NEC Express5800/T110g-E
System Configuration Guide
Introduction
This document contains product and configuration information that will enable you to configure your system. The
guide will ensure fast and proper configuration of your NEC Express5800 server.
April 17, 2015
Revision 5.0
NEC Corporation
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 2
Contents
TECHNICAL SPECIFICATION ........................................................................................ 3
Key Features .......................................................................................................................................... 3
Specification .......................................................................................................................................... 3
EXTERNAL VIEWS ......................................................................................................... 7
Front View .............................................................................................................................................. 7
Rear Views ............................................................................................................................................. 8
Dimensions (mm) .................................................................................................................................. 9
CONFIGURATION DIAGRAM ....................................................................................... 10
Expansion Slots .................................................................................................................................. 10
SERVER CONFIGURATION ......................................................................................... 11
1 Base Models ................................................................................................................................. 11
2 Processor ..................................................................................................................................... 11
3 Memory ......................................................................................................................................... 11
Maximum Available Memory .......................................................................................................... 12
4 Internal Hard Disk Drives ............................................................................................................ 13
4.1 RAID Configuration .............................................................................................................. 13
4.2 2.5-inch Drive Configuration ................................................................................................ 14
4.3 Hot plug 3.5-inch Drive Configuration ................................................................................. 19
4.4 Non-hot plug 3.5-inch Drive Configuration .......................................................................... 23
5 Internal Optical Drive ................................................................................................................... 25
6 Internal RDX / LTO Drives ........................................................................................................... 26
6.1 RDX/LTO Drive Selection .................................................................................................... 26
6.2 RDX/LTO Configuration ....................................................................................................... 26
7 PCI Card ........................................................................................................................................ 27
7.1 Network Interface Controller ................................................................................................ 27
7.2 SAS Controller ..................................................................................................................... 28
7.3 Serial Port Adapter .............................................................................................................. 28
8 Other Add-in Components .......................................................................................................... 28
8.1 Redundant Power Supply Module ....................................................................................... 28
8.2 Trusted Platform Module Kit ................................................................................................ 28
8.3 Internal Flash Memory ......................................................................................................... 29
8.4 Flash FDD............................................................................................................................ 29
8.5 Input Devices ....................................................................................................................... 29
9 Add-on Components ................................................................................................................... 30
9.1 Server Management License............................................................................................... 30
9.2 Rack Conversion Kit ............................................................................................................ 30
9.3 Dust Proof Kit ...................................................................................................................... 30
9.4 Medium and Cartridge ......................................................................................................... 30
REFERENCES............................................................................................................... 31
Server Management ............................................................................................................................ 31
OS Support Matrix for PCI Cards and Embedded Controllers ....................................................... 32
Supported PCI cards and Installable Slots....................................................................................... 32
Copyright Notice and Liability Disclaimer ........................................................................................ 33
REVISION HISTORY ..................................................................................................... 34
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 3
Technical Specification
Key Features
High performance with the latest Intel® Xeon® processor E3-1200 v3 processor family
Up to 32 GB of high speed DDR3-1600 memory
Full manageability by integrated EXPRESSSCOPE Engine 3
Function in maximum 40° C / 104° F ambient temperature
Specification
(1 / 2)
Model
T110g-E
Part Number
N8100-2189F, N8100-2190F, N8100-2257F, N8100-2258F
Processor
Type
Intel®
Celeron®
processor
G1840
Intel®
Pentium®
processor
G3240
Intel® Core™
i3-4350
processor
Intel® Xeon®
processor
E3-1220 v3
Clock speed
2.80 GHz
3.10 GHz
3.60 GHz
3.10 GHz
Number of Processors
1
Cache
2 MB
3 MB
4 MB
8 MB
Cores and Threads
2C / 2T
2C / 4T
4C / 4T
Chipset
Intel® C224 Chipset
Memory
Type
DDR3-1600 ECC Unbuffered DIMM
Standard Capacity
0 GB
Maximum Capacity
32 GB (4 x 8 GB)
Internal Storage
Standard Capacity
0 GB
Maximum Capacity
16 TB (4 x 4 TB)
Disk Controller
SATA : 6Gb/s (Integrated)
RAID
SATA : RAID 0/1/10 (Standard), RAID 5/6/50/60 (Optional)
SAS : RAID 0/1/5/6/10/50/60 (Optional)
Hot Plug
Supported with hot plug drive bay
Optical Disk Drive
Optional
5-inch Media Bays
2
Disk Drive Bays
Hot plug 2.5-inch drive configuration: 8
Hot plug 3.5-inch drive configuration: 4
Non-hot plug 3.5-inch drive configuration: 4
Expansion Slots
Total: 4 slots available
1 PCIe 3.0 x16 (x16 connector)
1 PCIe 2.0 x4 (x8 connector)
2 PCIe 2.0 x1 (x8 connector)
Video
Controller (VRAM)
Integrated in Server Management Controller (32MB)
Resolution / Color
1280 x 1024 / 16.7M 2
Interfaces
1 VGA (15-pin mini D-sub,1 rear)
1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2 rear)
4 USB3.0 (1 front, 2 rear, 1 internal)
4 USB2.0 (1 front, 2 rear, 1 internal)
2 1000BASE-T LAN connector (RJ-45, 2 rear)
1 100BASE-TX LAN connector for Management (RJ-45, 1 rear)
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 4
Model
T110g-E
Server Management
EXPRESSSCOPE Engine 3
System Fan
Standard
Power Supply
1 x 400 Watt 80 PLUS® Gold certified non-hot plug PSU
1-2 x 450 Watt 80 PLUS® Platinum certified Hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
Power
Consumption
(Max. Config, Idling)
134 VA /
127 Watt
135 VA /
128 Watt
(Max. Config,
Operating)
271 VA /
256 Watt
271 VA /
257 Watt
300 VA /
283 Watt
Acoustic Noise
(Sound Pressure
Level) 3
Minimum Config.
38 dB
Maximum Config.
38 dB
Dimensions (W x D x H )
175.0 x 472.0 x 367.0 mm / 6.8 x 18.6 x 14.4 in
Weight (Minimum / Maximum)
11 kg / 19 kg, 24.25 lbs. / 41.88 lbs.
Temperature, Relative Humidity
(non-condensing)
Operating: 10° to 40° C / 50° to 104° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
Regulatory and Safety
FCC, CE, UL, CB, RoHS, BSMI, WEEE, CCC
Operating Systems and Virtualization
Software
Microsoft® Windows Server® 2008 x86 Standard
Microsoft® Windows Server® 2008 x86 Enterprise
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2012 Standard
Microsoft® Windows Server® 2012 Datacenter
Microsoft® Windows Server® 2012 R2 Standard
Microsoft® Windows Server® 2012 R2 Datacenter
Red Hat Enterprise Linux 5.10 or later 4
Red Hat Enterprise Linux 5.10 or later (EM64T) 4
Red Hat Enterprise Linux 6.5 or later 4
Red Hat Enterprise Linux 6.5 or later (EM64T) 4
Red Hat Enterprise Linux 7.0 or later 4
VMware ESXi™ 5.1 Update 1 or later 5
VMware ESXi™ 5.5 Update 1
5
VMware ESXi™ 6.0 5
1
Embedded SATA RAID controller is supported only on limited OS.
2
Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors.
3
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating
environment.
4
For Linux support, contact your sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
5
VMware ESXi is supported only on Core and Xeon processor systems.
(2 / 2)
Model
T110g-E
Part Number
N8100-2189F, N8100-2190F, N8100-2257F, N8100-2258F
Processor
Type
Intel® Xeon®
processor
E3-1231 v3
Intel® Xeon®
processor
E3-1271 v3
Clock speed
3.40 GHz
3.60GHz
Number of Processors
1
Cache
8 MB
Cores and Threads
4C / 8T
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 5
Model
T110g-E
Chipset
Intel® C224 Chipset
Memory
Type
DDR3-1600 ECC Unbuffered DIMM
Standard Capacity
0 GB
Maximum Capacity
32 GB (4 x 8 GB)
Internal Storage
Standard Capacity
0 GB
Maximum Capacity
16 TB (4 x 4 TB)
Disk Controller
SATA : 6Gb/s (Integrated)
RAID
SATA : RAID 0/1/10 (Standard), RAID 5/6/50/60 (Optional)
SAS : RAID 0/1/5/6/10/50/60 (Optional)
Hot Plug
Supported with hot plug drive bay
Optical Disk Drive
Optional
5-inch Media Bays
2
Disk Drive Bays
Hot plug 2.5-inch drive configuration: 8
Hot plug 3.5-inch drive configuration: 4
Non-hot plug 3.5-inch drive configuration: 4
Expansion Slots
Total: 4 slots available
1 PCIe 3.0 x16 (x16 connector)
1 PCIe 2.0 x4 (x8 connector)
2 PCIe 2.0 x1 (x8 connector)
Video
Controller (VRAM)
Integrated in Server Management Controller (32MB)
Resolution / Color
1280 x 1024 / 16.7M 2
Interfaces
1 VGA (15-pin mini D-sub,1 rear)
1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2 rear)
4 USB3.0 (1 front, 2 rear, 1 internal)
4 USB2.0 (1 front, 2 rear, 1 internal)
2 1000BASE-T LAN connector (RJ-45, 2 rear)
1 100BASE-TX LAN connector for Management (RJ-45, 1 rear)
Server Management
EXPRESSSCOPE Engine 3
System Fan
Standard
Power Supply
1 x 400 Watt 80 PLUS® Gold certified non-hot plug PSU
1-2 x 450 Watt 80 PLUS® Platinum certified Hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
Power
Consumption
(Max. Config, Idling)
135 VA /
128 Watt
(Max. Config,
Operating)
308 VA /
293 Watt
309 VA /
294 Watt
Acoustic Noise
(Sound Pressure
Level) 3
Minimum Config.
38 dB
Maximum Config.
38 dB
Dimensions (W x D x H )
175.0 x 472.0 x 367.0 mm / 6.8 x 18.6 x 14.4 in
Weight (Minimum / Maximum)
11 kg / 19 kg, 24.25 lbs. / 41.88 lbs.
Temperature, Relative Humidity
(non-condensing)
Operating: 10° to 40° C / 50° to 104° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
Regulatory and Safety
FCC, CE, UL, CB, RoHS, BSMI, WEEE, CCC
Operating Systems and Virtualization
Software
Microsoft® Windows Server® 2008 x86 Standard
Microsoft® Windows Server® 2008 x86 Enterprise
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2012 Standard
Microsoft® Windows Server® 2012 Datacenter
Microsoft® Windows Server® 2012 R2 Standard
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 6
Model
T110g-E
Operating Systems and Virtualization
Software
(cont’d)
Microsoft® Windows Server® 2012 R2 Datacenter
Red Hat Enterprise Linux 5.10 or later 4
Red Hat Enterprise Linux 5.10 or later (EM64T) 4
Red Hat Enterprise Linux 6.5 or later 4
Red Hat Enterprise Linux 6.5 or later (EM64T) 4
Red Hat Enterprise Linux 7.0 or later 4
VMware ESXi™ 5.1 Update 1 or later
VMware ESXi™ 5.5 Update 1
VMware ESXi™ 6.0
1
Embedded SATA RAID controller is supported only on limited OS.
2
Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors.
3
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating
environment.
4
For Linux support, contact your sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 7
External Views
Front View
With Front bezel
Hot Plug 2.5-inch Drive Configuration
Hot Plug 3.5-inch Drive Configuration
Non-hot Plug 3.5-inch Drive Configuration
Legend
A.
Power Button
G.
Drive Bay Cover Key
B.
Power LED
H.
Drive Bay Cover
C.
Hard Drive Activity LED
I.
5.25-inch Media Bay 2
D.
System Status LED
J.
5.25-inch Media Bay 1
E.
USB 3.0 Connector
K.
Optical Disk Drive
F.
USB 2.0 Connector
F.
USB 2.0 Connector
A
D
C
B
H
E
F
G
K
J
I
K
J
I
K
J
I
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 8
Rear Views
Hot Plug Power Supply Configuration
Non-hot Plug Power Supply Configuration
Legend
A.
Serial Port (A) Connector
F.
USB 3.0 Connectors
B.
VGA Connector
G.
Management LAN Connector
C.
BMC Reset Switch
H.
LAN Connectors
D.
Dump (NMI) Switch
I.
PCI Slots (Full Height)
E.
USB 2.0 Connectors
J.
AC Inlet
D
C
B
A
J
E
F
G
H
I
J
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 9
Dimensions (mm)
Standard Bezel
Non-redundant Power Configuration
Redundant Power Configuration
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 10
Configuration Diagram
Legend: Standard components Mandatory components
Expansion Slots
Legend
#1
PCIe 2.0 x1, x8 connector, Full Height, up to 168mm length
#2
PCIe 2.0 x1, x8 connector, Full Height, up to 168mm length
#3
PCIe 3.0 x16, x16 connector, Full Height, up to 312mm length
#4
PCIe 2.0 x4, x8 connector, Full Height, up to 168mm length
Slot #4
Slot #3
Slot #2
Slot #1
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 11
Server Configuration
1 Base Models
Product Name / Description
Part Number
NEC Express5800/T110g-E
no CPU, no RAM, no Drive Cage, no HDD, no Optiocal Drive
Including:
400 Watt non-hot plug power supply, EXPRESSBUILDER DVD, Keyboard, Mouse
N8100-2189F
NEC Express5800/T110g-E
no CPU, no RAM, no Drive Cage, no HDD, no Optiocal Drive
Including:
1x 450 Watt hot plug power supply, EXPRESSBUILDER DVD, Keyboard, Mouse
N8100-2190F
NEC Express5800/T110g-E
no CPU, no RAM, no Drive Cage, no HDD, no Optiocal Drive, no Keyboard, no Mouse
Including:
400 Watt non-hot plug power supply, EXPRESSBUILDER DVD,
N8100-2257F
NEC Express5800/T110g-E
no CPU, no RAM, no Drive Cage, no HDD, no Optiocal Drive, no Keyboard, no Mouse
Including:
1x 450 Watt hot plug power supply, EXPRESSBUILDER DVD
N8100-2258F
2 Processor
Available sockets: 1
Category
Product Name / Description
Part Number
Processors
Required
Celeron G1840 Processor Kit
Intel® Celeron ® Processor G1840 (2.80 GHz, 2C/2T, 2 MB)
N8101-737F
Pentium G3240 Processor Kit
Intel® Pentium ® Processor G3240 (3.10 GHz, 2C/2T, 3 MB)
N8101-738F
Core i3-4350 Processor Kit
Intel® Core™ i3-4350 Processor (3.60GHz, 2C/4T, 4 MB)
N8101-739F
Xeon E3-1220 v3 Processor Kit
Intel® Xeon ® Processor E3-1220 v3 (3.10 GHz, 4C/4T, 8 MB)
N8101-626F
Xeon E3-1231 v3 Processor Kit
Intel® Xeon ® Processor E3-1231 v3 (3.40 GHz, 4C/8T, 8 MB)
N8101-741F
Xeon E3-1271 v3 Processor Kit
Intel® Xeon ® Processor E3-1271 v3 (3.60 GHz, 4C/8T, 8 MB)
N8101-743F
NOTE:
One processor kit from above must be installed.
VMware ESXi is supported only on Core and Xeon processor systems.
3 Memory
Available slots: 4
Product Name / Description
Part Number
4GB DDR3-1600 UNB Memory Kit
4GB Unbuffered ECC DIMM, DDR3L-1600(PC3L-12800)
N8102-524F
8GB DDR3-1600 UNB Memory Kit
8GB Unbuffered ECC DIMM, DDR3L-1600(PC3L-12800)
N8102-525F
NOTE:
Minimum one memory kit must be installed.
To install by double of memory kit is recommended in order to increase memory transfer
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 12
speed by dual-channel symmetric configuration.
Actual memory speed drops to 1333 MHz when you choose Pentium Processor or Celeron
Processor.
The memory requirement for installing VMware ESXi™ are below:
- VMware ESXi 5.1 : at least 3 GB
- VMware ESXi 5.5 : at least 5 GB
- VMware ESXi 6.0 : at least 5 GB
Maximum Available Memory
See the table below for the maximum memory size that you can actually use on your system.
The maximum available memory is less than the maximum physical memory supported by your system
because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary
depending on the type and the number of PCI cards you are using.
Maximum Memory Size Supported by Operating Systems
Maximum Available Memory
Microsoft Windows Server 2008 Standard
4 GB
4 GB( HW-DEP enabled)
App. 3.5 GB (HW-DEP disabled)
Microsoft Windows Server 2008 R2 Standard 1
32 GB
32 GB
Microsoft Windows Server 2008 Enterprise
64 GB
32 GB
Microsoft Windows Server 2008 R2 Enterprise1
2 TB
32 GB
Microsoft Windows Server 2012 Standard 1
Microsoft Windows Server 2012 Datacenter 1
Microsoft Windows Server 2012 R2 Standard 1
Microsoft Windows Server 2012 R2 Datacenter 1
4 TB
32 GB
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
16 GB
16 GB
Red Hat Enterprise Linux 5 (EM64T)
1 TB
32 GB
Red Hat Enterprise Linux 6 (x86_64)
Red Hat Enterprise Linux 7
3 TB
32 GB
VMware ESXi 5.1 2
2 TB
32 GB
VMware ESXi 5.5 2
4 TB
32 GB
VMware ESXi 6.0 3
6 TB
32 GB
1
The maximum available memory size of Hyper-V systems are below:
- Windows Server 2008 R2 Standard : 32 GB
- Windows Server 2008 R2 Enterprise : 1TB
- Windows Server 2012 and Windows Server 2012 R2 : 4 TB
2
Up to 1TB of main memory is available to each virtual machine.
3
Up to 4TB of main memory is available to each virtual machine.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 13
4 Internal Hard Disk Drives
4.1 RAID Configuration
Refer to the section in accordance with your disk form factor and RAID configuration
4.1.1 2.5-inch Drive
NOTE:
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS
Support Matrix for PCI Cards and Embedded Controllers.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed in a system.
All drives within a RAID array should be of the same capacity and rotation speed.
4.1.2 Hot plug 3.5-inch Drive
Non-RAID
RAID 5/6/50/60
0 MB Cache
1GB Cache
/ Battery
512 MB Cache
Refer to 4.2.1
Refer to 4.2.3
Refer to 4.2.5
Refer to 4.2.6
RAID 0/1
SATA
SAS, SATA
SAS, SATA
SAS, SATA
Available Interface
Embedded SATA
RAID Controller
Optional RAID
Controller
Refer to 4.2.2
SATA
512 MB Cache
Refer to 4.2.4
SAS, SATA
1GB Cache
/ CacheVault
Refer to 4.2.7
SAS, SATA
Non-RAID
RAID 5/6/50/60
0 MB Cache
1GB Cache
/ Battery
512 MB Cache
Refer to 4.3.1
Refer to 4.3.3
Refer to 4.3.5
Refer to 4.3.6
RAID 0/1
SATA
SATA
SATA
SATA
Available Interface
Embedded SATA
RAID Controller
Optional RAID
Controller
Refer to 4.3.2
SATA
512 MB Cache
Refer to 4.3.4
SATA
1GB Cache
/ CacheVault
Refer to 4.3.7
SATA
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 14
NOTE:
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS
Support Matrix for PCI Cards and Embedded Controllers.
Embedded SATA RAID Controller does not support RAID 10 configured with 2TB or more HDDs.
All hard drives within a RAID array should be of the same capacity and rotation speed.
4.1.3 Non-hot plug 3.5-inch Drive
NOTE:
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS
Support Matrix for PCI Cards and Embedded Controllers.
All hard drives within a RAID array should be of the same capacity and rotation speed.
4.2 2.5-inch Drive Configuration
4.2.1 Embedded SATA non-RAID Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4x 6Gb/s SATA
(Standard)
Cable
Internal SATA Cable
Mini-SAS to mini-SAS
(Standard)
Drive Cage
Required
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
N8154-55F
Drive
4 slots
available
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-452
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-453
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-454
NOTE
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.
Non-RAID
RAID 5/6/50/60
0 MB Cache
1GB Cache
/ Battery
512 MB Cache
Refer to 4.4.1
Refer to 4.4.3
Refer to 4.4.5
Refer to 4.4.6
RAID 0/1
SATA
SATA
SATA
SATA
Available Interface
Embedded SATA
RAID Controller
Optional RAID
Controller
Refer to 4.4.2
SATA
512 MB Cache
Refer to 4.4.4
SATA
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 15
4.2.2 Embedded SATA RAID Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4x 6Gb/s SATA, RAID0/1/10 capable
(Standard)
Cable
Internal SATA Cable
miniSAS to miniSAS
(Standard)
Drive Cage
Required
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
N8154-55F
Drive
4 slots
available
SATA
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-452
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-453
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-454
NOTE
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS
Support Matrix for PCI Cards and Embedded Controllers.
All hard drives within a RAID array should be of the same capacity.
4.2.3 RAID 0/1 Controller without Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (0MB, RAID 0/1)
LSI MegaRAID SAS 9240-8i
RAID0/1/10, no memory cache, Int. 8, PCIe 2.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-171
Cable
Internal SATA Cable
Mini-SAS to mini-SAS
(Standard)
Internal SAS/SATA Cable
Mini-SAS to mini-SAS, for 5th - 8th hard drives
K410-294(00)
Drive Cage
Required
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
N8154-55F
Drive
8 slots
available
SAS
HDD
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-444
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-445
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-446
900GB HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-447
1.2TB HDD
1x 1.2 TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-448
146.5GB HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-449
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-450
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-451
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-522
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-452
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-453
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-454
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 16
NOTE:
All drives within a RAID array should be of the same type, capacity and rotation speed..
4.2.4 RAID 0/1 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1)
LSI MegaRAID SAS 9272-8i
RAID0/1/10, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA
6Gb/s
N8103-172
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
Cable
Internal SAS/SATA Cable
Mini-SAS to mini-SAS
(Standard)
Internal SAS/SATA Cable
Mini-SAS to mini-SAS, for 5th - 8th hard drives
K410-294(00)
Drive Cage
Required
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
N8154-55F
Drive
8 slots
available
SAS
HDD
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-444
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-445
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-446
900GB HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-447
1.2TB HDD
1x 1.2 TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-448
146.5GB HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-449
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-450
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-451
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-522
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-452
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-453
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-454
SAS
SSD
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-711
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-712
NOTE:
All drives within a RAID array should be of the same type, capacity and rotation speed.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 17
4.2.5 RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-173
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
Cable
Internal SAS/SATA Cable
Mini-SAS to mini-SAS
(Standard)
Internal SAS/SATA Cable
Mini-SAS to mini-SAS, for 5th - 8th hard drives
K410-294(00)
Drive Cage
Required
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
N8154-55F
Drive
8 slots
available
SAS
HDD
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-444
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-445
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-446
900GB HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-447
1.2TB HDD
1x 1.2 TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-448
146.5GB HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-449
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-450
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-451
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-522
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-452
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-453
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-454
SAS
SSD
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-711
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-712
NOTE:
All drives within a RAID array should be of the same type, capacity and rotation speed.
4.2.6 RAID 5/6 Controller with 1 GB Cache/Battery
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-174
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 18
SSD Caching
Recommended
MegaRAID CacheCade
for LSI MegaRAID SAS
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to
512 GB.
N8103-156
Cable
Internal SAS/SATA Cable
Mini-SAS to mini-SAS
(Standard)
Internal SAS/SATA Cable
Mini-SAS to mini-SAS, for 5th - 8th hard drives
K410-294(00)
Drive Cage
Required
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
N8154-55F
Drive
8 slots
available
SAS
HDD
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-444
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-445
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-446
900GB HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-447
1.2TB HDD
1x 1.2 TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-448
146.5GB HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-449
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-450
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-451
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-522
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-452
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-453
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-454
SAS
SSD
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-711
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-712
NOTE:
All drives within a RAID array should be of the same type, capacity and rotation speed.
4.2.7 RAID 5/6 Controller with 1 GB Cache/CacheVault
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9270CV-8i (with CV) RAID0/1/5/6/10/50/60,
1GB Cache, Int. 8ports, PCIe 3.0(x8), 6Gb/s, flash cache
protection modules included
N8103-168
SSD Caching
Recommended
MegaRAID CacheCade
for LSI MegaRAID SAS
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to
512 GB.
N8103-156
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 19
Cable
Internal SAS/SATA Cable
Mini-SAS to mini-SAS
(Standard)
Internal SAS/SATA Cable
Mini-SAS to mini-SAS, for 5th - 8th hard drives
K410-294(00)
RAID Controller
Installation Kit
Required
RAID Controller Instllation Kit
For LSI MegaRAID SAS 9270CV-8i
K410-328(00)
Drive Cage
Required
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
N8154-55F
Drive
8 slots
available
SAS
HDD
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-444
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-445
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-446
900GB HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-447
1.2TB HDD
1x 1.2 TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8150-448
146.5GB HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-449
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-450
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-451
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
N8150-522
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-452
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-453
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-454
SAS
SSD
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-711
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-712
NOTE:
All drives within a RAID array should be of the same type, capacity and rotation speed.
4.3 Hot plug 3.5-inch Drive Configuration
4.3.1 Embedded SATA non-RAID Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4x 6Gb/s SATA
(Standard)
Cable
Internal SAS/SATA Cable
miniSAS to miniSAS
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch hot plug drive bays
N8154-54F
Drive
4 slots available
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-455
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-456
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 20
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-457
NOTE
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.
4.3.2 Embedded SATA RAID Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4x 6Gb/s SATA, RAID0/1/10 capable
(Standard)
Cable
Internal SAS/SATA Cable
miniSAS to miniSAS
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch hot plug drive bays
N8154-54F
Drive
4 slots available
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-455
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-456
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-457
3TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-458
4TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-459
NOTE:
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS
Support Matrix for PCI Cards and Embedded Controllers.
All hard drives within a RAID array should be of the same capacity.
Embedded SATA RAID Controller does not support RAID 10 configured with 2TB or more HDDs.
4.3.3 RAID 0/1 Controller without Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (0MB, RAID 0/1)
LSI MegaRAID SAS 9240-8i
RAID0/1/10, no cache memory, Int. 8, PCIe 2.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-171
Cable
Internal SAS/SATA Cable
miniSAS to miniSAS
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch hot plug drive bays
N8154-54F
Drive
4 slots available
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-455
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-456
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-457
NOTE:
All hard drives within a RAID array should be of the same capacity.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 21
4.3.4 RAID 0/1 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1)
LSI MegaRAID SAS 9272-8i
RAID0/1/10, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA
6Gb/s
N8103-172
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
Cable
Internal SAS/SATA Cable
miniSAS to miniSAS
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch hot plug drive bays
N8154-54F
Drive
4 slots available
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-455
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-456
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-457
3TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-458
4TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-459
NOTE:
All hard drives within a RAID array should be of the same capacity.
4.3.5 RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-173
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
Cable
Internal SAS/SATA Cable
miniSAS to 4xSingle SATA
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch hot plug drive bays
N8154-54F
3.5-inch Drive
4 slots available
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-455
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-456
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-457
3TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-458
4TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-459
NOTE
All hard drives within a RAID array should be of the same capacity.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 22
4.3.6 RAID 5/6 Controller with 1GB Cache/Battery
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-174
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
Cable
Internal SAS/SATA Cable
miniSAS to 4xSingle SATA
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch hot plug drive bays
N8154-54F
Drive
4 slots available
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-455
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-456
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-457
3TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-458
4TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-459
NOTE
All hard drives within a RAID array should be of the same capacity.
4.3.7 RAID 5/6 Controller with 1GB Cache/CacheVault
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9270CV-8i (with CV) RAID0/1/5/6/10/50/60,
1GB Cache, Int. 8ports, PCIe 3.0(x8), 6Gb/s, flash cache
protection modules included
N8103-168
Cable
Internal SAS/SATA Cable
miniSAS to miniSAS
(Standard)
RAID Controller
Installation Kit
Required
RAID Controller Instllation Kit
For LSI MegaRAID SAS 9270CV-8i
K410-328(00)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch hot plug drive bays
N8154-54F
Drive
4 slots available
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-455
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-456
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-457
3TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-458
4TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-459
NOTE
All hard drives within a RAID array should be of the same capacity.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 23
4.4 Non-hot plug 3.5-inch Drive Configuration
4.4.1 Embedded SATA non-RAID Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4x 6Gb/s SATA
(Standard)
Cable
Internal SAS/SATA Cable
miniSAS to 4x SingleSATA
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch non-hot plug drive bays
N8154-53F
Drive
4 slots available
500GB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-460
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-461
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-462
4.4.2 Embedded SATA RAID Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4x 6Gb/s SATA, RAID0/1/10 capable
(Standard)
Cable
Internal SAS/SATA Cable
miniSAS to 4x SingleSATA
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch non-hot plug drive bays
N8154-53F
Drive
4 slots available
500GB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-460
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-461
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-462
3TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-463
4TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-464
NOTE:
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS
Support Matrix for PCI Cards and Embedded Controllers.
All hard drives within a RAID array should be of the same capacity.
Embedded SATA RAID Controller does not support RAID 10 configured with 2TB or more HDDs.
4.4.3 RAID 0/1 Controller without Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (0MB, RAID 0/1)
LSI MegaRAID SAS 9240-8i
RAID0/1/10, no cache memory, Int. 8, PCIe 2.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-171
Cable
Required
RAID LED Cable
K410-316(00)
Cable
Internal SAS/SATA Cable
miniSAS to 4x SingleSATA
(Standard)
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 24
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch non-hot plug drive bays
N8154-53F
Drive
4 slots available
500GB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-460
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-461
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-462
NOTE:
All hard drives within a RAID array should be of the same capacity.
4.4.4 RAID 0/1 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1)
LSI MegaRAID SAS 9272-8i
RAID0/1/10, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA
6Gb/s
N8103-172
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
Cable
Required
RAID LED Cable
K410-293(00)
Cable
Internal SAS/SATA Cable
miniSAS to 4x SingleSATA
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch non-hot plug drive bays
N8154-53F
Drive
4 slots available
500GB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-460
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-461
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-462
3TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-463
4TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-464
NOTE:
All hard drives within a RAID array should be of the same capacity.
4.4.5 RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-173
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
Cable
Required
RAID LED Cable
K410-293(00)
Cable
Internal SAS/SATA Cable
miniSAS to 4x SingleSATA
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch non-hot plug drive bays
N8154-53F
Drive
4 slots available
500GB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-460
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 25
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-461
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-462
3TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-463
4TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-464
NOTE:
All hard drives within a RAID array should be of the same capacity.
4.4.6 RAID 5/6 Controller with 1 GB Cache/Battery
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s,
SATA 6Gb/s
N8103-174
RAID BBU
Recommended
RAID Battery Backup Unit
for LSI MegaRAID SAS 9272-8i
N8103-155
Cable
Required
RAID LED Cable
K410-293(00)
Cable
Internal SAS/SATA Cable
miniSAS to 4x SingleSATA
(Standard)
Drive Cage
Required
3.5-inch Drive Cage
4 x 3.5-inch non-hot plug drive bays
N8154-53F
Drive
4 slots available
500GB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-460
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-461
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-462
3TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-463
4TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
N8150-464
NOTE:
All hard drives within a RAID array should be of the same capacity.
5 Internal Optical Drive
Category
Product Name / Description
Part Number
Internal
Required
Internal Slim DVD-ROM drive
Slim DVD-ROM drive
N8151-122
Internal DVD Super Multi Drive
Slim DVD Super Multi drive, not including writing software
N8151-107F
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 26
6 Internal RDX / LTO Drives
6.1 RDX/LTO Drive Selection
Refer to the section in accordance with your type of tape drives:
RDX: Refer to 6.2.1
LTO: Refer to 6.2.2
NOTE:
Tape devices cannot be directly connected to VMware ESXi servers. For an ESXi environment, it is
recommended to connect and configure an additional backup server via network.
6.2 RDX/LTO Configuration
6.2.1 RDX Drive
Category
Product Name / Description
Part Number
Controller
Internal USB Controller
1 x USB port
(Standard)
Cable
Required
Internal USB cable
1x Internal USB3.0 to 1x USB 3.0 device
K410-276(00)
Drive
1 bays available
Internal RDX (USB)
N8151-105
NOTE:
The USB bus operates in USB 2.0 mode if the system is running with Windows Server 2008 or Red
Hat Enterprise Linux 5 operating system.
6.2.2 LTO Drive
Category
Product Name / Description
Part Number
Controller
Required
SAS Controller
LSI SAS9212-4i4e Host Bus Adapter
6Gbps SAS, Int. 4, Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8
N8103-142
Cable
Required
Internal SAS Cable
1x 7-pin Single SATA to 1x SFF-8482 SAS
K410-217(00)
Drive
1 drive available
Internal LTO (SAS)
LTO3, Half height, Native capacity 400 GB
N8151-102
Internal LTO (SAS)
LTO4, Half height, Native capacity 800 GB
N8151-90
Internal LTO (SAS)
LTO5, Half height, Native capacity 1.5 TB
N8151-103
Internal LTO (SAS)
LTO6, Half height, Native capacity 2.5 TB
N8151-106
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 27
7 PCI Card
Please refer to Supported PCI cards and Installable Slots with regard to the position of PCI slot which
can mount PCI card supported.
7.1 Network Interface Controller
Category
Product Name / Description
Part Number
GbE 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
N8104-138
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
N8104-132
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0 x4
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
N8104-133
10GbE
Ctrlr
10GBASE Adapter (SFP+/2ch)
Broadcom NetXtreme II BCM957711 10G SFP+ Dual Port
Network Interface Card
PCIe 2.0 x8
NOTE:
- N8104-129 SFP+ Module is required to connect with an
optical cable.
- Up to 2 SFP+ Modules can be installed.
- Supports up to 2 adapters covering 10Gb Converged Network
Adapter and 10Gb Network Adapter.
N8104-128
Module
SFP+ Module (10G-SR)
1 x SFP+ Module for N8104-128
N8104-129
NIC Teaming feature – NIC Teaming and bonding features
See the table below for supported network interfaces and OS combinations.
Windows Server 2008 support BASP (Broadcom Advanced Server Program) or Intel PROSet teaming
while Windows Server 2012 or later and Linux support teaming with bonding function supported by OS.
Network Interface
Team
OS
1GbE NIC
Embedded 1GbE NIC/
N8104-138/-132/-133
Up to four teams per one system
Up to four ports per one team
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Red Hat Enterprise Linux
10GbE NIC
N8104-128
Up to two teams per one system
Up to two ports per one team
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Red Hat Enterprise Linux
NOTE:
Teaming feature is not supported on iSCSI interfaces.
The network interfaces for teaming must be the same.
When 10GbE and 1GbE LAN teams are mixed, the teams must be up to four per one system.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 28
Using iSCSI
See the table below for supported network interfaces and OS combinations.
Category
Network Interface
Operating Systems
1GbE
Embedded 1GbE NIC
Windows Server 2008 R2, Windows Serer 2012, Windows Server 2012
R2; Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
N8104-138
Windows Server 2008 R2, Windows Serer 2012, Windows Server 2012
R2; Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
N8104-132
Windows Server 2008 R2, Windows Serer 2012, Windows Server 2012
R2; Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
N8104-133
Windows Server 2008 R2, Windows Serer 2012, Windows Server 2012
R2; Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
10GbE
N8104-128
Wineos Server 2008, Windows Server 2008 R2, Windows Serer 2012,
Windows Server 2012 R2; Red Hat Enterprise Linux 5, Red Hat Enterprise
Linux 6, VMware
NOTE:
NIC Teaming feature is not supported on iSCSI interfaces.
7.2 SAS Controller
Product Name / Description
Part Number
SAS Controller
LSI SAS9212-4i4e Host Bus Adapter
6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8
N8103-142
7.3 Serial Port Adapter
Product Name / Description
Part Number
Serial Port Adapter
Serial port fixed to PCI bracket
N8117-01A
NOTE:
Up to one Serial Port Adapter can be installed.
8 Other Add-in Components
8.1 Redundant Power Supply Module
Available slots: 1
Product Name / Description
Part Number
450W Hot Plug Power Supply
1 x 450 Watt 80 PLUS® Platinum for N8100-2190F and N8100-2258F
N8181-86F
8.2 Trusted Platform Module Kit
Product Name / Description
Part Number
Trusted Platform Module Kit
TPM 1.2 module
N8115-15
NOTE:
The kit is not available in China.
The kit is not removable after attachment.
"TPM Support" in BIOS setup menu must be activated prior to use of this kit.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 29
To use Windows BitLocker drive encryption, be sure to keep the "recovery password" of BitLocker
function. The recovery password is required to restore data for hardware replacement during a
system error.
8.3 Internal Flash Memory
Product Name / Description
Part Number
Internal Flash Memory
Internal flash memory to enable software and tools in the EXPRESSBUILDR DVD without
DVD media
NOTE:
- Before use, software and tools must be copied from the EXPRESSBUILDER DVD to the
flash memory.
- The following operations can be performed with the flash memory:
- Installation of Windows server with express setup
- Installation of Starter Pack—the package of NEC qualified drivers and system setting
tools
- Installation of NEC ESMPRO Agent and Universal RAID Utility
- Performance of the Test and Diagnosis Tool
N8115-14
8.4 Flash FDD
Choose the Flash FDD if you need to prepare an alternative device for a floppy drive.
Product Name / Description
Part Number
Flash FDD
USB flash emulating USB floppy disk, Native capacity 1.44 MB
N8160-96
NOTE:
Up to one derive can be connected
8.5 Input Devices
Product Name / Description
Part Number
Keyboard and Mouse Pack (US)
1 x 104-keys White USB keyboard, 1 x USB White Optical Wheel Mouse
(Standard in some
models)
NOTE:
For keyboard and mouse packs not listed above, contact your sales representative.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 30
9 Add-on Components
9.1 Server Management License
The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the
standard management features. For more extensive remote KVM and remote media features, choose the
following kit.
Product Name / Description
Part Number
Remote KVM and Media License Kit
License for one server.
Remote KVM and remote media are enabled regardless of OS status.
Remote KVM:
- Displays a graphics console on the web browser of the remote terminal (PC/server).
- Controls keyboard and mouse via the remote terminals' web browser
Remote media:
Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals
(PC/server) as if accessing the local drives.
N8115-04
NOTE:
Remote KVM and remote media features are not available for virtual machines.
9.2 Rack Conversion Kit
Product Name / Description
Part Number
Rack Conversion Kit
Convert to 4U form factor
N8143-93
9.3 Dust Proof Kit
The server supports the dust resistant feature. Choose the following kit to install the system in dusty
places.
Category
Product Name / Description
Part Number
Front Bezel
Dust Proof Bezel with Sensor
Including 1 set of filter replacement sensors, 1 set of dust proof
filters
N8146-61
Filter
Dust proof filter (5 pcs.)
For N8146-44 Dust Proof filter
Removal capacity of particles : Up to 1 μm-sized
N8147-27
9.4 Medium and Cartridge
Category
Product Name
Drive supported
Part Number
RDX
HDD
RDX Cartridge (320GB)
N8151-105
N8153-01
RDX Cartridge (500GB)
N8151-105
N8153-02
RDX Cartridge (1TB)
N8151-105
N8153-03
RDX Cartridge (2TB)
N8151-105
N8153-08
SSD
RDX Cartridge (SSD/128GB)
N8151-105
N8153-06
RDX Cartridge (SSD/256GB)
N8151-105
N8153-07
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 31
References
Server Management
The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Standard
With Remote KVM
and Media License
kit
Hardware
monitoring
Temperature/hard drive1/fan/voltage/power
consumption/ System LAN/degeneration/
(memory/hard drive1)
Hardware configuration information collection
Hardware event log collection
Boot monitoring
BIOS/POST stall, Booting, OS stall, shutdown
3
3
Alerting
HW error, Boot error and OS panic
(by SNMP, E-Mail)
Remote KVM
(via LAN)
POST/BIOS setup, ROM utility
2
Panic screen, Boot screen
2,4,5
CUI-based screen (OS console)
2,5
GUI-based screen (OS console)
- Remote Screen Video Capture
-
Remote control
(via LAN)
Remote reset/power on-off/ dump
Remote Power Capping
BIOS/BMC FW update
Remote BIOS setup(partial configuration only)
OS shutdown
3
3
Remote media (CD/DVD/FD/USB)
-
CLP (Command Line Protocol) (DMTF compliant)
Remote control via Web browser (multi user login
at the same time)
Scheduling (without UPS, require NEC ESMPRO
Manager)
3
3
Maintenance
EXPRESSSCOPE® Profile key
(Backup/restore BIOS/BMC setup information)
Others
Set automatic IP address via DNS/DHCP
LDAP/Active Directory verification/user control
Clock synchronization of main unit and the RTC
Access log collection
Industry
Standard
IPMI support
2.0
2.0
1
The feature is not supported on non-hot plug 3.5-inch drive.
2
The optional serial port is not available when using this feature.
3
The feature is not supported on VMware systems.
4
Monitoring boot screens is not supported on VMware systems.
5
In VMware systems, only the direct console user interface is supported.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 32
OS Support Matrix for PCI Cards and Embedded Controllers
Part Number
Product Name
WS 2012 R2
WS 2012
WS 2008 R2
WS 2008
RHEL 7
RHEL 6
RHEL 6 x64
RHEL 5
RHEL 5 x64
ESXi 6.0
ESXi 5.5
ESXi 5.1
-
Embedded SATA non-RAID Controller
-
Embedded SATA RAID Controller
- - - - - - -
-
-
Embedded 1GbE NIC
N8103-142
SAS Controller
-
-
N8103-171
RAID Controller (0MB,RAID 0/1)
- - -
N8103-172
RAID Controller (512MB,RAID 0/1)
N8103-173
RAID Controller (512MB,RAID 0/1/5/6)
N8103-174
RAID Controller (1GB,RAID 0/1/5/6)
N8103-168
RAID Controller (1GB,RAID 0/1/5/6)
N8104-138
1000BASE-T adapter
N8104-132
Dual Port 1000BASE-T Adapter
N8104-133
Quad Port 1000BASE-T Adapter
N8104-128
10GBASE Adapter (SFP+/2ch)
Supported PCI cards and Installable Slots
Slots
Part Number
Product Name
#1
#2
#3
#4
N8103-142
SAS Controller
-
N8103-171
RAID Controller (0MB,RAID 0/1)
- - - N8103-172
RAID Controller (512MB,RAID 0/1)
- - - N8103-173
RAID Controller (512MB,RAID 0/1/5/6)
- - -
N8103-174
RAID Controller (1GB,RAID 0/1/5/6)
- - - N8103-168
RAID Controller (1GB,RAID 0/1/5/6)
- - - N8104-138
1000BASE-T adapter
N8104-132
Dual Port 1000BASE-T Adapter
N8104-133
Quad Port 1000BASE-T Adapter
N8104-128
10GBASE Adapter (SFP+/2ch)
-
-
N8117-01A
Serial Port Adapter
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 33
Copyright Notice and Liability Disclaimer
The information contained herein is subject to change without notice.
Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries
Intel , Xeon and Pentium are registered trademarks or trademarks of Intel Corporation or its subsidiaries in
the United States and other countries.
Linux is a trademark of Linus Torvalds.
Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
All other products, brands, or trade names used in this document are trademarks or registered trademarks
of their respective holders.
NEC shall not be liable for technical or editorial errors or omissions contained herein.
For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.
The USB interface is not guaranteed to work properly for all USB devices.
SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110g-E
NEC Corporation Revision 5.0 – April 17, 2015 34
Revision History
Revision
Date
Description
5.0
April 17, 2015
Others:
Added ESXi 6 to the list of operating system supported
4.0
January 28, 2015
Part number changed:
Flash FDD / N8160-96
3.0
November 21, 2014
Discontinued product deleted:
2GB DDR3L-1600 UNB Memory Kit / N8102-523F
2.0
October 16, 2014
Discontinued product deleted:
RDX Cartridge (1.5TB) / N8153-04
Others:
Add Red Hat Linux 7 to the list of operating system supported
Update OS support matrix
1.1
July 24, 2014
Other:
Added a note for N8104-133
1.0
July 18, 2014
Initial release
Loading...