Nec 42VM5, 42VP5, 42XM3 Installation Guide

NEC Solutions (America), Inc.

Visual Systems Division

42VM5/42VP5/42XM3 Installation Guide

42” Plasma Displays v3.8

Contents

Product Description and Notes Page 1
Ventilation Requirements
Display Dimensions
Front, Top & Bottom

Rear

Left & Right Side
Display Dimensions w/Optional Speakers and Stand
Dimensions w/Optional Flat Wall Mount
Dimensions w/Optional Tilt Wall Mount
Dimensions w/Optional Ceiling Mount
Portrait Mode
Connections
Control Codes

Product Description

Type: Plasma Display Screen Surface: 42VM5/42XM3: Anti-Reflective
Resolution: 42VM5/42VP5: 853x480 42VP5: Anti-Glare
42XM3: 1024x768 Dimensions: 40”(W) x 24”(H) x 3.5”(D)
Aspect Ratio: 16:9 Weight: 42VM5/42VP5: 62.8 lbs
Color Correction: NEC CCF (Capsulated Color Filter, in panel) 42XM3: 65.0 lbs
and AccuCrimson (in front filter)

Notes

 This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not

intended to be a step-by step procedure for installation.

 Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local

building codes. All mounts should make secure contact to wood studs.

 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched

horizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual).

 Distances are in inches, for millimeters multiply by 25.4.
 Distances may vary ±5%.

Maximum Tilt Angles

Below are the maximum angles that the display can be tilted in both landscape and portrait mode
Landscape 30°

Portrait 10°

Page 2

Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12

Max Tilt

www.necvisualsystems.com 42VM5/42VP5/42XM3 Page 1 of 12

Ventilation Requirements (all models)

Dimensions below are minimum required for proper ventilation.

2"

NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the
opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for
design review and recommendations.

www.necvisualsystems.com 42VM5/42VP5/42XM3 Page 2 of 12

WALL

WALL

2"

2"

WALL

2"

2"

Display dimensions

0.98

2.52

0.63 1.69

3.11

Ventilation Openings

3.95

0.38

0.79

Ventilation Openings

23.27

34.55

40.08

36.76
Ventilation Openings

33.25

33.03

2.70

0.81

16.81

0.38 1.69 0.6334.690.381.690.63

1.42

0.59

Ventilation Openings

2.72

3.50

5.53

1.30

0.63

1.14

1.38

0.35

1.38

0.98

1.14

0.98

24.02

2.171.34

www.necvisualsystems.com 42VM5/42VP5/42XM3 Page 3 of 12

Display dimensions (cont.)

42VM5/42VP5 Rear View

4.13

Ventilation Openings

20.879.61

5.1212.836.06

7

1

5

3

.

M4*10 MAX

For PC Option

1.78

5

3

.

3

Ventilation Openings

Ventilation Openings

AC IN

+- +-

Ventilation Openings

8.78

1.65

19.21 1.65 8.78

42XM3 Rear View (rear ventilation different)

4.13

6.06 12.83 5.12

9.61 20.87 9.61
Ventilation Openings

1.67

1.77

4.02

Ventilation Openings

AC IN

8.78 1.65 19.21 1.65 8.78

17.52

M4*10 MAX

For PC Option

Ventilation Openings

Ventilation Openings

+- +-

1.67

1.77

4.02

www.necvisualsystems.com 42VM5/42VP5/42XM3 Page 4 of 12

9.61

8-M4*14 MAX

For Mount

8-M4*14MAX

For Mount

4.724.96 4.96

5.12

4.25

4.25 4.96 5.12 4.96 4.72