, refer to figure2) 21H : position2(25 screens, refer to figure2) 29H : position10(25 screens, refer to figure2) 2AH : position11(25 screens, refer to figure2) 32H : position19(25 screens, refer to figure2) 33H : position20(25 screens, refer to figure2) 38H : position25(25 screens, refer to figure2)
DATA02 Disp Mode 00H : Split 01H : Blanking
057. MULTI MODE Request ********************************************************************** Function: This command requests the video wall configuration of the plasma.
Command: 1FH 80H 60H 3BH 00H CKS
Response: At the time of a success 7FH 60H 80H 3BH 03H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 SCREEN DIVIDER SETTING 01H : Single mode 02H : Multi mode 1 screens 03H : Multi mode 4 screens 04H : Multi mode 9 screens 05H : Multi mode 16 screens 06H : Multi mode 25 screens DATA01 POSITION OF DIVIDE 01H : Upper left selected (4 screens) 02H : Upper right selected (4 screens) 03H : Lower right selected (4 screens) 04H : Lower left selected (4 screens) 07H : Top left selected (9 screens) 08H : Top middle selected (9 screens) 09H : Top right selected (9 screens) 0AH : Middle left selected (9 screens) 0BH : Middle center selected (9 screens) 0CH : Middle right selected (9 screens) 0DH : Bottom left selected (9 screens) 0EH : Bottom middle selected (9 screens) 0FH : Bottom right selected (9 screens) 10H : position1(16 screens, refer to figure1) 11H : position2(16 screens, refer to figure1) 18H : position9(16 screens, refer to figure1) 19H : position10(16 screens, refer to figure1) 1FH : position16 (16 screens, refer to figure1) 20H : position1(25 screens, refer to figure2) 21H : position2(25 screens, refer to figure2) 29H : position10(25 screens, refer to figure2) 2AH : position11(25 screens, refer to figure2) 32H : position19(25 screens, refer to figure2) 33H : position20(25 screens, refer to figure2) 38H : position25(25 screens, refer to figure2)
DATA02 Disp Mode 00H : Split 01H : Blanking
059. MULTI (SPLIT) SCREEN SELECT ********************************************************************** Function: This command selects either single mode, side-by-side or picture in picture of the plasma.
Command: DFH 80H 60H 07H 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00: 00H: Single Screen 01H: Side by Side 1 (Same Size Screen) 02H: Side-by-Side 2R (Left Screen smaller) 03H: Picture in Picture 1 (sub screen Bottom Left) with size1 04H: Picture in Picture2(sub screen Bottom Right) with size1 05H: Side-by-Side 2L (Left Screen Bigger) 06H: Picture in Picture 1(sub screen Bottom Left) with size2 07H: Picture in Picture 2(sub screen Bottom Right) with size2 08H: Picture in Picture 1(sub screen Bottom Left) with size3 09H: Picture in Picture 2(sub screen Bottom Right) with size3 0AH: Picture in Picture 1(sub screen Bottom Left) with size4 0BH: Picture in Picture 2(sub screen Bottom Right) with size4 41H: Picture in Picture 3(sub screen Top Right) with size1 42H: Picture in Picture 3(sub screen Top Right) with size2 43H: Picture in Picture 3(sub screen Top Right) with size3 44H: Picture in Picture 3(sub screen Top Right) with size4 45H: Picture in Picture 4(sub screen Top Left) with size1 46H: Picture in Picture 4(sub screen Top Left) with size2 47H: Picture in Picture 4(sub screen Top Left) with size3 48H: Picture in Picture 4(sub screen Top Left) with size4 49H: Side by Side 3 (Same Size Screen vertical expand) 4AH: Side by Side 4 R(Left Screen smaller vertical expand) 4BH: Side by Side 4 L(Left Screen Bigger vertical expand) 10H: SWAP A0H: PIP OFF A1H: PIP ON In case of Side by Side mode; 20H: Active Left 21H: Active Right In case of Picture in picture mode; 30H: Active Main 31H: Active Sub A2H:NORMAL(NO FADE IN/FADE OUT) A3H:FADE(FADE IN/FADE OUT)
Response: At the time of success 7FH 60H 80H 07H 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00: 00H: Single Screen 01H: Side by Side 1 (Same Size Screen) 02H: Side-by-Side 2R (Left Screen smaller) 03H: Picture in Picture 1 (sub screen Bottom Left) with size1 04H: Picture in Picture2(sub screen Bottom Right) with size1 05H: Side-by-Side 2L (Left Screen Bigger) 06H: Picture in Picture 1(sub screen Bottom Left) with size2 07H: Picture in Picture 2(sub screen Bottom Right) with size2 08H: Picture in Picture 1(sub screen Bottom Left) with size3 09H: Picture in Picture 2(sub screen Bottom Right) with size3 0AH: Picture in Picture 1(sub screen Bottom Left) with size4 0BH: Picture in Picture 2(sub screen Bottom Right) with size4 41H: Picture in Picture 3(sub screen Top Right) with size1 42H: Picture in Picture 3(sub screen Top Right) with size2 43H: Picture in Picture 3(sub screen Top Right) with size3 44H: Picture in Picture 3(sub screen Top Right) with size4
45H: Picture in Picture 4(sub screen Top Left) with size1 46H: Picture in Picture 4(sub screen Top Left) with size2 47H: Picture in Picture 4(sub screen Top Left) with size3 48H: Picture in Picture 4(sub screen Top Left) with size4 49H: Side by Side 3 (Same Size Screen vertical expand) 4AH: Side-by-Side 4R (Left Screen smaller vertical expand) 4BH: Side-by-Side 4L (Left Screen Bigger vertical expand) 10H: SWAP A0H: PIP OFF A1H: PIP ON In case of Side by Side mode; 20H: Active Left 21H: Active Right In case of Picture in picture mode; 30H: Active Main 31H: Active Sub A2H:NORMAL(NO FADE IN/FADE OUT) A3H:FADE(FADE IN/FADE OUT)
067. PICTURE MEMORY SELECT ********************************************************************** Function: This command selects the Picture Memory function of a plasma.
Command: DFH 80H 60H 38H 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00: MEMORY select 00H : OFF 01H : MEMORY1 02H : MEMORY2 03H : MEMORY3 04H : MEMORY4 05H : MEMORY5 06H : MEMORY6
Response: At the time of success 7FH 60H 80H 38H 01H CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00: 00H : OFF 01H : MEMORY1 02H : MEMORY2 03H : MEMORY3 04H : MEMORY4
068. PICTURE MEMORY SET ********************************************************************** Function: This command sets and reset the Picture Memory function of a plasma.
Command: DFH 80H 60H 25H 02H DATA00 DATA01 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00: 01H : SET 02H : RESET DATA01: MEMORY select
00H : OFF 01H : MEMORY1 02H : MEMORY2 03H : MEMORY3 04H : MEMORY4 05H : MEMORY5 06H : MEMORY6
Response: 7FH 60H 80H 25H 01H CKS
Data Portion Contents
------------------------------------------------------------------- DATA00: 01H : SET 02H : RESET
079. VOLUME GAIN REQUEST ********************************************************************** Function: This command inquires the volume gain for plasma.
Command: 1FH 80H 60H 0EH 00H CKS
Response: DFH 60H 80H 0EH 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------- DATA00: VOLUME Gain : 00H~2AH 00H : 0 0FH : 15 10H : 16 1FH : 31 2AH : 42 FFH : MUTE
082. SEAMLESS SWITCH SELECT ********************************************************************** Function: This command selects the seamless switch function of the plasma.
Command: DFH 80H 60H 7EH 01H DATA00 DATA01 DATA02 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00: SEAMLESS SWITCH 01H :OFF 02H :ON DATA01 : SELECT1 01H : Video1 02H : Video2 03H : Video3 05H : DVD/HD1 06H : DVD/HD2( SCART1/SCART2) 07H : RGB1 / PC1 08H : RGB2 / PC2 0CH : RGB3 / PC3 0DH : HD3(SCART3) DATA02 : SELECT2 01H : Video1
02H : Video2 03H : Video3 05H : DVD/HD1 06H : DVD/HD2( SCART1/SCART2) 07H : RGB1 / PC1 08H : RGB2 / PC2 0CH : RGB3 / PC3 0DH : HD3(SCART3)
Response: At the time of success ACK 7FH 60H 80H 7EH 01H DATA00 CKS
Data Portion Contents
------------------------------------------------------------------­ DATA00 01H : OFF 02H : ON
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use