NEC MAC2ATA User Manual
MC/AC Cable to T-Grid Clip–MAC2ATA
• Manufactured with stabilizer legs for virtually "wobble-free" support
• No tools required for installation
• Compliant with NEC® Article 300.4(d), allowing cable to be positioned a minimum of 1-1/4" from face of stud
• Compliant with CEC Rule 12-618 for support of MC/AC cable
Part Number MAC2ATA
Material Spring Steel
Finish nVent CADDY Armour
MC/AC Cable Size 14-2 to 10-3
Standard Packaging Quantity 100 pc
UPC 78285633067
Assemblies allow for support from most main and substructures.
NEC is a registered trademark of, and National Electrical Code (NEC) standard is a copyright of the National Fire Protection Association, Inc.
WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from
your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2020nVentAll rights reserved
nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates.
All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.
Loading...