NEC LD7213L, LD7213 Datasheet

DATA SHEET
HIGH POWER TRAVELING WAVE TUBE
FOR GROUND TERMINALS
LD7213, LD7213L
14 GHz, 300 W CW, CONDUCTION COOLING,
HIGH POWER GAIN, FLAT GAIN VARIATION

GENERAL DESCRIPTION

The NEC LD7213 and LD7213L are PPM-focused traveling wave-tubes designed for use as final amplifiers in the
earth-to-satellite communications transmitter.
These are capable of delivering an output power of 300 W over the range of 14.0 to 14.5 GHz and 13.75 to 14.5
GHz.
They provide a high power gain of 55 dB at 300 W output, and flat gain variation of 1.5 dB at any power level. LD7213 is fully compatible with TH3759K.

FEATURES

High Power Gain
The power gain is typically 58 dB at small signal level and 55 dB at 300 W level.
Simple Cooling System
The tubes are conduction-cooled, so that the cooling systems are greatly simplified.
PPM (Periodic Permanent Magnet) Focusing
The tubes are PPM (Periodic Permanent Magnet) -focused, eliminating entirely the focusing power supplies and interlock circuits.
Rugged Construction
The tubes are designed to be rugged, therefore they are suitable for transportable systems.
Long Life and High Stability
The tubes employ advanced impregnated cathodes with a low operating temperature for long life.
Microdischarge Free
The tubes are carefully designed to be free from microdischarge in the electron gun for long term operation, therefore they are suitable for digital communication service.
For safe use of microwave tubes, refer to NEC document “Safety instructions to all personnel handling electron tubes” (ET0048EJ∗V∗UM00)
The information in this document is subject to change without notice.
Document No. ET0191EJ2V1DS00 (2nd edition) Date Published August 1998 M Printed in Japan
©

GENERAL CHARACTERISTICS

ELECTRICAL
Frequency ……………………………………………… LD7213 : 14.0 to 14.5 GHz
Cathode ………………………………………………… Indirectly heated, Impregnated
Heater Voltage …………………………………… 6.1 V Heater Current …………………………………… 1.05 A
MECHANICAL
Dimensions …………………………………………… See Outline Focusing ……………………………………………… Periodic Permanent Magnet Electrical Connections ……………………………… AMP861647-8 RF Connections
Input ………………………………………………… SMA Female
Output ……………………………………………… Mates with UBR-120 Flange Mounting Position ……………………………………Any Weight ………………………………………………… 5 kg approx. Cooling ………………………………………………… Conduction
LD7213, LD7213L
LD7213L : 13.75 to 14.5 GHz
ABSOLUTE RATINGS (Note 1, 2 and 3)
ELECTRICAL
Heater Voltage……………………………………… 5.5 6.3 V Heater Surge Current …………………………… 2.5 A Heater Current ……………………………………… 1.6 A Heater Warm-up Time …………………………… 180 s Collector Voltage …………………………………… 3.5 4.6 kVdc Helix Voltage ……………………………………… 8.2 9.0 kVdc Cathode Current …………………………………… 260 mAdc Helix Current ……………………………………… 10 mAdc Collector Dissipation ……………………………… 1.2 kW Helix Dissipation …………………………………… 50 W RF Drive Power …………………………………… 5 mW Reflected Power …………………………………… 10 W Load VSWR ………………………………………… 2 : 1
MECHANICAL
Ambient Temperature …………………………… –40 +95 ˚C
Min. Max. Unit
2
Loading...
+ 2 hidden pages