Entry Level Installation projector
M Series
Designed for conference and classrooms
A powerhouse projector
packed with essential features
Essential Features for Educational Facilities
• Plug and Play intuitive setup and operation
• Bright images easily viewed in any application
• Versatile, color-coded connections to computer, video sources and
external monitor
• Automatic keystone correction technology instantly projects a square
image even when the projector is set up at a steep offset angle to the
screen
• AutoSense™ intuitively syncs the projector with most computer signals
and features one-touch image optimization
• One-touch source changes and complete menu control using the
intuitive projector keypad
• Powerful 20-watt speaker provides volume needed for large rooms
• High contrast images (10,000:1) from the latest Texas Instruments
DLP engine featuring BrilliantColor™ technology with improved color
accuracy
• With a 1080p native resolutions, high brightness of 4000 lumens and
patented NEC technologies, the M402H projector displaysimpressive
image quality
Advanced Networking Capabilities
Designed with the Environment in Mind
• Extended lamp life with ECO Mode™ technology increases
lamp life up to 8000 hours,
while lowering power consumption
• Power management enables projector to automatically
turn off when an incoming signal is not detected from any
of the inputs
• Auto Power On via the RGB (15-pin) input connector when
a signal is detected from a computer
• Carbon savings meter calculates the positive effects of
operating the projector in ECO Mode, which is encouraged
by an optional message at startup. A green ECO Mode
button on the remote control makes the switch easy.
• Quick start (3 to 4 seconds) lets you begin presenting in
seconds
• Sleep timer can be set to automatically turn off the
projector at set countdown times
• Low power consumption (0.2W in stand-by mode)
minimizes energy costs
• Integrated RJ45 connection for quick connection to the LAN (10/100 base-T capability)
• Remote diagnostics enable the user to monitor and make adjustments to the projector remotely
• PC CTL 4.0 controls the power switching input selection and other functions while managing lamp usage and a variety of other vital
information over the network. Email notification and projector scheduling for better asset management is included with the software.
• PC CTL 5.0 for MAC users
• Control and receive important broadcast messages via Crestron Roomview™
• Wireless Image Utility (WIU) sends images directly from an iPad to the projector (requires wireless LAN module NP02LM1)
• Simple Access Point Sending photos and documents have never been easier from a computer or iPad.
Wireless LAN
Image Express Lite
module (optional)
Dedicated projector software provides wired and wireless data and audio
transmission via peer-to-peer or over the network.
Loading...